Used Fliegl Sds 390, Bpw-Scheibenbremse, Liftachse, Coil, De for sale (23,189)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 8,685 mm, total width: 2,550 mm, total height: 3,970 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis: Center axle trailer Fine-grained steel welded construction Outer frame slightly angled with "Load-Lock profile" for attaching tie-down straps. Note: To attach the straps, the side panels must be opened! "Vario-Lash" lashing rings for use in the "Load-Lock profile", 2.5 tons each, loose Gear-supported front legs, with a straight lower part and single-sided operation on the right Telescopic rear support Retractable ladder at the rear Door latch on the side Chocks with holder Aluminum side impact protection Steel underrun protection Quarter panel fenders in front of and behind each axle Rear impact protection Plastic toolbox with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Coupling device for center axle trailer, according to customer requirements Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy maintenance Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle EBS, electronic braking system with EBS plug at the front, with connection cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle – driving stability system Wheels and tires 385/65 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length approx. 6,900 mm Front bulkhead / corner posts at the front 2,580 mm high, steel corner posts in a full-volume design, release mechanism for side tarpaulin on the front bulkhead Center posts Sliding posts, can be moved along the entire length, with 4-fold insertion pockets and a long pocket at the bottom Insertion slats Rows of aluminum V-insertion slats Rear bulkhead / corner posts at the rear Rear corner posts, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioner Iaedpfx Agszcqh Njmou Rear portal doors, 2-wing, each with 2 internal rotating bar locks Tarpaulin Tarpaulin with welded horizontal and vertical straps Tensioners made of stainless steel Customer lettering on side tarpaulins and rear portal possible Roof Fixed roof with tarpaulin and bows, tarpaulin color: white Optimal rain gutter at the rear, at the top of the end bow, above the doors Registration country / signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Load securing certificate according to EN 12642 XL 24/7 service hotline prepared for license plate holder, single row Reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the corners (if visible side panels, then the strip at the bottom, on the side panels) Reflective strips: red, around the rear portal *also available as a drive-through version Customized transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 8,600 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,480 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Type: TPS 118 Logistics Semi-Trailer Chassis: Central Axle Trailer Outer frame slightly inclined, new design with "Load-Lock profile" for securing tie-down straps 2-speed gear support leg at the front Plastic toolbox Platform height: 1080 mm Coupling: Central axle trailer Drawbar with tested 40 mm drawbar eye, logistics version Drawbar mechanically adjustable in height via threaded spindle, below floor level, max. adjustment range 200 mm Drawbar mechanically adjustable in length from approx. 1950 - 2300 mm, can be mechanically locked at approx. 50 mm intervals, drawbar length set to approx. 2100 mm Axles & Suspension SAF/BPW axles, selectable by the manufacturer "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking System 2-line pneumatic braking system Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle 24 Volt EBS, electronic braking system with EBS plug at the front, with connection cable with raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 4x 235/75 R17.5, brand selectable by the manufacturer 4x steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length: approx. 7,300 mm Superstructure Front wall / corner posts at the front Through-loading system with front portal doors, 2-leaf, each with 2 internal rotary bolt locks, corner posts made of steel, release mechanism for side tarpaulin Ramp, approx. 2,400 mm wide, 1 x divided, approx. 350 mm long for resting on the tailgate, load capacity approx. 1,800 kg, incl. support for the tailgate (drawbar length then approx. 2100 mm, for tailgate length of 1800 mm, the coupling offset from the truck must be at least 20 to max. 240 mm). Note! Usable internal length is reduced by the ramp! Side Walls Isdpfszcp E Tox Agmoau Center Rails 2 pairs of sliding rails that can be moved along the entire length, with 4 pockets and a long pocket at the bottom Insert strips 5 rows of wooden insert strips (in combination with side walls, 4 rows) Rear Wall / Corner Posts at the Rear Corner posts at the rear made of steel, extending to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf, each with 2 internal rotary bolt locks Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning fasteners made of stainless steel Customer lettering on side tarpaulins and rear portal possible Roof Sliding tarpaulin, rear end lift that can be folded up, with the tarpaulin sliding from back to front, tarpaulin color: white Optimal rain gutter at the rear, above at the end beam, above the doors Country of Registration / License Plates Germany with Dekra approval and certificate (according to §13 EG - FGV) Fliegl manufacturer certificate for the structural strength of the superstructure according to EN 12642 XL prepared for single-line license plate holder Reflective strips: white, continuous on the bottom of the side tarpaulin and at the top in the corners Reflective strip

Condition: used, axle configuration: 3 axles, first registration: 05/2021, loading space length: 7,150 mm, loading space width: 2,460 mm, loading space height: 1,750 mm, suspension: air, tire size: 385/65r22.5, wheelbase: 1,310 mm, Year of construction: 2021, Tyre size: 385/65r22.5 Ijdpfx Aovxqu Regmoau Suspension: air suspension Drive: Wheel GVW: 39.000 kg Tipper: Back

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,200 kg, maximum load weight: 8,300 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 6,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, central axle trailer, low-bed Fine-grained steel welded construction Gear-supported front leg Telescopic rear support 2 chock blocks with holder Fenders made of steel sheet over both wheels Aluminum side impact protection Coupling device for central axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle 24 Volt ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable Platform TTS Low-lying steel pan, platform floor made of steel/diamond plate, steel walls welded to the floor Platform length 4500 mm Pan with "Load-Lock profile" at the front and on the sides for attaching lashing straps (8 pieces at the front, 12 pieces on each side) Note: Slight unevenness in the floor may occur due to welding distortion! 2 pairs of lashing eyes, 1 x at the front in the corners of the steel pan and 1 x at the rear in the floor, each 5 tons. Loading ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable with handrail on the ramps covered with wood (tip area with steel/diamond plate) with gas spring for single-person operation Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while observing the permissible axle/support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of registration/Signs Country of registration: Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame painted or galvanized, according to customer request Iasdpfxsi Ri Ebj Agmsu Loading ramps, hot-dip galvanized Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21001014667, empty load weight: 2,200 kg, maximum load weight: 8,300 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 6,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, Chassis: Center-axle semi-trailer, low-bed Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels Side impact protection, aluminum Coupling device for center-axle semi-trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axles/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever system) Wheels and Tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle 24 Volt ABS and ALB, with ABS plug at the front, with connecting cable Caution: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable Platform TTS Low-lying steel platform, platform floor made of steel/checkered plate, steel walls solidly welded to the floor Platform length 4500 mm Platform front and sides with "Load-Lock profile" for attaching lashing straps (8 pieces at the front, 12 pieces on each side) Note: Slight unevenness of the platform possible due to welding distortion! 2 pairs of lashing eyes, 1 x at the front in the corners of the steel platform and 1 x at the rear in the floor, 5 tons each Ramps Iasdpfszcnzaex Agmju Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handrail on the ramps covered with wood (tip area with steel/checkered plate) with gas spring for single-person operation Operating Instructions The stated total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling characteristics possible due to incorrect load distribution) Country of Approval / Signage Country of Approval: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame: Hot-dip galvanized, including passivation "15 years warranty against rust" Note: Unevenness of the floor possible due to hot-dip galvanizing! Ramps: Hot-dip galvanized Caution: The images are archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,520 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis: Central axle trailer, low loader Fine-grained steel welded construction Gear-supported front support Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels with anti-splash flaps only on the last axle Aluminum side impact protection Front crossbar that can be inserted into the floor holes Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (linkage compensation) Wheels and tires 235 / 75 R 17.5" as per manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Parking sockets for electrical wiring, ABS/EBS and air connection to the drawbar 24 Volt EBS, Electronic Braking System with EBS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side coupled with the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED Premium LED side marker lights, with "20 LED diodes per light" 2 x 7-pole fail-safe plugs at the front, with connecting cable Platform TTS low-lying steel tub, platform floor made of steel/non-slip metal plate, steel walls firmly welded to the floor Platform length 5500 mm Tub with "Load-Lock profile" at the front and on the side for attaching lashing straps (8 pieces at the front, 16 pieces on each side) 2 pairs of lashing rings, 1 x at the front in the corners of the steel tub and 1 x at the rear in the floor, each 5 tons 3 pairs of additional lashing rings in the floor, each 5 tons 4 pairs of lashing rings screwed onto the side walls Ramps Steel ramps, 2,300 mm long, 510 mm wide, can be shifted sideways with handrail on the ramps covered with wood (tip area with steel/non-slip metal plate) with gas spring for single-person operation Rear wall / rear corner posts Screen-printed panel, 400 mm high, pluggable, between ramps Operating instructions The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Country of registration / signs Country of registration: Germany Type approval according to EG 2007/46 prepared for license plate holder, single-line Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Iasdpfx Ajzcnugogmsu Warning sign according to ECE - 70 Custom-made transport solution

Condition: used, maximum load weight: 6,100 kg, overall weight: 8,900 kg, axle configuration: 2 axles, first registration: 10/1998, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 42 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 1998, 2-Axle Fliegl TPS 89 Pr.+Pl. Trailer with Drop Sides VIN: W1F20917 Chassis / Attachments: Iedpfxjy Rgyro Agmjau * Air suspension with lift/lower function * Tyres: 215/75 R17.5 * Tread depth remaining: front approx. 30/60%, rear approx. 70/40% * Spare wheel holder * 1x Haacon landing leg * 2x rear support legs Body: * Fliegl Pr.+Pl. with drop sides * 60 cm side walls * 4x lashing eyes per side * Dimensions: 6,200 mm x 2,480 mm x 3,020 mm * Approx. 68 m³, 22 pallets Weights: * Gross weight: max 8,900 kg – reduced to 4,500 kg * Unladen weight: 2,800 kg * Payload: 6,100 kg Other: * German vehicle New main inspections/safety tests or changes to weight ratings (up- or downrating) available on request. We are happy to assist with export/transfer number plates, as well as organising the transfer of your purchased vehicles within Germany. Contact us! — We speak the following languages: German, English, and Russian! — No liability for printing or typing errors. Subject to change, prior sale or errors! — Who are we? Leible Nutzfahrzeuge is a family business located in Kehl am Rhein. With our many years of experience in preparing and marketing commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge is particularly strong in the sale of new and used commercial vehicles. Our 11,000 m² premises host a wide range of vehicles. Our business philosophy is based on fairness and integrity. As customer satisfaction is very important to us, we offer an excellent all-round service package and provide you with a competent contact partner who will assist you with the purchase or sale of vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organising special transports We are happy to help you organise special transports. Short-term/export number plates We are happy to assist in obtaining export/temporary plates. Customs formalities We are happy to assist you with customs procedures.

Condition: used, empty load weight: 3,500 kg, maximum load weight: 8,300 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 10/2009, loading space length: 6,200 mm, loading space width: 2,440 mm, loading space height: 3,000 mm, suspension: air, tire size: 235/75R17,5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, tarpaulin and bows, 2-axle, tandem, air-suspended, lifting+lowering, ABS (anti-lock braking system), Edscha, lashing eyes, U-protection, front support, rear support, height-adjustable drawbar Body: Flatbed + tarpaulin Trailer for glass transport with Edscha canopy Tires approx. 50% ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Iaedsi Rpx Njpfx Agmou - .

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: BPW, SAF and others used trailer axles 6-13t, 40x available! different trailer axles for 200,- to 600,- EUR per piece depending on condition ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Iaodpfxeth T Uus Agmju

Condition: used, maximum load weight: 2,300 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 06/2015, Ref. No.: B - 06 On behalf of customer Fliegl * TTS 30-30 * Low-bed trailer * Ramps * 2-axle Iasdpfx Agexvf U Nsmou * Permissible total weight 3000kg * Very good condition, little used Trade-in possible Financing starting at 3.99% Errors and prior sale excepted! The information in this advertisement is non-binding descriptions and does not constitute guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Stated features should be checked separately. All details in the ads are non-binding! Nationwide delivery within Germany available upon request. Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment!

Condition: used, maximum load weight: 28,410 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2012, loading space length: 13,600 mm, loading space width: 2,400 mm, loading space height: 700 mm, FLIEGL flatbed semi-trailer with drop sides and 3 axles Payload: 28,410 kg TYPE: SDS350 Iodpewgghnjfx Agmsau Brakes: disc Axle: BPW + air suspension 2x landing legs (JOST) Length: 13.60 m Width: 2.40 m Height: 0.70 m We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, loading space length: 7,145 mm, loading space width: 2,750 mm, loading space height: 900 mm, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Iajdpfxeyxq A Ho Agmou Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: used, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Further information Chassis: Welded steel construction, double offset with drop deck in front of and behind axle unit, drop deck slanted towards entrance, turntable with strong ball bearing slewing ring, folding rear support, wheel chocks, side collision protection, quarter-shell mudguards Lashing eyes: above front axle: 2 pairs of ring lashing eyes per 5 tons at the front on the offset drop deck/rear axle: 6 pairs of lashing eyes laterally in the drop deck per 8 tons, 6 pairs of lashing eyes per 5 tons between the side members, pair of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 tons ring lashing eyes embedded in the floor. Ring lashing eyes embedded in the floor Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Brake system: 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads Electrical system: 24 volt, multi-chamber lights, amber lighting at the sides, 2 white position lights at the front 2 white/red lane departure lights at the rear, rotating beacon with holder, pair of warning signs illuminated and extendable to 3,000 mm, 2 x 7-pin interchangeable plugs at the front Floor: Front offset with steel / checker plate covering, storage box recessed in drive-over slope to offset, tramline area and in the middle between the beams with steel / checker plate covering, rear slope with 70 mm softwood floor, deep loading area incl. rear slope 5900 mm Drive-on ramps: Hook-in strip for aluminum ramps across the entire width. as U-profile across the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Approval: contour marking with reflective strips to ECE R 048, white at the sides and red at the rear Isdpfxsi Ri N Uo Agmeau

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, Please note that the images are archive images! The vehicle may be in use. Additional information: Chassis: Central axle semi-trailer, low-bed Fine-grained steel welded construction, geared support leg at the front, telescoping rear support, chocks with holder, mudguards made of sheet steel over both wheels Coupling device: Central axle semi-trailer Drawbar with tested 40 mm drawbar eye, drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles of our choice, with tapered roller bearings and S-cam brakes, axle/chassis laser-aligned, reducing tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Braking system 2-line compressed air braking system, spring-loaded parking brake, 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin connector at the front, with connecting cable Platform TTS low-lying steel trough, platform floor made of steel/checkered plate, steel walls welded solidly to the floor, platform length 5500 mm, trough with Load-Lock profile at the front and on the sides for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Iasdpfx Agoqmc Rajmou Note: Slight unevenness in the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel trough and 1 x at the rear in the floor, each 5 tons. Additional pair of lashing eyes in the floor, each 5 tons Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with handrail on the ramps, covered with wood, with gas spring for single-person operation Operating instructions The stated total weight is technically possible; depending on the load, the total weight may not be reached while adhering to the permissible axle/support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Registration country/signs Registration country: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Please note that the images are archive images! The vehicle may be in use.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902036248, empty load weight: 7,272 kg, maximum load weight: 27,728 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Container color: solid color, RAL color freely selectable Chassis: semi-trailer, for forwarding companies Fine-grained steel welded construction in lightweight design, up to the support legs, trailer plate with replaceable 2" kingpin 24 tons, 2-speed support winch, single-sided operation Extension ladder at the rear Door latch on the side Ijdpfx Agoza S E Remsau Folding mudguard for lighting unit Rear impact protection 1 aluminum ladder approx. 3,550 mm, with holder on the side 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Axles + suspension BPW disc brake axles with 430 mm disc diameter Air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, activated by "3x braking" Braking system 2-line compressed air braking system Spring brake parking brake 2 tamper-proof coupling heads at the front 24 Volt EBS, electronic braking system with EBS socket at the front Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS 1 additional air connection on the left rear, with quick-release coupling Wheels and tires 385/55 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side linked to the turn signal ("flashing side marker lights") 2 white position lights at the front in LED 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin tamper-proof sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light Self-tipping hydraulics Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulics. Switching between forward/reverse operation is done electrically via remote control with cable Operation hydraulically via truck PTO Hydraulic connection with hose on the front wall and HDK screw connection NW = 48 mm Self-tipping floor Sliding floor with wear plate at the rear Floorboards made of aluminum, 8 mm floor profile, ribbed design Self-tipping container Aluminum box container made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded all around at the top with a wide special reinforcing profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a 1/2 to 1/2 split, framed all around with a special U-profile with stop and rubber seal, with 2 swivel latch bars on the outside, locked at the top and bottom. Rear wall with mechanical safety locking, operated at the rear on the left in the direction of travel Standing platform with ladder on both sides in the direction of travel left/right and railing, for opening and closing the roof tarpaulin 3 removable, swiveling crossbars for tarpaulin support + tarpaulin support at the front on the front wall and at the rear on the rear wall Paint finish Frame DB 7350 Novagrau "10-year warranty against rust through" Support legs Black coated Container Aluminum natural - can be painted in RAL color according to customer's request Roof tarpaulin Not yet

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33001012559, empty load weight: 6,250 kg, maximum load weight: 17,750 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,620 mm, loading space width: 2,520 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 860 mm, suspension: air, tire size: 235 / 75 R 17,5", tire condition: 100 %, color: black, Low-bed trailer chassis: Steel welded construction, turntable with robust ball bearing, foldable rear support, 2 chocks with holder, aluminum side impact protection, splash guards at the rear covering the entire width (not in conjunction with forklift mount), half-shell wheel arches, 1st axle with anti-spray splash guard, anti-spray splash guards behind the 2nd and 3rd axles, 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock, extendable widening sections to 3,000 mm, storage compartment for wooden planks in the center of the loading area, 70 mm wooden planks for widening to 3,000 mm, lashing points for low-bed trailers, 1 pair of lashing recesses in the front longitudinal beam, recessed in the flange, 10 tons each, 4 pairs of lashing holes in the outer frame, 5 tons each (for strap attachment), 7 pairs of lashing eyes recessed in the top and side of the outer frame, 10 tons each, 1 at the front in the flange, 6 in the low bed, the first lashing point 250 mm from the front and the last max. 250 mm from the rear, distance between lashing points not greater than 1100 mm, 5 pairs of ring lashing points recessed in the outer frame, 5 tons each (convertible to pocket lashing points), 2 pairs of folding lashing points additionally, 10 tons each, 1 on the flange (protruding), 1 behind the last axle recessed in the floor, 1 pair of screw lashing points, 6.7 tons each (JDT), with large flange plate including thread as counter-holder, at the front on the flange. Trailer turntable hitch: Drawbar with tested 40 mm drawbar eye, parking sockets for electrical/ABS and air connections on the drawbar. Axles + Suspension: SAF drum brake axles, "axle/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension with lift and lower valve, operable separately at the front and rear. Wheels and Tires: 235 / 75 R 17.5", Fulda, rims: 6 x steel rims in twin arrangement, mounted on the inside; 6 x aluminum rims, polished, mounted on the outside. Braking System: 2-line compressed air braking system, spring brake parking brake, Trailer Info Center for displaying vehicle data such as axle load (not an approved scale) and odometer, vehicle stability system, axle load detection via EBS-Canbus signal for display on the dashboard in the cab, truck must be appropriately pre-equipped, 2 non-interchangeable coupling heads at the front, with connection lines to the tractor unit, EBS, electronic braking system with EBS plug at the front, with connection cable. Electrical System: 24 Volt, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED, manufacturer Aspöck EcoLED 2 with dynamic turn signal, premium LED side marker lights, 2 white position lights at the front in LED, 2 white/red marker lights at the rear in LED, 2 x 7-pole non-interchangeable plugs at the front, with connection cable, additional LED work light at the rear, 1 LED rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, LED-illuminated and extendable to 3,000 mm. Floor: Front flange with steel/diamond plate covering, storage box recessed in the ramp to the flange, followed by a 70 mm larch wood floor, steel/diamond plate covering in the wheel arch area, rear slope with 70 mm larch wood floor, low-bed area including rear slope 6,500 mm, loading ramps, steel ramps 2,800 mm long, 750 mm wide, laterally displaceable, additional ramp locking device, foldable at the bottom (to prevent lateral slippage o Iasdpfx Ajzaznzogmju

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013325, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 11/2023, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, The images shown are archive images. The vehicle may still be in use. Chassis: Central axle trailer, low-bed Fine-grained steel welded construction Gearbox support leg at the front Telescopic rear support Chocks with holder Mudguards made of steel sheet over both wheels Side impact protection, aluminum Coupling device for central axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Ijdpozadb Dofx Agmsau Euro axles of our choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker arm compensation) Wheels and Tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin connector at the front, with connecting cable Bridge TTS Low-lying steel pan, bridge floor made of steel/non-slip steel plate, steel walls solidly welded to the floor Bridge length 5500 mm Pan at the front and side with "Load-Lock profile" for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight undulation of the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel pan and 1 x at the rear in the floor, each 5 tons Additional pair of lashing eyes in the floor, each 5 tons Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handrail on the ramps covered with wood (tip area with steel/non-slip steel plate) with gas spring for single-person operation Operating instructions The specified total weight is technically possible, depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor handling and tracking behavior possible due to incorrect load distribution) Country of Registration/Signage Country of Registration: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame: RAL 5002 Ultramarine Blue Ramps: Hot-dip galvanized The images shown are archive images. The vehicle may still be in use.

Condition: used, maximum load weight: 31,410 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, You can find our entire vehicle stock with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete equipment details available upon request. - 3 SAF axles - Disc brakes - 1st axle with automatic lift axle - Air suspension Iaedpfx Agjw Tpr Uemeu - 24 t, 2-speed landing gear, single side operation - Rear extension ladder - Plastic toolbox with drawer and shelf - 2-line air brake system, EBS/ABS - 385/55 R22.5 tires - Cargo Floor moving floor, approx. 10 mm floor profile - Rear wall made of aluminum hollow profiles, double-winged door - LED work lights - Frame painted in DB 7350 Novagrau - Body painted in RAL 7035 light grey - Rolling tarp similar to RAL 3002 carmine red

Condition: used, machine/vehicle number: WFDFLT33902030059, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: black, The images shown are archive images; the vehicle may still be in use! Weights and Dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Permissible / technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer for Forwarding Fine-grain steel lightweight welded construction, up to the landing legs, fifth wheel plate with replaceable 2" king pin. Prepared lashing rings integrated into the floor (max. 13 pairs) 24-ton two-speed landing gear, single-sided operation, straight lower part, without load equaliser Pull-out ladder at rear Door retainers on the sides Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mud flaps Foldable fender for lighting unit Quarter shell mudguards Rear impact protection Axles & Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, activation via triple brake application Brake System Two-line compressed air brake system Colour-coded line routing for easier servicing Spring-loaded parking brake Two fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting cable Wheels 385/55 R22.5" Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear Iodpfewk Dc Rox Agmeau 2 x 7-pin fail-safe sockets at the front, without connecting cables SB Hydraulics Hydraulic cylinder with sliding unit integrated in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Capacity: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l SB Tipper Body Aluminum box-type tipper body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow sections, welded with a wide special reinforcement profile around the top and a special reinforcement frame at the bottom. Sliding bulkhead for improved unloading of cargo, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow sections as a two-leaf door, split 1/2 to 1/2, framed all round with a special U-profile with stop and rubber seal, fitted with two external rotary bar locks, locked at top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left side in direction of travel. Including a swivelling crossbar at the top. Standing platform with ladder access on both sides (left/right in direction of travel) and guardrail for opening and closing the roof tarpaulin Removable, swivelling crossbars for tarpaulin support + tarpaulin support at front bulkhead and at rear wall. Roll tarp can be stored on one side with two longitudinal tension belts, 3 ratchet tension belts on the side. The tarp is fastened with hooks and rubber ropes at the front bulkhead and above the rear doors; features

Condition: new, machine/vehicle number: 195f80ad09517628522e33a91, empty load weight: 7,300 kg, maximum load weight: 16,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear splash guards across the entire width Quarter-shell mudguards in front of 1st axle 1st pair of wheel recesses after cranking, recessed in the low bed in the tramline area, slanted towards the entrance, bottom length approx. 1600 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. 2nd pair of wheel recesses recessed between the axles in the low bed in the tramline area, sloping towards the entrance, bottom length approx. 600, approx. 300 mm deep. Note! Frame in main beam area 300 mm higher than wheel recess. Widenings extendable to 3,000 mm (not in rear bevel) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Widenings extendable to 3,000 mm, also in the wheel recesses below, foldable on the wheel recess extensions, (widening not in rear sloping) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of lashing cut-outs in the front side member, recessed on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable. Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed in the drive-over slope to the offset then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6500 mm Isdpoi Ri Rvefx Agmeau Drive-on ramps Steel ramps 2 800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to

Condition: new, machine/vehicle number: ede0610378cbe39cc4883251d, empty load weight: 24,000 kg, maximum load weight: 7,550 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction 1st pair of wheel recesses after steel platform recessed in the tramline area, inclined towards the entrance, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. If machines are to be driven where the overall height is to be checked, we request a technical data sheet for the machine types with exact details (if overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses may be required by the customer). Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support 2 wheel chocks with holder Aluminum side bumper Rear spray flaps across the entire width Widenings can be extended to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 110 3 pairs of lashing points, 10 tons each, integrated in the floor at the front Incl. 6 pairs of lashing mushrooms at the top and sides, each 10 tons, embedded in the outer frame 1 x to neck area remaining distributed in between Distance not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Brake system Ijdpoi Ri Ryjfx Agmsau 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles which guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Twin steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, incl. Afterwards with 70 mm softwood floor, steel/checker plate covering in the wheel housing area Rear slope with 70 mm softwood floor Low loading area incl. rear slope 8 200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. cannot be achieved. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany Incl. with

Condition: new, machine/vehicle number: 15431365fe5515297a6a9fb05, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguards 1st + 2nd axle with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axle Excavator trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons in the excavator trough on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 storage box on offset recessed in floor with lid, W=720 mm/ L=520 mm / D= 170 mm Extensions extendable to 3,000 mm Wooden planks 70 mm for widening to 3000 mm Storage compartment for wooden planks under the loading area Low loader lashing eyes (40 lashing options) 1 pair of lashing eyes on offset per 5 tons 9 pairs of lashing points at the top and sides, each 10 tons, embedded in the outer frame 2 x front on offset 7 x in the drop deck 6 pairs of lashing holes in the outer frame of the low bed, each with 5 to. (lashing strap attachment) 3 additional pairs of hinged lashing eyes, 10 tons each 1 x inside next to the main frame at the start of the low bed 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Towing equipment Trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined 8° D-value min. 160 kN Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side Iajdsi Ri A Sepfx Agmeu 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Offset at the front with steel/ checker plate flooring Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood flooring Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Attention! These are archive pictures!

Condition: new, machine/vehicle number: 628cde0fe99cc2d3c8eaa8dd8, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Extensions extendable to 3,000 mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes (40 lashing options) 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles, at the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front Iaedei Ri Ddspfx Agmou 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Attention! These are archive pictures!

Condition: used, axle configuration: 3 axles, first registration: 09/2011, color: other, Year of construction: 2011, Empty weight: 5.100 kg Iedpfxjxqfyho Agmeau Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, empty load weight: 7,950 kg, maximum load weight: 28,050 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2014, next inspection (TÜV): 10/2026, loading space volume: 92 m³, suspension: air, tire size: 385/65R22,5, Equipment: ABS, | Knapen K200 Sliding Floor Trailer | SAF axles with disc brakes | Remote control | 7,950 kg unladen weight | Roller shutter, toolbox | 10 mm floor | Aluminum rims | Tires 385/65R22.5 | TÜV valid until 10/26 | Subject to errors, typos, and prior sale. Iedezd D Auopfx Agmsau