Used Leistritz Extruder for sale (378)

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Dcedpfx Acexq Exqe Hji

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Dodsv Uz Awepfx Ac Hoci

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH - Model: ZE 30 Dcsdpfjq Tr Tbsx Ac Hei - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones Djdpfxsuhpiys Ac Hoci - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Dsdpfevw Aqhjx Ac Hsci

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h Dcsden Utt Hopfx Ac Hei * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC Dodpfx Aexw Tumec Heci max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Price on request.

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Dcjdpfex Hifvex Ac Hsi

Condition: like new (used), For older butyl extruders from Lenhardt Maschinenbau. Original belts. Belt dimensions: 5600 x 40 mm Dcodpfx Acoy D Hvmj Hji Application: Manual butyl extruder / Lenhardt Width: 40 mm Thickness: approx. 2 mm Length: 5600 mm Weight: 567 g Condition: Like new

Condition: good (used), Extruder for the production of plastic pipes The machine can be inspected by appointment! Dcjdpfx Acexcwxyo Hei Videos demonstrating its operation can be viewed on the manufacturer's website!

Condition: used, 3DGENCE Type: Industry F420 Technical specifications: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: Dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic exchange system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (See pictures) Dsdozix Ayjpfx Ac Hjci Weight: 350 kg (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. Dodpfezixucex Ac Hoci The system is available at short notice!

Condition: used, Dr. Wiesner Type: INTEGRA DDV -1...1 bar Item Description: Dr. Wiesner Integra leak testing system The classic – for all common testing methods The leak testing system for industrial leak and flow tests with a fully graphic color display up to three independent test circuits can be operated 255 test programs can be stored automatic process optimization autoTune (option) Communication via flexibly interchangeable bus coupling modules freely programmable fixture control freely programmable special test sequences The device is suitable for tests using the relative and differential pressure methods with overpressure. Special versions: none Technical data: Electrical supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) Pneumatic: clean and dry compressed air max. 7 bar (to connection P) Pressure range: 0 ... 1000 mbar, electronically controlled Measuring ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Electrical interfaces: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) Pneumatic: Connection for test object (Test) Connection for reference circuit (Ref.) Housing Degree of protection: IP40 Dimensions: 450x185x380mm (WxHxD) Weight approx. 15.5kg Condition: used Dcedpoziiv Djfx Ac Hji (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Dcedeywgaxjpfx Ac Hsi Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade fixtures, jigs, tools, and end-use parts. Designed for production environments, it prints parts that are stronger than machined aluminum, at a fraction of the cost. It combines superior surface quality, build volume, and reliability. Accelerate production with Turbo Print and verify dimensional accuracy with the Dcsdpfx Acszh Dqmj Hei adaptive manufacturing technology Blacksmith, which is only available on the X7. Technical specifications: Printer features Process: Fused Filament Fabrication, Continuous Fiber Reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm accuracy Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100–240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available fibers: Carbon fiber, Carbon fiber FR, Fiberglass, Aramid fiber (Kevlar®), HSHT Fiberglass Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Infill: closed-cell infill: several geometries available Software Eiger Cloud: Slicing, part and build job management (additional options available at extra cost) Security: 2-factor authentication, org-admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 Sale from current location Condition: used Scope of supply: (See pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 partially used rolls of Onyx filament (Subject to change and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 1988, condition: used, functionality: fully functional, Year: 1988 Material: LDPE/HDPE Winder width: 1100 mm, double winder Die diameter: 150, 100, 80, 50 Screw diameter: 60 Additional equipment: corona treatment + gravimetric system Maximum machine capacity: 90 kg The machine is in very good condition and can be seen in operation! Dedpfjzi Urwjx Ac Hsci

Year of construction: 2004, condition: excellent (used), KUAG CUT 110 PIPE SAW for PP, PE or PVC PIPES With central pipe fixation Cutting speed 20 m/min. Cutting length min. 20 cm Cutting and chamfering Cutting with a cutting roller/pizza knife or a chisel and grip steel Year of construction: 2004 Condition: very good Hablamos espanol Nous parlons français We speak English Hablamos español Nous parlons français We speak English Dcedpfx Acjffp S Ho Hei

Year of construction: 2007, condition: ready for operation (used), KAESER BB 88 C TURNING PISTON BLOWER, PVC POWDER FEEDER Unit: BB 88 C. Year of construction: 2007 Dedjqafbzepfx Ac Heci Pumping speed: 5.07 m³ / min. Final pressure (abs): 1.01 bar Maximum pressure difference: 500 / mbar Rated motor power: 7.5 KW Block speed: 4,270 rpm Condition: very good Hablamos español Nous parlons français We speak English

Year of construction: 1999, condition: excellent (used), SICA-TRK-SY.U 25-160 PIPE SAW for LD-PE and HD-PE PIPES CHIPLESS CUTTING With central clamps with for all diameters Minimum diameter 25 mm Max diameter 160 mm Year of construction 1999 Status: Very good, in working order Djdpfx Asm E Nqyoc Heci Machine locations: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property.

Condition: excellent (used), DREHER MILL S26 / 41 VS with cyclone and fan Dsdjgphqcepfx Ac Hjci Power: 11 KW Rotor diameter: 260 mm Rotor width: 410 mm 4 rotor knives, 2 rows of stator knives Inlet cross section approx. 260 x 410 mm Brqvu3zxfl Cutting mill with integrated noise protection. For plastic processing pipes, profiles, injection molding

Year of construction: 1991, condition: excellent (used), PP-PIPE BELLINGMACHINE LÜERS 2 SOCKETS PER CYCLE With ring insert device Type: MU125-2-6-91 Built in 1991 Application: PP HT pipes Two sockets per cycle Tool: 1 set for 2x125 mm HT pipe The Bellingmachine was overhauled in 2014 and modified Condition: very good Djdpfx Aceffp Uis Heci The machine is my property. Hablamos español Nous parlons français We speak English

Year of construction: 1999, condition: excellent (used), INJECTION MOLDING MACHINE KRAUSS-MAFFAI 150-700 C1 Year of manufacture: 1999 Screw diameter: 55 mm In excellent condition, still in operation. Dcedpfx Acjh S Dnce Hei

Year of construction: 2000, condition: excellent (used), HAUL-OFF GRAEWE R 125/4 Year of construction 2000 With remote control Drivet chains with synchronous drive Drivet chains good Dodstxvutopfx Ac Hoci Condition ready for use, in very good working order Machine is my property

Year of construction: 2010, condition: like new (used), BATTENFELD PE PIPE HEAD RK 315, spiral die, screen changer with tool 315 PE Lightly used, in excellent condition. Condition: As new. The pipe head is my property. Sachal Extrusion Machines Dcsdpfohy Aq Iox Ac Hei Bahnhofstr. 6 D-26345 Bockhorn-Grabstede

Year of construction: 2004, condition: good (used), ProTec 2 caterpillar haul-off for profiles and tubes Year of construction 2004 Synchronous drive In good condition, ready to work Dcjdpfeic Aayex Ac Hoi