Used Lautenschläger Meplamat 3000 for sale (4,945)

Condition: good (used), Offer 26038 Technical data approx.: - Plate length approx.: 3000 mm - Plate width approx.: 2500 mm - Plate height without base frame approx.: 350 mm Lhjdpfx Apeyc T Dtomsk - Plate height with base frame approx.: 870 mm - Top plate thickness approx.: 75 mm - 9 T-slots in table surface, length: 3000 mm - Center distance of T-slots in table surface each: 250 mm - Center distance of T-slots from outside edge: 125 mm - T-slot width approx.: mm - T-slot depth approx.: mm - Required space: L 3000 x W 2500 x H 870 mm - Weight approx.: 8000 kg

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.809, Offer 25079 Technical specifications: - Max. working width 3100 mm - Max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1° 30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-down clamps: 14 - Motorized backgauge - Electric foot switch - Front angle stop - Stroke rate 15 per minute - Drive 380 V / 22 kW - Table height 800 mm - Space required including backgauge, without front support arms - Approx. W 3400 x H 2250 x D 2150 mm Lhedpfx Aov Nkdmopmjk - Weight approx. 12000 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 190454, Offer 25290 Technical specifications: - Max. working width: 3040 mm Lsdpfx Apow Sthdomshk - Max. material thickness at 40 kg / mm² strength: 2 mm - Preselectable bending angle: 6 – 135° - Maximum opening / stroke of the upper beam: 250 mm - Height adjustment: - of the bending beam: 50 mm - of the lower beam: 50 mm - Upper beam drive: 400 V / 0.37 kW - Bending beam drive: 400 V / 0.75 kW - Manual backgauge - Segmented gooseneck bending rail - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx.: 3500 kg

Condition: good (used), Offer 22188 Technical specifications: - Height-adjustable roller conveyor with spring support and locking mechanism Lodpewcphcofx Apmehk - With clamping lever - Roller conveyor length approx. 3000 mm - Min. roller conveyor height approx. 640 mm - Max. roller conveyor height approx. 1190 mm - Outer roller width approx. 260 mm - Roller diameter approx. up to max. 100 mm - Max. possible number of rollers: 13 - 10 rollers are installed - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

Condition: used, Item No. 16191 T-slot plate Lhjdpfx Apjzibw Hjmsk Technical data: - Plate length approx. 3000 mm - Plate width approx. 2000 mm - Plate height approx. 310 mm - Thickness of the top plate approx. 70 mm - 8 T-slots in the table surface, length 3000 mm - Center distance of the T-slots in the table surface: 250 mm each - Center distance of the T-slots from the outer edge: 125 mm - T-slot width approx. 21 / 31 mm - T-slot depth approx. 30 mm - 4 adjustable support feet - Space required: L 3000 x W 2000 x H 810 mm - Weight approx. 4200 kg

Year of construction: 1987, condition: used, machine/vehicle number: 6489; Lg-Nr. 13105, Technical data: - Maximum load capacity: 3000 kg - Turntable diameter: 1600 x 1600 mm - Turntable extension tubes Lhsdpfx Aebp Ddzjpmok - Turntable, motor-driven, swiveling: 0 - 90 / 135° - Steplessly adjustable rotary motion: 0.01 - 4 rpm - Controllable clockwise and counterclockwise rotation - Welding current transfer: approx. 500 A - Power supply: 400 V - Table height in horizontal position without base: approx. 1200 mm - Table height in horizontal position with base: approx. 2200 mm - Space requirement: approx. W 1600 x H 1200 + 1000 x D 2400 mm - Weight: approx. 2700 kg

Condition: good (used), Year of construction: 1997, machine/vehicle number: 885258, Offer 25514 Technical Data: Ljdpex Ew Dqjfx Apmohk - Max. working length: 3060 mm - Frame opening: 2690 mm - Max. pressing force: 1300 kN - Max. distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 215 mm - Stroke speeds: - Downward idle speed: max. 200 mm/sec - Upward speed: 135 mm/sec - Pressing speed (downward): 1 to 11 mm/sec - Total drive power: 18 kW - Pneumatic connection: 6 bar - Required space: approx. W 3800 x H 2700 x D 2400 mm - Weight: approx. 11,500 kg Features: - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal - Crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Pneumatically assisted die table shifting

Condition: good (used), Year of construction: 1998, machine/vehicle number: 98095307, Offer 24271 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0.5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs. - mot. Rear fence with positioning control 10 - 1000 mm - Front angle fence - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min - Pneumatic connection 6 bar - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement incl. back gauge, - approx. W 4050 x H 1600 x D 2450 mm - Weight approx. 5500 kg - with: - E-foot switch - Cutting line lighting - Sheet support Lhedpfx Apet Tw Uismok - Rear guard with protective grille

Condition: good (used), machine/vehicle number: 14012, Offer 14012 Technical data: - Length approx. 3000 mm - Width approx. 1500 mm - Material thickness of the top plate approx. 55 mm - Total height of the ribbed plate approx. 185 mm - Subframe - Total height with subframe 730 mm - Weight approx. 3500 kg Lhedpfx Apsw Rnf Ijmsk

Condition: good (used), Year of construction: 2003, machine/vehicle number: A 10371, Offer 25448 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity (St 40): 0.5 – 6 mm - Cutting angle adjustable (motorized): 0.5 – 3° - Blade gap adjustment: manual - Number of hydraulic hold-downs: 18 pcs - Motorized backgauge with SP8 positioning control: 10 – 750 mm - Strokes per minute (depending on cutting angle and length): 9 – 17 strokes/min - Hydraulic drive: 400 V / 7.5 kW Ljdpfx Asx I I Uxspmshk - Table height: 770 mm - Space requirement incl. backgauge, w/o front support arms: approx. W 3750 x H 1600 x D 2450 mm - Weight: approx. 4500 kg Includes: - Electric foot switch - Cutting line illumination - Angle gauge - 2 support arms - Rear area protection with side guard and light curtain

Condition: good (used), machine/vehicle number: 26041, Offer 26041 Technical data (approx.): - Plate length approx.: 3000 mm Lhsdoyvrx Rspfx Apmok - Plate width approx.: 2500 mm - Plate height without base frame approx.: 180 mm - Plate height with base frame approx.: 810 mm - Top plate thickness approx.: 115 mm - 11 T-slots in the table surface, length: 1500 mm - T-slot pitch in the table surface: 250 mm each - T-slot width approx.: 40 / 22 mm - T-slot depth approx.: 16 / 24 mm - Required space: L 3500 x W 2500 x H 1100 mm - Weight approx.: 4500 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2708, Offer 23478 Technical data: - max. working width 3030 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustment - Cutting gap adjustment - Number of hydraulic hold-down devices 17 pcs - Motorized backgauge with positioning control ELGO 10 - 950 mm - Back gauge with safety guard - front angle fence + 2 support arms - max. stroke rate at max. cutting length 13 per/min - Hydraulic drive 400 V / 11 kW Lhedjq R T U Dspfx Apmek - Table height mm - Space requirement incl. back gauge, without front support arms, without safety guard - approx. W 3800 x H 1840 x D 2350 mm - Weight approx. 7500 kg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Ledpfxszrd Tvo Apmjhk

Condition: like new (used), Year of construction: 2021, BAUST PW 3000 Stationary Pallet Changer in a Two-Way System The pallet changer is a stationary, automatically operating system for transferring load units from a source pallet, e.g., a wooden pallet, to a destination pallet, e.g., an aluminum pallet. Transferring by means of a sliding process Gentle handling of particularly sensitive goods Space-saving two-way palletizing system Operation from both sides, for example, in lock systems Ljdpjzrdhtsfx Apmshk Sliding plates and flexible side walls Operation via pallet truck Pallet size: up to 1,200 x 1,800 mm Load height: 80 to 1,500 mm Maximum load capacity: 500 kg Manufacturer: Baust Year of manufacture: 2021 Space required: 450 x 350 x 270 cm

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Lhodpfx Apsxnlavjmsk

Condition: not inspected (used), Year of construction: 2020, functionality: unexamined, machine/vehicle number: 71193, ● Condition: Not tested ● Location: 47906 Kempen ● Availability: By arrangement ● Payment terms: Advance payment by bank transfer ● Internal no.: ZM3 Technical data: Measuring volume: 3000 mm Accuracy: 0.045 mm Lhsdpfxoy Sawtj Apmsk Scope of delivery: ● With laptop and software as shown in the pictures (completeness not guaranteed) ● With transport case Dimensions & weights: ● Setup dimensions (L x W x H approx.): 1000 x 500 x 1000 mm ● Weight approx.: 30 kg Additional information: ► Transport to the destination can be offered upon request ► The quoted price is net plus VAT ► The goods are sold under exclusion of any warranty ► Technical data without guarantee ► Subject to prior sale ❗The sale of the goods is strictly to commercial customers only❗

Condition: new, Fully automatic ergonomic car platform CEIT FTS CEIT 3000 AFR | 2019 Variant F N02 Maximum movement speed 0.75 m/s, maximum trolley weight 3000 kg, track weight 375 kg, maximum traction force 1000 N, operating voltage 36 V=, power 1200 W (unused) Lodpfx Aovzxmgjpmshk automatic ergonomic car platform CEIT FTS CEIT 3000 AFR Year: 2019 QUANTITY 5 PIECES

Condition: good (used), Code: 0409 Brand: THEOREMA Model: BR 3000 SPECIAL - CE Standard CNC boring and pantograph working centre with 3 controlled axis for furniture, kitchens, bathroom furniture, panels, doors and miscellaneous - CE standard Technical data: Minimum overall dimensions Useful length X axis mm 3000 Useful length Y axis mm 1300 X axis speed mt/min 24 Y axis speed mt/min 24 Z axis stroke mm 65 Max panel thickness mm 65 Boring unit with n° 18 spindles - Right-left drill chuck diameter mm 10 - Rpm 4000 Pantograph with pneumatic tool release - Motor Hp 7,5 - Rpm 0/18000 - Inverter for spindle Kw 5,5 Nesting worktable Suction cups mm 150 x 150 Rapid panel positioning Optimisation of the drilling path Specularity of drilling and milling cycles Interpolation on three X-Y-Z axis Lsdpfx Apouwdnxomohk Vacuum pump cubic metres 100 Compressed air atm 6 Overall dimensions: mm 4400 x 1700 x 2400 h Weight kg 1200 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Lsdpfozncnqjx Apmehk TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 420 mm Travel range Z-axis: 480 mm Table size: approx. 3,000 × 500 mm Spindle connection: SK40 Maximum speed: 6,000 rpm Tool changer: 22-position MACHINE DETAILS CNC control: Heidenhain TNC 407 EQUIPMENT Additional angular/universal milling head Coolant system Documentation/manual 4/5-axis machining: possible Machining of complex workpieces: possible

Condition: new, Year of construction: 2026, overall weight: 1,350 kg, Top quality 3D perforated table 3000 x 1500 x 200 mm, 100 mm grid, plate thickness 22 mm, hole diameter 28 mm, Ljdpfx Apox Nihismehk Surface-machined, very solid, weight approx. 950 kg With table legs, adjustable in 6 positions Price is without accessories, surcharge €500 Packed in wooden crate, shipping on request

Condition: used, mileage: 1,001 km, first registration: 01/2009, color: orange, driver cabin: other, gearing type: other, Year of construction: 2009, Equipment: central locking, crane, Vehicle location: Bovenden, emergency stop, gripper control, foldable, 4-point hydraulic support, wireless remote control, 5x hydraulic extensions, jib, 3x hydraulic extensions on the jib. Ljdpjzf N Avefx Apmohk Superstructure: HMF 3000-K5 + jib FJ5-K3 with 4-point support & wireless remote control. Load chart: 4.6m-5650kg, 6.4m-3800kg, 8.4m-2750kg, 10.4m-2120kg, 12.5m-1700kg, 14.6m-1450kg + jib: 17.6m-740kg, 19.2m-650kg, 20.9m-590kg, 22.5m-500kg! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Year of construction: 2026, condition: new, functionality: fully functional, For sale: skip with steel lid, 3000 x 2000 x 1250 mm Product description: For sale is a skip with a steel lid, 3000 x 2000 x 1250 mm, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: - Base: 3 mm - Sides: 3 mm - Steel lid: 2 mm - Frame, C-profile: 80 x 50 x 4 - Fasteners for transport, made of 6 mm sheet metal - Drain valve in the base of the container - Transport with a forklift is possible along and across the container - Transport with a crane is possible - Warning stickers: white and red - The entire range of RAL colors is available - Interior and exterior: zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: - Robust construction for heavy materials - Easy handling thanks to sturdy hinges Ledpfjzq E R Tsx Apmshk - Stackable - Weather-resistant due to corrosion-resistant coating

Condition: used, Manufacturer: Mitutoyo Lhodpfoy Nlu Eox Apmjk Model: PJ 3000

Condition: good (used), Movement range: 600mm Platform size: 800x800mm Pedestal height: 870 mm Lhedpfx Aepy Dtxspmok

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 300 kg, construction height: 1,950 mm, Technical condition: very good Lhjdpfx Aoymt Hcopmok