Used Honeywell Flame Simulator for sale (545)

Condition: new, Year of construction: 2024, empty load weight: 178 kg, Dreipunktstreuer D301 0.3m³ Description: Spreader with three-point linkage (CAT 1) and a single spreading material chamber. The spreading material is conveyed via an auger and distributed by the patented spreading disc unit. Hydraulically driven motors, controlled by Kugelmann hydraulic block. All drives can also be operated manually in the event of control failure. Chain drive ensures high torque when starting the auger. Corrosion-resistant material combination: stainless steel subframe (VA) and plastic spreading material hopper. Support legs can be folded up towards the spreader during operation. Features: - Hydraulically driven single-chamber spreader with auger and spreading disc - Corrosion-resistant combination of stainless steel subframe and plastic hopper - Dimensions (WxDxH): 1080 x 590 x 1200 mm - Unladen weight: 178 kg - Includes apron/splash guard - Includes tarpaulin cover - Includes road lighting (compliant with StVZO) - RAL 2011 signal color - Manual emergency operation - Foldable support legs - Low energy consumption - Operable from an oil flow rate of 15 l/min - Patented spreading disc unit - Manual adjustment of spreading pattern Lredpfxsx S Tpve Ab Aou - Winter service marked with reflective white warning film - Can be operated without control unit (via control cabinet key on easily accessible side) - Mounting for CAT 1 Standard Equipment: - Hydraulic drive for auger and spreading disc - Stainless steel (VA) subframe with RAL 2011 signal paint - Stainless steel spreading disc - Plastic spreading hopper - Plastic spreading disc guard - Mesh tarpaulin cover - Apron - LED lighting in accordance with StVZO - Foldable support legs (remain on device during use) - Manual adjustment of spreading pattern - Winter service marking - Operation possible without control unit - All drives are regulated and equipped with manual emergency operation - Hydraulic hoses with SVK couplings for forward and return - Spreader is fully storable (can be set down) Carrier Vehicle Requirements: - min. 20 L/min at reduced spreading output - max. 50 L/min with external oil cooler - Kugelmann system internally rated at 230 bar - Carrier vehicle with mounted spreader must not exceed permissible axle load or gross vehicle weight Optional Equipment: - k-basic 2 control unit - Wiring harness (flying) - Microprocessor control with CAN-BUS technology - Closed loop control of all drives (with feedback) - Functions: > Adjust spreading width > Adjust spreading density > Rotating beacon on/off > Work light on/off > Spreader operating/pause > Illuminated keys and rotary controls > Data recording > Speed simulation > x2 key for travel-dependent spreading (compatible with k-basic 2) - Option: Travel-dependent spreading incl. start/stop function – driving signal required - LED work light 12V Storage location: not specified

Condition: ready for operation (used), Year of construction: 2019, total height: 4,125 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, overall weight: 5,530 kg, table load: 4,500 kg, number of axes: 3, This 3-Axis Mora Primus 152012 was manufactured in 2019. It features a large measuring range with X-axis at 1500 mm, Y-axis at 2000 mm, and Z-axis at 1200 mm. Supports a maximum load of 4500 kg, ensuring robustness for various tasks. With a vector speed up to 519 mm/s, it offers efficient operations. If you are looking to get high quality measuring capabilities consider the Mora Primus 152012 machine we have for sale. Contact us for more information. Additional equipment Ljdpfx Aoyaacqjb Ajru • 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) • Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller • Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) • Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters • FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system • Ø 30 mm reference sphere • INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) • Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer Machine Benefits Qualitative Machine Benefits • Condition: new, factory-sealed, immediate availability Technical Machine Benefits • Accuracy (iso 10360, typical with sp25m): mpee 3. 0 + l/300 µm | mpep 3. 0 µm | mpe_thp 4. 4 µm / 68 s • Dynamics: up to 519 mm/s | 1,732 mm/s² • Probing/scanning: renishaw ph10m + sp25m (sm25-1…-5), fcr25/fcr25-tc (temperature-controlled) • Software: inca3d premium (iges/step, scan options) • Operating conditions: 20 °c ±2 °c; temperature gradients ≤ 1 °c/h and ≤ 1 °c/m • Pneumatics: 6 bar, dry and oil/particle-free • Power (controller): 90–240 v, 50/60 hz, 16 a; approx. 600 va (psu up to 2,000 va) Dimensions Machine Depth 2505 mm

Condition: used, mileage: 111,385 km, power: 294 kW (399.73 HP), first registration: 02/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2024, brakes: retarder, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, We are very pleased that we have aroused your interest with our offer and can already assure you that you can buy a good and reasonably priced vehicle with a traceable service history from us! Cool box INTARDER CB Radio AIR-SUPPORTED Power take-off WHEEL STAND 4,500 mm ORIGINAL KM !!!!! Special equipment: Storage box, Trailer coupling: Rockinger 400 G 150 A, Aerial car phone, Working lights (2) on cab roof, Exterior mirrors and wide-angle mirror, electr. adjustable and heatable, Curb mirror right electr. adjustable and heatable, Comfortshift gearshift, roof antenna CB radio, differential lock rear axle, ETA automatic safety device, cab: electro-hydraulic tipping device, cab: with air suspension, comfort driver's seat, air-suspended and heated, with lumbar support and shoulder adjustment, flame start system, fuel tank: aluminum combi tank - 600 ltr. diesel + 60 l urea solution (AdBlue), heated air dryer, Eberspächer D4S auxiliary air heater, NH/4C power take-off without flange, retarder, electric sliding/lifting roof, exterior sun visor, 12V and 24V cab socket, reinforced front axle shock absorbers, door extension for cab, VOK-09 offset front axle, additional high beam/fog lights with cornering light Further equipment: Lrsdpfx Abjx Ibbrj Aeu Axle configuration: 6x2, ambient lighting, collision/front mirror, trailer socket 24V / 7-pin, trailer socket ABS, traction control (ASR), audio system: MAN Media Truck Advanced 12V radio with navigation system preparation, 175 Ah battery, MAN-Tronic on-board computer, MAN-Brakematic electronic braking system, EURO 6 engine, cab: With Nordic insulation, Cab: XLX, Suspension: BLATT/air, Electric windows, Remote control central locking, Tinted windshield, Generator 28 V 80 A, 16-speed gearbox - Type: ZF 16 S, Body/bodywork: Chassis, Rocker arm - brake EVB, Automatic air conditioning, Heated fuel filter, Steering wheel with multifunction, Raised air intake, Air compressor 1-cyl. 360 ccm, Engine 10.5 ltr. - 294 kW diesel, engine compartment encapsulation, spare wheel holder behind rear axle, rear axle disc brakes, front axle disc brakes, side protection, tinted rear side windows, seat cover/upholstery: Comfort quality, Sun protection roller blind for windscreen, Sun protection roller blind for side window, Driver's door, Spray mist reduction, Stabilizer bar on one rear axle, Stabilizer bar front axle, Storage box accessible from outside, Control unit type cab, Tinted door windows, Rear underride guard, Front underride guard, Visco fan, Central locking, Perm. Gross vehicle weight 26.00 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING On request, we will be happy to provide you with a LEASING-MIET PURCHASE or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-PRÜFUNG / tacho check / installation of OBU device and service by our MARKENWERKSTATT on site TOLL / ROAD CHARGES Tolls can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt airport 150 KM away Frankfurt-Hahn airport 40 KM away Luxembourg airport 75 KM away Sale according to our AGBs. The details on the Internet are non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr

Condition: new, Year of construction: 2022, functionality: fully functional, Kunzmann WF 410M tool milling machine with Heidenhain TNC 128 control. Brand new and CE-compliant! Technical specifications: >> Year of manufacture 2022 Machine no. 411555 >> Milling table clamping area 650 x 375 mm Clamping slots 5 Slot width 14 H 7 Slot spacing 63 mm Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed X, Y, Z axes (infinitely variable) up to max. 5/5/4 m/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Connected load 13 kVA Accessories and equipment: >> Heidenhain TNC 128 control >> Heidenhain HR electronic handwheel 510FS >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Machine light >> Minimum quantity lubrication >> Counterholder >> Digital display for spindle stroke >> Oriented spindle stop (tapping without compensating chuck) >> Chip protection cabin >> KT 130 edge finder >> Coolant system >> 200 mm rotary table >> Dividing head with 125 mm three- and four-jaw chuck >> 125 mm hydraulic vise About the machine: Ledpjv Rppkjfx Ab Aoru Offered is a Kunzmann WF 410M tool milling machine, built in 2022, in new condition with a Heidenhain TNC 128 control. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for fast and easy data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole pattern, rectangular pockets, rectangular tenons, and multi-pass milling of surfaces. A very easy-to-use control system. The machine also has hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on site with power on.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 0400-01-0010000, type of input current: AC, overall weight: 2,750 kg, input voltage: 10,000 V, input frequency: 50 Hz, total height: 1,953 mm, total width: 1,000 mm, total length: 1,600 mm, warranty duration: 72 months, nominal power (apparent): 1,000 kVA, nominal power: 1,000 kW (1,359.62 HP), secondary voltage: 400 V, protection type (IP code): IP00, temperature: 40 °C, empty load weight: 2,750 kg, space requirement width: 1,600 mm, space requirement length: 1,000 mm, space requirement height: 1,920 mm, ambient temperature (max.): 40 °C, roll spacing: 820 mm, Equipment: documentation/manual, type plate available, Three-phase cast-resin transformer Designed according to DIN EN 60076-11, VDE 0532, with separate winding Reduced no-load losses in accordance with Ecodesign Regulation EU No. 548/2014, Eco Directive 2009/125/EC Design features: - Flame-retardant and self-extinguishing - High-voltage winding vacuum-encapsulated, low-voltage winding vacuum-impregnated - Partial discharge-free (< 5 pC) - Taps can be changed in the de-energized state using switch lugs - Mobile design, 4 interchangeable transport rollers - Winding material: aluminum/aluminum - 4 lifting eyes, 4 draw eyes, 2 grounding screws - Documentation: Dimensional drawing, nameplate, data sheet, circuit diagram, operating instructions in German/English - Use of double-sided insulated, grain-oriented, low-loss electrical steel sheets - Reduced power losses A0 Level 2/Ak (Eco Directive 2009/125/EC) - Suitable for converter operation, THDu < 5% - 3x PT100 connected to terminals in the terminal box (IP 54) RATED POWER: 1000 kVA CIRCUIT: Dyn5 OVERVOLTAGE: 10 kV, with a value of ± 2x 2.5% Lredpfx Aov U Ncreb Asu FREQUENCY: 50 Hz UNDERVOLTAGE: 400 V + N SHORT-CIRCUIT VOLTAGE: 6% (tolerance ±10%) NO-LOAD CURRENT: 0.6% (tolerance +30%) INSULATION LEVEL HV (AC/LI): 12/28/75 kV – L2 INSULATION LEVEL LV (AC/LI):

Condition: used, color: orange, Warranty: 24 months Productivity: 100 tph Polygon can produce mobile or fixed asphalt plants with capacities of 60-240 tons/ hour.High quality asphalt plant are produced with experienced staff. Polygon batch Mix Asphalt Plants Advantages Optimum price, high performance Precision weighing and high quality blend High efficiency rotary dryer and burner Easy Maintenance 7-24 after sale support Possibility of asphalt mixing plant spare parts at reasonable prices Operator friendly asphalt plant automation system Easy assembly and disassembly possibility Products suitable for different asphalt production (mastic asphalt, colored asphalt, recycling​ Aggregates are typically moved from the stockpiles to the cold feed bin using a front-end loader. Cold feed bins are used to dosage the different aggregates used in the mix to the drying drum. Our Advantages; Thanks to its functional design, it facilitates transportation and installation. Attachments have bolted design. Thanks to its high strength silo casing and twisted body undergoes no change in shape under load. Thanks to the frequency-controlled dosing bands, each material can be supplied in any desired rate. The flame size of the dryer burner can be controlled automatically with the measurement sensor (optional)​ Polygon asphalt plant mixer provides long wear parts life and homogeneous blend. Features; Heavy duty group high quality reducer. Ljdsx D A N Tspfx Ab Ajru Heat and abrasion resistant inner liners Long life arms and paddles Double-valved discharge system Discharge valve with external resistance heating Polygon-asphalt plant filter system separates the gas and dust generated during asphalt production. The decomposed filler dust can be used in mixture if desired. Features; Input and output temperature measurement Clean air valve to protect bags from burns Nomex filter bags with vertical casette Dust-proof design Easy bag changing Reverse air flow bag cleaning system Insulation suitable for climate conditions and heat transfer ​The dust collection system includes supporting feet for easy installation and implementation. The filter dust collection system is perfectly tailored to the mixing plant capacity. The vertical layout-of the filter bags guarantees maximum utilisation of the surface area with efficient filter function. Polygon dryer creates a maximum heat transfer surface thanks to its special wing design. With minimum fuel consumption, it allows the removal of humidity of aggregate and heat it up to the desired temperature. Our Advantages; Dryer rollers and rings are manufactured from long-life forged steel. Easily interchangeable bolt-type compensation springs that distributes body load evenly Suitable for stainless steel insulation coating and heat transfer, rockwool covered body With soft starter support, operation without problem under load Automatically adjustable burner according to humidity and amount of aggregate (optional The drum tube, which is made of a thick-walled, solid steel construc- tion, achieves maximum efficiency, very low exhaust gas temperatures and prevents temperature losses during the...

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Ledpfjw D E A Ejx Ab Ajru

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Lrodpfx Asytr Swsb Asu Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: H4-400_1, stroke length: 300 mm, throat depth: 400 mm, operating speed: 100 mm/s, reverse speed: 80 mm/s, oil tank capacity: 180 l, overall weight: 23 kg, total length: 6,150 mm, total width: 2,700 mm, total height: 3,400 mm, power: 30 kW (40.79 HP), pressing force: 400 t, clearance between the columns: 3,600 mm, table width: 4,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, Cone H4-400 Hydraulic Press Brake - DA-66S CoastOne - Finland Lredey Efczopfx Ab Aou Technical Specifications Cone H4-400: Bending force: 400 tons Bending length: 4100 mm Cylinder spacing: 3600 mm Stroke: 300 mm Width: 500 mm Throat depth: 400 mm Table height: 985 mm Length: 6150 mm Width: 2700 mm Height: 3400 mm Approach speed: 100 mm/s Return speed: 80 mm/s Bending speed: 10 mm/s Oil tank: 400 l Weight: 22.5 tons Main motor: 30 kW Standard Equipment: - CNC-controlled X, R, Z1, and Z2 axes - 2 backgauge fingers - Delem DA-66S Graphical Control - CNC-controlled crowning device type 1 - AMADA Promecam tool holder - LazerSafe LZ2 front safety laser + PLC + rear light curtain - Standard punch and 4V die - Integrated LED lighting on the ram as front lighting Delem DA-66S Graphical Control: - 24-inch high-resolution touchscreen - 2D graphical programming interface - 3D machine visualization in simulation and production - Supports 3- to 8-axis control - Includes offline programming software Profile-T Lite – T2D - USB and peripheral interfaces - User-specific application support in the control's multitasking environment - Interface for sensor bending and automatic angle correction

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system -Shaft diameter: 30 mm -Shaft length: 220 mm (260 mm with socket) -Total length: 405 mm -for: 16 mm nozzle diameter -Weight: 1.3 kg Lrjdefhxpxjpfx Ab Aou

Condition: new, Year of construction: 2024, Folding press AD-S 40220 | 4 meters, 220 tons Everything can be configured according to your wishes, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data: Bending force: 220 tons Bending length (mm): 4050 Distance between stands (mm): 3600 Stroke (mm): 265 Installation height (mm): 530 Overhang (mm): 410 Table height (mm): 900 Table width (mm): 104 Y rapid traverse (mm/sec.): 160 Y working speed (mm/sec.): 10 Y return speed (mm/sec.): 140 X-axis working speed (mm/sec.): 250 Lrodpfx Aefirx Djb Aou R-axis working speed (m): 140 R-axis travel: 250 X-axis distance (mm): 650 Motor power: 22 kW Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 14750 kg Standard equipment: Control: CNC Cybelec ModEva 19T CNC-controlled motorized crowning European tool clamping system / or Durma clamping system according to customer requirements Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes for back gauge: X1, X2, R1, R2, Z1, Z2 Control: DELEM DA-66T Delem 66T – 69T or Durma control can be selected DAM – Durma angle measuring system Hydraulic upper tool clamping: Wila NSCL-I-HC/UPB – PRO – 180 t/m Hydraulic lower tool clamping: Wila NSCR-I-HC-CNC/UPB – PRO Power pack for hydraulic clamping D-BEND 3D CAD/CAM import and simulation program AP3 & AP4 bending aid 750mm to 1500 mm selectable Parking area for support arms (1000mm) TANDEM preparation Laser bending line Oil heating Central lubrication, manual or motorized Air conditioning for control cabinet

Condition: new, Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s, ±0.05° Tube length ----- 1,350 ∞ mm Weight ----- 2200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0–850°/sec Length feeding ----- Standard: 0–2,400 mm/sec Booster ----- 0–1,200 mm/sec Degree of tolerance ----- 0.05°/mm Bending head rotation ----- 0.75 sec Standard components comply with VDMA, ISO, and DIN standards. OPTIONS * Online connection with CAD system and measuring machine Lredpfoga T Exsx Ab Asu * Automatic tube magazine with freely programmable robot or loading arm * Weld seam detector and tube positioner with electromagnetic or optical detection * Free radius bending * Simulation/Collision Control * Bed length extension

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine -Feed rate: adjustable Lredpfx Abjfdb Uqe Aeu -Dimensions: 460/210/230 mm -Weight: 7.6 kg

Condition: used, Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 Ljdpfx Absh Uhlio Aoru -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3225-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 10.0 mm - Nominal pressure: 2500 kN - Max working length 3200 mm - Throat depth: 400 mm - Max stroke: 250 mm - Daylight: 535 mm - Distance between side frames: 2500 mm - Max backgauge distance: 600 mm - Nominal motor power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11600.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences Lrsdjium Hkepfx Ab Aou - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, Year of construction: 2023, For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the network using the SQL protocol or via the connection of Rs232 / Ethernet. Logo and Special Characters - Import and markup logo from images (BMP, JPG, PNG) and vectors (DXF, PLT, AI). Barcodes - Fixed and variable essence marking in 2D dot matrix codes QR codes barcodes. Adjustable marking parameters - Marking power, speed and frequency with line space and shape - Wiggle. Design support tools - You can customize your logos and schemes using the built-in character and design menu create. Or you can rearrange and tag your existing uploaded drawings. Marker location preview and pre-marking red beam simulation. Marking area X-Y Preferred:: 110x110mm / 150x150mm / 170x170mm / 200x200mm / 300x300mm, Laser technology: 1064nm - MOPA fiber laser with fixed pulse Yb and maintenance-free Laser power: 20W - 30W - 50W Lsdpfxjlfilye Ab Asru Frequency range: 1 - 600 kHz programmable Marking speed: max. 650 characters / second Weight 4U Laser Control Cabinet: 15 kg Marking head with Z-column and table:: 10 kg Interface, communication: USB, Ext I / O configuration for automation systems, Standard hardware: Motorized and programmable fully automatic focusing system and its sensor Connected load: 300W (220V / 50Hz) Dimensions W x D x H: 717x360x754mm colour: Grey

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 5 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal ,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Lsdpfx Asvwfmlsb Aoru

Condition: used, mileage: 477,163 km, power: 176 kW (239.29 HP), first registration: 12/2006, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro4, Equipment: ABS, Tel.: Call (Contact · Telephone · Mobile · WhatsApp) Special equipment: Tow coupling Ringfeder 6441, rear crossmember, car phone antenna, audio system: MAN CD radio 24V, electrically adjustable and heated exterior mirrors, wide-angle exterior mirrors electrically adjustable and heated, left, wide-angle exterior mirrors electrically adjustable and heated, right, battery 140 Ah, mechanical battery master switch, kerb mirror left electrically adjustable and heated, kerb mirror right electrically adjustable and heated, rear axle differential lock, entrance lighting driver's/passenger's side, driver's seat comfort, air suspended, electric window regulators, flame start system, tinted windscreen, mechanical lifting roof, rocker - brake EVB, fuel tank: 200 L, reading lights for driver and passenger, raised air intake, dry air filter right below, seat upholstery: comfort quality, exterior sun visor, tinted door windows, central locking Additional equipment: Axle configuration: 4x2, on-board computer MAN-Tronic, compressed air connection front, electronic brake system MAN-Brakematic, EURO 4 engine, cab: C (Compact), suspension: leaf/air, generator 28 V 80 A, gearbox type: Eaton 8309, rear axle HY-0925, body/chassis: chassis, heated fuel filter, adjustable steering column (steering wheel), engine 6.9 l - 176 kW Diesel, engine brake, spare wheel carrier behind rear axle, disc brake rear axle, disc brake front axle, rear axle stabilizer, plastic bumper, underride protection rear, underride protection front, viscous fan, front axle VOK-05 cranked, permissible gross vehicle weight 11.99 t * MAN TGL 12.240 4x2 BL * Refrigerated box fresh service * Thermoking unit * Engine and electrics running Lrjdjvrnryjpfx Ab Aou * Tail lift with safety lock * Euro 4 * Automatic transmission * VIN: WMAN14ZZX7Y180436 * Year of manufacture: 07.12.2006

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; Lrsdpfx Aevtn Hmjb Aeu - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: used, mileage: 111,385 km, power: 294 kW (399.73 HP), first registration: 02/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2024, brakes: retarder, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, We are very pleased that we have aroused your interest with our offer and can already assure you that you can buy a good and reasonably priced vehicle with a traceable service history from us! Cool box Lrsdpfxjvk H D So Ab Aou INTARDER CB radio Air suspension TIRES 315 / 80 R 22.5 ORIGINAL KM !!!!! Special equipment: Storage box, Trailer coupling: Rockinger 400 G 150 A, Aerial car phone, Working lights (2) on cab roof, Exterior mirrors and wide-angle mirror, electr. adjustable and heatable, Curb mirror right electr. adjustable and heatable, Comfortshift gearshift, roof antenna CB radio, differential lock rear axle, ETA automatic safety device, cab: electro-hydraulic tipping device, cab: with air suspension, comfort driver's seat, air-suspended and heated, with lumbar support and shoulder adjustment, flame start system, fuel tank: aluminum combi tank - 600 ltr. diesel + 60 l urea solution (AdBlue), heated air dryer, Eberspächer D4S auxiliary air heater, NH/4C power take-off without flange, retarder, electric sliding/lifting roof, exterior sun visor, 12V and 24V cab socket, reinforced front axle shock absorbers, door extension for cab, VOK-09 offset front axle, additional high beam/fog lights with cornering light Further equipment: Axle configuration: 6x2, ambient lighting, collision/front mirror, trailer socket 24V / 7-pin, trailer socket ABS, traction control (ASR), audio system: MAN Media Truck Advanced 12V radio with navigation system preparation, 175 Ah battery, MAN-Tronic on-board computer, MAN-Brakematic electronic braking system, EURO 6 engine, cab: With Nordic insulation, Cab: XLX, Suspension: BLATT / air, Electric windows, Remote control central locking, Tinted windscreen, Generator 28 V 80 A, 16-speed gearbox - type: ZF 16 S, Body/bodywork: Chassis, Rocker arm - brake EVB, Automatic air conditioning, Fuel filter heated, Steering wheel with multifunction, Air intake raised, Air compressor 1-cyl. 360 ccm, Engine 10.5 ltr. - 294 kW diesel, engine compartment encapsulation, spare wheel holder behind rear axle, rear axle disc brakes, front axle disc brakes, side protection, tinted rear side windows, seat cover/upholstery: Comfort quality, Sun protection roller blind for windscreen, Sun protection roller blind for side window, Driver's door, Spray mist reduction, Stabilizer bar on one rear axle, Stabilizer bar front axle, Storage box accessible from outside, Control unit type cab, Tinted door windows, Rear underride guard, Front underride guard, Visco fan, Central locking, Perm. Gross vehicle weight 26.00 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING On request, we will be happy to make you a LEASING-MIET BUY or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-PRÜFUNG / tacho check / installation of OBU device and service by our MARKENWERKSTATT on site TOLL / ROAD CHARGES Tolls can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt airport 150 KM away Frankfurt-Hahn airport 40 KM away Luxembourg airport 75 KM away Sale according to our AGBs. The details on the Internet are non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oe

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC Delem DA-58T Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Ljdogih Iuspfx Ab Asru Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, mileage: 567,086 km, power: 235 kW (319.51 HP), first registration: 07/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, emission class: euro4, Equipment: ABS, Tel.: Call (Contact · Phone · Mobile · WhatsApp) Special Equipment: Tow hitch: Rockinger 400 G 150 A, Car phone antenna, Mechanical battery disconnect switch, Operating hour counter, Comfortshift transmission, Rear axle differential lock, Air horns on cab roof (2), Cab: Electro-hydraulic tilting mechanism, Cab: with 2 tinted rear windows, Flame start system, Tinted windshield, Tipper lever – brake system regulated by EVBec, Tinted side windows, Seat upholstery: comfort quality, Exterior sun visor, 24V dual-plug cab socket, 3-piece steel bumper, Tinted door glasses, Front underrun protection, Viscous fan Additional Equipment: Axle configuration: 4x2, Front axle load 8.0 t, Start-up/front mirror, 24V / 7-pin trailer socket, ABS trailer socket, Anti-Slip Regulation (ASR), Electrically adjustable and heated exterior mirrors, Wide-angle and electrically adjustable/heated exterior mirror (right), 175 Ah battery, Battery box, MAN-Tronic on-board computer, Right curb mirror, MAN-Brakematic electronic brake system, EURO 4 engine, Cab: M (medium length), Comfort driver’s seat, Tachograph, Suspension: leaf/air, Electric window regulators, 28 V 80 A alternator, Speed limiter system 80/85 km/h, 16-speed gearbox – type: ZF 16 S, Rear axle HY-1350, Interior pollen filter, Body/structure: chassis, Heated fuel filter, Adjustable steering column/wheel, Headlight range adjustment, 2-cylinder air compressor, Engine 10.5 L – 235 kW diesel, Radio pre-wiring 24V, Rear axle disc brake, Front axle disc brake, Side underrun protection, Front axle stabilizer, Tow hitch cross member, Rear underrun protection, Cranked front axle VOK-08, Electronic immobilizer, Central locking, Permissible gross weight 18.00 t * VIN: WMAH06ZZ67M484009 * First registration: 19.07.2007 * Price net * All information without guarantee Lrodpfeta I Siex Ab Aju

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site Lredjtizavepfx Ab Aou

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs Lrederp Dwaepfx Ab Aju - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for simulation and processing - 17″ high-resolution TFT colour screen - Full Windows operating system - Compatibility with Delem Modusys system (modular scalability and adaptability) - External USB port - Detailed user support in a multitasking environment - Bending using the sensors in this menu for parameter adjustment - Profile-T3D offline software Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Manufactured in Turkey Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: not inspected (used), Year of construction: 1995, functionality: fully functional, Lisec sealing robot for second seal type VL-1/25-2, for maximum unit size 3500 x 2500 mm, running direction right to left, consisting of following: Lrsdpfx Aborrvkbo Asu RTV-11/25VE, inlet conveyor with width measuring device for glass and frame thickness VL-1/25-2, sealing robot for double glazing units DOS-1TH, 2k metering station for Thiokol The machine will be completed and tested in simulation mode prior delivery