Used Esko Label - Prepress for sale (1,596)

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Djdpeyfvwbjfx Albjkt Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: like new (used), CFT Master RS 32/40/6 Automatic Triblock – Rinsing + Filling + Capping Machine AROL The CFT Master RS 32/40/6 automatic triblock is designed to integrate rinsing, filling, and capping operations for containers into a single machine within industrial beverage and liquid product lines. The equipment combines three synchronized rotary modules: a 32-position rinsing unit, a 40-valve filling unit, and a 6-head AROL capping unit, according to the 32/40/6 configuration indicated on the machine itself. This arrangement allows the entire process to be carried out, from the hygienic preparation of the empty container to its output filled and sealed, reducing transfers between independent machines. MAIN FEATURES Dedpfx Alex S Ix Sjbjkt -Manufacturer: CFT -Series / Model: Master RS -Configuration: 32/40/6 -Type: Automatic rinsing, filling, and capping triblock -Rotary rinsing unit: 32 positions -Rotary filling unit: 40 valves -Capping unit: AROL -Number of capping heads: 6 -Three operations integrated into a single monoblock -Automatic container feed -Synchronized transfer between modules -Internal rinsing of containers -Automatic continuous filling -Automatic cap feed and positioning -Automatic closing by AROL capping unit -Inlet and outlet transport system -Pressure instrumentation -Construction mainly in stainless steel -Enclosures and safety guards -Hygienic design for the food industry -Prepared for continuous industrial production PROCESS Empty containers automatically enter the CFT Master RS and are initially transferred to the 32-position rinsing unit, where the interior is cleaned before filling. Subsequently, they pass directly to the 40-valve filling carousel, where the product is dispensed continuously and in a synchronized manner. Once filled, the containers are transferred to the 6-head AROL capping unit, which is responsible for placing and sealing the cap. Finally, the containers automatically exit to the next stages of the line. It can be integrated with: -Depalletizers -Container conveyors -Product preparation and treatment systems -Cap feeders and orienters -Level and closure inspectors -Labeling machines -Coders -Cartoning machines -Palletizers APPLICATIONS Particularly suitable for beverage, juice, and other packaged liquid product manufacturers who need to centralize rinsing, filling, and capping operations in a single automatic unit. Container formats, product type, the exact filling system, cap type, and production capacity will depend on the configuration and tooling currently installed. The CFT Master RS 32/40/6 configuration with an AROL capping unit provides a compact solution to automate three of the main operations in a packaging line. Machine available for inspection. Additional technical information, container formats, production speed, filling type, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), ZILLI & BELLINI Automatic Sealing Machine with 12-Piston Filling Unit – Stainless Steel Automatic sealing machine from ZILLI & BELLINI with a 12-piston filling unit, designed to integrate the dispensing of the product and the subsequent hermetic sealing of containers within an automated industrial line. The unit combines a filling system with 12 pistons and an automatic sealing section, allowing both operations to be performed in a synchronized and continuous manner. The piston filling technology is particularly suitable for products whose dispensing requires repeatable volumetric control. Its construction, primarily in stainless steel, along with the complete enclosure of the work areas and the integrated control panel, makes it suitable for professional installations in the food and canning industry. MAIN FEATURES -Manufacturer: ZILLI & BELLINI -Type: Automatic filler + sealer -Filling unit: 12 pistons -Volumetric dispensing system -Automatic and continuous filling -Automatic container feeding -Synchronized positioning and transfer -Rotary processing system Dsdpfx Aszxwxfolbjkt -Dispensing via pistons -Automatic sealing section -Cap feeding / positioning according to configuration -Continuous industrial operation -Construction primarily in stainless steel -Complete enclosure of work areas -Doors with inspection windows -Integrated control panel -Safety guards -Structure on adjustable supports -Integrable into complete packaging lines PROCESS Containers are automatically fed into the machine and transferred to the 12-piston filling unit. The system performs a controlled volumetric dispensing, introducing the pre-set amount of product into each container. Once filling is complete, the containers are automatically transferred to the sealing section. In this second stage, the caps are positioned on the containers, and the corresponding mechanical sealing is performed, resulting in a product that is ready to continue to the subsequent operations in the line. It can be integrated with: -Container depalletizers -Washing / rinsing machines -Product feeders -Cap feeding systems -Conveyors -Weight checkers -Inspection equipment -Pasteurizers -Autoclaves / retorts -Labeling machines -Cartoning machines -Palletizers APPLICATIONS Particularly suitable for canning companies and manufacturers of packaged food products that need to automate the filling and sealing operations simultaneously. The 12-piston system may be suitable for various liquid, semi-liquid, or viscous products, depending on the product characteristics and the specific configuration of the equipment. Container formats, dispensing volumes, compatible products, and the type of sealing will depend on the tooling and configuration currently installed. The combination of ZILLI & BELLINI technology, 12-piston filling, and automatic sealing provides a compact solution for continuous industrial packaging lines. Machine available for inspection. Additional technical information, formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), TECHMI Automatic Filling and Capping Machine – Stainless Steel TECHMI automatic filling and capping machine, designed to integrate the operations of product dosing/filling and subsequent placement and closing of caps or capsules onto containers in a single machine, for use in industrial packaging lines. The equipment features a compact configuration with automatic container transport, filling stations, and a capping system, allowing both operations to be performed sequentially and automatically. Its enclosed design with transparent guards also provides safety and visual access to the work area. Primarily constructed from stainless steel, it is particularly suitable for professional installations in the food and packaging industries. MAIN FEATURES -Manufacturer: TECHMI -Type: Automatic filling and capping machine -Integrated operations: filling + capping/closing -Automatic operation -Continuous container feeding -Automatic positioning at workstations -Dosing/filling system -Automatic cap or capsule placement system -Closing head -Automatic transfer between operations -Integrated infeed and outfeed conveyor -Primarily stainless steel construction -Control panel/HMI -Adjustments for format adaptation -Complete enclosure with transparent guards -Compact design for inline integration -Industrial construction for continuous operation PROCESS Containers enter automatically via the conveyor and are positioned at the different stations of the machine. In the first phase, the product is dosed into the container. Subsequently, the filled container is transferred to the capping section, where the cap or capsule is placed and closed. Once both operations are completed, the closed containers are automatically discharged to the next stage of the line. Can be integrated with: Dedpfex S E Spox Albskt Container feeders Product preparation and feeding systems Cap feeders/orienters Conveyors Weight checkers Detectors and inspection systems Labeling machines Coders Case packers End-of-line equipment APPLICATIONS Particularly suitable for food industries, canning companies, sauce, cream, puree, condiment manufacturers, and other packaging companies that require automating filling and closing operations. The exact product configuration, dosing volume, container format, and cap type will depend on the equipment and format currently installed in the machine. The combination of TECHMI filling and capping in a single automatic unit provides a compact solution to reduce transfers between equipment and automate the packaging process. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, mileage: 277,856 km, power: 324 kW (440.52 HP), first registration: 10/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: beige, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2014, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGS 26.440 6x2/4BL Meiller AK16 Demountable Body VIN: W202734 Chassis / Components: * Leaf / Air Suspension * 2nd Axle = Lift / Steerable Axle * Wheelbase: 1-2 = 2,600 mm / 2-3 = 1,350 mm * Tires: 315/80 R.22.5 * Remaining Tire Tread: Axle 1: 30% / Axle 2: 0/90% / Axle 3: 40% * 1 x Aluminum Diesel Tank 310 L * 1 x Hydraulic Tank Meiller * 1 x AdBlue Tank Body: * Meiller AK 16 Telescopic Demountable Body * Remote Control * Lifting Capacity (Load Capacity) 17,000 kg, max. Pressure 275 bar * Hydraulic Container Locking System 4 x Side * 2 x Container Stops Front, Manual * 1 x Container Hook at the Rear * Hydraulic Rear Supports Cab / Cockpit * TGS M Cab * Automatic Climate Control * Roof Hatch * Hands-free System * AUX, USB * Radio * Cruise Control Engine / Transmission * 324 kW / 440 HP // 12,419 cm³ // Euro 6b * ZF Automatic Transmission * Engine Brake * Differential Lock * Power Take-Off Weights * Gross Vehicle Weight 26,000 kg * Payload 13,800 kg * Tare Weight 12,200 kg Other * German Vehicle * 1 Previous Owner New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a variety of vehicles. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Dodpfx Aozig Taslbokt Daytime license plates / Export license plates We will gladly help you in obtaining export license plates/short-term license plates. Processing of customs formalities We will gladly help you with the processing of customs matters.

Condition: used, Year of construction: 2008, Langguth Box Labeler Dodpezx Dd Iofx Albskt

Condition: used, Depalletizer and Palletizer – Flema Star C-LC For NRW and Euro crates as well as Euro and beer pallets, 500 crates/hour, Year: 1996, empty crates in from left, full crates out to the right. Crate Unpacker – RICO UNO 1-Head Type 124 For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 350 crates/hour, Year: 2010, right-to-left operation. Bottle Cap and Cork Remover – ADELSKI Type PPE 2005 For NRW, Euro, and Ale 0.5l bottles, 2,000–12,500 bottles/hour, Year: , Operating hours: 8,500, right-to-left operation. Bottle Washer – PAC CB 14-0.5l-R-7 LII Compact For NRW, Euro, and Ale 0.33l and 0.5l bottles, 7,500 bottles/hour, Year: 1998, Machine No. 125, Operating hours: 14,175. Bottle Inspection – SYSCONA LC 10 FD Caustic control + metal detection, Year: 2007. Filler – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 For NRW, Euro, and Ale 0.33l and 0.5l bottles, incl. product pump, 6,000 bottles/hour, Year: 2011, Operating hours: 7,200, right-to-left operation. Labelling Machine – ANKER Roland 8/3 Dkedpfozx Dmpex Albet For NRW, Euro, and Ale 0.33l bottles, 7,000 bottles/hour, Year: 1998, Operating hours: 14,500, left-to-right operation. Inkjet Printer – Keyence MK-G1000 Year: 2022, currently configured for date coding on rear label of ANKER Roland 8/3. Crate Packer – RICO UNO 1-Head L-Machine For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 300 crates/hour, Year: 2012, left-to-right operation. Premixer – Jakü PM-E-30-2k For degassing and carbonation, with product tank and 2K Bran+Lübbe pump, 35 hl/h, Year: 1992. Crate Washer – RICO 2500 1-Bath For NRW and Euro crates, 600 crates/hour, Year: 2012, right-to-left operation. 2 CIP Tanks, each 6 hl Steam-heated for filler CIP, with disk change system, Year: 2012.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi Dedpfx Alozx Ri Dsbjkt • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. Dodpfjw Imp Hox Albekt The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Condition: good (used), Year of construction: 2018, KONICA MINOLTA ACCURIOLABEL 190 Year of Manufacture: 2018 _____ Machine Specifications and Equipment:  Total Print Count: ONLY 0.4 million  Web width: 330 mm  Print Speed: Up to 60 ppm  Resolution: 1200 x 1200 dpi  Paper Formats: A6 - SRA3, custom sizes  Duplex Printing: Yes  Connectivity: USB, Ethernet  Toner System: Simitri HD polymerized toner Djdpfxoyz Ac Dj Albskt  All spare parts replaced by KONICA MINOLTA GERMANY – like new.

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data - Line type: Returnable glass bottling line - Application: Beverage filling in returnable glass bottles - Formats: 0.33 L and 0.75 L glass bottles - Packaging: Bottles in crates - Filler capacity: 18,000 bottles/hour - Premix capacity: 22,000 L/hour - Closure type: Plastic screw caps - Labelling: Wet glue labelling, 2 aggregates - Main machine years: 1996 – 2016 - Dismantling planned: February 2027 Scope of Delivery - Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated - Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 - Crate Decapper | RINK | KM 690/4K | 2012 - Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 - Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 - Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 - Empty Bottle Inspector | Krones | Linatronic | 2014 - Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 - Labelling Machine | Krones | Universella | 2012 - Closure Inspection | Syscona | Expert FHK | 2016 - Inspection System | Krones | Checkmat 731 | 2012 - Crate Packer | Kettner | 1996 - Crate Inspection | Krones | Checkmat 708 | 2011 - Palletizer | Matec | Rotomat 3B | 2002 - Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000 Dkedsza Tx Sepfx Albot

Condition: used, Year of construction: 2005, Overview The bottle washer was previously used in a mineral water factory. Due to the good maintenance, the machine is in good condition. All basins and the machine body are made of stainless steel. The machine is still working and will be free in early 2027, when the complete line is replaced. Tech Specs - Capacity: 15,500 bph Dkodpfxszbha Hj Albjt - Cell Pitch: 95mm - Bottles per row: 16 - Dimensions + Weights: Housing: 8350 x 1,860 x 2,990 mm / 21,750kg Ready for operation with attachments: 8,700 x 3,560 x 3,330mm / 37,639kg - YOM 2005 - Formats: - 0,5l - 0,75l The Machine in Detail / Equipment Features - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Label press mounted to the machine - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge

Condition: used, Year of construction: 2012, Overview This RINK KM 690/4K empty bottle unscrewing machine, manufactured in , is designed for the automatic removal of screw caps from returnable empty bottles directly inside the crate. The machine is installed in the empty bottle infeed section and removes screw closures before the bottles are transported further towards the bottle washer. The machine is equipped with 4 units, each with 4 x 3 unscrewing heads, allowing multiple bottles to be processed in parallel inside the crate. In operation, the crates are transported continuously under the unscrewing sections. The head units lower cyclically onto the bottles, unscrew the closures and then return to the upper home position. The machine is operated via a Siemens SIMATIC Panel touch display integrated into the stainless steel control cabinet. Technical Data - Manufacturer: RINK GmbH & Co. KG - Machine Type: Empty bottle unscrewing machine - Model / Type: KM 690/4K - Year of Manufacture: Application: Unscrewing / removal of screw caps from returnable empty bottles inside crates - Equipment: 4 units, each with 4 x 3 unscrewing heads - Operation: Automatic crate transport under cyclic lowering unscrewing units - HMI / Control: Siemens SIMATIC Panel touch display - Signal Tower: Red / orange / green status light - Safety: Stainless steel enclosure with transparent sliding doors and safety warning labels - Electrical Supply: 230 / 400 V, 50 Hz - Connected Load: 18 kVA - Current: 25 A - Condition: Used, installed in industrial returnable bottle line Dkedpfezcgppsx Albot

Condition: used, inner taper of milling spindel / Dkodpfxezcq Hre Albet collet diameter / turning speed range / U/min

Condition: used, inner taper of milling spindel / collet diameter / turning speed range / U/min Dkodpfx Alozcq H Ejbjt

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) Dksdpezxc Ncsfx Albst - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: good (used), Approx. 4–500 units, Isoco, Euro container / small load carrier RL-KLT 6147 – used: Dkjdpfx Ajzv Ip Aslbst Price per unit, ex works: €3.50 (net)! Manufacturer: Isoco Type: RL-KLT 6147 Year of manufacture: unknown Dimensions (L x W x H): 600 x 400 x 147 mm Weight: approx. 1.82 kg Smooth bottom With drain holes Blue Manufactured according to VDA standard 4500 Smooth container bottom with water drain holes Ideal for automated logistics processes Lid slots for matching top lids Integrated label areas for barcode labeling Temperature resistant from -20 °C to +100 °C New price: approx. €8.39 Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: new, mileage: 17 km, power: 235 kW (319.51 HP), fuel type: diesel, empty load weight: 7,695 kg, maximum load weight: 10,305 kg, overall weight: 18,000 kg, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 4,185 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 7,070 mm, Year of construction: 2025, construction height: 3,090 mm, Equipment: ABS, additional headlights, air conditioning, central locking, cruise control, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, Euro Cargo ML180E32 4x2 GSR roll-off tipper, 235 kW/320 hp, available in approximately 4 months - ZF Powerline automatic transmission - Air suspension, rear - Wheelbase: 4185 mm - Differential lock - Steel front bumper - Underrun protection, rear - CAN bus interface, open for body control - Trailer version - Protective grille for headlights - Sun visor - Window in rear wall of driver's cab - Trailer socket for 24V, 15-pole - Air conditioning - Mirrors, electrically adjustable/heated - Trailer coupling, pintle, 40 mm, D100 kN - Armrest for driver's seat, right side - Rear cross member, D100 kN - Air compressor, 360 ccm - Comfort driver's seat, adjustable in 4 ways - Trailer coupling manufacturer: Rockinger - Tires: 295/80R22.5 M+S - Iveco radio, DAB+, CD, Bluetooth - Fuel tank, 200 liters, plastic - Cab color: RAL 6005 green, white, or custom RAL! - Pintle coupling, Rockinger, trailer load: 20000 kg - Ball hitch trailer coupling, 3500 kg, 24V/12V converter optional, 2000 EUR plus VAT - Yellow rotating beacons, optional Roll-off system, 14t, mounted on Iveco 18t chassis - Lifting and tilting capacity: 14000 kg - Dual speed (fast gear) - Hook height: 1570 mm according to DIN 30722-1 - Possible container lengths: 4.0 m - 5.5 m Dkjdpfxozv Nu To Albot - Telescopic arm - Optional with tele/articulating arm! Container lengths: 3.5 m - 5.5 m (shallower loading angle) - Mechanical hook locking - Hydraulic internal locking - Cable remote control - Operation on the device additionally - Emergency stop function - Hydraulic pump and hydraulic tank, 100 liters - Paint: Black RAL 9011 Graphite Black, rollers RAL 9011 Graphite Black - Storage box - CE certificate Errors and prior sale excepted ?si=ziu9RYr5J51_3XAN ?si=S0X7xrz6L56O2c2o ... Air conditioning, automatic transmission, VAT can be shown, ASR, ABS, sunroof, multifunction steering wheel, radio, on-board computer, cruise control, electric windows front+rear, electric central locking, remote central locking, trailer coupling, power steering, tachograph, differential lock, outside temperature gauge, tinted windows, tachograph, cab: short cab, air-suspended driver's seat, electric windows, additional headlights, tilting hydraulics, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, HSN 4192, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, emission badge: 4 - Green, tire pressure indicator

Condition: excellent (used), ZACMI 40-Cup Rotary Telescopic Filler – Stainless Steel ZACMI automatic telescopic filler with 40 cups, designed for the volumetric filling of solid and particulate food products into containers within continuous industrial production lines. Manufactured by ZACMI, the machine features a rotary telescopic filling system with 40 dosing cups, enabling the automatic and continuous feeding, dosing, and filling of the containers. This type of technology is particularly interesting for the canning industry, where a regular volumetric dosage of solid or particulate products is required, along with their proper introduction into cans or other rigid containers. Its construction, primarily in stainless steel, along with the rotary carousel and automatic transport systems, provides a robust solution for high-production industrial lines. MAIN FEATURES -Manufacturer: ZACMI -Type: Automatic telescopic filler -Number of dosing cups: 40 -Telescopic volumetric filling system -Rotary configuration -Multiple filling stations -Automatic product dosing -Automatic container handling -Continuous container input and output -Integrated conveyor -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial production -Integrable into automatic canning lines APPLICATION The ZACMI filler is designed to perform continuous volumetric filling using a rotary system with 40 cups. The containers are automatically fed and transferred to the filling carousel. During the cycle, the dosing cups control the amount of product and transfer it into the container. Once filled, the containers automatically continue to the next stage of production. It can be integrated with: -Product feeding systems -Can feeders and conveyors -Liquid or brine dosing systems -Can sealers -Lid feeders -Weight checkers -Container washers -Pasteurizers and autoclaves -Labeling and end-of-line equipment APPLICATIONS Especially suitable for canning industries and processors of vegetables, legumes, and other solid or particulate foods that require a high-capacity automatic filling system. Depending on its configuration and installed format, it can be used with vegetables, legumes, olives, and other solid or particulate products intended for canning. The combination of 40 cups, rotary operation, and telescopic filling technology makes this ZACMI a particularly interesting solution for continuous production canning lines. Machine available for inspection. Dsdpfezw Dbwex Albokt Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), FERRUM F504 Automatic Can Seamer – 4 Heads FERRUM F504 automatic can seamer, designed for the hermetic sealing of metal containers using a double seam in industrial production and food packaging lines. Manufactured by FERRUM, a specialist in can seaming technology, the F504 features 4 seaming heads and is designed to operate automatically and continuously, providing uniform and reliable sealing between the container body and the lid. Its fully enclosed design, industrial construction, and safety systems make it particularly suitable for canning lines with medium to high production volumes. MAIN FEATURES - Manufacturer: FERRUM - Model: F504 - Type: Automatic can seamer - Number of seaming heads: 4 - Seaming system with double seam - Automatic rotary operation - Continuous container feed - Automatic can positioning - Automatic lid and container sealing - Continuous industrial production - Robust construction for intensive use - Complete enclosure of the work area - Access doors for inspection and maintenance - Guards and safety systems - Integrable into automatic filling and seaming lines APPLICATION The FERRUM F504 is designed to automatically perform the hermetic sealing of cans by forming the double seam between the container body and its corresponding lid. The cans are continuously fed and transferred to the seaming stations. The 4 heads allow the process to be carried out in a rotary and continuous manner before discharging the containers to the next stage of production. It can be integrated with: Can fillers Product dosing machines Lid feeders Container conveyors Can washing and drying machines Weight checkers Dkodpfx Alezw D Scebot Inspection systems Pasteurizers Autoclaves / retorts Labeling machines and end-of-line equipment APPLICATIONS Particularly suitable for canning industries, processors of fish and seafood, vegetables, meat products, pet food, and manufacturers of canned foods that require a reliable and continuous automatic seaming system. The combination of FERRUM technology, model F504, and a 4-head configuration provides a particularly interesting solution for automatic industrial filling and can seaming lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2007, condition: good (used), functionality: fully functional, Printing and Coating • 5 letterpress printing units • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, barcodes, screens and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable and controlled web transport throughout the complete production process Laminating and Converting • Inline laminating unit Dodoztqlzspfx Albskt • Suitable for the production of laminated and multilayer labels • Laminating section can be used independently • Separate operation possible together with one printing unit • Machine can therefore also be used as a dedicated converting and finishing line Die-Cutting and Finishing • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability • Flexible processing of different label formats and repeat lengths Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control • Reduction of production waste and defective material _____ WHY THIS VIVA CODIMAG 340? • High-Quality Letterpress Printing The letterpress printing process provides sharp text, clean lines, strong color coverage and precise reproduction of small details. This makes the machine especially suitable for self-adhesive labels, pharmaceutical labels, cosmetic labels, food labels, barcode applications and other demanding narrow-web products. • Five Printing Units Plus Varnishing The machine is equipped with five letterpress printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and subsequently protected or visually enhanced with a varnish in one continuous production process. • Independent Converting Capability One of the most important advantages of this machine is the flexible configuration of the laminating and converting section. This section can be operated separately together with one printing unit, allowing the machine to be used as a dedicated converting line for: • Laminating • Varnishing • Die-cutting • Slitting • Perforating • Rewinding This provides additional production capacity even when the complete printing section is not required. • Inline Laminating Unit The integrated laminating unit enables the production of protected, multilayer or enhanced label products. Laminating increases the durability of the finished label and can improve resistance against moisture, chemicals, abrasion and mechanical stress. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit provides flexibility for different label formats and repeat lengths. It is particularly suitable for short and medium production runs where frequent job changes and flexible format handling are important. • Complete Inline Production Printing, varnishing, laminating, die-cutting, perforating, slitting and rewinding can be completed within one production line. This reduces material handling, minimizes intermediate production stages and improves overall production efficiency. • UV Drying Technology The UV drying system enables immediate curing of inks and varnishes. This supports high-quality production, stable print results and direct further processing of the printed material within the machine.

Year of construction: 1998, condition: good (used), functionality: fully functional, Nilpeter Model: F3000 Machine No.: F-2002 Year of manufacture: Approx. 1994–1998 Please note: The exact year cannot currently be confirmed due to a damaged machine identification plate. Printing process: Flexographic printing + Screen printing Flexographic printing units: 5 Screen-printing units: 2 Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 5 flexographic printing units • 2 screen-printing units • Combination of flexographic and screen printing within one production line • Suitable for standard as well as specialty label applications • Possibility to apply high-opacity inks, whites, and special effects through the screen-printing units _____ Drying System • 5 UV drying units • 5 hot-air drying units • Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements • Flexible drying configuration for different materials and coating applications _____ Web Handling • Unwinding section • Web transport through the complete production line • Turnbar system • Delamination / relamination system • Suitable for reverse-side printing and multilayer label applications • Stable web handling throughout the production process _____ Laminating Section • Integrated laminating unit • Suitable for protective lamination • Suitable for multilayer label structures • Allows inline finishing without the need for a separate laminating machine _____ DIE-CUTTING AND CONVERTING The machine is equipped with an extensive converting section: • 3 rotary die-cutting stations • 1 additional die-cutting station for sheet delivery • Integrated sheet delivery • Suitable for multiple cutting, perforating, and converting operations • Flexible configuration for different label and converting applications _____ SHEET DELIVERY • Integrated sheet delivery system • Additional die-cutting station dedicated to sheet production • Enables the machine to produce both roll-to-roll and roll-to-sheet products • Additional flexibility for specialty applications _____ INCLUDED ACCESSORIES The machine is supplied with a considerable quantity of production tooling and accessories. Magnetic Cylinders • 10 magnetic cylinders Anilox Rollers • 21 anilox rollers Dsdpfsztqrnjx Albskt Printing and Rubber Rollers • 5 rubber rollers • 10 printing rollers Additional Tooling • Various additional cylinders • 1 new slitting cylinder • Further tooling available with the machine The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation. _____

Condition: good (used), functionality: fully functional, For sale is a robust Bohm & Kruse continuous printing machine for printing on wood parts, especially wine crates, wooden boxes, and similar workpieces. The machine operates in a continuous process and is equipped with a printing roller. Letters and numbers can be used according to the desired lettering and used to print the workpieces. A large stock of letters and numbers is available. Technical data / Features Manufacturer: Bohm & Kruse Maschinenfabrik Machine type: Continuous printing machine / Wood printing machine Suitable for printing wine crates and wooden boxes Continuous printing roller Mechanical workpiece feed Letters and numbers can be used for individual labeling Many letters and numbers available for typesetting Adjustability for different workpieces Heavy-duty industrial design Robust mechanical construction Used condition as shown in the photos Ideal for the production and individual labeling of wine crates, packaging crates, and other wood products. Transport possible for an additional charge! Dkjdpfozx U N Uex Albst The machine is currently still at the customer's site. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: excellent (used), FMC 652 Automatic Can Seamer – Stainless Steel The FMC 652 automatic can seamer is designed for continuous, hermetic sealing of metal containers using a double seaming process in industrial production and canning lines. The equipment receives pre-filled cans, positions the lid onto each container, and mechanically performs the closing operations necessary to securely join the can body with the lid. Its automatic configuration allows it to be directly integrated with fillers, depositors, and other equipment in a canning line. MAIN FEATURES -Manufacturer: FMC -Model: 652 -Type: Automatic can seamer -Application: Metal containers -Automatic and continuous operation -Mechanical double seaming system -Continuous can feed -Lid feeding and positioning system -Synchronization between container input, lid, and closing operation -Motorized industrial drive -Adjustment according to installed format -Integrated control panel -Construction primarily in stainless steel -Protective casings in mechanical areas -Compact and robust structure -Designed for continuous industrial operation -Integrable into automatic canning lines PROCESS Pre-filled cans arrive automatically at the FMC 652, where they are separated and positioned for sealing. The corresponding lid is fed and placed onto the container body. Subsequently, the closing mechanism performs the successive operations necessary to form the double seam, creating a hermetic seal between the lid and the can. Once sealed, the containers are automatically discharged and can continue to: Can washers Seam inspection systems Weight checkers Autoclaves/retorts Pasteurizers Coolers Labeling machines Djdjwn Dmdepfx Albskt Case packers Palletizers APPLICATIONS Especially suitable for canning industries processing fish, meat, vegetables, legumes, prepared meals, and other canned foods. The compatible can diameters, heights, and formats will depend on the tooling and adjustments currently installed in the seamer. The FMC 652 is a compact industrial solution for automating one of the critical operations in a canning line: achieving a uniform and hermetic mechanical seal of the metal container. Machine available for inspection. Additional technical information, can formats, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), CUOMO AGM4 Automatic Can Seamer with 24-Valve Vacuum System The CUOMO AGM4 automatic can seamer is equipped with a 24-valve vacuum system, designed for continuous operation in industrial canning lines. It evacuates air from the headspace and then hermetically seals metal containers. The system combines a 24-valve rotary unit for vacuum operation with the automatic seamer, allowing the inside of the can to be conditioned before the double seaming process. This configuration is particularly suitable for canned products where it is necessary to reduce residual air and achieve an adequate vacuum in the sealed container. MAIN FEATURES -Manufacturer: CUOMO -Model: AGM4 -Type: Automatic can seamer with vacuum system -Vacuum system: 24 valves -Automatic and continuous operation Dkodpfxszxw Aks Albot -Automatic can feeding -Can treatment under vacuum -Reduction of air in the headspace -Synchronized transfer to the seamer -Automatic cap feeding and positioning -Mechanical sealing system -Double seaming -Automatic discharge of sealed cans -Construction primarily in stainless steel -Fairings and safety guards -Electric drives -Robust industrial design -Integrable into complete canning lines PROCESS Pre-filled cans automatically enter the 24-valve unit, where the vacuum operation is performed before sealing. This process reduces the amount of air in the can, helping to achieve the required vacuum conditions after sealing. Next, the cans are synchronously transferred to the CUOMO AGM4 seamer. The lid is placed on each can, and the sealing mechanism performs the necessary operations to form the hermetic double seam between the lid and the can body. Once sealed, the cans can continue to: Can washers Seam inspection systems Weight checkers Autoclaves Pasteurizers Cooling systems Labelers Case packers Palletizers APPLICATIONS Particularly suitable for canning industries processing vegetables, fish, meat, ready meals, and other canned food products where it is necessary to control residual air and the can's vacuum before or during the sealing process. The compatible can formats and dimensions will depend on the tooling currently installed and the specific configuration of the machine. The combination of CUOMO AGM4 + 24-valve vacuum system provides an industrial solution for automatically performing the vacuum conditioning and subsequent hermetic sealing of cans. Machine available for inspection. Additional technical information, can formats, production speed, vacuum level, dimensions, additional photographs, or videos can be provided upon request.