Used Esterer Gang Saw With Cutting Width Adjustment for sale (51,137)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 241306, saw blade diameter: 500 mm, cutting height (max.): 170 mm, cutting width (max.): 395 mm, power: 7.5 kW (10.20 HP), borehole diameter: 30 mm, TECHNICAL DETAILS Max. cutting width: 395 mm Max. cutting height: 170 mm Saw blade diameter min.: 490 mm Saw blade diameter max.: 500 mm Saw blade bore diameter: 30 mm Feed table length: 5,640 mm Output table length: 1,180 mm Feed speed: Automatic MACHINE DETAILS Voltage: 400 V Power consumption: 16.5 A Fuse: 32 A Power: 7.5 kW Transport weight: 800 kg Hsdpfsy Akvnox Ahgot Transport packages: 3 EQUIPMENT Automatic feed system

Condition: like new (used), Year of construction: 2014, functionality: fully functional, maximum blade diameter: 350 mm minimum blade diameter: 340 mm two motors, 3 kW each 400 V year of manufacture: 2014 Hjdpezmwl Uefx Ahget left unit fixed, right unit movable pneumatic clamping system maximum distance between blades: 2800 mm minimum distance between blades: 600 mm weight: approximately 800 kg

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Hedpfxjhw Ng Is Ahgst Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Colour: Grey Hodpfxsyf H H Hs Ahgjt Weight: 1.600 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 595001 3 16 - Main motor power [kW]: 6.5 - Voltage [V]: 400 - Current consumption [A]: 15 - Fuse [A]: 20 - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), functionality: fully functional, saw blade diameter: 350 mm, overall weight: 480 kg, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, input voltage: 380 V, 3-phase 400V, 2-speed motor is running smoothly! Geared head with 4 speeds. 15, 30, 45, and 90 RPM. Quick clamping mechanism. Brand new, original MEP clamping jaws. Emergency stop. Coolant pump located in the machine base. Mitre cuts are possible. Square cutting capacity: 95x95mm. Maximum saw blade diameter: 350mm. Includes 2 x 350mm saw blades. Hodezawmyopfx Ahget Made in Italy. Weight: 480 kg. Contact us for shipping options! €2,000.00

Condition: good (used), Year of construction: 2008, Manufacturer: EBG-TECH Type: BMW N-63 Hedpfx Aof Ecwzehgst Year: 2008 Max. disk diameter: 300 mm Overall size: 1900 x 1200 x 2900 mm Weight: 1750 kg

Year of construction: 2008, condition: excellent (used), Miter Saw - Cutting Center STROMAB model CT 800 Year 2008 Hsdpfx Ajkzhffjhget

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic optimising end cutting saw PAUL 11 MKL MAXI 5 Premium Year 2006 Input table automatic (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included. Hjdpezraaxefx Ahget

Condition: used, Year of construction: 1999, total height: 1,800 mm, total length: 5,700 mm, total width: 2,300 mm, Colour: White Weight: 2.000 kg - Year: 1999 - Documentation available: No - CE certificate present: No Hodpfx Ahszmxvzjgst - Serial number: 10.7488 - Main motor power [kW]: 6.3 - Max. saw length [mm]: 5200 - Max. saw width [mm]: 360 - Max. saw blade diameter [mm]: 600 - Input table length [mm]: 5200 - Output table length [mm]: 3300 - Options: Automatic pusher system - Transport dimensions: 5700mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long Hedpfx Asngz N Iehgst 1 piece 140 mm Ø x 190 mm Ø x 173 mm long

Condition: excellent (used), CATALOGUE NUMBER 7958 TECHNICAL DATA - Maximum cutting height: 120mm - Shaft width: 510mm - Shaft diameter: 75mm - Maximum sawblade diameter: 400mm – From above: - 2 rows of anti-kickback fingers - toothed feed roller - toothed outfeed roller Hsdpfszulypox Ahget – From below: - anti-kickback fingers - 2 toothed feed rollers - arbor with sawblade - toothed outfeed roller - 6 feed speeds - Hydraulic motor (for extension, feed, rollers): 3kW - Main motor: 22kW - Infinitely variable feed speed - Control stand dimensions: 700x600x1000mm - Overall dimensions (L/W/H): 2300x1450x1600mm - Weight approx. 2650kg ADVANTAGES – Turkish production – Robust construction – Used machine, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 117, saw blade diameter: 800 mm, cutting height (max.): 300 mm, input voltage: 400 V, saw drive: 15,000 W, operating pressure: 6 bar, Solid and powerful machine for carpentry and timber construction. Longitudinal cuts up to 300 mm cutting height. 800 mm saw blade for a large cross-cutting range, mounted on a rotary table. This allows nearly any mitre angle to be set. Longitudinal cuts, trimming, notching, wedge planks – everything is possible. The double-sided feed system effortlessly processes even large beams through the machine. In cross-cutting mode, the feed pistons serve as hold-downs. Two-hand operation ensures safe usage. The integrated support in the machine provides 3 m roller conveyors on both the left and right sides. The support options can be expanded by using tall, stable 3-roller supports (optional). Hsdpsv Nktbofx Ahget The machine is tested and in good condition. Both digital displays including sensors are new (repairs alone cost €5,000). Many hoses have been replaced. The pneumatic unit has been serviced. Everything else was in excellent condition due to the machine's robust design!

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. Hedpfx Ahev Iccfjgot • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve Hsdpfx Aewb Hxvohget - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Year of construction: 2002, condition: excellent (used), SAW KUAG CUT 110 for PP , PE or PVC PIPE With central pipe fixation Cutting and Chamfering without sawdust Cutting with a cutting roller/Circular knife or cutting steel and Carbide insert Min. Pipe diameter 20 mm, Max Pipe diameter 110 mm Hsdpeu D Udwjfx Ahget Year of construction: 2002 Condition: very good Hablamos español Nous parlons français We speak English

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: Hodsiyyc Eepfx Ahgst 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: excellent (used), IM Very good condition. Hjdjxclluepfx Ahgot

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, mobile circular saw for cutting bricks with extraction Hjdpev Ivx Tsfx Ahgot

Condition: ready for operation (used), Year of construction: 2011, Omga Double Mitre Saw TR2A NC with semi-automatic operating cycle and pneumatic control Motor power: 2.2 kW per unit Total power: 5.02 kW Hsdjy Sinzspfx Ahgot Workpiece dimensions for straight cuts Height: 80 mm or 90 mm Depth: 145 mm or 132 mm Workpiece dimensions at 45° Height: 80 mm or 90 mm Depth: 102 mm or 93 mm Min. length straight: 225 mm Min. length 45°: 385 mm Max. length: 2800 mm Saw blade diameter: 300 mm Motor speed: 3000 rpm Space requirement: 3830 x 1100 x 1600 mm

Condition: new, CNC Panel Saw Wehrmann WT-38/1040 New machine For the conventional cutting of workpieces made of wood/wood-based materials with laminate (CLP, HLP), paper, foil or veneer Panel dimensions + data (finished panel): Length: from 140 mm Width: min. (finished dimension) 38+38 mm Width: max. (finished dimension) 520+520 mm (asymmetrical cutting is possible) Thickness: 8 mm - 40 mm Weight: approx. max. 30 kg Workpiece shape: rectangular Basic structure: - User-friendly combination machine with adjustable zero line - All drives and adjustments are servo-controlled - The machining motors are frequency-controlled. - Stable steel welded construction - Workpiece transport is carried out by means of a transport belt and height-adjustable top pressure. Base machine: - Sound-absorbing/protective hood with safety interlock - The required connection nozzles for an external extraction system with an air velocity of min. 28 m/sec. (underpressure 2480PA) - A compressed air connection incl. maintenance unit. - Integrated control cabinet with cooling unit for operating the machine at an ambient temperature of 10 - 45 degrees Celsius Hsdpfx Ajzvdw Njhgot - PC control Beckhoff - Safety and protection devices according to CE guidelines - CE marking Feed rate v= 5 - 40 m/min servo-controlled drive Electronic height adjustment of 5 - 45mm adjustable via Beckhoff servo axis Stop ruler made of Teflon on the right side of the machine adjustable via Beckhoff servo axis Infeed ruler on the left with pneumatically sprung unit adjustable via Beckhoff servo axes Machine equipment: Unit 1: Slitting saw, frequency-controlled Milling stand with column guide and connecting plate Motor Perske 4.4 KW 50 Hz 400 Volt 4500 RPM. Tool holder D = 35 keyway External + internal thread right / left, controllable via servo drive, operating in the same direction, not swiveling with height adjustment via Beckhoff servo axis Lateral adjustment with mechanical digital display Saw blade max. 350 mm without tools Flow-optimized extraction hoods Unit 2: Saw motor, frequency-controlled Milling stand with column guide and connecting plate Saw motor not controllable, operating in the opposite direction Motor Perske 6 KW 50 Hz 400 Volt 5000 RPM. Tool holder D = 35 wedge shaft with external + internal thread right / left Saw blade max. D400 mm without tools with manually adjustable splitting wedge with height adjustment via Beckhoff servo axis Lateral adjustment with mechanical digital display Flow-optimized extraction hoods Beckhoff control technology - PC-based control system with integrated PLC and electronic path control - Virtually unlimited program memory - Operation via keyboard / mouse / touch - Reporting system for operator and error messages - MDE Basic for recording machine data, production time, set-up time, downtime, fault time, quantity and adjustable recording period - Fast data exchange between control and I/O component via EtherCat - Uninterruptible power supply for panel PC - Feed lock for adjacent machines or transport - Powerful panel PC with integrated 15.6 inch display with touch screen, integrated keypad, keyboard and mouse - USB port - Fast EtherCat interface (field bus) - Ethernet network connection RJ45 - Operating system Windows with TwinCat 3 system for real-time control

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 035-110235, saw blade diameter: 650 mm, cutting height (max.): 245 mm, rotational speed (max.): 2,800 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 650 mm Maximum cutting height: 245 mm Speed: 2,800 rpm Hsdjxpvtiepfx Ahgst Bore diameter: 30 mm Riving knife thickness: 5.4 mm Kerf width: 13 mm Saw blade height at 90 degrees: 245 mm Saw blade height at 45 degrees: 164 mm Saw blade height at 30 degrees: 113 mm Type of input power: Three-phase MACHINE DETAILS Motor power: 10 kW Motor speed: 3,000 rpm Electric saw blade tilt: 90° - 30°, with digital display Rotary table range: 30° - 150° Electrical Data Phases: 3 + N + PE Voltage: 400 V Frequency: 50 Hz Current consumption: 17 A EQUIPMENT Automatic guarding hood Pneumatic cross feed Laser for length cutting

Condition: used, OMGA T421 IDC000097 - saw blade diameter: 400 mm Hodpfx Aju Dhupohgjt - complete with saw dust filter

Year of construction: 2007, condition: excellent (used), functionality: fully functional, REMONNAY edging and resawing machine, type DR8/225, manufactured in 2007. 7-position variable adjustment, 2 x 110 kW motors each. Pre-trimming saws for side boards. Cutting height 225 mm. S-type singulation with infeed roller table. Includes tilting and aligning table. Chip separator with two deflectors. Board cross conveyor. Hsdpjfcltgsfx Ahget Roller conveyor with stripping device. Electrical control cabinet with control panel. Includes all accessories (circular saws, etc.).

Year of construction: 2011, condition: like new (used), functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min): 25 Pneumatic tilting of heads External tilt 45° Hodpfxsx A Ar So Ahget Mechanical adjustment of intermediate angles Hydropneumatic blade feed Usable cutting length (mm): 4,000 Minimum standard cut at 2 heads at 90° (mm): 310 Blade diameter (mm): 450

Condition: used, Year of construction: 2007, machine/vehicle number: 1377, SECOND HAND PNEUMATIC END CUTTING SAW STROMAB MOD. TR500 - CE RULES - with electronic positioning stop TIGERSTOP of 4000mm - infeed roller table of 4500mm - outfeed roller table of 4500mm - blade diameter: 500mm - maximum cutting capacity: 360 mm (L) at 60 mm (H), 135 mm (H) at 280 mm (L) - 10 hp motor - 415 volts Hsdpfet U Izpsx Ahgst - serial number: 1377 - year 2007