Used Lds Schwingprüfsystem 9.81 Kn Spa10K Ce Dtc Venzo 800 for sale (19,875)

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Isdpfx Ajzii Awjm Hstl Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance Itjdpfx Amoxz Dqms Hol • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1996, Technical specifications: Isdpfx Amsz Abpvs Hstl Working length: 8050 mm Frame spacing: 7550 mm Press force: 340 tons CNC control: DELEM 21e with Cybtouch 15 Controlled axes: Y1/Y2; X1/X2 Stroke: 300 mm Distance table – ram: 500 mm Overhang: 300 mm Table height: 800 mm Motor power: 30 kW CE marking In-floor machine Dimensions (length x width x height): approx. 8400 x 2200 x 3860 mm Weight: approx. 56 tons Accessories: various tools Condition: overall very good condition The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Code: 0443 Brand: CMC - ITALY Model: SC 800 - CE Standard Band saw with covered wheel for cutting wood, carpentry, furniture, fixtures, plastics, aluminum, and other materials - CE Standard Technical specifications: Flywheel diameter 800 mm Working table size 710 x 1110 mm Cutting height 450 mm Blade length 5620 mm Motor 5,5 Hp Overall dimensions mm 1450 x 850 x 2400 h Weight kg 580 Iodpszlqrfsfx Am Hjtl

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, empty load weight: 13,000 kg, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 1,100 mm Travel range, Z-axis: 500 mm Iedpozxckmofx Am Hetl C-axis rotation: 360° Tool magazine slots: 32 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Dry weight: 13,000 kg Transport packages: 3 pcs. EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9220212, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,000 rpm, workpiece weight (max.): 4,000 kg, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm Itjdpfx Amjzza U Ij Hjl B-axis rotation: 360° C-axis rotation: 360° Spindle speed range: 40 – 2,000 rpm Tool holder: ISO 50 Main spindle power: 15 kW Number of axes: 3 Table length: 3,500 mm Table width: 800 mm Maximum workpiece weight: 4,000 kg MACHINE DETAILS Control system: Conventional Model: Bed milling machine with traversing table Dimensions & Weight Dimensions (L x W x H): 5,300 x 3,000 x 2,700 mm Shipping weight: 11,000 kg Number of shipping packages: 1 EQUIPMENT Digital display: Sony 3-A

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, MiR 200 December 2018 – used but in perfect working condition Length: 890 mm Width: 580 mm Iedpfeun Sq Ujx Am Hjtl Height: 352 mm Weight (unladen): 62.5 kg Loading surface: 600 x 800 mm Robot payload: 200 kg (maximum 5% incline) Towing capacity: 500 kg (see separate MiRHook 200 datasheet) Endurance: 10 hours or 15 km Maximum forward speed: 1.1 m/s (4 km/h) / reverse: 0.3 m/s (1 km/h) Battery: Li-NMC, 24 V, 40 Ah; charging time: up to 3 hours (0-80%: 2 hours) WiFi: Dual-band wireless AC/G/N/B SICK S300 laser scanners (x2): 360° visual protection around the robot Intel RealSenseTM 3D Camera: Object detection in front, 50-500 mm from the floor Ultrasonic sensors (x4): Detection of transparent objects in front, e.g. glass doors Safety compliance and certifications: EN 1525, PLd cat. 3, ESD approved and CE certified Price €13,000.00 (+VAT)

Condition: used, Year of construction: 2016, operating hours: 10,733 h, Equipment: all wheel drive, Internal vehicle number: G400121 Available immediately at our yard in Kaufungen. More information: ? Luis Lucena ? Viktoria Sologubova Atlas 1404 K ZW 4x4 Road-Rail Excavator | Road/Rail | Attachments | 20 t For sale: a used Atlas 1404 K ZW road-rail excavator, manufactured in 2016. This machine is designed for operation on both roads and railway tracks and is offered with several attachments. The excavator features four-wheel drive, a central lubrication system, air conditioning, auxiliary heating and a reversing camera. A CE declaration of conformity is available. Technical specifications: * Manufacturer/Model: Atlas 1404 K ZW * Machine Type: Wheeled Road-Rail Excavator * Application: Road and Rail * Year/Model Year: 2016 * Operating Hours: 10,733 hrs * Engine: Deutz TCD 4.1 L4 * Engine Power: 95 kW * Rated Speed: 1,800 rpm * Permissible Total Weight: 20,000 kg * Permissible Front Axle Load: 10,000 kg * Permissible Rear Axle Load: 11,500 kg * Vehicle Identification Number: 241 Z 301938 * Drive System: 4x4 * CE Declaration of Conformity available * Measured Sound Power Level: 96.2 dB(A) * Guaranteed Sound Power Level: 98 dB(A) * Technical Inspection: New * Vehicle Number: G400121 * Condition: Used * German Vehicle Equipment: * Road-rail equipment for road and rail operation Itsdpfxsyzk Iho Am Hsl * Four-wheel drive * Central lubrication system * Air conditioning * Auxiliary heating * Reversing camera * Load hook Attachments: * Grading bucket * Grab, 800 mm * Grab, 280 mm * Load hook Inspection and functional testing are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Financing example: * Internal number: MK * Purchase price: €65,900.00 * Down payment: 10% * Term: 60 months * Monthly payment: €1,025.02 Residual value

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Itjdpfozvmpnox Am Hol Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: used, Year of construction: 2012, fuel type: electric, Weights Empty weight: 6.550 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.190 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Iedpfx Amowd Npis Hjtl Other information Delivery terms: EXW Max. horizontal reach: 990 m Transport dimensions (LxWxH): 5,5x1,2x1,99 Additional information Please contact Christian Theißen for more information Manufacturer: Manitou Model: 120 AETJC Year of build: 2012 Condition: Used Data: Max. working height: 11,90 m Max. platform height: 9,90 m Max. reach: 7,35 m Drive type: Battery Total dimensions LxWxH: 5,50 x 1,20 x 1,99 m Length of transport position: 4,08 m Height transport position: 2,38 m Platform dimensions LxW: 1,20 x 0,96 m Max. basket load: 200 kg Swivel range: +/- 175° Movable up to working height: 11,90 m Max. climbing capacity: 25% Wheel pressure max.: 27 kN Ground clearance: 0,10 m Own weight: 6.550 kg Special features: Rotatable work basket, basket arm/vertical rotation angle +/- 70°, white tires, advantage: high lateral reach, inner and outer overhang = 0 Units: 5557, 5568, 5576, 5597, 5603, 5604, 5606, 5608, 5611, 5612, 5613, 5614

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance Z-axis: 1,500 mm, chuck outer diameter: 1,800 mm, spindle speed (max.): 315 rpm, turning diameter: 2,000 mm, turning height: 2,450 mm, rotational speed (max.): 3,000 rpm, year of last overhaul: 2026, FOR SALE – 12 MONTHS GUARANTEE – CE MARKED A DORRIES-SCHARMANN VCE2000/180MC-FC CONTUMAT Vertical Turning, Centre for high accuracy heavy cut turning, high precision heavy PCD drilling and continuous rotary milling Delivered in 2002. Condition: Excellent - see INTRO page CNC specification – high level Siemens 840D Hydrostatic crossrail and ram guideways. Cutting and positioning feed rates up to 18m/min A 9-STATION MAGAZINE is for turning toolheads & machining heads. These heads are picked up by the ram during cycle The turning and milling heads are fed by a KELCH DOUBLE GRIPPER TOOL CHANGER, as seen on most machining centres The tool changer collects the turning tools (CAPTO C8) and live spindle tools (SK50) from a WERO magazine The magazine as supplied with this machine originally has the capacity to hold 60 Capto C8 tools and 76 SK50 tools The KELCH toolchanger can change the tools in both vertical and horizontal working positions. This means, for example, that various SK50 tools can be fed into a right angle milling head while it remains on the ram MACHINE SALE POSSIBILITIES Itedpfjy Uw Emex Am Hel The machine specification will be finalized by the purchaser and VTT-WB New guarding will be supplied to match the final specification GUIDE PRICES A – machine without the pallet system but with the full tool changing and tool storage system. New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance Tool storage capacity can be reduced within this price £525,000 B – machine without the pallet system and toolchanging and storage system replaced with 30 pocket disc type magazine New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance £540,000 C – machine to original specification including full pallet system and full tool change system New guarding. CE marking 12 months full warranty, including 96% uptime guarantee on machine but excluding pallet and toolchange system £650,000

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s Itsdpfszvmx Njx Am Hsl PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t

Condition: good (used), Year of construction: 2011, fuel type: electric, Weights Itedpfxjzx R Duo Am Hjl Empty weight: 7.300 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.500 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 850 m Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: HA15IP Year of build: 2011 Condition: Used Data: Max. working height: 15,00 m Platform height: 13,00 m Max. reach: 8,50 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,20 x 0,75 m Swivel range: +/- 175° Gradeability: 25% Total dimensions LxWxH: 6,95 x 1,49 x 1,98 m Movable up to working height: 15,00 m Wheel pressure max.: 36 kN Ground clearance: 0,15 m Drive type: Batterie Empty weight: 7.300kg Special features: Rotating work basket, basket arm rotation angle +/- 70°, white tires, advantage: high lateral reach.

Condition: used, Year of construction: 2002, SECOND-HAND DOUBLE DISK SANDER LANDONIO MOD. LV 800 - CE RULES - Year 2002 Itsdpowrm R Hofx Am Hjl

Condition: used, Used Envites model K800/55-50/30 chamber type filter press. Filtration surface: 49,5 sqm Chambers & Plates: 50 chambers, thickness 30 mm, (49) polypropylene 800x800 mm recessed plates and (2) end plates Cake volume: approx. 673,5 litre Others: max. filtration pressure 16 bar, closed delivery, (5) eyes per plate, double acting hydraulic ram with hydraulic agregate, plate shifter, CE Marked, ES Declaration of Conformity, Comprehensive technical documentation included. Specifications: Material: Carbon steel/polypropylene Plate Size: 800 x 800 # of Plates: 49 Delivery: closed Itedpfx Amozun Dwe Hel Eyes: 5 Cake Capacity: 670 Plate Type: recessed Plate Thickness: 60 Surface Area: 49,5 Closure: hydraulic Operating Pressure: 16 Weight: 5500

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Itodezb Il Nepfx Am Hol Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: excellent (used), Year of construction: 2007, operating hours: 68,651 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, plate length: 680 mm, plate height: 740 mm, total length: 4,500 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 7,300 kg, Equipment: documentation/manual, ENGEL Victory 330-120 Tech Stock No.: 503558 Manufacturer: ENGEL Type: Victory 330-120 Tech Control: CC100 Year of manufacture: 2007 Operating hours: 68651 h Technical data, clamping unit Clamping force: 1200 kN Platen size h x v: 740 x 680 mm Minimum mold thickness: 300 mm Maximum mold thickness: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Centering of moving platen D: 125 mm Centering of fixed platen D: 125 mm Tool weight: 825 kg Technical data, injection unit Screw diameter: 35 mm Displacement: 154 ccm Injection pressure: 1600 bar Screw length: 20 l/d Screw stroke: 160 mm Screw speed: 400 rpm Free injection flow rate: 151 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions L x W x H: 4.5m x 2.1m x 2.1m Total weight: 7300 KG Equipment Screen text in German CEE socket 16A Itjdpez A D Dtefx Am Hol Hydraulic core pull 2x Machine including conveyor belt Machine including safety enclosure Machine without material hopper Leveling elements Interface for ejector plate locking Schuko socket 10A Technical data, handling Machine type: Linear Manufacturer: ENGEL Control: ER-HLI41VC

Condition: used, Year of construction: 2017, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, Equipment: chip conveyor, MACHINING CENTER DMG MORI DMC 650 V Year: 2017 Manufacturer: DMG MORI Model: DMC 650 V CNC Control: Celos with Siemens 840D Machine dimensions: 4725 x 5090 x H 2670 mm Weight: 5,900 kg AXIS TRAVELS X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm Rapid traverse: 42 m/min Feed rate: up to 42,000 mm/min SPINDLE speedMASTER Spindle speeds - Continuously programmable: up to 20,000 rpm - In setup mode: 800 rpm Motor power - Max. drive power (40% duty cycle): 35 kW - Rated power (100% duty cycle): 25 kW Torque - Max. spindle torque (40% duty cycle): 130 Nm - Rated torque (100% duty cycle): 86 Nm Tool holder: SK40 Tool clamping force: 11.2 kN TABLE Table size: 960 x 570 mm T-slot spacing: 100 mm Number of T-slots: 4 / 14H12 Reference slot: 1 / 14H7 Max. table load: 800 kg Loading height (floor to table top): 800 mm 4TH AXIS – NC ROTARY TABLE MORI SEIKI DDRT 200X Center height: 140 mm Table diameter: 200 mm Center hole diameter: 65H7 mm Clamping surface diameter: 50 mm Clamping slot: 14h6 mm Clamping torque: 600 Nm Max. torque: 280 Nm Rotational speed: 150 rpm Positioning time: 5 s Repeatability: 3 s Max. workpiece diameter: 250 mm Max. speed: 200 rpm Load capacities - Max. clamping weight (one-sided): 102 kg - Max. vertical load: 100 kg - Max. vertical load with tailstock: 250 kg - Max. horizontal load: 250 kg Weight of NC rotary table: 115 kg TOOL MEASUREMENT – TT160 Probing accuracy: < 15 µm Max. deviation of measuring element: 5 mm Axial triggering force: 8 N Radial triggering force: 1 N Max. probing speed: 5 m/min Protection class: IP67 (EN 60529) Itedpfoy Nkcnox Am Hjl Working temperature: 10–40°C CHIP CONVEYOR WITH COOLANT EXTENSION SYSTEM Coolant tank capacity: 230 l MACHINE COOLING UNIT Effective cooling capacity: 4.5 kW Cooling circuit pump: 40 l/min Refrigerant: R 134a Coolant: Water - Antifrogen® L 70/30 % Coolant filling volume: 38 l Coolant discharge temperature: +15° to +30°C Permitted ambient temperature: +10° to +45°C Unit weight (dry): 130 kg Additional Information Operating hours: approx. 2,200 20-position tool magazine Machine supplied with manuals and CE certificate of conformity All technical data provided are for reference only and subject to change without notice, and therefore are not legally binding.

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg Itjdpey Hmfyofx Am Hsl MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: used, functionality: fully functional, Year of construction: 2012, in the following configuration: - GEKA punch holder No. 8-31 and 8-40 with quick-change system - GEKA die holder No. 8 and No. 5 - Support table at the punching station with stops - Support table at the flat bar station with stops - Selector switch for setup and operating modes - 1 foot pedal - Incl. accessories (punches and dies) - Technical documentation - CE design Technical data: Punching unit: Punching force: 40 t Throat depth: 175 mm Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 pcs. Max. sheet thickness Ø: 20 x 15 mm Working height: 970 mm Flat bar shear: Cutting capacity: 300 x 6 / 200 x 13 mm Angle steel 45° (one flange): 50 x 50 x 6 mm Angle steel 90°: 80 x 80 x 8 mm Blade length: 356 mm Working height: 980 mm Round and angle steel shear: Angle steel 90°: 80 x 80 x 8 mm Round: 30 mm Square: 25 mm Working height: 1,110 mm General: Motor power: 3 kW Voltage: 400 V / 50 Hz Itsdpfsxu Ugxex Am Hsl Dimensions: Width: 800 mm Depth: 1,100 mm Height: 1,520 mm Weight approx.: 580 kg The specified performances refer to steel with R = 45 kg/mm²

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Iedpfx Amjzvgu Dj Hotl Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: good (used), Year of construction: 2014, fuel type: hybrid, Weights Empty weight: 6.512 kg Functional Mast: articulated arm Itjdox S H D Tspfx Am Hsl Lifting capacity: 225 kg Working height: 2.080 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1300 m Max swing of platform in degrees: 355 Transport dimensions (LxWxH): 6,5x2,29x2,15 Additional information Please contact Christian Theißen for more information Manufacturer: Nifty Lift Model: BS2191-HR21 Year of build: 2014 Condition: Used Data: Max. working height: 20,81 m Platform height: 18,81 m Max. reach: 13,02 m Drive type: Hybrid Total dimensions LxWxH: 6,50 x 2,29 x 2,15 m Length of transport position: 5,30 m Height transport position: 2,15 m Platform dimensions LxW: 1,80 x 0,86 m Max. basket load: 225 kg Swivel range: 355° Overhang: 0,46 m Movable up to working height: 20,80 m Max. gradeability: 40 % Wheel pressure (Support pressure): 39,28 kN Ground clearance: 0,16 m Empty weight: 6.512 kg Special features: Rotating work basket 100°, basket arm/vertical rotation angle 150°, all-wheel drive, differential lock, pendulum axle, white tires, integrated soot filter. Location: 41468 Neuss immediately available

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Iodezvmxpopfx Am Hjtl Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: good (used), Year of construction: 2007, operating hours: 2,799 h, Manitou 180ATJ articulated boom lift / work platform, 18m working height, 4x4x4, 2007, 2800 hours, diesel. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Iedpfx Ajzy R T Som Hotl Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 255100, punching force: 20 t, total height: 2,150 mm, total width: 2,900 mm, total length: 4,900 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, working range: 1,270 mm, type of input current: three-phase, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 75 kg, overall weight: 11,000 kg, input current: 40 A, input frequency: 50 Hz, table load: 75 kg, feed rate X-axis: 82,000 m/min, feed rate Y-axis: 82,000 m/min, feed rate Z-axis: 82,000 m/min, travel speed (max.): 82,000 mm/min, input voltage: 400 V, AMADA EUROPE 255 CNC Punching Machine CNC turret punching machine AMADA EUROPE 255, year 1999, equipped with a GE Fanuc Series 18i-P CNC control. The machine is installed and available for inspection and demonstration while powered on, by appointment. Technical specifications: Manufacturer: AMADA EUROPE Model: EUROPE 255 Year of manufacture: 1999 CNC control: GE Fanuc Series 18i-P Punching force: 200 kN (20 t) Working range X x Y: 1,270 x 1,270 mm Maximum sheet thickness: 3 mm Table load: 75 kg Turret: 27 stations Maximum positioning speed: 82 m/min Power supply: 400 V / 50 Hz / 3-phase Nominal current: 40 A Installed power: 29 kW Machine dimensions: approx. 4,900 x 2,900 x 2,150 mm Machine weight: approx. 11,000 kg CE marked The machine is currently installed and can be inspected while powered on. Available immediately. Iedpozw Ui Esfx Am Hetl Inspection by appointment. Location: Greece