Used Helium Leak Detector for sale (924)

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 20.000 Liters Diameter: ca. 2.000 mm Bsdpfx Aajhui Ipj Dedb Length: ca. 6.840 mm Weight: ca. 4.000 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 40.000 Liters Diameter: ca. 2.500 mm Length: ca. 8.720 mm Weight: ca. 7.800 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Bsdpfx Aehui Hcoa Dsdb Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: defective spare-parts repository (used), Year of construction: 2005, operating hours: 38,534 h, functionality: not functional, machine/vehicle number: 29310001024, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 560 mm Worktable size: 950 x 650 mm Table load: 1,000 kg Spindle speed: 18,000 rpm Number of axes: 3 Tool changer: 30 positions Tool holder: HSK63 MACHINE DETAILS CNC control: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Transport dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Weight: 10.2 t Operating hours Bdjdpfxjy Ib H Io Aa Dsb Spindle hours: 38,534 h Operating hours: 98,381 h Note: DMG has measured the clamping force on the machine, which is so low that there is a risk of the tool falling out. The machine has suffered spindle damage. There are various leaks, for example at the chip conveyor or in the door area.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) Bodpfxoy Iczto Aa Dsdb • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. Bodpfxjy Ia Tte Aa Djdb The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: excellent (used), CTS Climate Test Chamber C-70/1000-S Device Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Type: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Data Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Cooling System Refrigerants: R404A / R23 Bdodpfx Aasy Iam Hj Dob Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features CTS control unit with LCD display Programmable operation Digital setpoint/actual value display Viewing window in door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Cable ports on the sides Feedthroughs approx. 50 mm and approx. 125 mm RS232 interface as per documentation Digital outputs for test specimen control Mobile design on castors Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation size (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating manual Error messages and digital channels Site plan Quick guide Humidity diagram Scope of Delivery CTS Climate Test Chamber C-70/1000-S Documentation as available Scope of delivery as shown Optional Pre-delivery Service Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as per photos. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized on request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Condition: used, Year of construction: 2001, 2001 | Liebherr L 524 | Used Wheel Loader 📍Location: France Bsdpfoy H Scqsx Aa Djdb 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 41 approved ✅ 16 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Average condition, anticipate tire axle hydraulic leak repair. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40727 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), ESPEC Climate Test Chamber ARS-0680-AE Device Data Manufacturer: ESPEC Model: ARS-0680-AE Year of manufacture: 2017 Type: Climate test chamber Cooling: air-cooled Description Bdsdpfx Ajy H H Uhoa Djb Used climate test chamber by ESPEC. Suitable for temperature and humidity testing. Ideal for use in research, development, and quality assurance. Operating Condition Status display: STOP (ready for operation). Operating hours: approx. 5,887 hours. Technical Data Temperature range: approx. -45 °C to +180 °C Humidity range: approx. 10 – 98% RH Temperature change rate: approx. 4–6 K/min Test chamber volume: approx. 680 liters Dimensions Interior (W x H x D): approx. 850 x 1000 x 800 mm Exterior (W x H x D): approx. 1050 x 1955 x 1805 mm Electrical Data 400 V / 3~ / 50 Hz Current consumption: approx. 22–27 A Cooling System Refrigerants: R23 / R452A R23: 0.65 kg (GWP 14800) R452A: 2.1 kg (GWP 3920) Air-cooled (no external water connection required) Weight Approx. 505–615 kg Features Touchscreen control panel Program operation and constant operation Viewing window Stainless steel test chamber Interior lighting Cable ports Water tank system for humidity operation Mobile (castors and leveling feet) Scope of Delivery ESPEC climate test chamber ARS-0680-AE Documentation (if available) Service before delivery (optional) Function check Refrigerant service Leak test Trial run with log Condition Used. Condition as shown in the pictures. Note Used equipment, sold without warranty. Inspection by appointment possible. Loading and transportation can be organized on request. Subject to prior sale and changes. Please contact us if you have any questions.

Condition: excellent (used), Binder Climate Test Chamber MKFT 720 E3.2 Device Information Manufacturer: Binder Model: MKFT 720 E3.2 Year of Manufacture: 2017 Item Number: 9020-0288 Design: Climate Test Chamber (Change-over type) Cooling: Air-cooled Description Used Binder climate test chamber. Suitable for temperature, climate, material, and aging tests, as well as stress tests. Intended for applications in industry, research, development, and quality assurance. Technical Specifications Temperature Range: -70 °C to +180 °C Humidity Range: 10% to 98% RH Internal Volume: approx. 734 liters Max. Total Load: 160 kg Max. Load per Shelf: 40 kg Dimensions External (W x H x D): 1615 x 2005 x 1230 mm Internal (W x H x D): 1200 x 1020 x 600 mm Electrical Data 400 V / 3N~ / 50 Hz Power: 13.0 kW Current: 22.5 A Protection Class: IP 20 Refrigeration System Refrigerant: R404A / R23 Stage 1: 4.00 kg Stage 2: 0.87 kg Two-stage refrigeration system Max. Operating Pressure: 29 bar Performance Data - Temperature Temporal temperature deviation: 0.1 to 0.5 K Spatial temperature deviation: 0.3 to 2.0 K Heating rate: approx. 4.8 K/min Cooling rate: approx. 4.0 K/min Heat compensation: approx. 5000 W Performance Data - Climate Climatic range: +10 °C to +95 °C Humidity range: 10% to 98% RH Temperature deviation: 0.1 to 1.0 K Heat compensation: approx. 800 W Features Touch control panel Programmable and constant operation modes Observation window Stainless steel test chamber Interior lighting Cable port Mobile on castors Robust industrial design Weight Approx. 635 kg Bedpjy H H Smefx Aa Dedb Scope of Delivery Binder climate test chamber MKFT 720 E3.2 Scope of delivery as shown Service prior to delivery (optional) Functional test Refrigeration service Leak test Test run with protocol Condition Used. Condition as per images. Note Used equipment, sold without warranty. Inspection by appointment possible. Loading and transport can be arranged on request. Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: excellent (used), ESPEC Climate Test Chamber PL-3KPH Bdedpfx Aasy H H Ius Dsb Device Data Manufacturer: ESPEC Model: PL-3KPH Design: Climate Test Chamber Cooling: Air-cooled Description Used climate test chamber from ESPEC. Suitable for temperature and humidity testing. For use in research, development, and quality assurance. Operating Condition Display: STOP / ready for operation. Technical Data Temperature range: -40°C to +180°C Humidity range: 20% to 98% RH Test chamber volume: approx. 400 liters Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A / R23 Two-stage cooling system Air-cooled (no external water connection required) Weight Approx. 350 kg Equipment Touchscreen control panel Programmable and constant mode operation BTHC temperature and humidity control Observation window Stainless steel test chamber Internal lighting Cable port Overheating protection Hour counter Industrial design Scope of Delivery ESPEC Climate Test Chamber PL-3KPH Scope of delivery as shown Service before delivery (optional) Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in photos. Note Used device, sale without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: excellent (used), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Type: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. Designed for use in research, development, and quality assurance. Operating Status Display: Manual operation / Stop. Temperature: 16.59 °C (actual) / 5.00 °C (set). Humidity: 39.7 % RH. Water reserve: 11.0 liters. Technical Specifications Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration unit Low temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Features Viewing window Stainless steel test chamber Digital set/actual value display Sample protection / temperature limiter Water connection (deionized water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight approx. 600 kg Bedpfxjy H H D Ao Aa Dsdb Scope of Delivery CTS Climate Test Chamber C-70/600 Documentation (if available) Pre-delivery service (optional) Functional testing Refrigerant service Leak testing Trial run with protocol Condition Used. Condition as shown in the images. Note Used equipment, sale without warranty. Inspection possible by appointment. Loading and transport can be arranged on request. Subject to prior sale and modifications. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature, climate, and stress screening tests. For use in industry, research, and quality assurance. Operating Condition Display: Manual mode / Warning (Drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Compressor pre-cooling: 11,432 h Pump circulation: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber CTS touch/LCD control panel Programmable operation Specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refilling possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial version Feedthroughs 1x NW 50 2x NW 125 Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1120 x 1875 mm Weight Approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / Test certificates (if available) Pre-shipment Service (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Visual condition see pictures. Bjdpfx Aaoy H Hmwj Dodb Note Used equipment, sale without warranty. Inspection by arrangement possible. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. Intended applications include industry, research, and quality assurance. Technical Specifications Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Cooling System Refrigerants: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber Digital setpoint/actual value display Test specimen protection / Temperature limiter Water connection (deionized water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Bedpfx Aasy H Hl He Dedb Weight Approx. 600 kg Scope of Delivery CTS Climate Test Chamber C-70/600 Documentation (as available) Service prior to delivery (optional): - Functional check - Refrigerant service - Leak test - Test run with protocol Condition Used. Visual condition as shown in the images. Note Used equipment, sold without warranty. Inspection by appointment possible. Loading and transportation can be organized upon request. Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: used, mileage: 425,825 km, power: 315 kW (428.28 HP), first registration: 09/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, gearing type: automatic, emission class: euro6, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Mercedes Benz SZM 1843 Arocs First registration: 09/2013 Mileage: 425,825 km, 10,049 hours according to odometer Powered by diesel engine with 315 kW / 428 HP, Euro VI Automatic transmission Driver’s cab with 2 seats and 2 sleeping berths Bdodpfx Aoyxiuhea Dob Tyre size: 315/80 R 22.5, tread depth 5-13 mm Wheelbase: 3,550 mm Overall dimensions (L x W x H): 6,250 x 2,550 x 3,900 mm Unladen weight: 7,435 kg, axle loads: 7,500 kg, 11,500 kg Air conditioning, ABS, radio, auxiliary heater, cruise control, beacon, differential lock, power steering, electric windows, adjustable steering wheel, refrigerator, wheel chocks Hydraulic tank leaking More details and further photos available on request. This description does not constitute a binding offer and may contain errors; no warranty on all information provided. Please also visit our homepage.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Bdsdpfx Asu Thhrsa Djb Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Bdsdpfx Aox A U Ncsa Djb Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Technical design: - Warm and cold chamber separated Bdjdsy Hkgbepfx Aa Dsb - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Climate Test Chamber Type: CS-70/1000-5 Water-cooled condenser Year of manufacture: 08/2018 For sale is a high-quality climate and temperature test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is designed for the simulation of various environmental conditions and is typically used in industrial, research, and quality assurance settings. It allows for precise testing under extreme temperature and humidity conditions, such as: - Material testing - Aging tests - Electronics and component testing - Climate and environmental simulations Thanks to its large test chamber (1000 liters) and high-performance control system, it supports both rapid temperature changes and constant long-term tests. The system is water-cooled, ensuring stable and efficient operation. Technical data: Model: CS-70/1000-5 Test space volume: approx. 1000 liters Control system: - Multi-touch controller with integrated program generator - Programmable test sequences Side pipe / cable ports: - 1x port NW 50 - 1x port NW 125 Temperature range: - –70 °C to +180 °C - Change rate: up to 5 K/min - Temperature stability: ±0.3 K Climatic data (humidity): - Humidity range: 10% to 98% r. h. - Dew point range: –10 °C to +94 °C Dimensions: - External (HxWxD): approx. 1950 × 1270 × 2245 mm - Internal (HxWxD): approx. 900 × 1000 × 1100 mm Electrical data: - Connection: 400 V / 3/N / 50 Hz - Power: 17.6 kW - Rated current: 28.5 A Refrigeration system: - R452A – 5.1 kg – GWP 2140 - R23 – 2.1 kg – GWP 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar - Protection rating: IP 22 Weight: approx. 900 kg For your safety as a buyer, please note the following: The following procedures are carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. Documented test run Condition: used The unit can be fully inspected as depicted in the photos. Display: STOP / manual mode Scope of delivery: - CTS climate test chamber CS-70/1000-5 - Delivery as shown in the photos Bodpjy Hkc Aofx Aa Djdb Inspection by appointment is possible. Loading by forklift can be organized. (Subject to changes and errors in technical data!) We are happy to answer any further questions by phone.

Condition: excellent (used), ESPEC Climate Test Chamber Type: ARS-0680-AE ESPEC Climate Test Chamber / Environmental Simulation Chamber Rate of Change: up to approx. 5 K/min Model: ARS-0680-AE Year of Manufacture: 2018 For sale is a high-quality ESPEC climate test chamber for precise temperature and humidity testing in research, development, quality assurance, and industry. The unit is in used condition and can be fully inspected as shown in the images. Bsdpey Hkb Sefx Aa Dodb The current display reads STOP / Ready for operation. Operating hours (according to display): approx. 6,950 hrs. Technical Data: Model: ARS-0680-AE Test chamber volume: approx. 680 liters Temperature range (typical for ARS-Series): approx. -70 °C to +180 °C Humidity control: available Rate of change: up to approx. 5 K/min Internal dimensions (W x H x D): 850 × 1000 × 800 mm External dimensions (W x H x D): 1050 × 1955 × 1805 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current consumption: 27 A Weight: approx. 615 kg Year of manufacture: 2018 Cooling: air-cooled (no external water connection required) Refrigerants according to nameplate: R452A – 2.3 kg – GWP 2141 R23 – 0.65 kg – GWP 14800 Features / Equipment: Touchscreen control panel Programmable operation and constant operation modes Observation window in the door Stainless steel test chamber Chamber lamp / interior lighting Side ports for pipe and cable entry Ethernet interface Specimen temperature input Power supply control for specimen Time signal outputs Water tank system for humidity control Mobile/caster-mounted design Weight: approx. 615 kg For your safety as the buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If necessary, new refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Scope of Delivery: ESPEC Climate Test Chamber ARS-0680-AE incl. available documentation Scope of delivery as shown in the images Condition & Notes: Condition: used Inspection possible by prior arrangement. Loading by forklift can be arranged. (Subject to change, prior sale, and errors in technical data!) If you have any questions, please feel free to contact us.

Condition: excellent (used), CTS Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, suitable for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industry. The unit is in used condition and can be inspected in detail as shown in the images. Current display: manual operation / stop. Operating hours according to display: Technical Data: - Temperature range: -70 °C to +180 °C - Humidity range: 10% to 98% RH - Dew point range: -10 °C to +94 °C - Test chamber volume: 600 liters - Temperature change rate according to IEC 60068-3-5: - Heating: 6.0 K/min - Cooling: 7.0 K/min - Electrical connection: 400 V 3/N 50 Hz - Nominal power: 14.6 kW - Nominal current: 22.0 A - Protection class: IP 22 - Refrigerants: R404A / R23 - Pre-cooling stage: R404A – 4.5 kg - Cooling stage: R23 – 2.1 kg / 14.5 bar - CO2 equivalent: 17.65 t / 31.08 t - GWP: 3922 / 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar Features / Equipment: - Observation window in the door - Stainless steel test chamber - LED test chamber lighting - CTS LCD control panel with digital controller - Test specimen protection / temperature limiter - Water-cooled refrigeration unit - Automatic water top-up / deionized water inlet - Test chamber and condensate drain - Volt-free contact - Digital outputs - RS232 interface - Ethernet interface - Lateral cable ports Cable ports according to installation plan: - 1x port NW 50 - 2x port NW 125 Test chamber dimensions according to installation plan: - approx. 850 x 850 x 830 mm External dimensions according to installation plan: - approx. 1900 x 1120 x 1875 mm Bdjdpfxsy Hkble Aa Dob Weight / Mass according to documentation: approx. 750 kg Scope of delivery: - CTS climate test chamber CS-70/600-5 - Including available documentation / test certificates - Delivery includes everything shown in the images Buyer assurance: - The unit can be viewed by appointment. - Loading by forklift can be arranged. - For any questions, please do not hesitate to contact us. Buyer safety information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used (Changes and errors in the technical data reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: C-70/600 CTS Climate Test Chamber C-70/600 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, suitable for precise temperature and climate testing in research, development, quality assurance, and industry. Bjdpfxoy Hkazo Aa Dsdb The equipment is in used condition and can be inspected fully as per the images provided. Current display shows manual operation / stop, actual temperature 16.59 °C, setpoint 5.00 °C, actual humidity 39.7% r.h., and water reservoir actual value 11.0 l. Technical Data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Nominal power: 8.7 kW Nominal current: 14.8 A Protection class: IP 22 Refrigerants: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration unit for low temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Specifications: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Specimen protection / temperature limiter Water connection / deionized water inlet Test chamber and condensate drain Tubing ports on the side of the chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions (as per documentation): approx. 850 x 850 x 830 mm External dimensions (as per documentation): approx. 1900 x 1115 x 1850 mm Weight (as per documentation): approx. 600 kg Scope of delivery: CTS Climate Test Chamber C-70/600 including available documentation / operating manuals Scope of delivery as shown in the images For your safety as the buyer: The equipment can be inspected by appointment. Forklift loading can be arranged. Additional assurance for you as a buyer: The following measures are undertaken on all chambers offered: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Subject to changes and errors in technical specifications and details!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2010, operating hours: 2,300 h, For sale: Caterpillar TH514 telehandler. It offers significantly higher lifting capacity compared to popular 3.5–4 t models, making it an ideal choice for heavier-duty work. The machine is ready to work with no additional investment required. Key information: Year: 2010 Hours: approx. 2300 mth (still in use) First owner Engine: Cat C4.4 DITAAC – 74.5 kW / approx. 101 HP Gross weight: 11,180 kg Performance: Max lifting capacity: 4,990 kg Transmission: PowerShift (4 forward / 3 reverse) 3 steering modes: crab, 4-wheel steering, front-wheel steering Working lights Technical condition: Machine in excellent condition – dry, tight, no leaks Original paint (only stabilizers and first boom section refreshed) Bdsdey Iutnopfx Aa Dob Equipment: Forks on euro carriage Hydraulic quick coupler (Quick Coupler) Auxiliary hydraulics (3rd and 4th function AUX) إمكانية podłączenia platformy roboczej → Ability to connect a work platform Hydraulic self-leveling Cab & comfort: Air conditioning Air suspension seat Radio installation + speakers On-board computer with hydraulic flow control (Auxiliary Flow Control) TAG: telehandler, telescopic handler, Caterpillar, Cat TH514, forklift, construction equipment, heavy machinery, loader, 5 ton telehandler, Manitou, JCB, Merlo, Dieci, Bobcat, Claas, New Holland, Genie, SkyTrak, low hours, used telehandler

Condition: used, Year of construction: 2001, The KBA RAPIDA 162A 6+lak PWVA ALV3, manufactured in 2001, is currently dismantled and located in Germany. With a format of 1200 x 1620 mm and a print count of 258 million, this machine is equipped with a range of features including Densitronic S for density and spectral measurements, an Anilox Coater with a chambered doctor blade and UV coating, extended delivery, a semi-automatic plate changing system, and the capability to use hybrid conventional or hybrid inks. It also includes manuals and tools, automatic roller washers, WEKO powder spray, non-stop feeder and delivery, a TRESU coating supply and cleaning device, an ultrasonic double sheet detector, circumferential and diagonal remote register control, automatic blanket washers, wash and print functionality, antistatic features, a Remote Ergotronic with Colortronic Console, an air cleaning system, an Eltosch Dryer with two UV dryers and three interdecks, IR/UV in delivery, ACR Autoregister, a Varidamp Alcohol Dampening System, automatic ink roller washers, Baldwin refrigeration and recirculation, and ink temperature control. The delivery terms are FCA. Format: 1200 x 1620 mm Equipment: Semi-automatic plate changing system Non-stop feeder and delivery Remote Ergotronic w/ Colortronic Console Circumferential & Diagonal Remote Register Control Hybrid Conventional or Hybrid Inks Ultrasonic Double sheet Detector Varidamp Alcohol Dampening System Baldwin Refrigeration & Recirculation Bdodpfx Asvfx Ewea Dob Automatic blanket washers Automatic roller washers Automatic Ink Roller Washers Densitronic S (Density & Spectral) Ink Temperature Control Anilox Coater w/ Chambered Doctor Blade & UV Coating TRESU Coating Supply & Cleaning Device Eltosch Dryer (2 UV Dryers with 3 Interdecks, IR/UV in Delivery) Wash & Print Extended delivery Air cleaning system Anti-static device WEKO Powder Spray ACR Autoregister Manuals & Tools

Condition: used, Year of construction: 2005, The Sakurai 466 SIP, manufactured in 2005 and bearing serial number HF113105, is a four-color offset press with a maximum sheet size of 470 x 660 mm and a total of 25 million impressions. Currently in operation at a printshop in Germany, this press is equipped with the DTC Delivery Top Console featuring a touch screen and full remote-control operation. It incorporates advanced automation systems such as SIS (Sakurai Interactive System) for make-ready, SAS (Sakurai Auto Set) for paper size and thickness adjustment, and SPC (semi-automatic plate change), along with a plate running register system and cocking register for precise alignment. Bodpfxjxa Eamo Aa Dsdb The press is fitted with automatic washers for blanket cylinders and inking rollers, Olivermatic dampening, and a Baldwin refrigeration and Bal Control system to ensure consistent print quality. Its feeder includes a suction-belt feed table with electronic double sheet and side lay detectors, while the chromed impression cylinders enhance durability and performance. The machine also features a perfector for 4/0 or 2/2 printing with full automation, semi-high pile delivery, and a powder spray system. Included with the press are a plate punch, compressor, tools, and manuals, making this Sakurai 466 SIP a complete and well-equipped solution for high-quality, efficient offset production. Format: 470 x 660 mm Equipment: Console DTC (Sakurai Delivery Top Console) with Touch Screen. Full Remote Control Operation : SIS (Sakurai Inter Active System) for make ready Plate Running Register system SAS (Sakurai Auto Set) for Paper size and thickness SPC (Semi-automatic Plate Change) Cocking Register Automatic Washers: Blanket Cylinders & Inking Rollers Olivermatic Dampening Baldwin Refrigeration System & Bal Control Feeder with Suction-belt feed table Electronic Double Sheet & Side lay Detector Chromed Impression Cylinders Perfector 4/0 - 2/2 (Full automatic) Semi-High Pile delivery Powder Spray Including: Plate Punch, Compressor Tools and Manuals

Condition: used, maximum load weight: 12,000 kg, overall weight: 16,000 kg, first registration: 01/2009, loading space length: 8,690 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,590 mm, total height: 2,750 mm, Year of construction: 2009, Vehicle No. G0106558_1 - Manufacturer: Krone. * Floor: Aluminum floor * Simple corner fittings * Electrical cable for refrigeration unit * Rear door design: Rear portal doors * Refrigeration unit * Portal door with simple espagnolette locks (external) * Support legs fixed * Locking bars on rear doors: 2 * Tie-down rails New leak test. Rear portal/portal door with simple espagnolette locks/external made of stainless steel. Storage container wind and weatherproof, lockable, floor in good condition, no further repairs. Delivery time: IMMEDIATELY. Technically ready for use without further repairs. Test run down to -18°C OK! Substructure with signs of wear. UVV applicable. Mobile refrigerated storage unit. Bjdpfx Aaey E Id Uo Dedb Dimensions are approximate. Offer subject to change without notice and prior sale. Prices net ex location, D-59302 Oelde. Further details are available by phone or email: