Used Lvd Wila P10.12 W20 + T12.20 for sale (398)

Condition: new, Year of construction: 2024, color: blue, new (ONE-WAY) 20FT HIGH CUBE DV 9'6" container Internal dimensions: 5.90 x 2.35 x 2.70 m (LxWxH) 5 lashing rings left and right on the floor and ceiling Colour: Blue (RAL: 5013) Available: 3 units = Further Information = General Information Year of manufacture: Sept. 2024 Nljdpfxszx Sz Is Af Seg Model year: 2024 Dimensions Dimensions (L x W x H): 6056 x 244 x 290 cm Weights Unladen weight: 2,240 kg Payload: 28,240 kg Gross weight: 30,480 kg Condition General condition: very good Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for further information.

Condition: used, Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible. Nlodpfx Afozxr N Sj Seg

Condition: new, Year of construction: 2024, table load: 2,000 kg, Welding turntable, 2000 kg load capacity with manual and foot-operated remote control Diameter 1200 mm Bore diameter 100 mm Height 580 mm Nsdpogfqk Tjfx Af Solg Variable speed 0 - 0.6 RPM AC 380 V motor

Condition: new, Year of construction: 2024, Protec Welding Positioner, 20,000 kg load capacity Speed continuously adjustable, 0.05 - 0.35 RPM Handheld remote control Foot-operated remote control, additional cost: €390.00 Height: 700 mm Diameter: 2000 mm Njdpfx Ajid Szkjf Selg

Condition: good (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Vacuum evaporator-concentrator for for the treatment of water-based liquids and effluents by low-temperature evaporation, forced circulation and external heat exchangers. Maximum nominal distillate production: 20,000 litres/24 h (834 l/h, ±10%). Boiler working volume: 1,540 litres. Approximate evaporation temperature: 30–60°C. Operating vacuum: 4–18 kPa absolute. Electrical supply: 400 V, three-phase, 50 Hz. Electrical power consumption: 13 kW. Rated current: 29 A. Specific electrical consumption: 16 Wh/l ±10%. Required thermal power: 593 kW. Hot-water inlet temperature: 80–90°C. Cooling-water inlet temperature: 10–30°C. Compressed-air pressure: up to 8 bar. Approximate empty weight: 2,550 kg; maximum operating weight: 4,500 kg. Approximate transport dimensions: 4,850 × 2,000 × 2,760 mm. Main construction in stainless steel. Equipped with an evaporation chamber, liquid-ring vacuum pump, circulation pump, heating heat exchanger, condenser, distillate tank and discharge pump, pneumatic valves, PLC, touchscreen and instrumentation for level, pressure, temperature and flow measurement. Maximum permissible concentrate density: 1.3 kg/dm³. Maximum viscosity: 10 cP. Maximum recommended particle size: 800 microns. Maximum inlet-liquid temperature: 70°C. Noise emission below 80 dB(A). Not suitable for flammable, explosive, radioactive or chemically incompatible liquids. Nedjzvdftepfx Af Sslg

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (by phone) directly. Holp VarioBucket / VL.112.700 / CW20 CW30 CW40 / HARDOX / Wear Plates / NEW / in stock & immediately available Price: €6,045.00 net / €7,193.55 gross - Excavator weight class: 14 t – 25 t - Own weight approx.: 570 kg - SAE capacity: 700 liters - Ditching angle: 54° - Base radius: 150 mm - Includes wear plates - The bucket is manufactured entirely from HARDOX. Advantages of the Holp VarioBucket: - Large surface area - Robust design with premium materials - Minimal weight due to optimized triangular construction - Rounded bottom - Two working openings - Rectangular working opening - V-shaped - The VarioBucket stands out for its high performance and precise operation. The V-shaped opening enables targeted pouring, while offering very high trench cleaning performance when dragged. Wherever greater speed and flexibility are required for handling a variety of tasks, the VarioBucket delivers real benefits on the job site: it is faster, more adaptable, and safer. We have a wide range of other Holp products in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. On request, we can also provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Nodpfx Afjyhyllo Sslg We supply the complete Holp range for you! Errors and prior sale excepted! = More information = New: Yes Intended use: Construction Unladen weight: 570 kg Please contact Marius Herden for further information.

Condition: defective spare-parts repository (used), Year of construction: 2022, FOR SPARE PARTS ONLY Nodozv N Hcepfx Af Selg DRIVES, MOTORS, CHIP CONVEYORS, PUMPS, ETC., IN AS-NEW CONDITION.

Condition: new, functionality: fully functional, The Baumüller DS2-160MO54W-20-5-AO is a high-performance three-phase synchronous servomotor. These motors are designed for demanding industrial applications and feature high dynamic performance and water cooling (IP54 rating). Key specifications: • Series: DS2 Nsdpfxjzr H N Hs Af Sslg • Frame size: 160 • Rotor length: M (Medium) • Protection / Cooling: IP54, water cooling (W) • Winding and rated parameters: These motors achieve high power outputs (e.g., at a speed of 2000 rpm, the power output is in the range of tens of kilowatts).

Condition: new, functionality: fully functional, The Baumüller DS2-160MO54W-20-5-AO is a high-performance three-phase synchronous servomotor. These motors are designed for demanding industrial applications and feature high dynamic performance and water cooling (IP54 rating). Key specifications: • Series: DS2 • Frame size: 160 Nsdpfxjzr H Shj Af Selg • Rotor length: M (Medium) • Protection / Cooling: IP54, water cooling (W) • Winding and rated parameters: These motors achieve high power outputs (e.g., at a speed of 2000 rpm, the power output is in the range of tens of kilowatts).

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Nledpfxezvnfws Af Sog Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Year of construction: 2021, condition: used, Load capacity: 2000kg, support surface per table X/Y: 1400mm/900mm, tilting angle: 100°, travel of the movable table: approx. 300mm, drive: hydraulic, control: PLC, operating modes: manual/automatic, collision avoidance in manual operation via table position and table inclination. Equipment: heavy-duty rollers, therefore movable. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1300mm, weight: 1310kg. Documentation available. Inspection possible by arrangement. Nledpfszu Sztox Af Sjg

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 860 mm, total width: 1,400 mm, total length: 600 mm, type of input current: three-phase, overall weight: 150 kg, input voltage: 400 V, temperature: 90 °C, water tank capacity: 220 l, warranty duration: 36 months, height adjustment type: mechanical, Equipment: documentation/manual, PW-200 is a bath pasteurizer designed for thermal processing of packaged products in a water bath. The model works well with jars, glass bottles, PET bottles, cans and other packaging suitable for pasteurization. Technical data: Construction material: AISI 304 stainless steel Nedpfxotyvvmj Af Solg Power supply voltage: 400 V Connected load: 12 kW Electric heater power: 12 kW (2 × 6 kW) Temperature setting via controller (Mikster) Product temperature sensor 4 loading baskets – dimensions: 240 × 386 × 340 mm Insulated tank Tank capacity: 200 L Number of loading baskets: 4 Basket dimensions: 240 × 386 × 340 mm (height)

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Nlsdpfjvripyex Af Sog

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Nlodpfxox Hff Ss Af Sjg

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 45 - 3500 [rpm] - Max. chuck diameter : 210 [mm] MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 45 - 3500 [rpm] - Max. chuck diameter : 210 [mm] Nedpfozf Rapsx Af Solg TURRET 1 - Number of positions : 10 - X/Z stroke : 190 / 170 [mm] TURRET 2 - Number of positions : 10 - X/Z stroke : 190 / 170 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 73 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3900 x 2130 [mm] - Machine height : 2350 [mm] - Machine weight : 7200 [kg] EQUIPMENT - CNC : Fanuc 32i - Interface : USB / PCMCIA - 3 colors status lamp - Tool monitoring - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor : DROITE - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 45 - 3500 [rpm] - Max. chuck diameter : 210 [mm] MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] Nljdezf Ravspfx Af Sog - Spindle speeds : 45 - 3500 [rpm] - Max. chuck diameter : 210 [mm] TURRET 1 - Number of positions : 10 - X/Z stroke : 190 / 170 [mm] TURRET 2 - Number of positions : 10 - X/Z stroke : 190 / 170 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 73 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3900 x 2130 [mm] - Machine height : 2350 [mm] - Machine weight : 7200 [kg] EQUIPMENT - CNC : Fanuc 32i - Interface : USB / PCMCIA - 3 colors status lamp - Tool monitoring - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor : DROITE - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 45 - 3500 [rpm] - Max. chuck diameter : 210 [mm] MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 45 - 3500 [rpm] - Max. chuck diameter : 210 [mm] TURRET 1 - Number of positions : 10 - X/Z stroke : 190 / 170 [mm] TURRET 2 - Number of positions : 10 - X/Z stroke : 190 / 170 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 73 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3900 x 2130 [mm] - Machine height : 2350 [mm] - Machine weight : 7200 [kg] Nljdszf Ra Aepfx Af Seg EQUIPMENT - CNC : Fanuc 32i - Interface : USB / PCMCIA - 3 colors status lamp - Tool monitoring - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor : DROITE - Electric transformer

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: Nlsdpfsw E H E Rox Af Sog - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: good (used), Manufacturer: WMW VEB Nedoik Hcuopfx Af Sjlg Type: FW 200×630 x-y-z travel: 380 – 140 – 230 mm Table size: 200x630mm

Condition: used, mileage: 947,152 km, power: 353 kW (479.95 HP), first registration: 09/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: yellow, gearing type: mechanical, emission class: euro5, total length: 8,650 mm, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), had accident, parking heater, The vehicle has several error messages, and the current mileage cannot be read! Comfort and Interior Features: * Cab: High-roof 'LX', 2240 mm wide, 2280 mm long * Seats: Comfort seat for driver (air-suspended, lumbar support, shoulder adjustment, heating), passenger seat with longitudinal, backrest, and height adjustment * Air Conditioning: AC R134A, CFC-free, automatic temperature control * Heating: Auxiliary air heater EBERSPÄCHER D4S, heater for fuel filter * Sleeper Berth: 1 sleeper berth with storage space and mattress, pillow * Storage Compartments: Various storage compartments, drawer in the dashboard, waste container * Electric Windows: For driver and passenger * Central Locking * Multifunction Steering Wheel * Radio: MAN BasicLine 24V, preparation for hands-free system * Instrument Panel: km/h 'Base-Line', display for operating data, language: German and English ----Safety and Assistance Systems * Cruise Control * Speed Limiter (85 km/h) * Hill Start Assist ----Lights & Visibility * Headlight Leveling * Additional Headlights: High and low beam headlights, work lights on the cab roof * Rotating Beacons: 2 yellow halogen rotating beacons * Mirrors: Curb mirror, EU front mirror, rear and wide-angle mirrors (heated, electrically adjustable) * Sun Visor: Inside and outside ----Engine & Transmission * Engine: D2676LF05, 480 hp / 353 kW, EURO5, 2300 Nm, with OBD+NOx sensor * Transmission: ZF 16 S 232 DD with ZF Intarder, MAN ComfortShift * Axles: Front axle VOK-08, rear axle Hypoid HY-1350 * Tag axle NOL-08, steerable and liftable * Differential Lock: In the rear axle ----Chassis and Brakes * Front Springs: Parabolic, 8.0 t * Rear Springs: Air suspension for high center of gravity * Brakes: Electronic braking system (MAN BrakeMatic), disc brakes front and rear, Anti-lock Braking System (ABS), Traction Control System (ASR), asbestos-free brake pads * Additional Features: Digital axle load indicator, ECAS air suspension system, additional reservoir for air suspension ----Body * VDL S-21-5900 Roll-off tipper, year 2008 ---- * Tire Dimension Front Axle: 385/65R22.5 * Tire Dimension Rear Axle: 315/80R22.5 * Fuel Tank: 2x 600 liters * AdBlue Tank: / * Technically Permissible Total Weight: 26000 kg * Unladen Weight: 12540 kg * Permissible Trailer Load: 24000 kg * Overall Length: 8650 mm * Wheelbase: 4500 mm * Next Inspection: / ----Vehicle Number/Vehicle: 12369 Nlsdpfx Afszrrk Ao Sjg ----Errors and prior sale are subject to change----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all formalities that arise when purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: ----Trade-in of your old vehicle, TÜV/SP inspection, Complete export processing, Arranging financing, Applying for export license plates, Vehicle transport, Vehicle registration, Recovery and vehicle transport----YOUR VTS TEAM

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 11/1996, loading space length: 7,450 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total width: 2,590 mm, suspension: air, tire size: 265/70R19,5, wheelbase: 5,100 mm, Year of construction: 1996, Equipment: tail-lift, = Additional Options and Accessories = - Air suspension - Spare wheel = Further Information = Axle configuration Tire size: 265/70R19.5 Brakes: Drum brakes Suspension: Air suspension Front axle: Dual tires; Max. axle load: 10,000 kg; Steerable Rear axle: Dual tires; Max. axle load: 10,000 kg Weights Unladen weight: 5,260 kg Payload: 14,740 kg GVW: 20,000 kg Functional Tail lift: Dhollandia DHLSU11, rear door, 2,000 kg Maintenance APK (Technical Inspection): valid until 01/2027 Njdpjzrm Rkjfx Af Sslg Identification License plate: WR-70-NH Further Information Please contact Maurits Van Giessen for more information.

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2-021-810-002, Offer 25221 Technical data: - Load capacity: 2000 kg - Outreach: approx. 3000 mm - Slewing radius: approx. 180° - 2 lifting speeds: approx. 3.0 + 0.75 m/min Nsdpowvtpdjfx Af Sjlg - Hook travel: approx. 3000 mm - Chain hoist control via hand remote pendant - Manual slewing of boom + manual trolley travel - Boom IPE 300 - Overall height with slewing arm holder: approx. 1220 mm - Power connection: 400 V - Weight: approx. 500 kg - Test book

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2015, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 9,310 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,060 mm, Year of construction: 2015, Equipment: ABS, = Additional options and accessories = - ADR - BPW axles Nljdezab T Repfx Af Sjg - EBS - Air suspension - Drum brakes = Notes = Beautiful 2015 VAN HOOL 20FT + 30FT galvanized ADR chassis with ABS/EBS, BPW axles with drum brakes, ADR (EX/II, EX/III, FL, AT) valid until 03.09.2026, for 1x 20FT or 1x 20FT SWAP or 1x 30FT tank container, unladen weight: 3,760 kg, permissible total weight: 39,000 kg, tires 385/65-R22.5 (L: 10/12/11mm; R: 9/8/10mm), Dutch registration with valid main inspection (APK) until 03.09.2026 + NEW 20FT FLATRACK TRANSPORTER, hardwood floor, shunting aids, unladen weight: 1,600 kg, payload: 28,880 kg, permissible total weight: 30,480 kg. = Further information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; tire tread depth left: 60%; tire tread depth right: 55% Rear axle 2: Max. axle load: 9000 kg; tire tread depth left: 75%; tire tread depth right: 50% Rear axle 3: Max. axle load: 9000 kg; tire tread depth left: 70%; tire tread depth right: 60% Weights Unladen weight: 3,760 kg Payload: 35,240 kg GVW: 39,000 kg Functional Body brand: Van Hool A3C002 Condition Technical condition: very good Optical condition: very good Identification License plate: ON-68-VS Further information Please contact Arne Honingh for further information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2015, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 9,310 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,060 mm, Year of construction: 2015, Equipment: ABS, = Additional Options and Accessories = - ADR - BPW axles Nlsdpszab Tksfx Af Sog - EBS - Air suspension - Drum brakes = Notes = Beautiful 2015 VAN HOOL 20FT + 30FT galvanized ADR chassis with ABS/EBS, BPW axles with drum brakes, ADR (EX/II, EX/III, FL, AT) valid until 03.09.2026, for 1x 20FT or 1x 20FT SWAP or 1x 30FT tank container, tare weight: 3,760 kg, permissible gross weight: 39,000 kg, tires 385/65-R22.5 (L: 10/12/11mm; R: 9/8/10mm), Dutch registration with valid main inspection (APK) until 03.09.2026 + NEW 20FT FLATRACK TRANSPORTER, hardwood floor, shunting aids, tare weight: 1,600 kg, payload: 28,880 kg, permissible gross weight: 30,480 kg = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; tire tread left: 60%; tire tread right: 55% Rear axle 2: Max. axle load: 9,000 kg; tire tread left: 75%; tire tread right: 50% Rear axle 3: Max. axle load: 9,000 kg; tire tread left: 70%; tire tread right: 60% Weights Tare weight: 3,760 kg Payload: 35,240 kg GVW: 39,000 kg Functional Body brand: Van Hool A3C002 Condition Technical condition: very good Optical condition: very good Identification License plate: ON-68-VS Further information Please contact Arne Honingh for further information.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Beschreibung: 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2001 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 550 mm Nsdpfx Afjzl T Sns Sjlg Öffnungsweg: 700 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC200 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung