Used Fliegl Tridem-Plattform Anhänger Tps 300 Bau for sale (16,017)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 12,800 kg, maximum load weight: 44,200 kg, overall weight: 57,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis, Low-Loader, Semi-Trailer Steel welded construction, turntable with interchangeable 2 kingpin and 2 kingpin positions 24 tons, 2-speed lowering jacks, single-person operation Rear supports, foldable 2 chock blocks with holders Aluminum side impact protection 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening sections to 3,000 mm Storage compartment for wooden planks on the gooseneck, front and transverse Wooden planks, 70 mm for widening to 3,000 mm Telescopic extension Central tube frame in cleanly welded, interlocking telescopic frame sections. Extendable by a maximum of 6,000 mm and lockable approximately every 1,000 mm Locking with mechanical pin lock With sliding table Tie-down points, low-loader 2 pairs of ring-type tie-down points, each 5 tons, at the front on the gooseneck. 11 pairs of tie-down eyes recessed on the top and side in the outer frame, each 10 tons, 2 x on the gooseneck, 9 x distributed in the low-loader area. First tie-down point 250 mm from the front, last one max. 250 mm from the rear, distance between tie-down points not greater than 1,100 mm 8 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, (convertible to 5-ton ring-type tie-down points, not included in the scope of delivery) Iiedpfji Ri Hnsx Aquoc 3 pairs of folding tie-down points additionally recessed in the low-loader area, each 10 tons, 1 x at the beginning of the low-bed, 1 x in front of the 1st axle, and 1 x behind the 3rd axle Axles + Suspension SAF drum brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption Last 2 axles steered, with automatic reverse steering lock via reverse light and manual locking function via a hand button on the vehicle. Air suspension with lift and lower valve Wheels and Tires 235 / 75 R 17.5, manufacturer Fulda Steel rims in twin configuration, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on a screen in the cab. Truck must be appropriately prepared, no truck installed (no calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting cable EBS, Electronic Braking System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED rotating beacon with holder, switched via parking lights (light can be removed) 2 pairs of warning panels, double LED illuminated, and extendable to 3,000 mm 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel/diamond plate covering Storage box recessed in the ramp to the gooseneck Followed by 70 mm softwood flooring, steel/diamond plate covering in the wheel arch area Rear ramp with 70 mm softwood flooring Side Walls 25 mm aluminum hollow profile, 400 mm high, front and side on the gooseneck, pluggable Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally movable Covered with wood Hydraulically operated via tractor's auxiliary drive with throttle Hy

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, in a basic lightweight design, drawbar plate with 2 interchangeable kingpins Curved front closure, patented 24 tons, 2-speed landing gear, single-sided operation, with a straight lower part, without thrust compensation Underrun protection, foldable Half-shell fenders Tow hitch at the rear Axles + suspension SAF disc brake axles with a 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rusting Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 keyed coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with raising and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the tractor unit's display, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side marker lights") 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole keyed sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw fitting, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Steel round tipper body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders and a ladder on the front wall. Greenline - conical and aerodynamic tipper body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a pivoting flap with a double-hinge hinge, externally mounted with 2-fold hook lock. 2 clamping screws with cam locks on the sides at the bottom. Side walls are continuously 4 mm thick, floor is 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with ladder, connecting plate for air/electricity and brakes with ample space for optimal operation. Rolltarp, one-sided for storage on the right, with central locking on the left Registration country/signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline prepared for license plate holder, single-row Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rusting Iisdpfei Ri Nfox Aqujc Support legs, black coated Tipper body, RAL color of your choice, solid color Rolltarp, RAL color of your choice, solid color Available in a thermally insulated version!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,230 mm, suspension: air, tire size: 385/65R22,5², tire condition: 100 %, Customized transport solution Isdei Ri H Ijpfx Aqujic Configure according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information Chassis Fine-grain steel welded construction, lightweight design, fifth wheel plate with 2 interchangeable kingpins Curved front panel, patented Telescopic support in the center, uncoupling not possible while loaded; when uncoupled, the vehicle must be tilted backward. 2 chock blocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface repels stones With anti-splash flaps, only on the last axle 1 tarpaulin rod with holder 2 towing hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles, off-road version Air suspension 1st axle, automatic lift axle, including forced lowering & start assist; activated 3 times via the brakes (start assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle driving stability system Automatic tilting lowering + shut-off valve Wheels + Tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm Actuation via hydraulic system connected to the truck's auxiliary drive Tippers Aluminum tipper body made of high-quality, abrasion-resistant material, front panel 5 mm thick, with externally mounted side walls made of 30 mm hollow profile, neatly welded, with a top profile that prevents spillage. Inside with a ladder on the front panel. Shovel and broom holder on the outside of the front panel Greenline - tapered and aerodynamic tipper body shape Membrane - rear wall Rear wall as a hinged flap with double-joint hinge, mounted on the outside with a double hook lock. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Floor, continuous 6 mm thick Standing platform with ladder, connecting plate for air/electric and brake, with large clearance for best possible operation. Roll tarp, can be stored on the right side, with central locking on the left side. Operating instructions For transport of salt, lime, etc., we recommend a tilting cylinder with a hard-chrome plated piston rod to protect against rust. The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support/fifth wheel loads (poor driving and handling characteristics possible due to incorrect load distribution). Country of registration/signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour mar

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,100 kg, maximum load weight: 33,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,400 mm, loading space height: 1,750 mm, loading space volume: 40 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,340 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. More information Chassis, tipper, semi-trailer Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front end, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 wheel chocks + holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface resistant to stone chipping with anti-splash flaps on the last axle 1 tarpaulin rod with holder 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, incl. forced lowering + starting aid, actuation via 3x brake Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line Iijdpfei Rixyox Aquec EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system Wheels and tires 385/65R22.5, manufacturer's choice Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the tractor unit, via EBS, without truck installation (this must be available in the truck. Only on basic tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side linked to the turn signal "flashing side lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw connection, fixed part, NW 48 mm. Actuation hydraulically via truck PTO Dump body Aluminum box dump body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow profile, cleanly welded, with top edge profile that prevents material from spilling. Inside with steps on the front wall (not in conjunction with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - tapered and aerodynamic dump body shape Membrane - rear wall Rear wall as a swing gate with double-hinge hinge, externally mounted with double hook locking. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with steps, connection plate for air/electrical and brake connections with large clearance for best possible operability. Rollover cover, one-sided for stowing on the right, with central locking on the left Approval country/plates Germany Test approval according to EC 2007/46 24/7 service hotline prepared for license plate holder, single-row Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust-through" Support legs, black coated Dump body, aluminum, natural Rollover cover, RAL 7035 l

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 1,900 kg, maximum load weight: 18,100 kg, overall weight: 20 kg, axle configuration: 1 axle, total length: 7,650 mm, total width: 2,550 mm, tire size: 385 / 65 r 22,5, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins, 2 pairs of removable guide rollers 4 container locks with robust outriggers on a 20-foot basis for swap bodies 7.45 and 7.82 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without push compensation, detaching under load is only possible with even load distribution! 2 support wedges with holder Side underrun protection, aluminum Rear underrun protection, steel, galvanized Half-shell fenders with anti-splash flaps Axle + Suspension SAF disc brake axle, with 430 mm disc diameter, Air suspension with lift and lower valve, with holding function for lift and lower Wheels and Tires 385 / 65 R 22.5 from leading manufacturers Steel rims, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads in the front, without connecting line EBS, electronic braking system with EBS socket in the front, without connecting cable Attention: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights in the front 2 white/red marker lights in the rear 2 x 7-pole fail-safe sockets in the front, without connecting cable Approval / Signage Iiodpfxoi Rixns Aquec Country of approval: Germany with Dekra approval and certificate (according to §13 EG - FGV) prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side and red on the rear Warning sign according to ECE - 70 Paint finish Frame DB novagrau (a dark gray color) Support feet, black coated Attention: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, Saddle, Tipping Trailer Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpin Curved front end - Patented Telescopic support in the center, uncoupling with load is not possible, in the uncoupled state, the vehicle must be tilted backwards. Chocks with holder Under-ride guard, foldable Half-shell fenders Integrated fender holder, surface repels stones Tarp rail with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via display in the towing vehicle, via EBS, without installation in the truck (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side, linked to the turn signal "Flashing side marker lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard chrome-plated, with HDK screw socket, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of high wear-resistant HB 400/450 steel. Sloped front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder externally on the front wall Membrane - rear wall Iijdpfji Ri A Ijx Aqusc Rear wall as a hinged flap with double-joint hinge, mounted externally with double hook locking. 2 clamping screws with cam locks on the sides at the bottom. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roller tarp on one side for storage on the right side, with central locking on the left side Country of registration/signs Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single row Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame: DB 7350 Novagrau "10-year warranty against rust-through" Support legs: galvanized Body: RAL color, solid color Roller tarp: RAL 7035 light g

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,500 kg, maximum load weight: 18,700 kg, overall weight: 26,200 kg, axle configuration: 2 axles, total length: 12,400 mm, total width: 2,550 mm, tire size: 205 / 65 r 17,5, Further information Chassis semitrailer forwarding Welded fine-grained steel construction, fifth wheel plate with replaceable 2 kingpins, rear bevel to approx. 1920 mm, suspension bar for ramps at the rear and front on gooseneck, grinding rollers at the rear, drop center after cranking up to the axle unit. Drawing approval required from customer in case of order! Pair of lashing lugs at the top and side of the outer frame, 10 tons each Pair of lashing eyes embedded in the outer frame on gooseneck, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Folding rear support, mounted on the outside Wheel chocks with holder Aluminum side collision protection Steel underride guard for EG, if technically possible Quarter-shell mudguards with anti-spray flaps according to EG 1 pair of wheel recesses after gooseneck recessed in the low bed of the tramline area, sloping towards the entrance. Length at bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on rear slope. Depth approx. 200 mm. Note! Frame in main beam area 200 mm higher than wheel recess. In the event of an order, a precise technical inspection is still required. Wheel recess cover can be pulled out from the drop deck with hardwood inserts, on rear slope with hardwood inserts. Electric cable winch, 24 volt, pulling force 5500 kg, mounted in the offset gooseneck, not reaching into the loading area, operation with radio remote control, operation with radio remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller on rear slope. Axles + suspension SAF or BPW drum brake axles of our choice Air suspension with lift & lower valve + auto-reset function Wheels and tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 to tire load capacity at max. 90 km/h at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS make Haldex, electronic brake system with EBS socket at the front, without connecting cable (sent to the customer for approval brake calculation.15.07.2021) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS-Canbus signal, for display via display in the cab, truck must be prepared accordingly, no truck instal. (no calibrated scales) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front Iiodpfei Ri Hrsx Aquec 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / checker plate covering 30 mm screen-printed floor, in the drop floor between the longitudinal beams in the middleIn the tramline area covered with toothed grating in the wheel recesses with steel/checker plate covering. Access ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg Pair of steel ramps for entering the drop deck Pair of steel ramps for crossing on gooseneck Drop sides Approval / plates Country of approval: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Prepared for single-line license plate holder Contour markings with reflective strips to ECE R 048, yellow at the sides and red at the rear Warning sign according to ECE -

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6,750 kg, maximum load weight: 32,250 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,950 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,670 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, saddle, tipper Fine-grain steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 king pin Curved front end, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Wheel chocks with holder Rear underrun protection, foldable Half-shell fenders Ijdpsi Rizfsfx Aquoic Integrated fender holder, surface resistant to stone chipping Tarp pole with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and start-up assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lift and lower valve Vehicle - Driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the towing vehicle's display, via EBS, without installation in the truck (this must be a prerequisite in the truck. Only on standard tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, coupled with the turn signal ("Flashing side lights") 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel side body made of high-wear-resistant HB 400 steel, sloping front wall with externally mounted hydraulic cylinder mounting. Shovel and broom holder on the outside of the front wall. Interior with ladder on the front wall. Side walls continuously 3 mm thick, floor continuously 3 mm thick Membrane - rear wall Interior width at the bottom approx. 1440 mm Aluminum rear wall, pendulum-mounted with "double-hinge hinge" and with a 2-flap door, split 1/2 to 1/2, with a pivoting bar at the top, with one grain slide per door. Standing platform with ladder, connection plate for air/electrical and brake with large space for the best possible operability. Rollover tarp on one side for placement on the right, with central locking on the left Country of approval/signs Germany Type approval according to EG 2007/46 Superstructure strength according to EN 12642 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau "10-year warranty against rust-through" Body RAL color, solid color Rollover tarp RAL 7035 light gray

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis, tipper semi-trailer Fine-grain steel welded construction, in basic lightweight design, turntable with interchangeable 2 kingpin Curved front panel, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without shock absorption Underrun protection, foldable Partial fender Tow hitch at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1. axle, automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS, without installation in the truck (this must be available in the truck. Only on base tires) Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part, NW 48 mm (without hose connection) Iisdji Ri Niopfx Aqujc Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder externally on the front wall. Membrane - rear wall Rear wall as a swing gate with double-joint hinge, externally supported with double hook locking. 2 clamping screws with cam closures on the lower sides. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with ladder, connection plate for air/electricity and brake with large space for best possible operation. Rollover tarpaulin, single-sided for depositing on the right, with central locking on the left Approval country / signs Germany with Dekra approval and certificate (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau 10-year warranty against rust-through Support legs, black coated Body, RAL color of your choice, single color, subject to availability Rollover tarpaulin, RAL color of your choice, single color Also available with hydraulic rear wall

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 32,400 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 1,295 mm, total length: 12,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions Front locking on tipping cylinder support with locking on both sides, including tapered wedges Rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container supports: Locking crossbeam, 2-fold for locking 1 x 30 ft or 1 x 40 ft container. Adjustment via central telescope as an interlocking central tube frame with bolt locking. Optimal kingpin load when transporting 30 ft and 40 ft containers. 24 tons, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Half-shell mudguards with anti-splash flaps according to EC Hydraulics 100 low-pressure cylinder max. 150 bar, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Actuation hydraulically via truck auxiliary drive, including Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Offset axle distance mm (combined transport) up to 44 tons total weight Air suspension Braking system 170 2-line pneumatic braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connecting cable EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! Isdpfsi Riv Eox Aqujic with lifting and lowering valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be prepared accordingly Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 31,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R 22,5, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information Chassis, semi-trailer, tipper Fine-grain steel welded construction, lightweight design, with slight curvature, kingpin plate with replaceable 2" kingpin 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without shock absorption Wheel chocks with holder Iisdpfji Rizqjx Aqujc Underrun protection, foldable Half-shell fenders Integrated fender holder, surface resistant to stone chipping Tarpaulin rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy maintenance Spring-loaded parking brake 2 tamper-proof coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the tractor unit, via EBS, without truck installation (this must be available in the truck. Only for standard tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side, linked to the turn signal "Flashing side lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole tamper-proof sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel side body made of high-wear-resistant HB 400 steel, sloping front wall with external hydraulic cylinder mount. Foldable aluminum splash guard on the right for the tarpaulin. Shovel and broom holder on the outside of the front wall. Inside with ladder on the front wall. Side walls continuously 4 mm thick, floor continuously 5 mm thick Membrane - Rear wall Rear wall with 2-wing door division 1/2 to 1/2, with 1 slide in the right wing. With externally mounted torsion bar lock and mechanical locking at the bottom. Standing platform with ladder, connection plate for air/electricity and brake with ample space for best possible operation. Roll cover on one side for depositing on the right, with central locking on the left Country of registration / Signs Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau 10-year warranty against rust-through Support feet, black coated Body, RAL color of your choice, solid color Roll cover, RAL 7035 light gray

Condition: used, maximum load weight: 2,775 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 3,530 mm, loading space width: 1,650 mm, total width: 2,435 mm, total height: 2,130 mm, A15 GW26MG00273 Iiodpfxsym Ihze Aqujc Construction machinery transporter, Manufacturer A, model BMAT, gross weight: 3,500 kg, low-loader, overrun braked, 100 km/h, with aluminium ramps, 3.53 m x 1.65 m ...and much more. Subject to errors and prior sale.

Condition: used, maximum load weight: 2,150 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 02/2022, total width: 2,150 mm, total height: 890 mm, Temared trailer Winch 3 axles First registration / Year of manufacture: 17.02.2022 / Vehicle type: Semi-trailer Body type: Platform KBA No. (HSN/ TSN): 1897//000 Paint color: Silver Iisdpfx Aey Dyz Ajquoc Number of previous owners: 1---- The vehicle is unprepared! Nationwide delivery available for an additional charge. Errors and prior sale reserved. We are happy to take your vehicle in part exchange. Financing / leasing also available with no down payment! Do you have questions? We are happy to advise you!

Condition: used, maximum load weight: 2,775 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 3,530 mm, loading space width: 1,650 mm, total width: 2,435 mm, total height: 2,130 mm, A15 GW26NG00315 Construction machinery transporter, manufacturer STEMA, model BMAT, total weight: 3,500 kg, low-loader, with overrun brake, 100 km/h, equipped with aluminium ramps, 3.53 m x 1.65 m ...and much more. Subject to errors and prior sale. Loading height: 500 mm. Iodpfx Aqsym Ifteusic

Condition: used, maximum load weight: 2,649 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,005 mm, loading space width: 1,800 mm, total width: 2,435 mm, total height: 2,130 mm, A14 GW26GA00002 Construction machinery transporter by STEMA, model BMAT .2, gross weight: 3,500 kg, low-loader, with overrun brake, 100 km/h, equipped with steel ramps, tiltable, 4 m x 1.80 m ...and much more. Errors and interim sale excepted. Ijdpfx Aoym Ifajqusic

Condition: ready for operation (used), Deutronic DX 3000 / 3-CAN-60-DIV built-in power supply Condition: 1 Serial number: 92037202009 / Input: 400-500 V~ / 45-65Hz Output: 0-60 VDC 0-50 A, used, in good condition, 100% functional, scope of delivery as per photos Ijdsy Rcktepfx Aqujic

Condition: ready for operation (used), Philips fan assembly for Philips 4022 226 4230 NC 9418 830 01701 Rack, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Iodsi Eckmspfx Aqueic

Condition: ready for operation (used), Deutronic DX 3000 / 3-CAN-60-DIV built-in power supply Condition: 1 Serial number: 9122080017, used, in good condition, 100% functional, scope of delivery as shown in photos. Iedpfx Aqjy Srnkoujic

Condition: ready for operation (used), Philips fan assembly for Philips 4022 226 4230 NC 9418 830 01201 rack, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Iedpfxsi Eckio Aqueic

Condition: ready for operation (used), Deutronic DX 3000 / 3-CAN-60-DIV built-in power supply, condition: 1, serial number: 9122080016 / input: 400-500 V~ / 45-65Hz, output: 0-60 VDC, 0-50 A, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Iiedpfx Aqsy Rckmjuoc

Condition: new, GMN TSE 240 cg - SP: 3000-3600-4000-5000 rpm / 37 mounted grinding spindle, shaft diameter: 130mm, step at the front of the thread: 102mm, with test report and installation declaration, new value: €25,000, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Iedpfji D U Trjx Aqujic

Condition: ready for operation (used), Philips fan assembly for Philips 4022 226 4230 NC 9418 830 01711 Rack, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Iedpfei Eckqex Aqujic

Condition: used, empty load weight: 5,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2018, total length: 2,550 mm, total height: 13,100 mm, suspension: air, tire size: 385/65R22,5, | Fliegl 30-foot tipping chassis | BPW axles | Lift axle | Alloy wheels | Top condition | Austrian vehicle Isdoyp Hd Hspfx Aqueic

Condition: new, empty load weight: 3,770 kg, maximum load weight: 14,230 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,600 mm, suspension: air, tire size: 385/55 R22,5, Equipment: ABS, | Krone AZP 18 building material trailer | BPW axles with disc brakes | Spare wheel holder | 2x toolbox | Loading dimensions: L 6.50 m W 2.48 m | Side wall height: 1.00 m | Tires: 385/55 R22.5 | Perforated outer frame | Adjustable drawbar Seller: Christopher Glock German/English Mobile: Whatsapp) Mail: christopher. Entire stock at: Hofgasse25, A-4063 Hörsching | Errors, input and pre-sales reserved. | Sale only to commercial customers Iiedsytti Dopfx Aquoc

Condition: new, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, suspension: air, tire size: 275/70R22,5, Equipment: ABS, | Schwarzmüller Jumbo building materials trailer | BPW axles with disc brakes | Pallet box, 2x stainless steel tool box, | Rear storage compartment 600x400x2.900 | side wall height 1.00m front wall height: 1.40m | loading dimensions: 7.10mx2.48m | aluminum rims XLite | tires 275/70R22.5 twin tires | plastic tarpaulin with rubber bands, | aluminum storage tray and front step bar, | subject to errors, input errors and prior sale. Iiodpfx Aqetuwbpsuoc