Used Mahros Brush for sale (1,579)

Condition: new, Year of construction: 2026, The side brush for the ZP7500 CORMAK sweeper is a practical additional accessory that significantly improves the machine’s performance. It is responsible for thoroughly sweeping hard-to-reach areas—along walls, shelves, curbs, and in corners where the main brush cannot reach. As a result, surfaces are cleaner after just one pass, without the need for touch-ups. Using a side brush also increases the sweeper’s working width, which directly translates into higher productivity. In practice, this means faster cleaning of large areas such as warehouses, yards, or parking lots. The solid construction and wear-resistant bristles ensure a long service life, even under intensive use. The brush is designed for demanding conditions—it effectively collects both fine dust and larger debris such as sand, leaves, or gravel. The brush construction is adapted for operation in challenging industrial environments—resistant to mechanical damage and heavy use. Installation and removal are quick and intuitive, making replacement or servicing easy without downtime. Key benefits: precise sweeping along edges and in corners increased working width and higher efficiency effective collection of both fine and larger debris Kedsyvp Ngspfx Abfslu reduced manual labor and fewer passes required durable, wear-resistant bristles quick installation and convenient operation

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Kjdpfxopu R Ngj Abfjlu Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2,2 / 2,8 kW Mains connection 380 Volt, 50 Hz - Material support - New deburring brush - Suction connection Ø 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition

Condition: new, Year of construction: 2026, functionality: fully functional, Rusticating machine for wooden artifacts such as bead boards,profiles.joists and floorboards ,with maximum width 40 or 60 cm x 30 cm height. Equipped with integrated 45 mm diameter motor-shaft assembly to ensure maximum rigidity, dynamically balanced brushes at high speed to work vibration-free. The machine consists of two brushing units that are independent of each other; the first unit (steel brush) is used for roughing while the second (silicon carbide brush) is used for finishing.It is possible to vary the degree of rustication by setting the working depth. Kedpeh Auu Ajfx Abfslu

Condition: good (used), Year of construction: 1991, machine/vehicle number: ST-B-1661, Offer 24154 Technical data: - Brush diameter 250 mm - Brush width 60 mm - Disc speed 1500 / 3000 rpm - Drive 400 V / 1.0 / 1.4 kW - Working height 900 mm - Space requirement approx. W 650 x H 1150 x D 450 mm Kodpfxotwmv Es Abfolu - Weight approx. 100 kg

Year of construction: 1990, condition: good (used), - double sided brishing / deburring machine Metabo 7445 / Metabo 72730 - 4 kW - shaft diam. 35 mm Kjdpfx Abjbdm Tajfjlu - 1500 rpm

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: Klodpfx Abexrb Rfjfeu - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer: Fladder - Type. Gyro 300 VAC Ex - Working width 1300 mm - Year of construction 1999 - Number of brush heads 6 pcs. - Rotating and oscillating sanding unit - 2 vacuum fans- Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection switch cabinet 1, machine 10kW - Electrical connection switch cabinet 2, vacuum fan, 15kW - Feed infinitely variable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm Kledpjvwa Drefx Abfeu - Weight 2300 kg - Separate switch cabinet, Dimensions: W: 800mm, Depth: 400mm, Height: 1700mm - Location, in stock - Volt, HZ 400 / 50

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer Fladder - Type Gyro 300 VAC Ex - Working width 1300 mm - Year of manufacture 1999 - Number of brush heads 6 pcs. - Rotating and oscillating grinding unit - 2 vacuum fans - Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection control cabinet Klsdjvvl H Njpfx Abfeu - Feed continuously adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate control cabinet, Dimensions: W: 800 mm, depth: 400 mm, height: 1700 mm - Location, in the warehouse - Volt, HZ 400 / 50

Year of construction: 2016, condition: excellent (used), This plant was used to sort and convey small brushes. Very good condition and was little used. There are two plants available. Kljdpfx Abshit Rwefsu

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: 07764, We offer this used manual brushing equipment Tonello Scratch O, year of manufacture 2018. Machine type: Scratch O Serial number: 07764 Year of manufacture: 2016 Compressed air pressure: 7 bar Weight: 36 kg Kedpfx Abjyt I Hwofolu If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Extraction connection: 2 x 120 mm Feed speed: infinitely adjustable 2.5 - 10 m/min Standard equipment - Maintenance interval control - Plain text error messages - Constant infeed height – fixed table, 900 mm Kjdpfxew Axi Ao Abfjlu - Electric height adjustment incl. fine adjustment from the control panel - Feed speed steplessly adjustable from 2.5 to 10 m/min via inverter at the control panel - Endless belt conveyor - Automatic feed mat centering - 1st brush unit with selectable steel brush, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - Dimensions: 1455 x 1070 x 1250 mm - Required air pressure: 6 bar Optional equipment 022 7.5 HP (5.5 kW) motor power, 1st unit 024 7.5 HP (5.5 kW) motor power, 2nd unit 027 Oscillation control for 1st and 2nd brush units 028 Opening height 250 mm instead of 200 mm

Condition: used, Brush deburring machine, presumably BAUER Year of manufacture: approx. 1985 Brush diameter: 250 / 300 mm Brush width: 20–60 mm Speed: 1500 / 3000 rpm Power: approx. 2 / 3 kW Mains connection: 380 Volt, 50 Hz - with table base Required space (L x W x H): 700 x 600 x 1250 mm Weight: 120 kg Kedpfjxrgupex Abfjlu In good condition

Condition: like new (used), Working width 600 mm Two brushing rollers Two 4 kW motors Infinitely variable feed speed Klsdpfeytp Tfsx Abfou Roller height adjustment (up/down) Power supply 400V 650 kg Year of manufacture: 2021

Condition: ready for operation (used), Year of construction: 2018, A custom-built wide brush ferrule mounting stapling machine for mounting the brush ferrule onto the handle and for mechanical fixation by staples is available. Stapling units top/bottom: 1/1, brush widths: 25mm/50mm/75mm/100mm, additional brush sizes: 35mm/60mm. Documentation available. An on-site inspection is possible. Kledpfx Aeyr Rw Ajbfju

Condition: new, Year of construction: 2025, Working width: 600 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, centrally adjustable electrically with fine offset adjustment Ksdpfx Aboxwnilofslu 1st brush: Metal brush, diameter 210 mm 2nd brush: Tynex brush, grit 80, diameter 210 mm Height adjustment: electric Height display: mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 4 kW Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Condition: new, Sarmax CHEYENNE SP2 600 Brush Aging Machine Working width: 600 mm Maximum working height: 300 mm Transport belt with adjustable speed: 3–15 m/min Includes: steel brush + tynex brush Total power: 9 kW Technical documentation CE certificate Brand new machine available on order Ksdpfx Aeyf Dclsbfjlu

Condition: new, functionality: fully functional, Aging brush machine Sarmax CHEYENNE SP2 400 Ksdpfx Aboyf Av Rofelu working width 400 mm maximum working height 300 mm conveyor belt with adjustable speed 3–15 m/min includes steel brush and tynex brush Total power 7 kW technical documentation CE certificate Brand new machine available on order

Condition: ready for operation (used), Year of construction: 1977, A roller wide belt brushing machine Tilleke is available. Working width: 700mm, Machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, Weight: approx. 750kg. An on-site inspection is possible. Kodpfxjynltqe Abfolu

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 10999, DESCRIPTION Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Bthgq0Ygu0 Working width: 290 mm Grinding thickness: 2-200 mm Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Electric height adjustment, 0.37 kW Kljdpfov Dfp Hox Abfou Adjustable feed, 6/11/16 m/min. Compressed air: 6-8 bar Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg

Condition: good (used), Year of construction: 1991, Fladder SC 300 / 1000 finishing and brushing machine Year of manufacture 1991 Manufacturer Fladder System Denmark S/N 560 Machine height 2210 mm Machine width incl. carousel 4000 mm Machine length incl. carousel 4500 mm Ksdpfx Askwcxyebfelu working height carousel 800 mm Working width 1200 mm Max. Workpiece height 100 mm throughput speed 0,3 - 10,0 m/min. lock-itTM spindles and length 6 x Ø100 x 350 mm Voltage 3 x 400/500V - 50/60Hz Max./min. Fuse 32 A Max. Power consumption 15 kW Suction 2500 m3/h Net weight 1700 kg

Condition: used, Automatic cutting, brushing & washing, drying, made RSA Entry length: 12.000mm Exit length: 30 - 1.000 mm In packed condition – ready to be delivered. Kledpfx Aeymarlsbfou Entry length: 12.000mm Exit length: 30 - 1.000 mm Diameter: 12 - 80 mm

Condition: excellent (used), Year of construction: 1994, Motor data: 380 V - 50 Hz - 62 A 2 grinding units Burste electric height adjustment grinding width: 1100 mm operating pressure: approx. 8 bar grinding belt length: 2150 x 1130 mm Kledpfegg R Trjx Abfou weight: approx. 3500 kg dimensions: W/D/H approx. 2100/2500/2300 mm

Condition: new, Working width: 600 mm Maximum element height: 300 mm Feed speed: 4-12 m / min Kljdpfx Aogpgyqebfju Engine power: 2x4 kW Power supply: 400V Manual height adjustment of the working unit Independent positioning of the first and second work units Safety switch 2 brushes included

Condition: new, Year of construction: 2026, The brush grinding machine with a base, equipped with 250 mm diameter wire brushes included in the set, makes this model ideal for both professional applications and hobbyists. The stable and rigid construction ensures quiet operation with no vibrations. Description of the CORMAK BMS2080 twin-brush sander Rotor design based on bearings from the world's best manufacturer NSK, for quiet and smooth operation and long machine life Powerful drive motor with high torque Main switch and safety ‘mushroom’ switch Adjustable, sturdy workpiece supports Robust, stable base with tool cabinet Equipped with 50 mm diameter suction port, with possibility of connecting an extraction unit Technical data of the grinder BMS2080 SANDER DISPLAY SIZE 250 x 80 mm Klodpjvlkm Tjfx Abfeu disc or grinding wheel bore 25,4 mm suction nozzle diameter 2 x 50 mm RPM NUMBER 1450 rpm MOTOR POWER S1 2,2 kW MOTOR POWER S6 3,0 kW VOLTAGE 400 V DIMENSIONS 800 x 440 x 1170 mm WEIGHT OK. 95 kg

Condition: new, Year of construction: 2026, CORMAK BMS250 Brush and Disc Multifunctional Sander – A Modern and Efficient Solution for Industrial Use The CORMAK BMS250 multifunctional brush and disc sander is a modern and high-performance combination machine designed for industrial, workshop, and woodworking applications. By integrating both brushing and disc sanding functions, this unit ensures maximum flexibility and efficiency when working with metal, wood, and plastics. Fitted with high-quality NSK bearings, the machine operates exceptionally quietly, smoothly, and reliably over extended periods. This feature sets it apart from competitors and guarantees professional performance. The brush sander with a stable stand features a balanced rotor mounted on ball bearings and a powerful motor with copper windings, providing high torque – essential for intensive sanding tasks. An integrated 60 mm dust extraction port allows for easy connection to an extraction system, improving both work comfort and operator safety. Additionally, the CORMAK BMS250 disc sander comes with an adjustable work rest and an IP54-rated enclosure, ensuring precise operation and protection for the user. If you're looking for a dependable bench sander with versatile capabilities, the BMS250 model will meet the demands of even the most discerning professionals. Key Features: Combined brush and disc sander – maximum versatility Industrial-grade NSK bearings – quiet operation and long lifespan Suitable for sanding metal, wood, and plastics – wide range of applications Copper-wound motor – durability and high performance 60 mm dust extraction port – clean and safe workspace Stable base – ergonomic and comfortable operation Technical Specifications: Specification Value Disc size 250 x 32 mm Disc bore diameter 32 mm Disc grit K 36 Rotational speed 2960 rpm Motor power (S1 continuous duty) 0.9 kW Motor power (S6 intermittent) 1.5 kW Dust extraction port diameter 60 mm Voltage 400 V Dimensions 600 x 400 x 1130 mm Weight 24 kg S1 – Motor power for continuous operation under full load S6 – Motor power for intermittent operation with idle periods of up to 40% Klsdsxfgz Nepfx Abfeu