Used Ip Ip 10 6T for sale (34,946)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, Bljdpfx Aozd Eynemrsn 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: good (used), Year of construction: 2010, REGLOPLAS P160M/10/SM75/S K/RT50 (2010) Max temperature: 160 C Bledpez D T A Ujfx Amrjn

Condition: used, machine/vehicle number: 516329G00447, Year of construction: 2016, operating hours: 11,358 h, load capacity: 5,000 kg, lifting height: 5,400 mm, mast type: triplex, fork length: 2,300 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 5,400 mm Fork length: 2,300 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery voltage: 80 V Battery capacity: 840 Ah Battery year of manufacture: 2017 Battery voltage at rest: 85.3 V Service valid until: 07/2027 UVV (Industrial Safety Regulation) valid until: 07/2027 Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,350 x 3,000 mm Own weight: 8,300 kg Operating hours according to display: 11,358 h Bsdjz Dfrbjpfx Amroln EQUIPMENT Full free lift 3rd and 4th hydraulic valve Side shifter Hydraulic fork positioner Full cabin with heater and windshield wiper LED work light front LED work light rear Road traffic lighting with turn signals Safety light rear Comfort seat with lumbar support and seat heating Hawker Enersys battery charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift truck on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 558

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG73/D K/RT50 Temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial use in plastics processing, particularly for temperature control of injection molds and other process tools. Serial No.: 102010730001 Year of manufacture: 2010 Temperature max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 60 l/min Tank volume: 2.8 liters (internal filling volume) Bjdpfoz Ek Spjx Amrjln Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooler) Motor power of the pump: 1 kW Continuous sound pressure level

Condition: good (used), Year of construction: 2010, CNC lathe, Haas brand, GT-10 model, year 2010. Bedpfx Amez D D I Uereln

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00566, load capacity: 10 kg, arm reach: 2,530 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB  4400L/10 manufactured in 2017.05. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 4400L/10 Model Number: IRB Year of Manufacture Robot: 2017.05 Warranty term (months): 12   Payload (kg): 10 Reach (mm): 2530 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1040   Controller: IRC5 Bsdpfx Asz D I Ulomreln Year of Manufacture Cabinet: 2017.05 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: like new (used), Accessories: Control system Manufacturer: Allen Bradley Type: EtherNet/IP CAT 1756-ENBT Bedpsx Rbtmefx Amrsln

Condition: new, – 2 manually operated clamps – Ø 5 mm cutter – DC motor Bedpfxoz E Dczs Amroln – No-load speed 23,000 rpm – Material stop – Documentation – 230V

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (total capacity for 30 trolleys) Blodpfx Amoy Ua Rxeron Technical specifications of the set (3 chambers): Each chamber has a capacity of 10 trolleys Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators. Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three powerful steam-smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys), which ensures optimal air and smoke circulation, and thus a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam installation operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, shortening the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle Bledpszawizefx Amrjn ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: used, mileage: 164,226 km, power: 92 kW (125.09 HP), first registration: 10/2014, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2026, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, ? Ford Transit L2 ? Box van Blodpey Dzlvofx Amren ? First owner ? German vehicle ? Air conditioning ? 6-speed transmission ? 3 seats ? Multifunction steering wheel ? Electric windows ? Payload: 1200 kg ? Tires 75%? Spare tire ? 2 rear doors ? Interior dimensions: L: 3.50m..W: 2.05m..H: 2.10m ? Euro 5 ? MOT valid until 10/2026 Special equipment: Airbag, passenger side, Audio system: radio/CD player with multi-function display, Exterior mirrors with long support arm, Digital tachograph, Configuration with specific central locking, Seat package 7: driver's seat (4-way adjustable) - passenger double seat, fabric Additional equipment: 2nd battery, Storage compartment in the headliner of the cab, Airbag, driver side, Anti-slip regulation (ASR), Turn signal integrated into the exterior mirror, On-board computer, Headliner in the passenger compartment, Rev counter, Electronic brake-force distribution (EBD), Electronic differential lock (EDS), Driving assistance system: hill start assist, Generator 150 A, Heater with recirculation, Body/superstructure: standard platform, Steering column (steering wheel) adjustable in height/length, Headlight range control, Engine 2.2 Ltr. - 92 kW TDCi CAT, Production site: Otosan, Wheelbase 3504 mm, Spare wheel with regular tires, Low emissions according to exhaust standard Stage 5 / Euro 5, Steel rims 6.5x16, Front panel extension, aluminum platform, Bumper partially painted, Tinted glass

Condition: used, Year of construction: 1960, Technical details: Blsdpfou Nfudox Amron pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Year of construction: 2018, operating hours: 5,778 h, 2018 | Kobelco SK300LC-10 | Used Tracked Excavator | 5778 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 89600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Bedpfx Aoz Ei S Uomreln 👷‍♂️ Inspected by an independent expert 66 inspection points 62 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good general and operational condition. 3 buckets in good condition. Broken pressure detectors will be replaced for sale. Regular maintenance without notable replacement of essential parts. Apart from slight play in the boom and in the bucket coupler, the machine shows little signs of wear. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40812 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Bljdszui Uwjpfx Amren Refrigerant: R507 Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: not inspected (used), Year of construction: 2011, operating hours: 12,000 h, functionality: unexamined, machine/vehicle number: 1200 000043 7, TECHNICAL SPECIFICATIONS CNC control: Siemens Sinumerik 840D Number of axes: 5 axes Travels X-axis travel: 120 mm Y-axis travel: 120 mm Z-axis travel: 200 mm A-axis: -10° to +120° C-axis: 360° continuous Rotary table Diameter: 190 mm Maximum load: 10 kg A-axis speed: up to 100 rpm C-axis speed: up to 150 rpm Spindle Maximum speed: 40,000 rpm Power: approx. 6 kW Maximum power: approx. 7.7 kW Torque: approx. 1.6 Nm Bledpfx Asz Efpcomrsn High-frequency spindle with ULTRASONIC technology Feed rates Rapid traverse X/Y/Z: up to 10 m/min Tools Tool holder interface: depending on machine configuration Maximum tool length: approx. 130 mm Maximum tool diameter: approx. 49 mm Tool magazine: depending on configuration General data Power supply: 400 V Connected power: approx. 25 kVA Compressed air: approx. 6 bar Machine weight: approx. 1,800 kg TECHNOLOGY The DMG SAUER ULTRASONIC 10 combines high-precision 5-axis CNC machining with ultrasonic-assisted machining technology. This technology is particularly well-suited for machining difficult materials such as: Ceramics Carbide / hard metal Glass Corundum Technical materials and hard and brittle materials Machine particularly suitable for the micromachining, watchmaking, medical/dental, optics, and high-precision application sectors. Subject to errors and changes in technical data.

Condition: used, Year of construction: 2012, mast type: telescopic, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 2.760 kg Functional Lifting capacity: 230 kg Working height: 990 cm Dimensions of cargo space: 252 x 100 x 199 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Bledpfev Tiw Hjx Amrsn Max swing of arm in degrees: 75 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: Star10 Year of build: 2012 Condition: Used Data: Max. working height: 9,90 m Platform height: 7,90 m Max. reach: 2,85 m Platform lifting capacity: 230 kg Platform dimensions LxW: 0,99 x 1,00 m Swivel range: +/- 175° Max. climbing capacity: 23% Total dimensions LxWxH: 2,52x 1,00 x 1,99 m Movable up to working height: 9,90 m Wheel pressure max.: 13 kN Ground clearance: 0,07 m Drive type: Battery Own weight: 2.760 kg Information: only for closed indoor spaces Special features: Basket arm vertical rotation angle +/- 70°, white tires

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Blsdpew Swd Ajfx Amren

Condition: new, Tandem tipper 6 tons Body dimensions: 2750 x 1450 x 600 mm (internal) Solid body (4 mm steel plate) Telescopic cylinder up to 7 tons Own chassis Mechanical support leg Hydraulic tailgate LED lighting Blodpfxozbl T Ro Amren Total height: 1.55 meters Tyres: 15x55/17 PVG paperwork + certified Hydraulically braked axle + handbrake Condition: New

Year of construction: 2015, condition: used, Used Machine Year of Manufacture: 2015 Features and Technical Specifications - Stationary piston compressor with 2 two-stage, two-cylinder, high-performance gray cast iron units designed for a long service life - Maximum flow rate: 2 x 960 l/min - Filling capacity: approx. 2 x 750 l/min Bljdpez Ek Drsfx Amron - Maximum pressure: 10 bar - Tank capacity: 500 l - Motor power: 2 x 5.5 kW - Power supply: 400 V - Dimensions L x W x H: 2020 x 570 x 1340 mm - Sound pressure level at 1 m distance per DIN 45635: 83 dB(A) - With base load alternating control - 1st unit: 428 operating hours - 2nd unit: 418 operating hours

Condition: excellent (used), mileage: 816,359 km, power: 330 kW (448.67 HP), first registration: 10/2019, fuel type: diesel, tire size: 355/50 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,040 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, = Additional Options and Accessories = - (Roof) spoiler - Aluminum fuel tank - Climate control - Sleeper cab - Radio/CD player - Side mirrors with electric adjustment - Transceivers - Sun visor - Digital speedometer = Additional Information = General Information Cab: standard License plate: 31-BNV-4 Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 7,727 kg Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 355/50 R22.5; Max. axle load: 8000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle: Tire size: 295/60 R22.5; Max. axle load: 11,500 kg; Tire tread depth left: 20%; Tire tread depth right: 20% Condition Technical condition: very good Optical condition: very good Blodpoyymmwjfx Amrsn Damage: none

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm Blsdpfevc Avbsx Amrjn control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *

Year of construction: 1991, condition: used, Technical details: Pressure capacity: 10 bar volume capacity: 5000 l/min motor capacity: 37 kW voltage: 380 V dimensions L x W x H: 0,9x0,7x1,5 m Equipment: - air cooling Bledsu Nzx Eepfx Amron - suction opening = 500x400mm On sale as is, without test. Can be used as spare parts dispenser if necessary. *

Condition: used, Year of construction: 1998, Technical details: x-travel: 870 mm y-travel: 870 mm z-travel: 800 mm table surface area: BxT: 1.260 x 1.050 mm distance between columns: 1.260 mm Laser measuring system with ZETT3D geometry program The table is made of granite and has 48 mounting holes M6 integrated. With interface module Renishaw type P14-2 On machine is currently installed a shaft with probe pin 60mm (without extension) Probeset Renishaw type PH-1 stored in a wooden box. Operation manually, operated control panel with 2 control knobs, keyboard and 4-line LCD display. Bedpfx Aou N At Romreln Accessories: various probe tips and extension, calibration ball Printer Computer (Software Windows NT) Last calibration was at 06/2006. *

Condition: new, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Bedpfx Amoz E Il Torsln Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: used, functionality: fully functional, machine/vehicle number: 33124, mileage: 999 km, power: 235 kW (319.51 HP), first registration: 08/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 11.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Engine D0836LFLBI, MAN PowerMatic 08.12.OD torque converter automatic transmission, operated with steering column lever, manual (DNR selector), heated fuel filter, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full-brake assist, emergency brake assist EBA Plus, emergency brake signal, front axle with leaf suspension, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, MAN EasyStart hill start assist, exhaust pipe positioned high and to the left behind the cab, lane departure warning LDW, turning assist, MAN AttentionGuard driver alertness system, preparation for alcohol interlock, traffic sign recognition, distance warning, trailer hitch Rockinger 400G150B (40 mm) Cab CC (narrow, short, normal height), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, rain sensor, light sensor, LED headlights, LED daytime running lights, tinted windshield and door windows, lift-up roof, heated and electrically adjustable mirrors, electric windows, automatic climate control, multi-function steering wheel, safety automatic, cruise control, digital axle load display (ALM), MAN Media System Navigation Advanced 7-inch with navigation and Bluetooth hands-free system, rear view camera, smoker's package, 2x LED rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, sun visor on driver's door, sun shield Bljdpfxsz Ha Ivs Amrjn Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 11.5 m³ (sludge compartment approx. 10.5 m³ / water compartment approx. 1.0 m³), water compartment is welded into the front of the container with inspection opening, water compartment level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow line, 2x water tanks, each approx. 0.5 m³, on the left/right side of the container made of plastic, rear flap hydraulically opens upwards over the entire cross-section with pipe rupture protection, hydraulic latch locking, sludge compartment level indicator with external scale with divisions every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge apron made of stainless steel, 2 pneumatically operated slide valves, container discharge: free discharge through the lower suction connection or by tipping to the rear, vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the control panel, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are available, spray gun, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, hooks on the bottom flap for transporting long continuous hoses, waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the