Used Halm Grid Resistance, U03 for sale (3,467)

Condition: good (used), Year of construction: 2013, 1 used robotic welding system Manufacturer: Yaskawa with 2 robots, WIG AC and DC welding systems from EWM, spot welding tongs from Dalex, and 2 swiveling fixture systems Year of manufacture: 2013 Suitable for welding housings made of steel, stainless steel, or aluminum Technical specifications: Robotic welding system – specification / equipment Robotic welding system Dimensions W x D x H: 16,000 x 6,000 x 2,500 mm - S7 control for the fixture Double welding cell with 2 maintenance doors and 2 loading stations - opaque enclosure Robots / Positioners 2 Motoman 6-axis welding robots 1 x 50 kg version 1 x 165 kg version - extended design 2 x bases 1 x control unit with DX operating panel - Master - Slave 1 x mobile base with 2 parking stations 2 stations - rotary tables with integrated pneumatics for "clamp on" function Gbjdpez Aac Uefx Ak Uet Centrally programmable in sync via 1 robot controller Media connections for compressed air and electrical signals in the positioner Design and construction of a base frame for part holding Welding and clamping table S 4 3,000 x 1,500 mm with tool set 2 Digital I/O card for welding equipment EWM WIG welding system Tetrix 422 DC - RC Item no.: 520000050019 For automated and robotic applications Inverter DC welding machine Standard interfaces for automation (start/stop, pilot voltage, current flow), optional interfaces TETRIX RINTX11, industrial bus interface TETRIX BUSINTX11, documentation interface PCINT X10 (+ software Q-DOC 9000), and monitoring and documentation system WELDQAS Controllable parameters with interfaces: 256 jobs (welding tasks) with 16 programs each in program mode, as well as wire feed speed, correction of arc length and arc dynamics via pilot voltages, etc. Connection options: remote control, optional interfaces for automation, documentation, and PC connection Output 5 - 420 amps 420 amps 60% duty cycle - 40 °C 360 amps 100% duty cycle - 40 °C Mains connection 400 volts (-25% / +20%) Dimensions 654 x 576 x 374 mm Additional cost for AC/DC version – 1 unit EWM WIG cold wire feeder Tetrix Drive ROB Item no.: 520000040018 Quantity: 2 units Lightweight, compact wire feeder for mounting on a robot or fixture 4-roll drive Water cooling connection Control with digital incremental encoder Push Pull capable Separate button for wire retraction, gas test, and wire threading Setting and saving parameters centrally via the welding system control Wire feed speed 0.1 to 5 m/min Wire feed steps 0.01 m/min Weight 6.5 kg Dimensions 345 x 230 x 250 mm Left-opening design ABITIG WH torch system Swivel neck technology Push Pull drive for precise wire feed Water-cooled Output 400 amps Torch holder and changing station with pneumatic locking Design and construction of a part holder for an aluminum rear panel Resistance welding equipment / other components Resistance welding equipment for robots consisting of: - Medium-frequency inverter power source - Transformer with 250 kVA rated power - X-welding tongs High-performance water cooler Design and engineering Documentation such as machine design and parts lists in a simple format in German CE declaration Welding fume extraction system with piping

Condition: like new (used), Year of construction: 2020, functionality: fully functional, We present a fully automated fiber laser cutting system with integrated storage, robotic handling, and high-speed precision performance, designed for industrial production environments. KIMLA POWERCUT LF1530 Fiber Laser Cutting System (Fully Automated Line) Model: KIMLA POWERCUT LF1530 Manufacturer: KIMLA Year of manufacture: 2020 Compliance: CE certified Control system: Full CNC digital control Technical Specifications Installation length 12,500 mm Installation width 7,200 mm Installation height 3,000 mm Nominal sheet size (X axis) 3000 mm Nominal sheet size (Y axis) 1500 mm Cutting area X axis 3050 mm Cutting area Y axis 1550 mm Cutting area Z axis 120 mm Max positioning speed (all axes) 230 m/min Max positioning speed (X/Y axes) 230 m/min Max positioning speed (Z axis) 70 m/min Acceleration (X/Y axes) 6G Repeatability 0.001 mm Positioning accuracy 0.002 mm Max workpiece weight 900 kg Gbodpfx Aey Nwtyjk Ust Laser source Fiber laser, 4000 W (IPG) Pulse frequency ±1–2500 Hz Total power consumption (excluding extraction & chiller) 30 kW Drive system Linear drives on all axes Optical linear encoders Yes Part measurement/scanning system RENISHAW or equivalent, inductive Automatic sheet loading/unloading & storage system Integrated, 12 positions, 2000 kg each Shuttle tables Yes, 3 Table exchange speed 1 m/s Tube cutting option Yes, on third pallet Dynamic motion control (trajectory optimization) Yes Robotic part handling system Yes, robotic arm with full integration Documentation English CE compliance Yes Control system Digital (CNC) Spare parts and tools Yes

Condition: excellent (used), Year of construction: 2021, Engel Victory 2460/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Injection Molding Machine / Operating hours: approx. 10,000 h in automatic mode Year of manufacture: 2021 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1,100 g Injection pressure: 2,000 bar Dosing volume: 1,212 cc Clamping unit: Clamping force: 260 t Tie bar distance: 0x0 mm Platen size: 1,100 x 1,000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 – Touchscreen Additional equipment: Production line with Engel Viper 20 robot Machine in perfect technical condition Tie-barless hybrid machine: energy-efficient and very quiet Operating hours: approx. 10,000 in automatic mode Air valves x 5 Hydraulic core pull x 2 on the moving platen side Hydraulic core pull x 2 on the fixed platen side Injection unit is wear-resistant and corrosion-resistant Main drive of the machine: servo motor with inverter – energy saving Proportional valve on the injection unit – precise injection Kistler sensor – mold pressure control Engel Viper 20 Robot Year of manufacture: 2021 6-axis robot: all 6 axes driven by electric servo motors: X, Y, Z, B, C Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 7.35 x 2.06 x 2.37 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Gbjdpfjzy Itcex Ak Uet Price: On request

Condition: excellent (used), Year of construction: 2008, CNC machining center Record 240 NT Year of manufacture: 2008 Gbsdpfx Aezx R Rzjk Uot

Condition: used, Year of construction: 2007, total height: 2,500 mm, total length: 11,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 7.200 kg Price: On request - Machine available from: 2026-06-24 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 97649 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 1000 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 9 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 18.5 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: No - Tool changer positions [pcs.]: 22 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 250 - └ Year of manufacture: 2007 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - Tools included: No - CNC options: EPS system, Offcut conveyor, Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 6200 - Table width [mm]: 1320 - Working range X [mm]: 6200 - Working range Y [mm]: 1535 - Z-axis working range [mm]: 275 - X-axis maximum stroke [mm]: 6820 - Y-axis maximum stroke [mm]: 1963 - Transport dimensions: 11000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gbsdpfx Akey Ipnto Uet Yorick Diebels

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Gsdpfx Astwgirjk Ujbt Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 3,350 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 180 mm, number of axes: 3, spindle motor power: 5,600 W, spindle speed (max.): 18,000 rpm, This 3-axis COMEC MD TOP XL CNC Wood Machining Centre was manufactured in 2020. It features a robust mono-block structure, high-speed axes positioning up to 70 m/min, and versatile electro-spindles for drilling, milling, and cutting. The machine includes a CAD-CAM control unit with a 17" touchscreen and full safety enclosures. If you are looking to get high-quality woodworking capabilities, consider the COMEC MD TOP XL machine we have for sale. Contact us for more information. • Machine frame: Heavy-duty mono-block structure in electro-welded steel • Spindles: • Vertical electro-spindles: 3 • Drilling spindle • Power: 1.7 kW • Speed: 4350 rpm • Point-to-point drilling head: • 5 vertical drilling spindles (32 mm spacing) • 3 double-exit horizontal spindles along Y-axis (32 mm) • 3 double-exit horizontal spindles along X-axis (32 mm) • Milling/mortising spindle • Power: 7.0 kW • Speed range: 12,000–18,000 rpm • Cutting/milling/drilling spindle • Power: 7.0 kW • Speed range: 8,000–18,000 rpm • Multi-function aggregate included • Horizontal electro-spindle: • Type: Milling/mortising spindle • Power: 5.6 kW • Speed: 12,000–18,000 rpm • Tool holder: ER32 collet • Working area: • Nominal strokes: X 3350 mm, Y 200 mm, Z 180 mm • Two working fields: 2 × 1500 mm • Axes positioning speed: up to 70 m/min • Interpolation: Linear and circular on X/Y/Z (3 axes CN-controlled) • Workpiece support tables: • 4 + 4 tables on adjustable slides • Each table with 4 + 4 vertical pneumatic clamping cylinders • Frontal and lateral reference stops • Control system: • CAD-CAM control unit • Stand-alone electrical cabinet • Industrial PC with 17" touchscreen • Connectivity: Ethernet, USB, RS232 • Software: Supports NC CAM Suite TPAED132 • Safety and enclosure: • Full perimeter safety cabin • Automatic synchronized front safety door • Polycarbonate panels and safety interlocks • Power and standards: • Supply voltage: 400 V / 50 Hz • CE safety compliance Gsdpszug Hkjfx Ak Uobt

Condition: used, Year of construction: 2015, - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm CNC nesting machine Manufacturer: Homag Type: BMG511/60/12/R Year of manufacture: 2015 Technical data - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm Workpiece parameters: Length with single workpiece loading: 6,000 mm / with pendulum machining 1,550 - 3,200 mm Widths: Max. 1,550 mm with stop at the rear and milling diameter 25 mm Workpiece thickness 275 mm including clamping device Up to max. 60 mm with standard clamping device Speed Pack: Increase in the max. travel speed of the X-axis to 80 m/min. Gsdpfszux Tcsx Ak Uebt With tool transfer station, on the left side of the machine bed Rotary tool changer, 18 positions Option for 18 x 130 mm tool diameter or 9 x 180 + 9 x 70 mm. Aggregate length max. 320 mm Machining spindle 12 kW (12 kW in S6 operation, 9.5 kW in S1 operation) Frequency-controlled rotation 0 - 24,000 rpm. C-axis with aggregate interface Drive for all aggregates with pivoting axis, pivoting range without limitation. Interface for FLEX-5 aggregate Drilling head, 30 spindles: V20 / H10 / S360 MPU Multi-Processing Unit with C-axis +/- 185 for drilling and sawing operations at any angle. 20 vertical spindles in HIGH SPEED. Each drilling spindle with a quick-change system. Arrangement of spindles in a U-shape: 3 drilling rows with 11, 3 and 6 spindles, spindle spacing 32 mm 10 horizontal drilling spindles. 4 drilling spindle pairs with a spacing of 32 mm 1 drilling spindle pair spacing 320 mm Grooving and cut-off saw for max. saw blade diameter 200 mm. Basic design, slatted table: Slatted table with grooved aluminum profile Dynamic workpiece positioning on R-table The machine automatically checks the maximum possible part dimension based on the program layout. The vacuum areas are permanently assigned to the machining areas. Machine control POWERCONTROL PC 86 POWERTOUCH with 21.5 Full-HD multi-touch display WoodWop for graphical, dialog-oriented creation of CNC programs. The machine is supplied via an on-site vacuum system. Without its own vacuum pump.

Condition: used, Year of construction: 2012, Nesting machining center with automatic unloading PC-based numerical control - ALPHCAM user interface software + Alphacam Nesting software X-axis work range: 4200 mm Y-axis work range: 2100 mm Nesting work table One 3-axis vertical electrospindle, 9 kW, with automatic tool changer, HSK F63 type cones Automatic tool changer with 6 positions DH 17 drilling head with 17 vertical spindles Automatic unloading system with motorized conveyor Adhesive label printing and application system with labeler Protection and safety system with perimeter grilles Safety system with front safety mats Automatic lubrication system Air conditioning system for cooling and cleaning the machine control Three 250 m3/h vacuum pumps TECHNICAL DETAILS TO BE VERIFIED Gbedpfx Aswc Uwiok Uet

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 56535, Double-face circular knitting machine with electronic needle selection, Mayer & Cie. model OVJA 1.6 E, machine number 56535, year 2004. Manufactured in Germany and CE marked on the nameplate. NAMEPLATE DATA: Nominal diameter: 660 mm / 26 inches · Gauge: 20 E · Pitch: 1.27 mm · Number of needles: 1638 · Operating voltage: 380 V · Control voltage: 24 V · Frequency: 50 Hz · Power: 4.0 kW · Electrical diagram number: 191353.2 APPLICATION: Double-face knitted fabric with electronic jacquard: fabrics for mattresses, quilts, cushion covers, and outerwear. EQUIPMENT: Mayer & Cie. control cabinet with display and programming keyboard · Main switch and start/stop push-button panel · Complete perimeter guards · Official Mayer & Cie. service sticker on the cabinet Gbsdpfx Akezvht Ij Uot CONDITION: Complete machine, assembled and not disassembled. Fabric remains in the machine from the last production run. An inspection visit and on-site operational test can be arranged. DIMENSIONS AND TRANSPORT (approximate): Length 2.70 m · Width 2.00 m · Height 2.70 m · No need to disassemble it to move it out of the building · Location: Albacete, Spain IMPORTANT NOTE FOR EXPORT: The electrical panel indicates 50 Hz. Before purchasing from a country with a 60 Hz power grid, please consult us. The number of feeders has not been counted; it will be confirmed upon request.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, workpiece length (max.): 4,600 mm, workpiece width (max.): 2,200 mm, workpiece height (max.): 250 mm, Equipment: rotational speed infinitely variable, Holz-Her 5-Axis CNC Nesting Machining Center DYNESTIC 7535 Working area: 4600 x 2200 mm. Gjdpex E Ah Iofx Ak Uebt Vector speed is 128.0 m/min. The milling spindle has a power output of 13.0 kW (S6) and accommodates tools with a maximum diameter of 350 mm via HSK interface. Drilling unit with 24 spindles – 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head is equipped with an integrated saw unit for blades with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position disc tool changer, pneumatically liftable and covered to protect the HSK 63F holders, as well as a single-position pick-up changer for saw blades up to 350 mm in diameter. Pneumatically retractable stops in the table for special machining either on the nesting table or using vacuum pods. Vacuum capacity of 750 m³/h, distributed across 2 pumps with 500 m³/h and 250 m³/h respectively, intelligently controlled by ECO-VAC software. To optimize vacuum efficiency, the table features a 16-zone vacuum system. The pre-installed pusher unit is connected to the extraction system and can be used for panel cleaning and/or clearing the nesting table. Delivery, installation, and machine commissioning training available directly through us at additional cost. The machine is currently located at our shipping warehouse in Gratwein, Austria. In case of discrepancies between the German version and any foreign language version, the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 4s FORMAT4 Profit H200 13.33 was manufactured in 2019. It features a CNC portal machining center with a working area of 4000 mm in the X-axis and 1670 mm in the Y-axis. The machine is equipped with an electrospindle power of 12 kW and a tool magazine with 12 positions. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 Profit H200 13.33 machine we have for sale. Contact us for further details. • Working field (max panel size) • X: 3300 mm • Y: 1280 mm • Z clearance: 250 mm • Spindle • Tool interface: HSK F63 • Rated power at: approx. 12,000 rpm • Cooling: Air-cooled • Rotation: CW / CCW • Tool magazine • Linear tool magazine (side-mounted): 12 positions • Additional linear magazine on gantry: 4 positions • Max. tool diameter: 250 mm • Max. tool length: 300 mm Gbodpfszug Hqox Ak Uet • Drilling unit • Model: DH 24 6H 2S • Vertical spindles: 18 (12 in X, 6 in Y) • Horizontal spindles: 6 (4 in X, 2 in Y) • Max. drill length: 70 mm • Max. tool diameter: 10 mm • Grooving saws: 2 (X and Y) • Max. saw diameter: 120 mm • Max. speed: 6,000 rpm • Vacuum table • 6 consoles (instead of 4) • Dual-circuit vacuum system • Vacuum cups height: 100 mm • Pneumatic console locking • Adjustable side stops (Y-axis) • Axis system • X-axis: Rack and pinion drive • Y/Z-axis: Ball screw drive • Linear guideways on all axes • Central automatic lubrication • Control and software • CNC control with CAD/CAM software • 3D simulation preview • DXF import capability • Parametric programming • Remote service package (internet-ready)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,550 mm, Used SCM Pratix S 15 - Year: 2012 - Available in January 2026 - 3 axes - Drill head - Videos available Gbjdexl D Slepfx Ak Uot

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. Gjdpfxezqucfo Ak Usbt The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: good (used), Year of construction: 2009, functionality: fully functional, The supporting structure is made from a thick, monolithic steel block with a reinforced core. The construction is triangular with a wide base and is designed to ensure the machine's stability under all processing conditions. Guideway lubrication is centralized, meaning all guideways on the machine are lubricated from a single point. The CNC features a full aluminum worktable with grooves for vacuum limitation or fixture mounting. This type of worktable is especially useful for “NESTING” operations. The electrical cabinet is built according to international standards, ensuring total reliability of the integrated components. Technical specifications: Working dimensions: With vertical milling: 3260 x 1250 mm With drilling head: 3330 x 1540 mm Maximum workpiece height: 180 mm X, Y, Z axis travel: 3420, 1690, 280 mm Tool storage positions: 12 Vacuum pump: 100 m3/h Power: 10.5 kW Rated voltage: 400 V Frequency: 50/60 Hz Gedoy Nv Ucspfx Ak Uebt Machine weight: 3400 kg Software: Xilog3 (supports .dxf file import) Year of manufacture: 2009

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 100 mm, number of axes: 3, overall weight: 3,350 kg, spindle motor power: 9,000 W, spindle speed (max.): 24,000 rpm, This 3-axis FELDER PROFIT H 20 CNC Wood Machining Centre was manufactured in 2011. It features a working range of 3,060 mm in the X-axis and 1,260 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine includes 14 vertical drilling spindles and 4 horizontal drilling spindles in the X-direction. If you are looking to get high-quality wood machining capabilities, consider the FELDER PROFIT H 20 machine we have for sale. Contact us for further details. • Number of Milling Spindles: 1 • Main Motor: 9 kW • Torque Support: Included • Tool Clamping System: HSK-F63 • Tool Changer Positions: 8 • Linear Changer: Included • Vertical Drilling Spindles: 14 • Horizontal Drilling Spindles X: 4 • Horizontal Drilling Spindles Y: 2 • Grooving Saw: In X-direction • Positioning Aid: Included • Crosshair Laser: Included • Vacuum Pump: Included • Number of Vacuum Pumps: 1 • Vacuum Pump Capacity: 90 m³/h • Safety Device: Safety mat (Trittmatte) • Tool Change Helper Device: Included • Workpiece Support Aids: Included • Pendulum Machining: Included • Control Unit: TPA ALBATROS • Software: TPA ALBATROS 2 Gsdjzvca Aepfx Ak Uobt • Total Connected Load: 15 kW

Condition: used, Year of construction: 2023, functionality: fully functional, workpiece height (max.): 60 mm, HOLZ-HER CNC - Dowel Drilling & Insertion Machine POWER - PIN 7605 Workpiece thickness: 12 - 60 mm Workpiece width: minimum 150 mm (horizontal & vertical processing) Workpiece length: min. 60 mm, max. unlimited (limited when using positioning stops) Software: Campus V8 Power-Pin (1x license) Continuous LED strip for easy orientation and status indication Dowel insertion unit DA102 for pre-glued dowels as well as for untreated dowels when used with white glue Glue application system LS2 with electronic monitoring of the nozzle needle ECO MODE for energy-efficient operation Drilling unit BA102 (horizontal), 3-spindle MOT3 package – motorized adjustment of drilling depth 2D barcode scanner 21.5" touchscreen The POWER-PIN dowel machine is suitable both as a standard dowel machine and as an ideal addition to, for example, nesting or console machines. From cabinet furniture to premium solid wood drawers from 12 mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. The continuous LED strip provides constant machine status indication and assists the operator by showing the correct workpiece position for insertion. The integrated barcode scanner can be used to read DataMatrix codes, for example, which contain all machining information about the workpiece. Drill positions and drilling depths are automatically set and approached by the machine – ensuring maximum precision and efficient operation. The machine has been refurbished at the Voitsberg factory and the software has been updated to the latest version available at the time of refurbishment! Gbedpfxoyzg Dfs Ak Ust Delivery, installation, and commissioning training for the machine can be arranged directly with us at an additional cost. The machine is currently located at our delivery warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1478, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, travel distance Y-axis: 1,790 mm, travel distance Z-axis: 430 mm, workpiece height (max.): 120 mm, number of slots in tool magazine: 10, overall weight: 3,300 kg, Equipment: CE marking, Lightly used CNC machine from Cosmec in very good condition. Vacuum pump 100 m³ Automatic central lubrication Cooling 8 support beams Gbodoy Ihkgspfx Ak Ust Main motor with HSK63F Drilling unit with vertical, horizontal spindles + slot saw Safety mat at the front Safety fencing 2 control stations at the front Operator console Remote control Immediately available from Barneveld (from photo 2 onward)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Work in X, Y, Z axes Working area 3100 x 1340, Z axis = 180 mm Horizontal drills on X axis – 6 pcs Horizontal drills on Y axis – 4 pcs Vertical drills on X axis – 8 pcs Vertical drills on Y axis – 6 pcs Gjdpjzx Amuofx Ak Uebt Two tool magazines: side – 11 positions and transfer – 14 positions Grooving saw on X axis Spindle 8 kW, air-cooled, 600–24,000 RPM, HSKF63 Becker Vacuum Pump 2.2 kW Option for dual-field operation X axis speed – 25 m/min (programmable) – 56 m/min (vector) Y axis speed – 50 m/min (programmable) – 56 m/min (vector) Z axis speed – 15 m/min

Condition: refurbished (used), Year of construction: 2025, Equipment: documentation/manual, CMS NC SA32 TM R65 CNC machining center for woodworking and plastic machining. The machine was originally manufactured in the 1994 and underwent a complete control and drive retrofit in 2025. As part of the retrofit, the machine was equipped with: New OSAI OPENcontrol CNC system New servo drives and servo motors New control electronics and operator interface Modernized machine control architecture and programming environment This upgrade combines the reliability of a modern CNC system with the robust industrial construction of a heavy-duty CMS machining center. Technical Specifications X-axis travel: 3,250 mm Y-axis travel: 1,250 mm Z-axis travel: 250 mm Vacuum worktable size: 3,240 × 1,200 mm R65 revolver unit with 6-position rotating drum 25 high-speed electrospindles (18,000 rpm) and 5 electrospindles (9,000 rpm) Tool holders: ETS32 collets, MK2 Morse taper, hollow cutters Ø30 mm Gbodpjzv Si Tjfx Ak Ust Feed speed up to 20,000 mm/min in X and Y axes Dual Becker VTLF250 vacuum pumps for workpiece clamping Machine weight: approx. 8,500 kg Equipment OSAI OPENcontrol CNC control system Vacuum workpiece clamping system Automatic centralized lubrication Hydraulic revolver positioning system Dust and chip extraction hood Complete technical documentation for both the machine and the new control system Condition The machine is fully operational and ready for production. The 2025 retrofit significantly improved reliability, serviceability, and future spare-parts availability while retaining the proven CMS mechanical structure. Inspection and testing under power are available by appointment. An additional identical CMS NC SA32 TM R65 machine is available and can be purchased separately either: as a spare parts machine, or as a complete operational machine with the original control system and software.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, DOOR PRODUCTION LINE CMS PRO EVOLUTION TWIN 60 Year 2011 This machine has a very low number of working hours, wrong investment by client . The machine is connected and can be inspected in Poland at any time after agreement. For all technical information please click below on included PDF document . Gjdpfxjzr H Tfj Ak Usbt

Condition: used, Year of construction: 2014, Main spindle power: 13.2 kW Drilling unit motor power: 7 kW Gsdpfszuwxdsx Ak Uobt 3-axis machine Drilling unit: Technical data - Nut saw - 2 horizontal drilling spindles in the X-axis (left/right) - 1 horizontal drilling spindle in the Y-axis (left/right) - 10 vertical drilling spindles

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, operating hours: 100,000 h, input voltage: 4,000 V, type of input current: three-phase, total length: 65,000 mm, overall weight: 40,000 kg, controller model: partially manual, Equipment: chip conveyor, corrugation cardboard line, C,B,E flute 1530mm units,the bobbin feet of the machine 4/3single 1 double ,glue transfer unit, heating tunel, side cutting and cut off unit, Included the gaz and air stations, glue preparing unit. all are parts of the production line. Gbodowycrcspfx Ak Ujt

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Gsdpsx A E Tfofx Ak Uebt Total number of tool changer positions: 15

Condition: good (used), Year of construction: 2007, machine/vehicle number: AA1/016112, functionality: fully functional, overall weight: 3,900 kg, table length: 3,050 mm, table width: 1,240 mm, Equipment: CE marking, documentation/manual, SCM RECORD 100 AL. 4 axis • 4 controlled axis: X, Y, Z y C X: 60 m/min Y: 45 m/min Z: 30 m/min • Aluminiun working table, nesting type: X: 3.050 mm Y: 1.240 mm • 2 working areas • 6 perimetral pneumatic reference cylinders • Vacuum pump BECKER: 250 m3/hour • Telecomand • XILOG PLUS software. Allows importing DXF files • Security fences • Security carpets • CE rules • Year 2007 Gedpfozg H Sdsx Ak Ujbt ROUTER UNIT 8,5 kW / 11,5 HP 0 to 24.000 rpm Automatic Tool Change System HSK F-63 12 positions rotative tool magazine MULTIDRILL UNIT 7 vertical boring heads 1+1horizontal boring heads X 1+1horizontal boring heads Y 2.000 to 6.000 rpm SAW UNIT Cutting in X Diameter: 120 mm 3.500 to 7.500 rpm