Used Guk Zg 500 for sale (16,208)

Condition: used, functionality: fully functional, Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Voltage: 380 V Kodpfxoz D Hrvo Anusnc Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. Knsdpfez E Nh Nex Anujc The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 90 mm, Clamping force 5000 kN Mould opening force, max. 279 kN Travel force movable platen opening 137,1 kN Travel force movable platen closing 116,8 kN Size of mould platens (h x v) 1370 x 1200 mm Distance between tie bars (h x v) 1000 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Kjdpfjz I Dvyex Anujnc Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 90 mm Ls/D ratio 20 Injection pressure 1839 bar Stroke volume 2290 ccm Shot weight (PS) 2084 gr. Injection rate 604 ccm/s Screw speed 195 1/min Plasticising rate max. 134,2 g/s Nozzle pressure 129,4 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1175 ltr. Dimensions and weights: Dimensions of the machine ca. 8,00 x 2,52 x 2,40 m Total machine weight 28800 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pull on fix plate - 2 x core pulls on movable plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-250 Year of manufacture: 2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1,820 bar Shot volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 2,330 kg Length/Width/Height: 3.41x1.47x1.99 m Kedpfjz Iqyfjx Anuonc Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, tire size: 385/55-22,5, axle configuration: 6x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 610 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, loading space length: 65,000 mm, loading space width: 24,800 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors Ksdpfx Asz I Rvtjnuenc - Passenger seat - Differential lock - High beam headlights - Low noise - Speed limiter - Cabin - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-sprung seats - Particulate filter - Radio/Multimedia system - Disc brakes - Sunroof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 6-121 VOLVO FH 500 LL 6x2 CONTAINER CHASSIS WITH PALFINGER PK 53002-SH LOADING CRANE Vehicle available in black and white! Currently under construction, therefore reference images. Loading crane: Palfinger PK 53002-SH with 8 extensions, at 20.5 m this crane can still lift 1580 kg! Endless swivel range Double knuckle system (overextending boom up to 15 degrees) Palfinger stability control Radio remote control with linear levers and display of pressure values HPLS system (Extra Power) Outriggers can be operated via radio LED work lights and more Vehicle description: Volvo FH 500, new model Low-profile container chassis 2 pairs of extendable container locking devices, extendable to 3 m for accepting 20-foot containers 4 warning signs with lighting, extendable to 3 m Chassis dimensions 6,500 mm x 2,480 mm Side walls + rear wall 600 mm high Front wall 1,900 mm high Lashing eyes at a distance of approximately 250 mm Forklift protection Globetrotter safety cab, FH Diesel engine 13 l, 510 hp / 375 kW, 2550 Nm Exhaust emissions compliant with Euro 6E, with SCR, particulate filter and exhaust gas recirculation I-Shift, automated 12-speed transmission I-Shift driving modes: Standard, Performance and Economy Volvo Engine Brake (VEB+) Wheelbase 5,600 mm Drive 6x2 Differential lock Suspension air/air Front axle tires 385/55R22.5, driving axle tires 315/70R22.5, trailing axle tires 385/55R22.5 Trailer coupling Rockinger 400 G 150 LED headlights Rain sensor (sensor-controlled windshield wipers) Daytime running lights LED, "V-light" LED taillights, brake lights with emergency braking flash sequence Auxiliary air conditioning Auxiliary heater Driver's seat comfort, air-sprung, heated, seatbelt integrated into seat Leather steering wheel Multimedia/infotainment system with navigation Cool box with freezer compartment 33 L under bed Roof hatch, electrically operated, tinted glass Close-range camera on the passenger side for blind spot monitoring Adaptive cruise control (ACC) with collision warning and emergency braking function Lane keeping assist and more Financing / hire purchase, as well as leasing / partial amortization leasing is possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Condition: used, mileage: 238,000 km, power: 375 kW (509.86 HP), first registration: 06/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, navigation system, parking heater, soot filter, The vehicle has an engine failure. Main components: FH Globetrotter safety cab Wheelbase: 3,800 mm Chassis height: MED (medium) Diesel engine 12.8 l, 510 hp/375 kW, 2,550 Nm Rear axle RSS1352A, single reduction, 13 t axle load, GVW 52 t I-Shift AT2612, automated 12-speed transmission (direct gear), max. input torque: 2,652 Nm Drive axle ratio 2.47 : 1 Reinforced engine brake Volvo Engine Brake+ (VEB+) Aluminum rims Dura-Bright EVO (polished) Paint: 1103WHIT Winter White Rest cab FH, one bed Info and media package with navigation Driver comfort package Side collision avoidance and lane change assist (both sides) Close-range camera on the passenger side I-ParkCool (integrated parking air conditioning with automatic temperature control) Auxiliary drive PTR-DH (fast), gearbox side, connection: 1 DIN at the rear for pump Cab interior, living Driver's seat Comfort, air-suspended, heated, seatbelt integrated Two armrests on the driver's seat Armrests covered in leather Passenger seat Standard, fixed Foam comfort mattress for lower bunk, firm, foldable, with safety net Mattress topper Basic (20 mm) Storage space under the bunk Storage compartments above the bunk, capacity: 245 l Control panel (basic) on the bunk (interior light, auxiliary heater, sunroof, and door locking) Cool box 33 l, with freezer compartment, under the bunk Compartment under the dashboard with drawer Cup holders front and rear Make-up/shaving mirror Two flexible reading lamps Interior lighting with dimmer and red night lighting Side sun visor, driver side Sun visor inside, manual roller blind Roof window and emergency exit, can be opened manually (tinted glass) Curtains on windshield and windows 2 rubber floor mats Central locking with remote control Auxiliary heater for cab, 2 kW Automatic climate control with sun sensor Cab interior, driving Load/axle load indicator in the vehicle display Battery indicator in the display Steering wheel, leather version Steering wheel adjustment in height and inclination, with additional steering column adjustment Roof antenna and preparation for CB radio Digital tachograph, generation 4 Eco-Cruise-Control (cruise control) incl. brake cruise control Lane keeping assistant Battery pulse indicator Adaptive Cruise Control (ACC) with collision warning and emergency braking function Immobilizer, transponder in the key Gear/I-Shift operation via control unit on the driver's seat I-See with map-based topographic information (high resolution) Stationary trailer brake active up to max. 7 km/h Electronic Stability Program (ESP), basic with normal center of gravity Chassis Rear axle load (technical) max. 13 t Front axle load (technical) max. 7.5 t Parabolic suspension front, 2-leaf (normal stiffness) Air suspension rear, 4 air springs Three ride heights for air suspension 650 liter aluminum tank left 112 liter AdBlue tank right Single-battery system: one battery block (2 individual batteries) for the entire vehicle electrical system Two work lights rear/top on the cab, LED white Trailer detection with LED sensor Frame end chamfered Frame thickness 6.5 mm Frame profile height 266 mm Frame length rear 825 mm Extra spring accumulator on the front axle Disc brakes, solid discs on the steering axle Brake discs on the drive axle, solid, 410 mm diameter Air compressor 2-cylinder, 1,100 l/min Support bow (steel) for trailer connections behind the cab Saddle coupling SAF-Holland/GF, SK-S 36.20, cast 1 chock, foldable, position at the front Knsdpfx Anez I Htheusc Five pneumatic

Condition: used, mileage: 1,032,111 km, power: 375 kW (509.86 HP), first registration: 09/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Data* Volvo FH 500 4x2 Tractor * First registration: 2016 * Engine: Volvo D13K500 Euro 6 Kedpfxoz Siw He Anuenc * Power: 500 hp (375 kW) * Displacement: 12.8 l * Transmission: Volvo I-Shift 12-speed automatic * Air suspension on rear axle * Aluminum rims Dura-Bright polished ----Safety equipment* ACC Adaptive Cruise Control * Collision warning system with emergency braking function * Lane Keeping Assist * Lane Change Assist * Driver Alert System (fatigue detection) * ESP Electronic Stability Program * EBS Electronic Braking System * ABS * Immobilizer * Engine brake Volvo VEB+ ----Comfort* Globetrotter cab * 2 beds * Stationary air conditioning I-Park Cool * Cab heater * Automatic climate control * Comfortable driver's seat, air-suspended and heated * Comfortable passenger seat, rotating * Electric sunroof * Electric windows * Central locking with remote control * Cooler box under the bed * Writing board on the steering wheel * Additional storage compartments * Two flexible reading lamps ----Multimedia & Communication* Radio/CD/MP3 * Bluetooth hands-free system * Navigation * Telematic system * Dynafleet preparation * FMS interface * 8 speakers * USB and AUX connection * 9" touch color display ----Lights & Visibility* LED daytime running lights * LED fog lights * LED work lights on the rear of the cab * Reversing/work lights LED * Rotating beacon lights LED (orange) * Electrically adjustable and heated mirrors * Front mirror * Wide-angle mirror * Sun visor (external) ----Chassis & Technology* Air suspension on rear axle * Electronic level control * Differential lock * Disc brakes all around ----Aerodynamics* Roof spoiler * Side skirts on the cab * Bumper with spoiler lip ----* Tire dimension front axle: 385/55 R22.5 * Tire dimension rear axle: 315/70 R22.5 * Fuel tank: 610 liters * AdBlue tank: 100 liters * Technical gross vehicle weight: 19,200 kg * Tare weight: 7657 kg * Overall length: 5890 mm * Wheelbase: 3,700 mm * Next inspection due: 03.2026 ----Vehicle number/Vehicle: 12346----Errors and prior sale are reserved----Advertisements and various inscriptions have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. We can offer you the following services for an additional fee: ----Trade-in of your old vehicle TÜV/inspection acceptance Complete export handling Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----YOUR VTS TEAM

Condition: excellent (used), Year of construction: 2010, operating hours: 5,285 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 105 W, type of cooling: air, total width: 1,240 mm, total height: 1,140 mm, total length: 1,920 mm, overall weight: 580 kg, travel distance X-axis: 1,245 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 610 mm, input current: 20 A, laser wavelength: 10,600 nm, input frequency: 50 Hz, Speedy 500 in good condition, coming from a model-making workshop. Few operating hours (5285 hours). Ksdpfx Aez Eh Eajnujnc Laser source replaced in late 2018 (Synrad firestar ti100; nominal 100 W, 151 W as a new part; 2392 hours of operating time). Power supply also replaced in 2018 (Meanwell RSP-2400). Last service: 08/2026 Extensive accessories included: Laser pointer for precise alignment of the workpiece 5.0" lens 2.0" lens Pass-through – for processing longer sheets Gas kit Cutting table Vacuum table Honeycomb table / aluminum honeycomb core for vacuum table Rotary engraving attachment – for bottles, glasses, etc. iCut software and camera (currently disassembled) Includes Mistral ECO 220V / 50HZ extraction system (motor relatively new). Original new price: €86,708.58

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Vemag 500 filling robot for sale. Kjdpfx Asz Eh Tdonusnc For more information or a video of the machine in operation, please contact me via email.

Year of construction: 2015, condition: used, Used Machine Year of Manufacture: 2015 Features and Technical Specifications - Stationary piston compressor with 2 two-stage, two-cylinder, high-performance gray cast iron units designed for a long service life - Maximum flow rate: 2 x 960 l/min - Filling capacity: approx. 2 x 750 l/min - Maximum pressure: 10 bar Knodpfx Ansz Ek Dreuoc - Tank capacity: 500 l - Motor power: 2 x 5.5 kW - Power supply: 400 V - Dimensions L x W x H: 2020 x 570 x 1340 mm - Sound pressure level at 1 m distance per DIN 45635: 83 dB(A) - With base load alternating control - 1st unit: 428 operating hours - 2nd unit: 418 operating hours

Condition: used, mileage: 148,637 km, power: 368 kW (500.34 HP), first registration: 04/2025, fuel type: diesel, empty load weight: 8,322 kg, maximum load weight: 11,778 kg, overall weight: 20,100 kg, axle configuration: 4x2, wheelbase: 3,750 mm, color: red, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, navigation system, parking heater, Color: Red, Unladen weight: 8322 kg, Gross vehicle weight: 20100 kg, Front axle: 385/55 R22.5, Rear axle: 315/70 R22.5, Seats: Leather, Air suspension, Retarder, Digital tachograph, Fifth wheel coupling: JSK 42KZ, -560 mm, EBS - Electronic Braking System, ESP - Electronic Stability Program, Automatic air conditioning, Auxiliary heater, Adaptive Cruise Control (ACC), Parking heater with automatic preselection, Driver's seat heating, LED headlights, Headlight cleaning system, Automatic lights, Headlight leveling, Radio, Bluetooth audio streaming, Rain sensor, Multifunctional leather steering wheel, Mechanically adjustable steering column, Lumbar support, Alloy wheels, Electric windows 2x, Roof spoiler, Fog lights, Electric and heated exterior mirrors, Electric curb mirror, Wide-angle mirror, Tire pressure monitoring system, Central locking with remote control, Windshield, Refrigerator, Axle load indicator, Hill Hold Control (HHC), LED daytime running lights, Connector 1x15 pin, Ferry function, Telematic system, Driver's seat air conditioning, Side skirts, Cab suspension, Microwave, Coffee machine, Smart tachograph 2 Knedpfx Ansz Elkasujc

Condition: excellent (used), Year of construction: 2013, Column jib crane, overhead crane, workstation crane -Manufacturer: Abus, Column jib crane type LS -Documentation: Crane inspection log available Knjdpfsz A R H Iox Anuec -Base plate: 600 x 600 mm -Load capacity: 500 kg -Chain hoist: Abus type GM 2 500.4-2 -2x lifting speed: 4.0/1.0 m/min -Reach: 3000 mm -Total height: 4180 mm -Hook height: 3100 mm -Swivel range: 270° -Transport dimensions: 4180/800/H710 mm -Weight: 428 kg

Condition: excellent (used), functionality: fully functional, maximum cutting width: 360 mm maximum cutting height: 135 mm motor power: 8.5 kW maximum blade diameter: 500 mm minimum blade diameter: 490 mm blade speed: 2800 rpm CE marking 400 V safety clutch Kodpfx Anoz E H Hcousnc feeder length: 660 cm receiver length: 530 cm machine length: 90 cm year of manufacture: 2011

Year of construction: 2026, condition: new, The ProFruit UNLOADER 500 is a hydraulic bin tipper for lifting and emptying fruit, vegetable and berry bins into washing, sorting, crushing or conveying equipment. Operation Knjdpfx Ansz Ndy Asusc The bin is positioned inside the tipping cradle. The hydraulic system raises and rotates the cradle, discharging the product directly into the receiving machine or conveyor. An enclosed cradle with high side walls guides the product and supports the bin during tipping. Operation is controlled by separate Start, Stop and emergency-stop buttons together with a manual UP/DOWN lever. Key features • Hydraulic lifting and tipping system • Enclosed tipping cradle for controlled discharge • Open front for convenient bin positioning and removal • Adjustable supporting feet • Suitable for integration into fruit and vegetable processing lines Technical specifications • Product types: fruit, vegetables and berries • Discharge applications: washing, sorting, crushing and conveying equipment • Controls: Start, Stop, emergency stop and manual UP/DOWN lever • Construction: stainless steel Hygiene and cleaning The stainless-steel construction is suitable for food-processing environments, while the open-front design provides accessible bin handling around the tipping cradle.

Condition: excellent (used), mileage: 389,419 km, power: 368 kW (500.34 HP), first registration: 06/2023, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,700 mm, total width: 2,550 mm, total height: 3,800 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2023, Equipment: AdBlue, Bluetooth, air conditioning, central locking, cruise control, fridge, retarder, seat heater, spoiler, - Adaptive Cruise Control - DAB Radio - Roof spoiler - Leather interior Knedoz Iy H Ujpfx Anujc - Leather upholstery - Air suspension - Air-suspended seats - Side skirts - Lane keeping assist Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Max. axle load: 8000 kg; Steered; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 1: Lift axle; Max. axle load: 7500 kg; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 2: Dual tires; Max. axle load: 11500 kg; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 77%; Tire tread depth right outer: 80% Weights Unladen weight: 9,482 kg Payload: 17.5 kg GVWR: 000 kg Interior Upholstery: Leather Condition Technical condition: very good Optical condition: very good Damage: none Curious about what we can do for you? Contact our sales team today! Our team of experienced specialists is available to you every day to assist you in finding the right vehicle. Would you like to see for yourself? Simply arrange a test drive and experience the vehicle yourself. At KW-Automotive, you will find a large selection. We always have at least 50 high-quality light commercial vehicles and trucks in stock. This way, you are guaranteed to find a vehicle that meets your requirements and your budget. Every year, we support hundreds of satisfied customers – both in the Netherlands and abroad. Why KW-Automotive? Personalized service Reliable vehicles Attractive prices Fast delivery, so you can get started right away Quick communication via telephone and WhatsApp Sales and delivery also to foreign countries For many years, we have been a reliable partner for our customers – and we are proud of that. Please note: All selling prices are plus preparation and delivery costs. Would you like to learn more about a specific vehicle? Visit our website for detailed information, videos and technical details. Do you need a quick answer? Simply write to us via WhatsApp! We will promptly send you further information, photos or a video. Job van Eldik

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 290 l, brakes: retarder, color: grey, driver cabin: day cab, gearing type: automatic, suspension: steel, loading space volume: 20 m³, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power mirror, retarder, seat heater, soot filter, - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Leaf spring suspension - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air-suspended seats - Air horn - Particulate filter - Radio/Multimedia system - Rotating beacon - Reversing camera - Seat heating - Sun visor - Lane keeping assist - Stability control - Windshield Internal number for inquiries: 6-099 Volvo FMX 500 8x4 BB tipper truck, top-of-the-line!!! "TECNOCAR Emil-Camion S4" NEW AT PAVIC -> Available in the colors: Traffic white and Nardo gray (as in the advertisement) Vehicle data: Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm Engine brake, exhaust gas pressure regulator (incl. engine control for I-Shift) I-Shift ATO2612, automated 12-speed gearbox (overdrive), max. input torque: 2,652 Nm Reinforced gearbox Compact retarder, mounted on the gearbox (rear) with medium oil, braking power: 450 kW Total weight, technically: 60 t (observe the trailer load!) Wheelbase 4,350 mm Driver comfort package Selected Construction site package for FMX short cab Parabolic suspension front, 3-leaf (higher stiffness) Front axle load max. 18.0 t (technically) Rear axle load (technically) max. 32 t Drum brakes, cast iron material 290 l fuel tank, left side between double front axles AdBlue tank, usable content: 57 l, between the front axles Reversing monitor/camera Radio reception: AM/FM and DAB/DAB+ (analog & digital) Driver's seat comfort, air-suspended, seat belt in seat LED main headlights Roof antenna and preparation for CB radio Body data: Tipper body in top quality from the market leader EMILCAMION from Italy - 20 m³ - Steel structure made of HB 450, floor 8mm, sides 6 mm - Hydraulic tailgate - Lateral and rear reflective contour marking - Side marker lights LED - Stainless steel fenders - Stainless steel trim parts - Spare wheel holder - Stainless steel tool box on the passenger side - Manually foldable rear bumper - Electric tarpaulin black - Two-color paint (e.g.: NARDOGRAU AUDI LY7C, door frames and tailgate black) - Vibrator electric, controlled by remote control - Protective grille for rear lights - Water tank - Foldable ladder on the driver's side Price: FROM 164,990.00 € net This is a non-binding General information Year of manufacture: 2026 Cab: Local traffic Technical information Number of cylinders: 6 Engine displacement: 12,800 cc Axle configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle 1: Tire size: 385/65-22.5; Steered Front axle 2: Tire size: 385/65-22.5; Steered Rear axle 1: Tire size: 315/80-22.5; Differential lock Rear axle 2: Tire size: 315/80-22.5; Differential lock Weights Unladen weight: 15,500 kg Payload: 26,500 kg GVW: 42,000 kg Ksdpfx Ansz N Dtpjuenc Functional Brand of body: Tecnocar Emil Camion S4 Pump: Yes Tipper: Rear Condition General condition: very good Technical condition: very good Optical condition: very good Damage: none

Condition: used, Year of construction: 2018, overall weight: 70 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: MB Conveyors Type: PA_ALL 2470 x 500 Condition: gebraucht CONVEYOR: - Effective length: 2470 mm Effective width: 500 mm Height min. / max.: 800 / mm Total installed power: - Other equipment: PU Gurt, Lichtschranke, Abräumtaste CONTROL: - Bildschirmsprachen: - Operating manuel: - GENERAL DATA: - Total weight: 70 kg Total size L x B x H: 2,5 x 0,6 x m Knodjthwrtjpfx Anuoc

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase. Knsdpez Et E Eofx Anuec

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMF 500 Linear Control: Heidenhain iTNC 530 Year: 2007 SPECIFICATIONS Travel Kedpfx Ansz Rl N Uousnc X-Axis: 5.000 mm Y-Axis: 920 mm Z-Axis: 820 mm Panning head: 1°, Hirth Spindle speeds: 20 - 10.000 rpm Tool: SK 50 Toolchanger Tool capacity: 80 Table size: 2 x 2.700 x 900 (max. 5.610) mm NC rotary table Equipment Caliper: Heidenhain TS 649 Oil mist separator Internal cooling: 40 bar Cooling tank: 980 l Chip conveyor Electronical handwheel separating plate

Condition: new, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), hill-start assist, onboard computer, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Brake booster - Differential lock - Low noise - Speed limiter - Air conditioning - PTO - Rear view camera EUROMIX TO GO – immediately available new vehicles in stock at Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. VOLVO FMX13 500 8x4 L13 EURO 6e EuromixMTP SCORPION SCO 25-59 Unladen weight: approx. 12,050 kg Payload: approx. 19,950 kg Vehicle data Year of manufacture: 2026 New vehicle Volvo FMX 500 Wheel configuration: 8x4 Permissible total weight: 32,000 kg Technical gross vehicle weight: 60,000 kg Wheelbase: 4,350 mm Engine: Volvo D13K 12.8 liter inline six-cylinder Power: 368 kW (500 hp) Torque: 2,500 Nm Emission standard: Euro VI Step E Volvo I-Shift 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Day cab Cab color: Winter White Equipment: Engine & Drive Volvo D13K Euro VI Step E engine Volvo I-Shift 12-speed automatic transmission Volvo Engine Brake Plus (VEB+) I-See predictive cruise control I-Roll fuel-saving function Economy and Balanced driving programs Reinforced transmission for construction site use Engine auxiliary drive SAE 1410 Transmission oil cooler Twin-cylinder air compressor (900 l/min) Roof air intake Heated fuel filter Chassis Wheel configuration 8x4 Leaf spring suspension front and rear Front axles 2 × 8,000 kg Rear axle bogie 26,000 kg Planetary rear axles Differential locks Active Grip Control Axle ratio 3.33 Dual power steering Wheels & Tires Steel rims Continental CrossTrac 315/80 R22.5 Tire pressure monitoring system Tire inflation hose 20-ton jack On-board tools Cab & Comfort Day cab Air-suspended comfort driver's seat Co-driver's seat with adjustable backrest Air conditioning with sun sensor Digital 12-inch instrument cluster Smart tachograph DTCO 4.1 DAB radio Four speakers Multi-function steering wheel Electrically adjustable and heated exterior mirrors Curb and front mirrors Roof hatch Central locking with remote control Tinted windows Additional cab insulation Safety Equipment Electronic stability program (ESC) ABS / EBS Hill start assist Emergency braking assist (AEBS) Side collision assist Driver attention assist Adaptive cruise control SCORPION SCO 25-59 ROLL-OFF DUMP BODY Robust and powerful roll-off dump body for daily use in construction, waste disposal, recycling and container Your advantages • Ready for immediate use: concrete pumps, concrete mixers, dump trucks, roll-off dump bodies • Chassis, superstructure and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts Kjdpfxjz D Utuj Anujnc • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila...

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, onboard computer, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Differential lock - High beam headlights - Low noise - Speed limiter - Air conditioning - Air-suspended seats - PTO (Power Take-Off) - Rear view camera - Sun visor EUROMIX TO GO – immediately available new vehicles in stock at Porta Westfalica. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. VOLVO FMX13 500 8x4 L13 EURO 6e EuromixMTP TMK 22m³ Rectangular dump body tipper Vehicle data Year of manufacture: 2026 New vehicle Volvo FMX 500 Wheel arrangement: 8x4 Permissible total weight: 32,000 kg Technical gross vehicle weight: 60,000 kg Wheelbase: 4,350 mm Engine: Volvo D13K 12.8-liter inline six-cylinder Power: 368 kW (500 hp) Torque: 2,500 Nm Emission standard: Euro VI Step E Volvo I-Shift 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Day cab Cab color: Winter White Equipment - Engine & Drivetrain Volvo D13K Euro VI Step E engine Volvo I-Shift 12-speed automatic Volvo Engine Brake Plus (VEB+) I-See predictive cruise control I-Roll fuel-saving function Economy and Balanced driving programs Reinforced transmission for construction site use Engine PTO SAE 1410 Transmission oil cooler Two-cylinder air compressor (900 l/min) Roof air intake Heated fuel filter Chassis Wheel arrangement 8x4 Leaf spring suspension front and rear Front axles 2 × 8,000 kg Rear axle bogie 26,000 kg Planetary rear axles Differential locks Active Grip Control Axle ratio 3.33 Dual power steering Wheels & Tires Steel rims Continental CrossTrac 315/80 R22.5 Tire pressure monitoring system Tire inflation hose 20-ton jack On-board tools Cab & Comfort Day cab Air-suspended comfort driver seat Passenger seat with adjustable backrest Air conditioning with sun sensor Digital 12-inch instrument panel Smart tachograph DTCO 4.1 DAB radio Four speakers Multi-function steering wheel Electrically adjustable and heated exterior mirrors Curb and front mirrors Roof hatch Central locking with remote control Tinted windows Additional cab insulation Kjdpfoz Erufex Anuenc Safety Equipment Electronic Stability Program (ESP) ABS / EBS Hill start assist Emergency braking assist (AEBS) Side collision warning Driver alertness system Adaptive cruise control Rear view camera Reversing warning LED headlights LED daytime running lights Automatic headlights Additional Equipment Tipper equipment: EuromixMTP TMK 22m³ Rectangular dump body tipper Your benefits • Immediately ready for use: concrete pumps, concrete mixers, tippers, roll-off tippers • Chassis, body, and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: ...

Condition: good (used), mileage: 399,815 km, first registration: 03/2023, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,210 mm, total width: 2,550 mm, total height: 3,870 mm, Year of construction: 2023, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - 2nd diesel tank - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Globetrotter XL - LED lamp - Leather / Fabric - Alloy wheels - Manual - Auxiliary drive - Radio/cassette - Lane keeping assist = Notes = Number of axles: 2, Configuration: 4x2, Total tank capacity: 1150 liters, 2nd diesel tank, Height of fifth wheel coupling: 117 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 1 ton, Alloy wheels, Suspension type: Air suspension, Type of cab: Globetrotter XL, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Stationary air conditioning, Stationary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Type of lighting: LED lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Fuel: Diesel, Euro: 6, Gearbox type: I-Shift, Gearbox type: Volvo, Gears: 12, Power steering, ABS, ASR, Auxiliary drive, Central locking, Seat arrangement: 1+1, Seat cover: Leather / Fabric, Seat adjustment: Manual = Further Information = Gearbox Gearbox: VOL, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 6 mm; Tire tread depth right inside: 4 mm; Tire tread depth right outside: 5 mm; Suspension: Air suspension Kjdpfx Asz Aanwenusnc Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €1,136 per month (default, 60 months); Inquire for further information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Inquire directly about our European warranty package.

Year of construction: 2015, condition: excellent (used), Exceptional Opportunity! From the former collection of the Max Planck Institute in Freiburg, we can offer you this highly efficient gene sequencing system, model "NextSeq 500," from the world-renowned brand "illumina." This system is one of the most powerful and widely used fully automatic gene sequencing systems, and it has become indispensable in virtually every laboratory worldwide. It is primarily used as a high-throughput system for the automated generation of DNA clone clusters through sequencing and primary analysis. Thanks to its particularly compact design, it is also perfectly suited for smaller laboratories and can be used ideally as a stand-alone device – all the necessary components are already integrated into the device, and complete operation can be performed via the built-in screen and a wireless keyboard. The device was acquired by the Max Planck Institute in 2016 and has been used very little. It has been continuously serviced by the manufacturer's customer service department and has only completed 395 runs – it is therefore in flawless condition both visually and technically – see the pictures. The device can be used immediately; however, for the sake of good order, we would like to point out that in a commercial operation, the legally required tests according to MTK/STK must be carried out again. Dimensions (H x W x D): approx. 585 x 534 x 635 mm Weight: approx. 85 kg The total weight of the system, including accessories and pallet, is approximately 110 kg! Kjdpfx Anjz Rph Iouenc The device can be picked up from our premises during regular opening hours after prior telephone arrangement. For an additional charge, shipping can be arranged within three working days after payment receipt, insured via a shipping company. The sale is exclusively to commercial businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; a direct commercial sale to private individuals is expressly not permitted! The goods are sold excluding any warranty or liability for defects. The exclusion does not apply to claims for damages arising from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, and health. If you have any questions regarding prices or technical details, please do not hesitate to contact us at the address provided.

Condition: excellent (used), TETRA PAK A3 FLEX 1000 B ASEPTIC FILLING MACHINE – 500 ML FORMAT Industrial aseptic filling machine, TETRA PAK A3 FLEX 1000 B, configured for the automatic packaging of liquid food products in 500 ml multilayer cardboard Tetra Brik Aseptic containers. The machine uses aseptic forming, filling, and sealing technology, integrating the sterilization of the packaging material, the formation of the brick, the dispensing of the product, and its hermetic sealing into a single machine. Tetra Pak A3 Flex technology is designed for the industrial packaging of previously sterilized products, allowing for the production of long-life beverages without the need for refrigeration before opening, provided that the required processing and sterility conditions are met. MAIN FEATURES - Manufacturer: TETRA PAK - Model: A3 FLEX - Version: 1000 B - Filling format: 500 ml - Type: Automatic aseptic brick filling machine - Packaging: Tetra Brik Aseptic - Automatic forming, filling, and sealing system - Continuous feed of packaging material via reel - Sterilization of packaging material - Formation of multilayer cardboard packaging - Filling of previously sterilized product - Longitudinal and transverse sealing system - Automatic cutting and forming of packaging - Control of aseptic conditions during the process - Automatic transport and discharge of packaging - Tetra Pak electronic control panel - Operating parameter monitoring system - Upper platform for access and maintenance - Industrial construction with stainless steel components - Integrable into complete aseptic packaging lines OPERATING PROCESS The multilayer packaging material is fed into the TETRA PAK A3 FLEX from a reel and passes through the sterilization system before being formed. Ksdpez Rzidefx Anusnc Subsequently, the material is transformed into a continuous tube through longitudinal sealing. The product, previously treated using a compatible UHT system, is introduced inside under aseptic conditions. The machine performs the transverse sealing, cutting, and forming of the individual packages, producing hermetically sealed bricks ready for the next production stages. The finished packages can be transferred to inspection, coding, capping, grouping, case packing, and palletizing systems. APPLICATIONS Particularly suitable for dairy industries, juice, nectar, plant-based beverage, and other long-life liquid product manufacturers. Depending on the installed configuration, it can be used for: - UHT milk - Flavored milk - Dairy smoothies - Fruit juices - Nectars - Plant-based beverages (soy, oat, or rice) - Nutritional beverages - Other liquid beverages compatible with aseptic packaging The TETRA PAK A3 FLEX 1000 B constitutes an industrial solution for automating the aseptic packaging of beverages, combining packaging formation, filling, and sealing in a single machine. The exact formats, production capacity, and compatibility with different products will depend on the installed configuration and tooling. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), mileage: 694,885 km, power: 375 kW (509.86 HP), first registration: 03/2021, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,990 mm, total width: 2,520 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2021, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, parking heater, power assisted steering, second fuel tank, soot filter, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system Kjdpfx Asz Ixzdjnujnc - Aluminum fuel tank - Leaf spring suspension - Brake booster - Roof spoiler - High beam headlights - Speed limiter - Air conditioning - Leather interior - Leather upholstery - Air suspension - Air horn - Particle filter - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater - Bumpers in body color - Automatic heating system = Notes = Volvo FH 500 I-Save XL cab I-PARK-COOL 694885 km 2021 VEB+ 2 tanks Smart Tacho 2 Steel air suspension, 4 bellows Auxiliary heater/air conditioning Navigation Leather seats 2 air-suspended seats Refrigerator 2 bunk beds (the upper bunk is removed) Air conditioning Adaptive cruise control (ACC) Cruise control Lane keeping assist Automatic transmission Euro 6-D 4x2 TÜV/MOT/APK valid until 03/2027 Truck registered in Belgium Chassis number: YV2RT40A7MB336646 Video of the truck (YouTube): EXPORT SERVICES ————— • NL transit registration/license plates with insurance for 14 days • Austrian transit registration/license plates with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with trailer The prices for export services are exclusive of the quoted price. Please contact us for more information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. GEERTS Trucks & Trailers / GEERTS Nederland B.V. Spoorlaan Noord 17 5121 WV Rijen The Netherlands