Used Falken Plate Shear - Mechanical for sale (15,622)

Year of construction: 1997, condition: ready for operation (used), Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t. Bodpfx Aaogcbpks Dodb

Year of construction: 1998, condition: ready for operation (used), Working width: 3050mm, max. cutting capacity: 9mm, length: 3500mm, width: 2500mm, height: 2000mm, weight: 10t. Bdjdpogcbpcofx Aa Dob

Year of construction: 2013, condition: ready for operation (used), A guillotine shear Durma is available. Working width: 3100mm, max. sheet thickness: 13mm, stroke: 125mm, stroke rate: 13/min, oil capacity: 330l, machine dimensions X/Y/Z: approx. 4250mm/3850mm/2200mm, weight: approx. 11700kg. An on-site inspection is possible. Bdodpfxjxph R Ts Aa Dob

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Bdedpfjya Hwzex Aa Dob

Year of construction: 1975, condition: ready for operation (used), Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible. Bdsdsxc Nikepfx Aa Deb

Condition: ready for operation (used), A high-performance crank plate shear with a low operating hours count is offered. Design: all-steel welded construction, stroke rate: 50 strokes/min, control FM 1S, backgauge manual or motorized (MAH 51/52), pneumatic hold-down device, rear safety light barrier. Inspection possible by arrangement. Bdjdpfx Aaex Hfgvo Dsb

Year of construction: 2001, condition: ready for operation (used), Working length: 2040mm, max. cutting capacity: 3mm, stroke rate: 30strokes/min, table height: approx. 850mm, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 2400mm/2000mm/1450mm, weight: approx. 1500kg. An on site inspection is possible. Bodpex Hz Nyefx Aa Dsdb

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Bdsdpfx Aasx Da D Uj Dob Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: used, Year of construction: 1980, sheet width 3,5 mm cutting width 3050 mm Bsdoyacpmopfx Aa Dedb weight of the machine ca. 4,5 t

Condition: used, Year of construction: 1980, Technical data: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Weight, approx.: 6400 kg Equipment: Bdsdpfx Aaotvfzco Dsb · Manual back gauge · Cutting gap adjustment · Cutting angle adjustment · Cutting line illumination

Condition: used, Year of construction: 1962, Working length: 1020 mm Bjdpjrh D Ttofx Aa Dedb Sheet capacity max.: 3.5 mm Dimensions (WxDxH), approx.: 1640 x 1860 x 1390 mm

Condition: used, Year of construction: 1999, weight of the machine ca. 16 t sheet width 3150 mm sheet thickness - max. 16 mm sheet width - min. 1,6 mm voltage 400 V range - high tensile 3950x2475x2520 mm Bdsdpfx Aox U A Hvja Dob

Condition: good (used), Year of construction: 1982, sheet width . mm working width 4500 mm plate thickness . mm Bjdeq Dta Ispfx Aa Dodb 8mm distance between columns . mm

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop Bdedjv Tzphspfx Aa Deb - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 2,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, emergency stop, finger protection, foot remote control, Standard Features - ELGO P40T CNC control unit - Robust, welded, monolithic frame construction providing maximum cutting precision - NC-controlled, motorized 750 mm backgauge system - Upper blade with 2 cutting edges, lower blade with 4 cutting edges, made of high-alloy steel - Mechanical hold-down system preventing sheet slippage during cutting - Easily adjustable blade clearance adjustment mechanism - Ball transfer front support table - Front support arms with rule - Cutting line illumination system - Finger guard system - Foot pedal - Rear safety guards - Emergency stop button Bdjdpfx Ajyg Id Aja Djb Optional Features - 1,000 mm backgauge system - Rear sheet support and sliding system enabling sheets to be moved and fed to the rear with ease - Drop-down system for cut pieces to fall to the front - Front adjustable angle square, 0–180° - Front support arms in custom lengths - Manual 750 mm backgauge with front adjustable handwheel - Rear safety light barrier Technical Specifications Machine Type: A04/2060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 2,060 mm Cutting Angle: 1.3° Cutting Speed: 41 cuts/min Table Depth (C): 800 mm Machine Dimensions (L × W × H): 2,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 3,000 kg

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 3,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, Standard Features ELGO P40T CNC control unit Robust, welded and monolithic frame structure providing maximum cutting precision NC-controlled, motorized 750 mm backgauge system Upper blade: double-edged; lower blade: four-edged, manufactured from high-alloy steel Mechanical hold-down system to prevent sheet slippage during cutting Easily adjustable blade clearance system Ball transfer front support table Front support arms with ruler Cutting line illumination system Finger protection system Foot pedal Rear protective cages Emergency stop button Optional Features 1,000 mm backgauge system Rear sheet support and sheet sliding system for easy positioning and transfer of sheets to the rear System for dropping cut pieces to the front Adjustable front angle gauge 0–180° Front support arms available in custom lengths upon request Manual 750 mm backgauge with front-adjustable handwheel system Rear safety light barrier Technical Specifications Machine Type: A04/3060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 3,060 mm Cutting Angle: 1.3° Cutting Speed: 41 strokes per minute Table Length (C): 800 mm Machine Dimensions (L × W × H): 3,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Bdsdpfsyg Ic Eox Aa Dsb Weight: 4,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: PWA-230114, control type: manual, degree of automation: manual, actuation type: manual, sheet thickness steel (max.): 2 mm, table height: 765 mm, back gauge adjustment: manual, back gauge: 600 mm, overall weight: 500 kg, total length: 2,000 mm, total width: 1,040 mm, total height: 1,600 mm, Good day, Bedpfjygm S Esx Aa Dsdb We hereby offer you, subject to prior sale, a used manual guillotine shear (sheet metal shear), Bernardo, type HLS 1050 x 2.0. Manufacturer: Bernardo, PWA Handels Ges. m.b.H. Type: HLS 1050 x 2.0 Year of manufacture: 05/2023 Machine no.: PWA-230114 Cutting length: 1050 mm Max. sheet thickness (steel 400 N/mm²): 2.0 mm Back gauge adjustment: 0 to 600 mm Table fence adjustment: 95 to 450 mm Table size: 1300 x 600 mm Working height: approx. 765 mm Machine dimensions: 2000 x 1040 x 1600 mm Transport dimensions: 1900 x 1050 x 1120 mm Machine weight: 500 kg Included optional accessories: 600 mm back gauge Quick-clamping hold-down device Note: The above technical data is taken from the manufacturer’s brochures or other sources. We cannot guarantee the accuracy or completeness of this information. Scope of delivery: 1 used Bernardo manual guillotine shear, type HLS 1050 x 2.0 Application and condition: The machine was occasionally used in a factory workshop for shearing sheet metal. It is fully functional and in good condition. We would be pleased if this machine is of interest to you. Your service team, Mertens & Frowein GmbH

Condition: new, Standard equipment: - D-Touch 7 touch screen CNC control unit - CNC-controlled motorized cutting gap adjustment via upper knife (up to VS 4013) - CNC-controlled motorized cutting gap adjustment via lower knife (patented) (from VS 4016) - Plastic inserts for downholder (material protection) - variable cutting length adjustment via CNC - Cutting reel adjustment via CNC - Table plates with ball rollers - backgauge on ball screws 1000 mm - folding up finger guard to 1000 mm - 1 side stop L= 1500 mm, with scale, T-slot & tilt stop - 2 support arms L=1000 mm, with T-slot & tilt stop (up to VS 3020) - 3 support arms L=1000 mm, with T-slot & tilt stop (from VS 4006 to VS 4020) - 5 support arms L=1000 mm, with T-slot & tilt stop (from VS 6006 to VS 6016) - Cutting line illumination Bsdpsn Ut Stefx Aa Dodb - Upper and lower knife can be rotated four times (4 sides can be used) Special accessories: - Light curtain for finger protection - throat 500 mm - Pneumatic sheet holding device "Durma I - Pneumatic sheet holding device without sheet return "Durma IV - Sheet metal holding device with conveyor belt and scrap container - CNC material feeding system - rear sheet metal chute - backgauge 1250 mm - Hydraulically liftable backgauge - X1, X2 axis control - adjustable angular stop 0-180 - additional supporting arm L= 2 m with vertical support - additional support arm L= 3 m with vertical support - extension arm L= 2 m with vertical support - extension arm L= 3 m with vertical support - side stop extension L= 2 m with vertical support - Side stop extension L= 3 m with vertical support - Side stop right L= 1500 mm, with scale, T-slot and vertical support - Ball in side stop or support arms - CNC front feed system for 3 meters - Laser cutting line - Spare knife (standard upper and lower knife) - Spare knife (upper and lower knife especially for stainless steel) - Oil cooler - Hydr. twist minimization for narrow sections - Central lubrication manual - Central lubrication motorized - Special painting - Control panel on the other side - Oil heating - Control panel air conditioning control system: - DURMA D-Touch 7 - 7 inch color touch screen - USB interface - Ethernet: RJ-45 10/100M - Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness - Creation of programs - Cut counter - User friendly - Fast data input Are you interested in exactly this machine model or do you have specific questions? Please feel free to send us a message via the contact field. We will answer you immediately!

Condition: new, Standard equipment: - D-Touch 7 touch screen CNC control unit - throat 50 mm - Backgauge with ball screw 1000 mm - Plastic inserts for hold down (material protection) - 1 side stop L= 1500 mm, with scale & T-slot & tilt stop Bodpfx Asn Urhvsa Dsdb - 2 support arms L=1000 mm, with T-slot & tilt stop - Table plates with ball rollers - Infinitely adjustable cutting length - manual cutting gap adjustment - automatically tiltable backgauge - cutting line illumination - upper knife can be rotated twice and lower knife four times special accessories: - Light curtain for finger protection - throat 350 mm - Throat 500 mm - Pneumatic sheet holding device "Durma I - Pneumatic sheet holding device without sheet return "Durma IV - Rear sheet guide - Back gauge 1250 mm - Hydraulic anti-rotation device for SBT 3016 and SBT 4013 - additional supporting arm L= 2 m with vertical support - additional supporting arm L= 3 m with vertical support - extension arm L= 2 m with vertical support - extension arm L= 3 m with vertical support - side stop extension L= 2 m with vertical support - Side stop extension L= 3 m with vertical support - Side stop right L= 1500 mm, with scale, T-slot with vertical support - ball in side stop or in support arms - adjustable angle stop 0-180 - CNC controlled motorized cutting gap adjustment - laser cutting line - spare knives - 1 set of upper and lower knives - oil cooler - special painting - Control panel on the other side - oil heating - control panel air conditioning DURMA D-Touch 7 7 inch color touch screen USB interface Ethernet: RJ-45 10/100M Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness Creation of programs Cut counter User friendly Fast data input DURMA D-Touch 7 7 inch color touch screen USB interface Ethernet: RJ-45 10/100M Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness Creation of programs Cut counter User friendly Fast data input Control system: - DURMA D-Touch 7 - 7 inch color touch screen - USB interface - Ethernet: RJ-45 10/100M - Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness - Creation of programs - Cut counter - User friendly - Fast data input Are you interested in exactly this machine model or do you have specific questions? Please feel free to send us a message via the contact field. We will answer you immediately!

Condition: good (used), functionality: fully functional, Year of construction: 1990, We are selling a used guillotine shear from Stanko with a cutting width of 2000mm and a material thickness of 6mm. The machine is powered and can be tested. Crane loading is possible. Bedpfxowywmhj Aa Dedb

Condition: new, Standard equipment - EZM9910 control unit (standard on MS 2004, 2504, 3004) - 550 mm manual backgauge (standard on 1303, 2003, 2525) - 750 mm motorized backgauge programmable via control unit (standard on 2004, 2504, 3004) - plastic inserts for hold-downs (material protection) - 1 side stop and 2 sheet support arms - finger protection - portable foot switch with emergency stop - spring-loaded stop in T-slot of support arms (standard on MS 2004, 2504, 3004) - ball screw (standard on MS 2004, 2504, 3004) - Table plates with ball rollers (standard on MS 2004, 2504, 3004) - Upper and lower knife can be rotated twice (MS 1303, 2003, 2525) - Upper knife can be rotated twice and lower knife four times (MS 2004, 2504, 3004) Optional accessories: - D-Touch 7 touch screen CNC control unit - 750 mm motorized backgauge programmable via control unit (option on MS 1303, 2003, 2525) - 1000 mm motorized backgauge programmable via control unit - pneumatic sheet holding device - adjustable angle stop 0-180 - additional support arm L= 2 m with vertical support - additional supporting arm L= 3 m with vertical support - extension arm L= 2 m with vertical support - extension arm L= 3 m with vertical support - side stop extension L= 2 m with vertical support - Side stop extension L= 3 m with vertical support - Cutting line light (for MS 2004, 2504, 3004) - Spare blades 1 set of upper and lower blades - special painting control unit: EZM9910 control unit (standard on MS 2004, 2504, 3004) DURMA D-Touch 7 (option) - 7 inch color touch screen - USB interface - Ethernet: RJ-45 10/100M - User friendly Bodsn Tpifepfx Aa Dsdb - Fast data input - Easy connection - Unlimited material types Are you interested in this machine model or do you have specific questions? Please feel free to send us a message via the contact field. We will answer you immediately!

Condition: used, Year of construction: 2008, sheet width 3200 mm plate thickness 6 mm distance between columns 3200 mm back stop - adjustable 20 - 600 mm dimensions ca. 4010 x 1610 x 1620 mm engine output 7,5 kW Control eView weight of the machine ca. 7,2 t CNC swing cut panel shears Bedpfxsqva Rzj Aa Djdb electrical components from Siemens, ABB and Mitsubishi, Pilz safety control hydraulic components made in Italy 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available

Condition: used, Year of construction: 1978, sheet width 3100 mm Bsdpfxjuagxps Aa Dsdb plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 1973, sheet width 3100 mm plate thickness 3 mm Bedpjtzv T Tjfx Aa Djdb rear stop 1000 mm down holder 18 Stk cutting angle 0.5 - 1,0° 30° ° oil volume 150 l total power requirement 5,5 kW weight 4300 kg dimensions of the machine ca. 3800 x 1950 x 1600 mm Features: - Manual rear stop (front via handwheel) - Manual cutting angle adjustment - 1x front support arm - 1x side stop - Front finger guard - Operating instructions (English)

Condition: used, Year of construction: 1989, sheet width 2540 mm plate thickness 6 mm rear stop 900 mm down holder 14 Stk no. of strokes 20 Hub/min total power requirement 10 kW dimensions of the machine ca. 3100 x 2200 x 2600 mm weight 5000 kg Features: - Central lubrication - Electric rear stop - 1x side stop 2350 mm - 2x front support arms with stop 1700 mm - Front finger guard Bdjdpfx Aaevg R Sfe Dob - Spare blade (used) - Foot switch