Used Glass Cutting Line for sale (25,585)

Condition: excellent (used), Year of construction: 1976, strip width: 400 - 2.100 mm strip thickness: 0,5 - 3 mm coil weight: 40 t Gjdpoqw Aacjfx Angjuh coil ID: 508/610 mm

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  - Capacity: up to 135 bottles per minute (BPM) - Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz - Filling product: beer, carbonated beverages, kombucha, functional drinks - Filling system: isobaric probe filling with electronic level control - Fill range: 12 oz – 24 oz containers - Labeling system: cold glue labeling - Bottle detection: integrated bottle burst detection system - Construction: all stainless steel, high-hygiene design - Cleaning: automatic CIP capability - Operation: touchscreen HMI with recipe and product management - Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) - Note: frequency / voltage converter required for non-US markets - Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  - Depalletizer | KOSME / Semidepal | 2015 - Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 Guodpfxsyigigo Angeh - Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 - Bottle Conveyors | KOSME | – | Included | 2015 Additional Information - Manuals included - Basic tooling and format change parts for 12 oz and 22 oz included - Additional documentation available upon request - All conveyance lines included - Dismantling team available to supervise reinstallation and recommissioning - Utility specifications (air, CO₂ / gas) available upon request

Condition: used, Year of construction: 2013, Second hand automatic shape glass cutting table (jumbo), BOTTERO Type 352 BCS-J, Year 2013 Gsdpfowfhidsx Angjuh

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm Guedpfjy Nypkjx Angjh No. of strips: max. 11 coil weight: max. 25 t coil OD: max. 2.000 mm mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019

Condition: excellent (used), CN LINE of Cutting-Off and Tenoning-Mortising for 5-pieces front drawers or kitchen front doors 200037A) Optimizing Defecting Cut-off Saw "OMGA" Mod. Optima 120 SNC 4000 Guedozxn S Aopfx Angsh Workpieces Width x Thickness: mm 200 x 110 / mm 245 x 80 / mm 275 x 50 / mm 300 x 14 With: CNC, pusher feeding system, pneumatic tail clamp, outfeeding with motorized conveyoring carpet No. 1 Working unit (Circular Saw, max diameter mm 450/500) power Kw 4,6 (ca.) 200037B) CNC Double-end rouding Tenoning + mortising machine "BALESTRINI-CMS" Fox Lynk Workpieces Width x Thickness: MIN. mm 38 x 20 / MAX. mm 75 x 25 With: CN, hooper-feeder, out-feeding movable pusher No. 2 Working Units: 1st with shaping (tenons) + drilling (mortises) / 2nd with shaping (tenons) 200037C) Automatic Glue applicator "GANNOMAT" Mod. Injecta II No. 2 Glue injecting units: 1 at left-hand + 1 at right-hand 200037D) Rotary Cope and Stick Door Clamp "DOUCET" Mod. RDM-TM 5 30-72 Machine designed for quick and accurate assembly, clamping and squaring of cabinet doors With 5 stations, to assembly large pantry doors up to mm 750x1800 down to drawer fronts mm 137x312

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, operating hours: 500 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 800 mm, control type: CNC control, roller diameter: 500 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,500 mm, total length: 13,000 mm, total width: 6,000 mm, overall weight: 10,000 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, rotational speed infinitely variable, Here is the English translation: Complete Pegas Gonda Cutting Center with Pegas 540 Horizont X-CNC Band Saw We offer for sale a fully equipped Pegas Gonda cutting center, which has been used as our presentation, testing, and demonstration workplace at our production facility in Slavkov u Brna, Czech Republic. Pegas Gonda is a manufacturer of Pegas band saws and a supplier of complete cutting lines, including material handling systems – from the entry of bars into the saw to the sorting of finished cut pieces after the saw. The offered workplace has been in operation for approximately 3 years. We are offering the line as used equipment because our development continues, and we will be installing the latest version of the system with a new control system. The cutting center is designed for cutting semi-finished materials with a maximum input material length of 6,000 mm. The maximum material cross-section is 500 × 800 mm for straight cuts and 500 × 500 mm for mitre cuts. The line includes a Pegas 540 Horizont X-CNC band saw with a Siemens S7-1500 control system. At the saw output, there is an integrated conveyor system with a length of approximately 50 m, including a lateral transfer system for finished pieces into 3 buffer zones for subsequent collection of the cut material. Main parameters and equipment: * Complete automated Pegas Gonda cutting center * Pegas 540 Horizont X-CNC band saw * Siemens S7-1500 control system * Input material length up to 6,000 mm * Maximum cross-section for straight cuts: 500 × 800 mm * Maximum cross-section for mitre cuts: 500 × 500 mm * Integrated material handling system Gusdozil Shjpfx Angeh * Output conveyor system with a length of approx. 50 m * Lateral transfer of finished pieces * 3 buffer zones for sorting and collection of finished pieces * Used as a demonstration, testing, and presentation center * Location: Slavkov u Brna, Czech Republic The equipment is suitable for companies looking for a complete solution for automated cutting of bar material, including handling and sorting of finished cut pieces after the saw. Inspection of the equipment is possible by prior arrangement at the Pegas Gonda production facility in Slavkov u Brna, Czech Republic. I can further modify it into a more commercial, shorter, or technical version suitable for Machineseeker if needed.

Year of construction: 2013, condition: used, 1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equipped with 15inch touchscreen, USB and Ethernet interface as well as direct processing of prepress data on the machine control without additional hardware, CIP 3 ready, CIP 4 optional. Including spare parts package with wear parts. External compressed air connection with 6bar required. The system is in very good condition. Sale preferably as a complete system. Documentation available. An on-site inspection is possible by appointment. Gusdpjzz Iq Rofx Angjh

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 90L0865829G_00, overall weight: 1,000 kg, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, The CMS Proxima is an automatic horizontal edging machine (dry edging machine) from CMS Glass Technology for processing glass edges. Processing length: The maximum working length per cycle is approximately 2.6 to 2.7 meters (larger panes can be accommodated). Guedpfx Anez E Axzegjh Glass thickness: Can process glass from approximately 4 to 19 mm. It can be operated either as a stand-alone unit (with a simple setup table) or in combination with tilting float cutting tables or laminated safety glass (VSG) cutting tables.

Condition: used, Year of construction: 2003, Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data - Capacity: 40,000 bph (at 0,25L) - Bottle Formats: 0.25L, 0.33L, 0,5L - Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  - Application: beer, CSD, or other beverages in non-returnable glass bottles - Hygienic design - Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or Carton Palletiser | Sidel / SIG Simonazzi | 2003 | LINEAR Pallet Shrinkwrapper | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Pallet Labeller | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Basket Erector | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Fourpack Transport and Divider | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Basket Inserter | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Carton Packer | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Carton Closer | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Carton Marker 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Carton Marker 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Weight Checker | Prisma | 2003 | 10D3 Full Carton Inspection | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Bottle Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Carton Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Crown Cork Feeder | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Filler | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Godpfxoyb Tucj Angjuh Crowner | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Fill Height Control | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Tunnel/Bottle Pasteuriser | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Bottle Coding on Necklabel | Mundi-Technology | 2015 | Mundiscan UP2000 HE Labeller | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Type 407 Bottle Inspection & Sorting | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat type 707 Tap tone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone 500 Series

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Gujdpsxdi Agsfx Angsh

Condition: used, The CAT 500 cutting center is an automatic machine designed for cutting PVC profiles using a circular saw. The numerical control unit, together with the management software, allows the programming of machining parameters, leaving the operator with the sole task of loading the bars and unloading the finished pieces. Cutting type: 45° / 90° cutting (left) Adjustable angle cutting Blade specifications: Bore: Ø 30 mm Diameter: Ø 500 mm Speed: 3000 rpm Max thickness: 4.2 mm Technical data: Voltage: 380–400 V AC3PE Current: 8 A Frequency: 50 Hz Power: 3.8 kW Air pressure: 7 bar Gsdey I Twfjpfx Angouh Weight: 2300 kg Standard accessories: Carbide blade Ø 500 mm (Ø30 bore) Electro-welded steel structure with leveling feet and floor anchoring Industrial PC on board the machine Motorized profile pusher with brushless motor Motorized blade rotation (left) with brushless motor Feeding belts with inverter and acceleration/deceleration ramps Label printer Dimensions: Loader: 7900 mm MC: 1000 mm Unloading: 2600 mm Pusher: 6500 mm Max width: 2300 mm Max height: 1700 mm

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm strip thickness: 3 mm coil weight: 10 t Guedpfxoqw Akmo Angeh

Year of construction: 1985, condition: excellent (used), strip width: max. 1.500 mm strip thickness: 0,3 - 2 mm coil weight: 6 t Guodpenfu Icefx Angoh mandrel Ø: 508 mm No. of slits: max. 9

Condition: good (used), • Type: 131BMK • Serial number: GG50KB-6431 • Glass thickness 2-18 mm • With cutting optimization Gedpfx Aneq Apa Hogeuh • Can only make straight cuts • Max. glass size 2550 x 3300 mm • With air cushion + breaking bars • Tiltable • Completely overhauled – also with new felt • Year of manufacture - 2000 • Weight: 1800 kg • Includes new computer • Electrical specifications: 11.4kW, 50Hz, 380V • Price on request

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 300 kg, warranty duration: 12 months, Glass processing / assembly table. Dimensions 280 cm x 186 cm. Table lifted by gas springs. Covered with glass felt. Table on wheels - mobile. We recommend our other products for the glass industry. Guedsgk Ay Hjpfx Angoh

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 450 kg, warranty duration: 12 months, Glass processing / assembly table. Dimensions 340 cm x 240 cm. Table lifted by gas springs. Covered with glass felt. Table on wheels - mobile. We recommend our other products for the glass industry. Gsdpfxogk A Eko Angouh

Condition: used, Year of construction: 2010, functionality: fully functional, BOTTERO CUTTING LINE BOTTERO 545 VSXE-46 - Year 2010 Max dimensions: 4600 x 3210 mm Min dimensions: 150 x 125 mm Thickness: - Monolithic: 3-8 mm - Laminated (2 + 2) – (8 + 8) + BOTTERO 101 BLC-J – Year 2010 Jumbo Guedpsy E I A Rjfx Angoh Loading table Tilting function

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Gjdsz Ru Iyspfx Angouh Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Condition: Used Gsdpfxjywd Ako Angouh Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Year of construction: 2016, condition: good (used), CMC PROFI-LINE R-320 Rotary / Semi-Rotary Label Die-Cutting & Finishing Machine 320 mm | Servo Technology | Register Die-Cutting | Rewinding | Professional Label Finishing Dear Sir or Madam, we are pleased to offer the following CMC PROFI-LINE R-320, a professional rotary die-cutting and label finishing machine designed for the converting of self-adhesive labels and narrow-web materials. The machine was manufactured in 2016 and offers a compact yet highly functional configuration for professional label production. With a working width in the 320 mm class, servo-controlled web transport, register-controlled die-cutting, and several winding positions, the machine represents an attractive solution for label converters looking for a flexible finishing system for digitally or conventionally printed label material. The machine is currently installed and can be inspected by prior appointment. _____ MACHINE DETAILS Manufacturer: CMC Maschinenbau GmbH Model: PROFI-LINE R-320 Machine type: Rotary Die-Cutting / Label Finishing Machine Year: 2016 Machine No.: 100 586 Working width: approx. 320 mm Electrical supply: 400 V Frequency: 50 Hz Installed power: 20.5 kW Maximum machine speed according to machine plate: 90 m/min Machine weight: approx. 1,800 kg CE marked _____ DIE-CUTTING SYSTEM The machine is equipped with a professional rotary die-cutting section suitable for the finishing of printed self-adhesive label materials. Visible equipment includes: • Rotary die-cutting station • Magnetic cylinder system • Counter-pressure cylinder • Adjustable die pressure • Heavy-duty die-cutting frame • Servo-controlled material transport • Register-controlled production • Suitable for printed label webs • Matrix / waste separation The machine is particularly suitable for the finishing of digitally printed labels where precise die-cutting registration is required. Guodpfx Anoz Ea N Regsh _____ REGISTER CONTROL The machine is equipped for register-controlled operation, allowing the die-cutting process to follow pre-printed material. This makes the machine suitable for: • Digital label production • Flexographically printed labels • Pre-printed self-adhesive materials • Short- and medium-run label finishing The servo-controlled system helps maintain stable web positioning during production. _____ WEB HANDLING The machine is equipped with an extensive web path and several web-handling components. Visible on the machine: • Electronic web guiding system • Web guide sensor • Multiple guide rollers • Controlled material feed • Adjustable web tension • Pneumatic shafts • Several rewinding / waste winding positions The web guiding system contributes to precise material alignment before and during the die-cutting process. _____ UNWINDING The machine includes a professional unwind section for roll-fed production. Features visible on the machine include: • Pneumatic unwind shaft • Roll-fed material handling • Controlled web tension • Adjustable web path • Material guiding system The machine is suitable for typical labelstock, paper and film-based self-adhesive materials. _____ REWINDING

Condition: excellent (used), 1x Tromp line. Hybrid Line with Rondo dual servo guilllotine, capable of 200 cuts/hr or 80 stamps/min. Gjdpfxoy Enwhe Angjuh Comprising of main line pastry cutting marking discs, burgess calibrator with 2 flour dusters, rondo marker, cutter unit, hand crimped cutter and sensor, tromp depositor with stairs, rondo guillotine and cutters and dockers, portable scrap pastry unit, wire belt take off conveyor, 3 chain take off conveyor, hugging conveyor, topping machine with stand, 6 lane forming box, product divider, 2 off drum pastry cutters (foils) 1 off marker unit (chevron) Main panel Tromp (office), Main Panel Rondo, HMI Panel Tromp, HMI panel rondo, 3 off single step stands.

Condition: used, Year of construction: 2019, LISEC INSULATED GLASS LINE – Year 2019 LISEC INSULATED GLASS LINE H 2500 mm L/R Max. glass size: H 2500 x 3500 mm Min. glass size: 350 x 180 mm Glass unit thickness: 12-80 mm Shapes: according to Lisec catalog Gjdpjzpwf Hefx Angeuh Thickness of flexible spacer: 8-25 mm Consisting of: LISEC VHW-D25/V6 - automatic vertical washing and drying system for flat glass sheets Brush configuration: 6 brushes LISEC RSVN-35/25U - automatic vertical inspection and positioning station for spacer frames LISEC VSA-35/25 - fully automatic vertical system for applying flexible spacers LISEC SSV-25 - automatic robot for sealing and closing the last corner LISEC FPS-35/25U2B - Fully automatic vertical press for laminating, flat pressing, and gas filling (argon or krypton) LISEC VL-1N/25 - Fully automatic vertical extrusion and sealing robot LISEC DOS-1 TH Mixing and Metering Unit

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: * Automatic hot and cold cutting Guedpfx Anez Nyv Tsgeh * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder * Original operating manual * Additional accessories and parts shown in the photographs Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. The machine is used but remains in very good overall condition, with normal signs of industrial use. Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 * Purchase date: February 2025 * Condition: Used, fully functional * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. Gsdohzbipepfx Angouh - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm Gsdpfx Ajytvyfsngjuh - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm