Used Loader - Transomat for sale (3,789)

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Fodpfxoz Dmn Re Akyjpn Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: excellent (used), power: 85 kW (115.57 HP), fuel type: diesel, color: other, lifting height: 3,850 mm, Year of construction: 2018, operating hours: 6,989 h, Equipment: air conditioning, GVW: 9.500 kg Dimensions (LxBxH): 722 x 226 x 311 cm Chassis type: articulated Steering: articulated Engine type: Caterpillar C4.4 ACERT Quick coupler system: Yes CE mark: yes Technical condition: very good Fpodpfjz Dqzzex Akyjn Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Blower - Central lubrication - Hydraulic quick coupler - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Country of production: Engeland Condition CE type: CE Hydraulic quick coupler, central lubrication, 20 km/h

Condition: good (used), axle configuration: 2 axles, first registration: 02/1968, color: blue, Year of construction: 1968, Rear axle 1: Double wheels Rear axle 2: Double wheels Empty weight: 7.325 kg Carrying capacity: 24.675 kg GVW: 32.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information Fpodpez Dw D Nsfx Akyjn Fruehauf / Hydraulic Ramps / 32 Ton

Condition: used, Year of construction: 2022, operating hours: 3,555 h, load capacity: 2,000 kg, lifting height: 3,850 mm, fuel type: diesel, construction height: 2,546 mm, gearing type: automatic, Equipment: head guard, Linde H20D Diesel Counterbalance Forklift ? 2.0t Lifting Capacity ? 3.85m Lift Height ? Overhead Guard ? Very Well Maintained For sale is a reliable Linde H20D diesel forklift with a lifting capacity of 2,000 kg. The unit impresses with its proven hydrostatic drive and high-quality build. The forklift is equipped with a standard mast (lifting height 3,850 mm) and 1,200 mm forks, making it ideal for warehouse, industrial, and logistics applications. Features: * LED work lights front and rear * BlueSpot warning system * Comfort seat, imitation leather * Roof, front, and rear windshields * Panoramic interior mirror * Hydrostatic drive * Height-adjustable steering column * Forks 1,200 mm Fpsdpjyrkn Ujfx Akyen If you have any questions, we are at your disposal at any time.

Condition: excellent (used), gearing type: automatic, fuel type: diesel, color: other, first registration: 06/2020, Year of construction: 2020, operating hours: 8,268 h, Condition CE type: CE = More information = Technical condition: very good Visual appearance: very good Price: On request Registration number: T-23-DZR = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A Fpsdpfjz Avx Sjx Akyon

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 636, type of input current: three-phase, total width: 1,800 mm, input voltage: 400 V, input current: 10 A, lifting height: 2,000 mm, load capacity: 250 kg, 31 C – Gerber LS-250-LU Automatic Fabric Loading System – Industrial Spreading Line Unit Description For sale is a Gerber automatic fabric loading system (Model 250 LU), designed for seamless integration into industrial fabric spreading and cutting lines. This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly improving workflow and reducing manual labor in high-volume production environments. The system has been operated as part of a complete and synchronized production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This setup allows a continuous workflow from roll loading to spreading and cutting, minimizing downtime and maximizing throughput. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video in working condition taken 5.3.2026. Includes • Gerber automatic fabric loading unit • Motorized lifting and roller feed system • Adjustable frame structure Fpedpfey Av H Sjx Akysn • Integrated control panel and switches • Heavy-duty steel frame with wheels Technical Details • Manufacturer: Gerber Technology • Model: LS-250-LU (Loading Unit) • Year: 2004 • Serial number: 636 • Type: Automatic fabric roll loading system • Lifting capacity: up to 250 kg • Machine weight: approx. 300 kg • Voltage: 3 × 380 V • Frequency: 50 Hz • Current: approx. 10 A System Functionality • Automated lifting and positioning of fabric rolls • Precise alignment with spreading machines • Smooth and controlled feeding into spreading systems • Mobile design allows flexible positioning between lines Production Advantages • Eliminates manual lifting of heavy fabric rolls • Improves operator safety and ergonomics • Reduces downtime during roll changes • Enables continuous, high-efficiency production flow • Ensures consistent material alignment for spreading Integration • Designed for use with Gerber spreading systems (e.g. SY 101) • Fully compatible with automated cutting lines (e.g. Lectra Vector systems) • Suitable for synchronized production environments Condition Used industrial condition Recently serviced on 27.02.2026 Operational prior to factory shutdown Typical signs of industrial use Inspection recommended prior to purchase Sold as-is, where-is, without warranty Typical Applications • Fabric spreading lines • Textile production workflows • Cutting room automation • High-volume garment manufacturing Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional handling recommended due to size and weight

Condition: used, Year of construction: 2020, Due to the large number of unserious emails, not all emails will be answered. WhatsApp RX 70-35 Diesel Hybrid, year of manufacture 2020, ready to drive Fodpfxoz Edv Io Akyepn RX 70-35 Gas, year of manufacture 2020, ready to drive RX 70-35 Gas, year of manufacture 2020, for spare parts RX 70-45 Gas, year of manufacture 2020, for spare parts RX 70-70 Diesel-Hybrid, year of manufacture 2018, for spare parts "ERRORS, TYPOS, AND PRIOR SALE EXCLUDED"

Condition: used, axle configuration: > 3 axles, first registration: 01/2023, Year of construction: 2023, Number of axles: 8 Axle type: Swinging axles Steering: Hydraulic Suspension type: Hydraulic Tires: 245/70 R17.5 Kingpin: 3.5" Color: RAL 5009 Azure Blue Gooseneck length: 3700 mm Overall width of the vehicle: 2990 mm Fpedpfx Ajz Ed D Eokyon Platform length: 15000 mm Telescopic: Yes / Length of extension 1: 8000 mm Saddle height: 1415 mm Saddle load: 30,000 kg Axle load: 96,000 kg Tare weight: 36,200 kg Maximum permissible load: 126,000 kg Payload: 89,800 kg

Condition: new, NEW ! all stainless steel suitable for eurobins of 200L discharging height : ± 1.150 mm Fedpoz Ep Atsfx Akyopn 0,37 kW can be operated from both sides mobile loading : max. 350 kg dimensions (l x w x h) : ± 1.020 x 1.250 x 1.150 mm

Condition: new, maximum load weight: 30,160 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with immediately and shortly available vehicles on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Frame: Steel welded construction with a front frame bend, front corners chamfered and a chamfer at the rear. Access ramp with excavator bucket recess in the center = a recess at the rear between the longitudinal beams, approx. 2,300 mm long, integrated into the outer frame. - 4 pairs of approx. 4-tonne lashing points - 7 pairs of recessed, retractable approx. 10-tonne lashing rings (2 x on the raised platform, 1 x in the front bend slope, 3 x in the low bed between the wheel wells, and 1 x in the access ramp) - 2 pairs of wheel wells - 1 pair of wheel wells, approx. 2,300/1,270 x 400 mm (L1/L2 x W), in front of the bend, including a one-piece, drive-over aluminum cover, for a maximum surface load of approx. 11,650 daN/piece. - 1 pair of wheel wells, approx. 1,390/590 x 270 mm (L1/L2 x W), between the 3rd and 4th axles, including a one-piece, drive-over aluminum cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700-3,600 mm, with wheel diameters of approx. 1,485-1,740 mm, maximum rear overhang of the wheel loader of 2,220 mm. - Width between the wheel wells approx. 1,255 mm (= outer/outer longitudinal beam) Frame attachments: - 5 pairs of mounting pockets in the outer frame for rectangular tube supports, approx. 100x50x5 mm (3 x in the low bed and 2 x on the raised platform). - Without rectangular tube supports. Fpsdpfx Akoz Ed Azsyen - On both sides of the low bed platform, retractable widening extensions with softwood planks approx. 50 mm (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm). - 4 pairs of folding approx. 10-tonne lashing rings, arrangement: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair at the very rear in the excavator bucket recess, left and right; 1 pair at the front of the raised platform, in front of the bend, inside the longitudinal beams; 1 pair in the low bed at the rear in front of the access ramp, in the excavator bucket recess, left and right. Towing device: - Fixed drawbar with approx. 50 mm heavy-duty towing eye, bent design, silent block bearing, drawbar locking spring with tensioner. - Truck coupling height from approx. 820 mm to approx. 1,010 mm. - Drawbar length approx. 1,800 mm. Support system: - 2 hydraulic supports at the rear, to be operated individually, control unit housed in a separate stainless steel box. Axles: - SAF air suspension low loader axles with drum brakes, load capacity approx. 11 tonnes/axle, S-cam brake approx. 300/200 mm, automatic brake linkage adjustment. Wheels: - 16 wheels, tires 245/70 R 17.5, 146/146F, manufacturer Conti HTR2 (tire load capacity approx. 12 tonnes/axle). Braking system/suspension: - Braking system according to ECE regulation R13, two-line pneumatic braking system. - Braking system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed, RSS/RSP stability program, spring brake parking brake on 3rd and 4th axles. - Aluminum air reservoirs for a total weight of 44 tonnes. - Brake/air connection lines with 2 individual coupling heads, yellow/red. - EBS/ABS connection cable. - Rubber strap as a holder for EBS and electrical plugs. - Air suspension with lifting and lowering device, to be operated separately at the front and rear. - Automatic adjustmen

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Used EBERT forestry semi-trailer, low-bed trailer, type: TLS 36 ST, VIN: W0985180080D17001 self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS First registration: 03/2008, Permissible gross weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5 low-profile, tubeless. Tire tread: 1st axle 9-12 mm, 2nd axle 7-11 mm Axles: 2 x 10 tons Axles with S-cam brakes and ABS, hydraulically actuated two-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drive-away wedge. 24V electric generator with HD piston pump, oil tank and 2 batteries enable remotely controlled functions via wireless remote control. Brakes: Two-line brake system according to EC with spring-loaded brake cylinders acting on the rear axles. With ABS Lighting according to StVZO (German Road Traffic Licensing Regulations). Integrated into a recessed underrun protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth transport. The hydraulic forced steering is equipped with a wireless remote control as standard, so the driver can "steer" from the cab in tight hairpin turns and during turning maneuvers. Options included in the price: a. Yellow rotating beacon at the rear, pluggable b. with 4 pull-out marker panels (red/white) with a retracted width of 2,550 mm and an extended width of 2,750 mm or 3,000 mm. c. with electro-hydraulically operated ramps Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further information = Fodpfxjz Engkj Akyepn Unladen weight: 9,000 kg Payload: 27,000 kg GVW: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2005, operating hours: 6,784 h, LIEBHERR L 506 Wheel Loader Year of manufacture: 2005 * Quick coupler * 42 kW * Max. speed: 20 km/h * Total weight: 6,300 kg * German machine Fpsdpfx Akoz El Dmjyjn

Condition: used, Year of construction: 1998, operating hours: 6,120 h, Equipment: all wheel drive,

Condition: used, functionality: fully functional, machine/vehicle number: JU3413, Year of construction: 2002, operating hours: 12,760 h, load capacity: 7,000 kg, lifting height: 3,920 mm, free lift: 365 mm, load center: 700 mm, fuel type: diesel, construction height: 2,830 mm, motor manufacturer: Perkins, DGUV certified until: 11/2026, fork carriage width: 260 mm, fork length: 1,380 mm, front tire size: SE300-15, rear tire size: SE300-15, empty load weight: 9,900 kg, total height: 2,830 mm, total length: 5,100 mm, total width: 2,350 mm, color: red, Equipment: CE marking, lighting, sideshift, Forklift Jumbo J/SH/14/50; No. JU3413, year of manufacture 2002; tires SE 3.00-15; platform width 1,400 mm; platform height 1,150 mm; overall height – structural height: 2,850 mm; width 2,350 mm, length 5,100 mm, mast height: 2,830 mm, lifting height 3,920 mm, free lift 365 mm, forks: 260 x 50 x 1400 mm; load capacity 7,000 kg / load center 700 mm, engine: Perkins diesel, approx. 12,760 operating hours – may change slightly as the vehicle is still in use; fork positioner, full cabin. Sale without guarantee and without warranty; Vehicle sale ex works – must be picked up by the buyer; Fpedpfjz D Aacsx Akyjn Inspection and test drive are possible by appointment.

Condition: used, Year of construction: 2016, operating hours: 3,318 h, Equipment: all wheel drive, * Enclosed cabin * Quick-change system * Bucket * Fork Fpjdpfxjz E Uhus Akyon * Rotating beacon ----Vehicle number: 12486----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transportation, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM

Condition: new, maximum load weight: 35,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, total length: 13,200 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLH S HS 3 / 3H – 18 / 30 Low-bed trailer / 3-axle / hydraulically steered Immediately available, also available with a grating floor. Manufacturer: Kässbohrer * Type: K.SLH S HS 3 / 3H – 18 / 30 * 3-axle low-bed trailer * BPW axles * Air suspension * Drum brakes * 1st, 2nd, and 3rd axles hydraulically steered * Axle liftable * Manual lift axle control * WABCO EBS 2S/2M with ABS and RSS * Tires: 245/70 R17.5 * M+S / 3PMSF tires * Tire pressure monitoring system * WABCO SmartBoard * Electric motor pump for steering * Semi-automatic tracking of the hydraulically steered axles Dimensions / Weights: Overall length: 13,250 mm * Overall width: 2,550 mm * Fifth wheel height: 1,250 mm * Gooseneck length: 3,900 mm * Platform length: 9,300 mm * Platform height: 875 mm * Wheelbase: 8,800 mm * Axle distance: 1,360 mm * Tare weight: approx. 12,760 kg Fodpez Ec Trefx Akyspn * Technical axle load: 30,000 kg * Fifth wheel load: 18,000 kg * Technical total weight at 80 km/h: 48,000 kg * Technical total weight at 40 km/h: 51,000 kg Wiese Transporttechnick - Dealer Chassis / Loading platform: High-strength S700 MC steel * 45 mm hardwood floor * Steel floor with drop structure over the wheels * Lateral widening * Widening up to 300 mm * 2" kingpin * Mechanical rear supports, load capacity 45 t * Partially metallized chassis * Rear end tapered by 500 mm / 10° Wiese Transporttechnick - Dealer Ramps: Hydraulic, folding ramps * Ramp load capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulically adjustable * Hardwood surface * Hydraulic gooseneck ramps * Ramp securing via chain tensioners Wiese Transporttechnick - Dealer Load securing / Equipment: Tie-down points: 10 × 10 t / 12 × 8 t / 22 × 5 t * 16 lashing pockets 80 × 80 mm * 4 container locking pockets for 1 × 20 ft * Tool box on the gooseneck, approx. 2,540 × 600 × 460 mm * Central lubrication system * LED rotating beacon * 2 work lights at the rear * Extendable warning boards with LED position lights * Storage box for widening planks * Chassis color: RAL 3020 Traffic Red Other: LED lighting * Aspöck EUROPOINT 3 LED * Spare wheel holder * 12 rims/tires * Widening panels * Extensive heavy-duty / construction machinery equipment Errors, changes and prior sale are subject to change.

Condition: used, power: 157 kW (213.46 HP), machine/vehicle number: CATIT62HEM5G00603, In working order. Fpedpfevwbd Tjx Akyjn

Condition: used, Year of construction: 2016, operating hours: 3,454 h, Equipment: all wheel drive, * enclosed cab * quick-change coupling * bucket * forks * rotating beacon ----Vehicle number: 12487----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export handling, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transportation. Fpedsz E Uiljpfx Akysn ?YOUR VTS TEAM

Condition: new, Year of construction: 2026, ‼️ROAD PERMIT* Josan – the VALUE-FOR-MONEY LOADER Robust, reliable and affordable – without unnecessary frills. Simple, easy-to-maintain technology without computers or complicated electronics. Our wheel loaders are powder-coated instead of just painted – a clear advantage against rust and de-icing salt. Whether in the forest, agriculture, equestrian farm, construction site or commercial use: the all-purpose loader is versatile and available with around 20 different attachments! ‼️ Feel free to watch our videos on our website S22 Value-for-Money Loader means: Standard equipment Fedpfx Aszf H Sbokyjpn ⚙️ OUR COMPONENTS ✅ FREE DELIVERY throughout Germany to your yard! ✅ Road permit* from TÜV SÜD – available only from us! ✅ TÜV SÜD Certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines (cab FOPS and ROPS certified) ✅ SOFT HYDRAULICS! From the same supplier that sells to high-priced wheel loader manufacturers. This allows for sensitive and precise raising and lowering of the pallet forks. Feel free to test it on our yard. ✅ POWDER-COATED! Steel is sandblasted, then plastic powder is applied and baked in the oven. Our frame, tanks, boom, etc. are processed in this way. This means extreme rust protection is INCLUDED! ✅ NEW! Larger luxury cab with reinforced steel, so we now meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SPRUNG COMFORT SEAT adjustable to your weight ✅ LIFTING CAPACITY approx. 1200 kg! With an unladen weight of approx. 2300 kg incl. bucket ✅ Hydraulic Euro attachment (standard EU dimensions) ✅ Up to 7 years warranty* ✅ Service throughout Germany by professionals in our own workshop ✅ Spare parts warehouse in Gemmrigheim. This means we can send parts within 24 hours ✅ Own factory in China ✅ High quality through continuous controls during the production process ✅ Thanks to our know-how and good mechanics, we can also provide short-term and uncomplicated assistance after the warranty period (throughout Germany and Europe) Technical data: ➡️ Weight only approx. 2300 kg (with bucket) ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): 4500 x 1300 x 2550 mm ➡️ Tipping height 2.83m ➡️ All-wheel drive ➡️ Soft hydraulics ➡️ Euro 5 engine ➡️ Articulated steering with oscillating axle ➡️ Comfort cab ➡️ Bucket 0.6 m³ ➡️ Hydraulic oil cooler ➡️ Cab and windshield can be heated with a fan ➡️ Radio with MP3 ➡️ Adjustable steering column ➡️ Additional control levers ➡️ Automatic selection of low and high gear ➡️ 2-stage torque converter transmission, electrically controlled ➡️ UVV NEW 1 year Optional: ➡️ Road permit ➡️ Reversing camera ➡️ Air-sprung comfort seat and retractable safety belt ➡️ Electric joystick for moving forward and backward with your thumb on the joystick ➡️ Tires as shown in picture 31/15.5/15 with AS profile (not standard 12.5/16) ➡️ 3rd & 4th control circuits with separate small joysticks ➡️ Floating function ➡️ Stainless steel exhaust ➡️ Combined pallet fork with attachment and tines ➡️ Euro attachment with hydraulic locking pins Net price €10,499.00 +19% VAT €1,994.81 Gross price €12,493.81 Josan – the future of construction Innovative, robust & affordable. *Please inquire about our warranty conditions. Pictures/text and equipment may vary. Subject to errors.

Condition: excellent (used), Year of construction: 2013, Well-maintained HMF 2420-K3 loading crane from 2013, featuring remote control and 6 hydraulic functions. Suitable for mounting on a truck and ideal for construction, transport, recycling, and industrial applications. This powerful HMF loading crane offers excellent lifting performance and is prepared for use with a rotator and grapple. A reliable and versatile crane, ready for immediate professional use. Specifications: HMF 2420-K3 Year of manufacture: 2013 6 functions (can be used with a rotator and grapple) Remote control Load capacity: 5070 kg at 4.4 m reach 3470 kg at 6.3 m reach 2600 kg at 8.2 m reach Fedpoz Hpausfx Akyopn 2070 kg at 10.2 m reach About Cevoman ✔ More than 45 years of experience with trucks and commercial vehicles ✔ Technically inspected by our own workshop ✔ Specialist in MAN trucks, loading cranes, and container systems ✔ COP certified ✔ Experience in worldwide export ✔ Personal service and professional advice Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, functionality: fully functional, power: 42.5 kW (57.78 HP), fuel type: diesel, operation weight: 600 kg, axle configuration: 2 axles, Year of construction: 1997, operating hours: 11,900 h, Equipment: cabin, pallet forks, quick-change device, standard shovel, Zettelmeyer ZL602C wheel loader Year of manufacture: 1997 11,900 operating hours 42.5 kW Deutz engine, 4 cylinders Approx. 6,000 kg Fpodpsz Hc E Rsfx Akyen Fork + bucket + quick coupler

Condition: used, Year of construction: 2025, operating hours: 20 h, Attachment 1 (manufacturer, cutting width, etc.): 3000mm bucket Automatic lubrication system -> Auto-lubrication system: Yes Operating weight: 29000 Emissions class: Emissions Class 5 EPA certification: Yes Maximum speed: 40 Lift arm kinematics: Z-kinematics Air conditioning: Yes Engine: Liebherr D 936 A7 Tire brand: Bridgestone Reversing warning device: Acoustic reversing warning device with camera Rotating beacon: Yes Quick coupler: none Fpsdpfx Aoz H Htfskyen Reversing fan: Yes Weighing system type: Liebherr Loadtronic Additional headlights: front + rear Condition of rear tires: like new Condition of front tires: like new Visual condition: like new Technical condition: like new -1 ---- Tires: Bridgestone VJT L3 26.5R25EM Lift arm (Z-kinematics) 3050mm Integrated tire pressure monitoring system Incl. bucket Location: Passau

Condition: good (used), axle configuration: 3 axles, first registration: 07/2018, suspension: air, color: blue, Year of construction: 2018, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Air suspension = Further Information = Axle Configuration Suspension: Air suspension Rear axle 1: Steerable Rear axle 2: Steerable Rear axle 3: Steerable Weights Unladen weight: 14,300 kg Payload: 32,700 kg GVW: 47,000 kg Maintenance, History, and Condition APK (Technical Main Inspection): Valid until 03/2027 Technical condition: good Visual condition: good Vehicle number: Low-loader: 05 Goldhofer MPA 3 / 3-axle PBW, steerable / With remote control / Extendable .: WG0MPA037J0039094 TÜV: 03/2027 - Inspection: 09/2026 PBW 3 x steerable axles Hydraulic ramps Remote control Unladen weight: 14,300 Total weight: 47,000 Length: 8.90 m, with extension 12.00 m, total extended length 15.40 m Width: 2.54 m No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. = Company Information = Fodpfx Aksz Hq Rzeyspn No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, Year of construction: 2019, operating hours: 2,471 h, Equipment: all wheel drive, Internal vehicle number: VTC30073 More information available at: Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: VTC * Purchase price: 37,500.00 € * Down payment: 10% * Term: 60 months * Monthly installment: 579.93 € Residual value: 7,380.00 € Fodpfsz Hr Riex Akyopn If this offer interests you or you would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 7,828 h, load capacity: 18,000 kg, lifting height: 3,500 mm, load center: 900 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: CUMMINS, gearing type: hydrostat, fork carriage width: 1,800 mm, fork length: 1,800 mm, fork width: 300 mm, fork thickness: 100 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 16.00 - 25, rear tire type: pneumatic tires (air-filled), rear tire size: 16.00 - 25, overall weight: 46,800 kg, empty load weight: 28,800 kg, total height: 3,950 mm, total length: 6,600 mm, total width: 2,900 mm, color: orange, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, cabin, fork extension, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, 🚜 HUBTEX S180D | 18 TON | DIESEL | DUPLEX 3500 MM | FORK POSITIONER | FULLY HEATED CAB 🔧 FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY | ✅ READY TO WORK Are you looking for a heavy-duty sideloader that is ready to work from day one? We offer a professionally prepared HUBTEX S180D with an impressive 18,000 kg lifting capacity. The machine has undergone a comprehensive technical inspection, full service, and operational testing, and is ready for immediate use in demanding industrial applications. ⭐ KEY ADVANTAGES 🔹 Heavy-duty 18,000 kg capacity 🔹 Powerful CUMMINS diesel engine Fedpfjz Idctsx Akyepn 🔹 Duplex mast – 3,500 mm lift height 🔹 Hydraulic fork positioner 🔹 Fully heated operator cabin 🔹 Camera system 🔹 Pneumatic tires – approx. 90% condition 🔹 Fully serviced and tested 🔹 Warranty included 🔹 Ready for immediate operation 🔹 Live video presentation available 🔹 Worldwide transport available 📋 TECHNICAL SPECIFICATIONS 🏭 Manufacturer: HUBTEX 🚜 Model: S180D 📅 Year: 2018 🏋️ Capacity: 18,000 kg ⚖️ Machine weight: 28,800 kg ⏱️ Operating hours: 7,828 h ⛽ Engine: CUMMINS Diesel 🏗️ Mast: Duplex ⬆️ Lift height: 3,500 mm ↔️ Fork positioner: 1,800 mm 🍴 Fork length: 1,800 mm 📐 Fork dimensions: 1800 x 300 x 100 mm 🔥 Cabin: Fully heated cabin 📏 DIMENSIONS Overall height: 3,950 mm Collapsed mast height: 3,700 mm Overall length: 6,600 mm Overall width: 2,900 mm 🛞 TIRES Front: 16.00-25 Pneumatic Rear: 16.00-25 Pneumatic Condition: approx. 90% 🏭 IDEAL FOR ✅ Steel mills and steel service centers ✅ Steel coils, beams, bars, and structural steel ✅ Timber and lumber industry ✅ Concrete and precast production ✅ Pipes and long profiles ✅ Heavy engineering and manufacturing ✅ Ports, terminals, and shipyards ✅ Heavy industrial logistics 🌍 WHY FT LOGISTICS? FT LOGISTICS specializes in sideloaders, multidirectional forklifts, and heavy-capacity material handling equipment. Every machine undergoes a complete technical inspection, servicing, and operational testing before delivery. 🚜 100+ machines available in stock 🔧 Full pre-delivery service 🛡️ Warranty 💶 Leasing and financing available 🚛 European and worldwide transport 📄 Export and customs documentation 🛠️ Professional after-sales support 📹 Live video presentation available We deliver machines throughout Europe, South America, Africa, Asia, and the Middle East. FT LOGISTICS We Deliver Machines Ready To Work.