Used Feldbinder Silo for sale (681)

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Njdpfx Aexfwdog Iswn Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Nsds E Dquspfx Ag Iewn Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: good (used), functionality: fully functional, color: blue, tank capacity: 80,000 l, machine/vehicle number: AHL-80, storage tank with the capacity of 80.000 liter for liquid fertilizer Nwedpfxeb Avh Ao Ag Ijn

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo Nwedpfxsz D U Daj Ag Isn • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), functionality: fully functional, mileage: 11,450 km, fuel: diesel, gearing type: mechanical, emission class: euro6d, Year of construction: 2021, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, MULTICAR M31 Municipal utility vehicle with the following attachments: - BUCHER Unix SC200 Vario wedge snowplow with a maximum clearing width of 200 cm - GMEINER Husky V13 silo spreader with control panel This Multicar M31 was first put into operation in 2021 and has only 860 total operating hours, 460 hydraulic hours, and 11,450 km. It comes from a single owner. The vehicle is in good overall condition, ready for immediate use, and its current list price is €150,000. The sale is for a used machine, excluding any return, warranty, or guarantee. - Net price: €67,142 / Gross price: €79,900 - Inspection/test drive is possible at any time! - Nationwide shipping can be arranged; the costs depend on the distance! - We will be happy to have our leasing partner prepare an attractive leasing/financing offer for you! Njdpfx Agszhv Tao Ijwn

Condition: good (used), Year of construction: 1987, overall weight: 42,000 kg, total width: 6,000 mm, total length: 7,800 mm, total height: 3,900 mm, sheet thickness (max.): 22 mm, Flanging and dishing machine SCHLEIFSTEIN - KBol 4022 MACH-ID 9659 Make: SCHLEIFSTEIN Type: KBol 4022 Year: 1987 Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Kunkel head forming rolls: R = 350 R = 300 R = 275 R = 250 R = 200 R = 175 R = 150 Njdpfx Agozfi Hho Ijwn   Basket bottem Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters Nwjdsz Iww Rjpfx Ag Ion • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: used, mileage: 737,000 km, first registration: 04/2019, fuel type: diesel, fuel: diesel, Year of construction: 2019, MAN TGX 26.500 FLL 6x2 chassis (formerly a silo vehicle) • Emission standard: EURO 6C • XLX cab • Retarder / Intarder • 16-speed manual transmission • Distance control cruise control • Lane assistant • Emergency braking assistant • Hill start assist • Differential lock • Automatic climate control • Auxiliary heater Nedszyzwbjpfx Ag Ijwn • Spoiler • Refrigerator • Telephone • Multifunction steering wheel • Heated driver's seat • Large radio with navigation • CB radio • Hands-free system • Sleeper cab with 2 beds • Central locking • GVWR: 26,000 kg • Wheelbase: 4,600 mm • Vehicle dimensions: 9,550 x 2,500 x 3,900 mm (LxWxH) • Frame length: 7,100 mm (cab to end of chassis) • Tires: 315/70 R 22.5 • 3rd axle can be lifted and steered - MOT / Inspection: new! - German vehicle! - 1st owner! Subject to errors and prior sale!

Condition: used, mileage: 685,000 km, power: 368 kW (500.34 HP), first registration: 01/2013, overall weight: 70,000 kg, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, FH500 EURO 5 Automatic transmission with VEB+ Air conditioning Cooler box Nwedpfxezzgtko Ag Ien Aluminum rims Wooden crane Epsilon S270L Technically approved gross vehicle weight: 70,000 kg Belgian registration Good condition Price: €33,500 net

Condition: used, functionality: fully functional, Complete stationary sawmill including: Log infeed, transverse conveyor Log lifting device with ejector Transverse conveyor and feeder to the clamping carriage Clamping carriage, hydraulically operated, with auxiliary carriage, electrically operated; the entire sawing line can be controlled from the clamping carriage. FULL SAW FRAME BRAUN CHGB 71/75 with automatic overhang adjustment and stepless feed Saw blade tensioner Jansen, hydraulically operated Electrically adjustable wedge with electric extraction rollers Roller conveyor with pusher Spiral roller conveyor for boards to the edging line Transverse conveyor in front of the edger Undertable cutoff saw DOUBLE EDGER PAUL KMEZ with trim removal system Roller conveyor after the edger with discharge to the left/right Saw blade sharpening machine for saw frames, Vollmer Saw blade setting machine for saw frames, Riva Circular saw sharpening machine, Vollmer Nwodpfxjz I Tabs Ag Ien Sawdust and trim disposal, shaking chute, vibrating screen with 1 fraction 2 conveyor belts for feeding into the silo

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. Nodszy Hrqjpfx Ag Ijwn • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: good (used), Containers, storage containers, ceramic containers, stoneware containers, ceramic storage vessels, earthenware containers, acid-resistant stoneware, fermentation crocks, sauerkraut crocks, ceramic barrels, earthenware pots -Manufacturer: VEB Crinitz N/L, Ceramic containers, acid-resistant stoneware -Capacity: 100 liters -Material: KER 515 acid-resistant stoneware ceramic GDR TGL standard 7838 -Opening: Ø 205 mm -Number: 3 containers available Nodpfoz Epb Nsx Ag Ijwn -Price: per piece -Dimensions: 490/450/H810 mm -Weight: 84 kg/unit

Condition: used, EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo . Nwjdpfez Ht Ebox Ag Ijn Usage: Frozen Block cutter for butter and similar products Electrics: 3~ / 400 v/50hz Air: 6 bar -8bar

Condition: used, Year of construction: 2017, functionality: fully functional, KNOLL FKB 33000 Systems for Chip Processing Processing chips offers numerous advantages: if they are dry and sorted by type, disposal costs are reduced. Depending on the material, the chips can even be sold. A chip processing system includes various components, depending on the requirements: conveying and collecting equipment, magnetic separation technology, filters, and volume-reducing briquetting presses. Containers or chip silos are also required. The components can be linked together and operated fully automatically. Application areas The chip processing system is suitable for both semi-automatic and fully automatic processing of metal chips. Automatic conveying systems or operating personnel with trolleys/containers handle the chip transport from the machining centers. The system is used in almost all manufacturing areas of the machining industry. The processing of different materials (e.g., aluminum, steel, or cast iron) can also be realized using separate systems. Features • Chip drying is a prerequisite for safe transport on public roads. • Volume reduction lowers storage and transport costs. • Recovery of chips and coolant saves the environment and reduces costs. Njdpfx Agoz D Uvps Iswn Possible main components • Lifting/tipping device • Chip shredder • Chip centrifuge • Chip conveyor • Separation channels • Magnetic separation technology • Briquetting press • Coolant filter and collection container • Control technology and wiring • Container filling • Chip silo

Condition: good (used), functionality: fully functional, 1 Used Small Concrete Mixing Plant For example, for precast concrete production Manufacturer: PEMAT Type: 0.5 m³ Aggregate Storage 2 bins 2 separate dosing and discharge conveyors per hopper Mixer: 0.5 m³ pan mixer Dosing: Aggregates via dosing conveyors at the hopper 250 kg cement scale 100 l spirit level Cement silos 1 x 40 ton Control: Manual operation / control panel AVAILABLE IMMEDIATELY Location: Northern Germany Nwedpfeyk Ev Rjx Ag Ijn Offer is net ex works Subject to prior sale, errors and/or misrepresentations excepted Sold as is, without warranty or guarantee, lying down and/or standing up Reproduction, further use, publication and/or copying of this offer is strictly prohibited!

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Used Mobile Concrete Batching Plant / Concrete Filling Station Manufacturer: PROMEKON GmbH Model: QUASIMIX 1000S Availability: Immediately Location: Northern Germany Year of construction 2022 Previous production: ca. 400m3 Technical Specifications Aggregate Storage • 1 double hopper: 2 × 2.4 m³ • Incl. 2 separate dosing belts Mixer • Pan mixer: 1 m³ • Output: approx. 25 m³/h • Incl. automatic mixer scale (calibratable) Dosing System • Aggregates via dosing belts at the hopper Nwodpfxoynhkfe Ag Ien • Cement dosing • Water dosing via water meter Cement Silo • 1 × 27.3 m³ Control System • Fully automatic process and system control • Designed for self-service operation Terms of Sale • Offer is net ex works • Subject to prior sale • Errors and/or misstatements excepted • Sold without warranty or guarantee • Condition: as seen, lying and/or standing • Any reproduction, reuse, publication, or copying of this offer is prohibited

Condition: used, functionality: fully functional, Year of construction: 1988, 1 Unit Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Manufacture: 1988 Output: approx. 55 m³/h (compact concrete at 30 sec. mixing time) Aggregate Storage 4-compartment inline silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 Equipped with moisture probe / moisture measurement system Weighing / Dosing System Aggregates via weighing conveyor: max. 2,500 kg Cement scale: 250 kg Water scale: 250 liters Cement Silos Njdpfx Agsy Hia Tj Iown 3 × 60 tons – Manufacturer: Kurz 1 × 60 tons – Manufacturer unknown Control System Gedis Operator Station-Control container Additional Equipment Partial enclosure included Admixture container included Available immediately Location: Ludwigslust / Northern Germany Offer is net, ex works (EXW) from current location Subject to prior sale Errors and/or misstatements excepted Sold as seen, without warranty or guarantee - Any reproduction, reuse, publication, or copying of this offer, in whole or in part, is strictly prohibited.

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Superstructure: Compressor with oil cooling. The compressor is operated via tipping hydraulics! Oil motor Sunfab type M-034, No. 278048, silo compressor GHH type CG80 H with diesel bell, machine No. 383266 WO2225NJ630F4DG, silo oil 405 spec. compressor oil K-10 ltr., pressure silencer W1-12 s2.0 inch Storz C2.0 inch internal thread, intake air filter W12/13 M lid R F-Part. AL17 safety valve R 1 1/2 inch 2.6 bar, measured compressor speed on Szm motor 1050 rpm, split drive large = compressor 3450 rpm. Dismantling of a Feldbinder silo. The compressor was overhauled in 2006 for approximately €9,000; invoice is available. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Nodoi Rnx Uspfx Ag Iswn

Condition: new, functionality: fully functional, power: 125 kW (169.95 HP), gearing type: automatic, fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, CONSTMACH MOBILE 100 is a fully automatic mobile concrete plant that stands out for its high production capacity. Its integrated structure on a wheeled chassis allows it to carry all equipment, including the cement silo. This provides users with significant advantages such as easy transportation, quick setup, and minimal infrastructure requirements. Only a flat ground is required for site preparation, thus eliminating the need for additional infrastructure investment. The plant, which has a 33-ton integrated cement silo, can also be supported by external silos ranging from 50 to 500 tons, depending on requirements. The twin-shaft mixer used in the MOBILE 100 model has a wet concrete production capacity of 2 m³ and ensures a highly homogeneous mix. In addition, the mobile aggregate pre-feeding conveyors eliminate the need for a ramp, saving time and money on the job site. The system has an advanced automation infrastructure equipped with SIEMENS and SCHNEIDER brand electronic components. The production process is easily managed with user-friendly PLC-based control software. MOBILE 100 can be transported quickly and safely between construction sites thanks to its dimensions, which comply with international transportation standards. Mobile 100 - Mobile Concrete Plant Technical Specifications Production Capacity: 100 m³/hour Transport Dimensions: 17 (L) x 2.8 (W) x 4.3 (H) m Weight: 30 tons Total Motor Power: 125 kW Required Generator: 200 kVA Mixer Type: Twin-Shaft Mixer Working Area: 300 m² Aggregate Storage Bunker: 4 x 12 m³ Aggregate Weighing Bunker: 3 m³ Transfer Belt: 1,000 x 13,000 mm Mixer Concrete Volume: 2 m³ Cement Weighing Bunker: 1,200 kg Water Weighing Bunker: 800 liters Additive Weighing Bunker: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo: Internal 26 tons / External 50–500 tons Control Type: Fully Automatic Why Should You Choose CONSTMACH MOBIL 100 Mobile Concrete Batching Plant? Nsdpfx Agoxpguke Ijwn CONSTMACH MOBIL 100 offers high efficiency, quick installation, and long-lasting use in a single structure. Manufactured with a quality engineering approach, this plant is equipped with automation systems that meet international standards and provides maximum performance in all climates and working conditions. It shortens the investment payback period with its energy savings, easy maintenance, and low operating costs. Spare parts and technical support services offered with the CONSTMACH guarantee ensure the uninterrupted operation of your plant. If you are looking for a reliable, high-capacity, and portable solution, MOBILE 100 is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 47 kW (63.90 HP), color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH MOBICOM 30 Mobile Concrete Plant is a concrete production facility designed specifically for projects seeking high mobility and low operating costs, standing out with its compact design. This system, manufactured to fit into a single 40 ft container, requires minimal setup on-site and eliminates the need for a mobile crane during assembly. The MOBICOM 30 can be easily transported between construction sites by truck and continues to operate in the same position during production. The mixer is positioned close to ground level, allowing the produced concrete to be conveniently transferred to the transmixer via a conveyor belt. This compact plant carries all concrete production components except the cement silo. If cement is supplied in bags, production can be easily carried out using the blasting bunker and cement transfer system on the chassis. If desired, MOBICOM 30 can also be used with an external cement silo. It can be equipped with single-shaft, pan, or planetary mixer options according to production needs. The optimized aggregate bunker's low feed height allows the loader bucket to fill the aggregate directly from ground level. SIEMENS and SCHNEIDER branded electronic components, high-quality PLC, and user-friendly automation system make it easy to control all plant operations. MOBICOM 30 - Mobile Concrete Mixing Plant Technical Specifications Nwedjxpg Abopfx Ag Ion Production Capacity: 30 m³/hour Transport Dimensions: 8 (L) x 2.3 (W) x 2.5 (H) meters Weight: 8.5 tons Total Motor Power: 47 kW Required Electric Generator: 70 kVA Mixer Options: Pan – Single Shaft – Planetary Aggregate Storage Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 0.75 m³ Aggregate Transfer Belt: 800 x 15,250 mm Mixer Wet Concrete Volume: 0.5 m³ Cement Weighing Bunker: 300 kg Water Weighing Bunker: 200 liters Additive Weighing Bin: 20 liters Air Compressor: 300 liters, 4 kW Cement Silo Capacity: 50 – 200 tons Control Type: Fully Automatic Working Area Requirement: 200 m² Why Choose MOBICOM 30 | Mobile Concrete Batching Plant? Developed by CONSTMACH, MOBICOM 30 is one of the most efficient solutions in its class in terms of both mobility and performance. Its compact design, which can be transported in a single container, low installation time, and high production capacity provide significant savings in time and cost. The automation system, supported by SIEMENS and SCHNEIDER components, guarantees long-lasting and uninterrupted operation. Manufactured with the CONSTMACH guarantee, MOBICOM 30 is an ideal investment for construction projects of all sizes thanks to its durability, easy transportability, and flexibility of use. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH Compact-30 compact concrete mixing plant offers a superior solution in terms of both portability and production performance with its compact structure and high efficiency. Installation is extremely fast and requires only a flat ground, eliminating the need for additional concrete infrastructure work. This feature saves time and costs on site. Thanks to its steel-legged cement silos and metal-walled aggregate bunker system, it offers easy installation without requiring additional construction. This plant can be equipped with pan, single-shaft, or planetary mixer options, suitable for ready-mix concrete, dry concrete, and precast concrete production. The Compact 30 features a high-tech automation system with SIEMENS and SCHNEIDER branded electronic components. Thanks to its PLC-controlled, fully automatic structure, the production process is easy, safe, and uninterrupted. Its user-friendly interface provides maximum control and flexibility to the operator during production. Despite its compact structure, it offers long-term use with high quality and durability. Compact-30 Compact Concrete Batching Plant Technical Specifications Production Capacity: 30 m³/s Transport Position Dimensions: 12 x 2.2 x 2.2 m Weight: 13 tons Total Motor Power: 50 kW Required Electric Generator: 80 kVA Mixer Options: Pan – Single Shaft – Planetary Working Area: 200 m² Aggregate Storage Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 0.75 m³ Aggregate Transfer Bucket Volume: 0.75 m³ Mixer Wet Concrete Volume: 0.5 m³ Cement Weighing Bunker: 300 kg Water Weighing Bin: 200 liters Additive Weighing Bin: 20 liters Air Compressor: 300 liters – 4 kW Cement Silo: Capacity options ranging from 50 to 500 tons Njdpjxpg Htsfx Ag Iown Control Type: Fully Automatic Why Choose the Compact-30 Compact Concrete Batch Plant? CONSTMACH combines low investment costs with high production performance with its Bucket Compact 30 model, produced with years of engineering experience. It offers maximum reliability to its users with its CE-compliant production, high-quality components, and worldwide service network. The Compact 30 provides both the power of fixed plants and the flexibility of mobile systems, ensuring you get the most out of your investment in the shortest time possible. Its durability, easy maintenance, and energy efficiency offer long-term operational advantages. CONSTMACH is the right choice for professionals seeking quality and consistency in concrete production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 105 kW (142.76 HP), color: other, Year of construction: 2026, Equipment: cabin, cruise control, hydraulics, onboard computer, CONSTMACH Compact-60 is a high-performance compact batch plant model specially designed to offer maximum efficiency in limited spaces. With a production capacity of 60 m³/hour, it combines the durability of stationary plants with the portability of mobile plants. Its compact design allows for extremely fast installation and requires minimal infrastructure. This saves the user both time and money. The Compact-60's aggregate bunker can be positioned in a linear or square shape depending on the project and site layout. The square bunker option allows the plant to be transported in a single 40 ft OT container, providing a significant advantage in transportation. Furthermore, the plant's steel-legged cement silos and metal-walled design offer easy installation without the need for concrete wall construction. The plant can be equipped with pan, single-shaft, twin-shaft, or planetary mixers for use in different applications such as ready-mix concrete, dry concrete, or precast production. Manufactured in accordance with CE standards, the Compact-60 is equipped with high-quality electronic components from SIEMENS and SCHNEIDER. The advanced automation system manages the entire production process accurately and reliably with its user-friendly interface. Compact-60 Compact Concrete Mixing Plant Technical Specifications Nodpfoxpg Nnox Ag Iewn Production Capacity: 60 m³/hour Transport Size: 13 x 2.3 x 2.3 m (square bunker type) Weight: 28 tons Total Motor Power: 105 kW Required Generator: 125 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Aggregate Storage Bunker: 4 x 15 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Weighing Belt: 800 x 11,100 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bunker: 300 liters Additive Weighing Bunker: 20 liters Air Compressor: 300 liters / 5.54 kW Cement Silo: 50 – 500 ton capacity options Control Type: Fully Automatic Why Choose the Compact-60 Concrete Plant? CONSTMACH Compact-60 combines high production capacity with a compact design, offering a reliable and economical solution for professional concrete production. Its portable structure, quick assembly advantage, and low operating costs make it ideal for construction sites with limited space. Thanks to its high-quality components, durable design, and world-class production standards, it provides maximum efficiency with minimal maintenance requirements for many years. If you are looking for powerful performance, durability, and easy portability, the Compact-60 is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 205 kW (278.72 HP), color: other, Year of construction: 2026, Equipment: cabin, hydraulics, CONSTMACH COMPACT-120 fully automatic concrete plant is a compact concrete production facility designed to offer high production capacity even in limited land conditions. Thanks to its reduced dimensions, it requires minimal space, yet delivers equivalent performance to stationary plants with a production capacity of 120 m³/h. This feature makes it an ideal solution, especially for urban projects, narrow construction sites, or projects requiring frequent relocation. The COMPACT-120 concrete plant can be manufactured with linear or square aggregate bunker options according to user needs. This allows for flexible use in both fixed and mobile plant concepts. Manufactured in compliance with CE standards, the plant offers significant cost advantages to businesses with its quick assembly, easy transportability, and low infrastructure requirements. Steel-legged cement silos eliminate the need for concrete foundations, while the aggregate feeding ramp can be conveniently prepared using a metal wall system. The 3 m³ capacity twin-shaft mixer used in the production line provides homogeneous mixing quality, while the plant's entire automation system is equipped with high-end components from SIEMENS and SCHNEIDER. The PLC-controlled system, with its advanced software interface, provides operators with ease of use and maximum control. COMPACT-120 Compact Concrete Plant Technical Specifications Production Capacity: 120 m³/h Weight: 55 tons Total Motor Power: 205 kW Electric Generator Requirement: 300 kVA Mixer Type: Twin-Shaft Mixer Working Area: 600 m² Aggregate Storage Bunker: 4 x 30 m³ Aggregate Weighing Bunker: 4.5 m³ Aggregate Weighing Belt: 1,000 x 11,100 mm Aggregate Transfer Bucket Volume: 6 m³ Mixer Wet Concrete Volume: 3 m³ Cement Weighing Bunker: 1,800 kg Water Weighing Bin: 1,000 liters Additive Weighing Bin: 100 liters Air Compressor: 500 liters, 5.5 kW Cement Silo: Capacity options between 100 and 500 tons Control Type: Fully Automatic Why Should You Choose the COMPACT-120 Concrete Plant? Nsdpsxphb Sefx Ag Iewn CONSTMACH COMPACT-120 combines high production capacity with a compact design to offer investors maximum efficiency. With its low operating costs, easy installation, and portability, it is the perfect solution for both short-term and long-term projects. This plant, with all components from world-class brands, is designed for long-lasting and uninterrupted production. Offered with the CONSTMACH guarantee, the COMPACT-120 combines quality, durability, and engineering excellence in a single structure. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Year of construction: 2002, functionality: fully functional, TECNOVA MINI / 60 repelletizing machine Type: ES 60 N / 35D DEG Year of manufacture: 2002, little used, completely refurbished in 2023. Availability: Immediately. Current condition: Can be viewed in operation. Screw: 60, L/D ratio: 35, Njdpfx Asw U Swpeg Ijwn Capacity: 120-140 kg/h, Feeding screw: yes, Degassing system: yes, Cutting head type: head cutter, Suitable materials: PE/PP/PS. Other specifications: 8 mm diameter granules, Moisture max. 3% Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control panel, Pressure control, Water cooling, transport, Venturi, cyclone and pipes, Dimensions: 6.40 m long x 2.10 m wide x 4.30 m high Built-in power: 30 Kw. + film granulator Meccanoplastica Type 3140 (1998) !!! Price included!!! For sale with spare parts: screw barrel, heating elements, filter changer, head cutter insulation, knives for grinder, compactor, silo bearings, cyclone, head cutter.

Condition: used, mileage: 319,000 km, power: 338 kW (459.55 HP), first registration: 05/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: green, gearing type: automatic, Year of construction: 2015, Equipment: ABS, air conditioning, VOLVO FMX 460 HOOKSYSTEM Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 319 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? AIRCONDITION ? ENGINE BRAKE ? POWER STEERING ? TACHOGRAPH TOTAL WEIGHT: 26 000kg Nwjdpfxsxw Dqfj Ag Ien WHEELBASE: 490/135 cm TIRE SIZE: FRONT : 385/65R22,5 BACK : 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: EPSILON Q150Z79 TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 18881