Used Ima Advantage 310 for sale (8,533)

Condition: used, machine/vehicle number: 006089, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 30 m/min Kdjdpfey Nknwox Abfon Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: good (used), Year of construction: 2001, functionality: fully functional, IMA HKA manual edge banding machine in fully functional condition. Edge banding machine for shaped parts. Various pneumatic hoses have just been completely replaced. Edge thickness: 0.4 - 3 mm Kdsdpfxsx H Un Aj Abfon Board thickness: 16 - 45 mm Strip feed: 20 - 50 mm Power consumption: 2.6 kW Minimum outer radius: Dependent on the bending suitability of the edge material Minimum inner radius: 150 mm, depending on the material properties With gantry and spring tension Vacuum clamping table with 4 switchable zones Rollers, vacuum supports (plus additional new rubber sets) for the vacuum table #C1

Condition: used, machine/vehicle number: 005854, Type of edging: Thin edge, Thick edge Kedpfx Aov Hinxobfsdn Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3300 mm Max feed speed: 30 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, machine/vehicle number: 005657, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 30 m/min Kdedpjwcx Tusfx Abfsn Maximum panel thickness: 60 mm Operating Units: 13 nr

Condition: like new (used), Year of construction: 2003, functionality: fully functional, 30 packs/min – Siemens Simatic OP7 Shrink wrapping and bundling machine suitable for cosmetics and small packaged products. The machine forms bundles and wraps them in film, followed by a shrink tunnel for tight packaging. Equipped with upper and lower film reels and a manual film splicing system. The shrink tunnel features a cooling section at the exit and adjustable speed control. The machine accommodates different product and bundle formats and is supplied with documentation. Maximum output: 30 packs/min Hinge chain conveyor width: 80 mm Shrink tunnel conveyor width: 480 mm Control panel: Siemens Simatic OP7 Film system: Upper and lower film reels with manual splicing Shrink tunnel: With cooling section at the exit Speed control: Adjustable Ksdpfx Aeyt Hiqsbfjdn Product size (min / max) Length: 50 – 100 mm Height: 100 – 300 mm Width: 25 – 60 mm Bundle size (min / max) Length: 75 – 330 mm Height: 100 – 300 mm Width: 50 – 100 mm Additional information Overfeed system included Upper and lower film roll holders Documentation available

Condition: used, functionality: fully functional, Reportedly very little used IMA model TR 135 medium speed blister packaging machine. - Manufacturer: IMA - Model: TR 135 - Forming capacity: max 90 cycles/min - Cutting capacity: max 230 cycles/min - Control system: Color touch screen - Feeding system: Pre-feeder hopper with capacity 45 litre + bowl with vibrator - Power supply: 400 V, 50 Hz (max power 12 kW, average power 7 kW) Kedpfx Aoy Slchjbfjdn - Air supply: 700 Nl/min, 6 - 8.5 bar - Cooling device: Chiller Euro cold ACW-LP 16T Blisters: - Blister: PVC/ALU blisters. - Size range: Width 30 - 88 mm x Lenght 60 - 135 mm x Thickness 3 - 12 mm - Available parts: Possible to supply with IMA A83 horizontal cartoning machine

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) Kdsdpfx Ajwkba Tsbfsn - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: used, machine/vehicle number: 005639, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Kdodovw Evgepfx Abfen Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 50 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

Condition: ready for operation (used), Year of construction: 2000, Two complete blister packaging lines from the pharmaceutical industry are available. 1.1) Automatic case packer IMA CP 28 BA, year of manufacture: 2000, min. carton dimensions X/Y/Z: 220mm/120mm/120mm, max. carton dimensions X/Y/Z: 600mm/400mm/350mm, output: 8cartons/min, machine dimensions X/Y/Z: approx. 4900mm/1900mm/2650mm, weight: approx. 1500kg. 1.2) Bundle wrapping machine IMA BFB MS 300 A with stretch banding, year of manufacture: 2005, bundle length range: 20mm-360mm, bundle width range: 55mm-220mm, bundle height range: 55mm-220mm, output: approx. 40bundles/min, max. film roll diameter: 300mm, machine dimensions X/Y/Z: approx. 2900mm/1300mm/1950mm, weight: approx. 1500kg. 1.3) Mini robot. Overall line dimensions X/Y/Z: 10750mm/2350mm/2250mm, transport weight 1/2: approx. 4700kg/5000kg, total weight: approx. 10000kg. Without shrink tunnel. 2.1) Blister packaging line IMA Giant 1 BH 100 A, year of manufacture: 2006, products: tablets/capsules, design: modular, max. packaging output: approx. 350blisters/min, max. blister dimensions X/Y/Z: 90mm/145mm/12mm, max. carton dimensions X/Y/Z: 100mm/155mm/105mm. Line dimensions X/Y/Z: approx. 7100mm/1300mm/2250mm. Documentation available. An on-site inspection is possible. A package sale is preferred. Expected to be available from October 2026. Kdedpfoy I Acqsx Abfjn

Year of construction: 1998, condition: good (used), Screwcapper for plastic caps diameter 50mm x 20mm H 380v 7,5kw machine with cap feeder/sorter and no cap detection. Kodjh Np Uqepfx Abfsdn speed up to 50/min as-is or adjusted to customer needs

Year of construction: 1998, condition: good (used), I sell the edge banding machine IMA HKA. Suitable for curved shaped edges Good condition, possible to test ! Kjdeg Dvriepfx Abfsdn

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, This 3-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details. Working area X: 3000 mmWorking area Y: 1200 mmMax. clamping height Z1: 100 mmMax. workpiece thickness Z2: depending on equipment/applicationTable height: approx. 1000 mmPendulum operation X: 2 × 1400 mmFree space center X: 200 mmPendulum operation alternative X: 2 × 900 mmFree space center alternative X: 1200 mmMachine weight: approx. 6000 kgGuide system: precision linear guides hardened approx. 62 HRCCentral lubrication: automatic for all main axes and ball screwDrive system: AC servo motors with encoderX/Y drive: rack and pinionZ drive: ball screwFeed rate: 40 m/minRapid traverse X/Y: 80 m/minRapid traverse Z: 25 m/minAcceleration: 3 m/s²Extraction connection main spindle: 300 mmExtraction connection drilling spindles: 120 mmAir speed: approx. 28 m/sAir volume: approx. 7080 m³/hVacuum pump capacity: 100 m³/hCompressed air connection: 1/2"Air pressure: 6 barControl voltage: 24 V DCConnected load: approx. 24 kVAPower supply: 3/N/PE 400/230 V 50 HzFrequency converter: 0–480 HzAmbient temperature: +15 to +35 °CControl system: IMATRONIC NT 231Interpolation: linear all axes, circular 2.5DResolution: 0.001 mmSpindle: HSK F63Tool clamping force: 11000 NMax tool weight: 6 kgSpeed range: 1500–18000 rpmSpindle power: 7.5 kWCooling: water cooledCNC axis: 360° rotatingTool magazine type: plate changerTool positions: 18Max tool length: 150 mmMax tool diameter: 100 mm (150 mm with free сосед positions)Max load: 60 kgSaw unit motor: 1.5 kWSaw speed: 5600 rpmSaw blade diameter: max. 150 mmDrilling unit: 14 spindlesSpindle stroke: 70 mmDrive: 2.2 kWSpeed: 3150 rpmDrill diameter max: 20 mmAdapter head spindles: 4Speed max: 6000 rpmDrill diameter max: 12 mmTable equipment:6 adjustable support arms12 suction cups 114 × 159 × 100 mm6 suction cups 125 × 75 × 100 mmVacuum system: 2-circuit clamping systemElectrical cabinet size: 2000 × 1800 × 600 mmDEFECT: The main spindle no longer releases the interchangeable drill head Kdedpfx Ajy Aw N Usbfon

Condition: good (used), IMA LED set-up aid used in working condition. about 60 LEDs Kdjdpfxsbxx Iuo Abfjn 15 pin serial port on both sides Dimensions 18 x 56.7 x 312 mm including 10 mm for the connectors Direct purchase in our internet shop on our homepage

Year of construction: 2007, operating hours: 138 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 900K707385, Tablet Press PRESSIMA – as new, in ex-works condition Fully functional machine with complete documentation and software. Kdsdpfx Aoy Hl Aqsbfjn Including multi-tip tooling set EU-D (5 × 4mm) (purchase price: €12,000, 6 months old) as well as a single-tip tooling set (5mm) EU-B. Both punch sets supplied by Ritter. The machine is equipped with an interchangeable turret. Both B- and D-type tooling can be used, in either EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital readout on the machine panel • Digital display of parameters set via handwheels • Note: No automatic control system available Technical Data • Speed: 10–75 rpm • Max main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Two-wheel feeder, variable speed • Drive motor: frequency controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total power consumption: 1.5 kW • Machine housing and press area: stainless steel • Press area unpainted, easy access, hard-nickel-plated surfaces • Central extraction port • Central manual lubrication pump for punches • Automatic lubrication pump for punches and guideways • Feeder motor integrated in the headpiece Mechanics • Handwheels for tablet thickness, main pressure, pre-compression, and fill • Rotary flap between fill tube and feeder • Solid pre-compression and main compression stations • Scrapers on upper and lower punches • Magnetic brakes on lower punches • 12 mm fill shoe as standard • Lower punch is lowered after dosing • Lower guideway and ejection rail easily removable • Machine status display on control panel Measuring and Analysis System • MS2300 for recording and analysis of up to 16 channels • Measurement/analysis of: o Main compression (upper) o Main compression (lower) o Pre-compression (upper) o Ejection force o Scraping force o Upper and lower punch displacement • Measuring amplifiers for main, pre-comp, ejection, and scraping force included Equipment / Features • Upper and lower punch shank bores with 4.8 mm keyways for guided tooling • Chamber-type feeder • Turret hard chrome plated • Main compression force measurement incl. indicator on operator terminal • Accessory kit type 8 MX: o 4 EU-B blank dies o 4 EU-D blank dies o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, feed rate X-axis: 30 m/min, controller model: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cut-off saw unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile trimming unit Manufacturer model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Scraper blade unit Manufacturer model: 08.519 Unit: Glue scraper unit Manufacturer model: 08.521 Kdedpfx Asyzy Iwobfen Unit: Brushing unit Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for coil material Tank for hot-melt adhesive Edge pressure roller unit Pressure by rubberized belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Condition: good (used), Year of construction: 1989, Machine with full equipment Length approx. 9 m Kodpfxef Ua R Ho Abfjdn Edge gluing Edge sawing Pre-milling Rounding milling Corner copying Pull scraper Buffing Corner copying

Condition: reconditioned (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 3300 Numerical Control / Software ICOS open (Windows XP) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 7 - 35 Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling unit (joint Trimmer) 08.379 (2 X kW 4) Ksdpfx Asyyya Debfodn EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Pressure zone (N.C. adjustment) + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (2 X Kw 0,66) Max 30 m/min Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (1 x Kw 0,5 ca.) 30 m/min Profile Scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Ksdpfxod Nt Rqe Abfodn Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 Working width (min/max) mm 236 / 1300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 / 50 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Kjdpfxodh Tfge Abfedn Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x 1 kW) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 6 Rough Trimming unit 08. 0555 (2 x 1 kW) max. 3° Fine Trimming unit 08. 055 (2 x 0,66 kW) 30° + 30 m/min Glue scraping unit 08.517 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0,18 kW) Free space

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Veneer edges limited possible up to max. 1.0 mm Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. - Panels in-feed system 63.152 (mm 500 x 500) Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Kodpfx Ajxp E R Debfodn Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone + Edge coils supporting unit (No 1 + 6 reels) Trimming unit 08.055.0.1680 (Kw 1,85 x 1) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 20 + 30 m/min (0°-25°) Fine Trimming unit 08.0587 (Kw 1.0 x 2) Multi Profile - ( 1 + 3 profiles) by N.C. Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,18) 20 m/min Profile Scraping unit (Multi-profile, by N.C.) 08.516 (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0.18 x 2) Milling Grooving unit 08.190 (Kw 4,5 x 1) swivelling 90°/180°/270° (adjustable by CN) (H + V)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 250 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (PUR. Glue + Quick Melt system + EVA Glue) VTG 3-24 + 283.201 + 283.19 + 283.203 Pressure zone Edge coils supporting unit (No. 24 reels) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Profile Scraping unit 08.515 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) Kdjdpfx Absxggthjfon No. 3 Grooving units 08.190 (2 x Left-hand + 1 x Right-hand) (Kw 4,5 x 3) swivelling 90°/180°/270°

Condition: refurbished (used), SINGLE-SIDE SIZING & EDGE BANDING MACHINE (Left side machine) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 1 ALU Panels thickness (min/max) mm 6 - 55 Numerical Control /Software IMATRONIC 121 /01 Adjustable feeding speed (m/min ) 6 - 30 SIZING PART : Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 4,5) 08.376 Spraying unit (Anti-sticking liquid) EDGE-BANDING PART : Lamps to heat the workpieces side + Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1569 Band Pressure zone mm 1000 + Edge coils supporting unit (N. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) working speed 25 m/min (swivelling 0-25°) Rough Trimming unit 08.0555 (2 x Kw 1) Fine Trimming unit 08.055 (2 x Kw 1) 30° + Spraying Unit (for sliding liquid) Multi-Profile Copying unit 08.348 (fine and contour trimming) adjustment by N.C (2 x Kw 0,66) Profile edge scraping unit (Multi-profile, adjustable by N.C.) 08.516 Kdsdpfecr T N Dox Abfjn Glue scraping unit 08.517 (Pneumatic) Spraying Unit (for polishing liquid) Buffing unit 08.614 (2 x Kw 0,25) Milling grooving unit 08.183 (1 x Kw 3) Smoothing unit with spheres 08.53 Chamfer Sanding Unit for straight edges WI (4 x Kw 0,75)

Condition: excellent (used), C.N.C. WORKING CENTER with 5 axes (X-Y-Z-C-5) routering, boring, cutting and edge banding Goose-neck machine - Front emergency carpets Safety cabin (enclosure) of the working head Numerical Control Type ICOS CNC - Software IMAWOP Working table with pods and rails (No. 8 rails x mm 1400) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store with No. 18 positions) Useful working area (X - Y - Z) mm 4000 x 2100 x 300 Useful working area (X -Y - Z) in edge banding mm 4000 x 1800 x 60 Nr. 2 Working areas - Vacuum pump / capacity (m3/h) 140 Motorized carpet to evacuate the wastes from the working process Separate electric and command cabinet - Total power installed Kw 32 Working group (top head) Nr. 21 Independent vertical boring spindles (4 X Kw 1,2) Nr. 1 Vertical Electro-spindle HSK F63 ROBOT (Kw 16) Edge Banding group (ready on board) with Glueing Unit (Hot Melt) VT 100 Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Edge coils supporting unit (Nr. 2 reels) OPTIONALS: Circular saw aggregate (diam. mm 200) Combined aggregate (Flush-Trimming/Scraping) Kdodpfxehu U Nxj Abfen Drilling Aggregate (with 4 horizontal boring spindles)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins "Hopper Feeder" (panels fall directly onto the feeding chains) Distance (center-axes) of the Disappearing Dogs (mm) 270 Kjdpeum Untsfx Abfjdn SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Fine Trimming unit 08.055 (2 x Kw 0,66) 30 m/min Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18) Free space

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, composed of the following machines: OZ2050A) Loader (Double-cage, double pick-up) "MEINERT" Mod. P 415 D/B - L with central motorized rollers table. With two external roller ways to in-feed the piles (stacks) of panels to loader. OZ2050B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 440 / A / R3 OZ2050C) Connecting Roller Table "IMA" Mod. IDK L/Q with turning device (from lengthwise to crosswise) with double cone system. OZ2050D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 590 / B / R3 OZ2050E) Connecting Roller Table "IMA" Mod. IDK Q/L with Turning device (from crosswise to lengthwise) with double cone system. Kedpjxftt Eefx Abfodn OZ2050F) Unloader (Double-Cage, double storage) "MEINERT" Mod. P 415 D/S - L With central motorized rollers table. With 2 on-ground motorized roller ways to out-feed the piles (stacks) of panels from the Unloader.