Used End Sheet Tipping Machine for sale (71,168)

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW NEW 3 & 4 Edge Sheet Cleaning Machine NEW NEW Single-operator control Stainless steel design, mobile Maximum sheet size: up to 600 x 800 mm Pull-out collection tray at the bottom Dimensions: 2234 x 630 x 1372 mm (LxWxH) The versatility of the tray/sheet cleaner is also evident in its ability to process 4-edge trays with edge heights up to 24 mm. Contaminants are collected in a pull-out, easy-to-empty tray located beneath the cleaning unit. The machine is fully mobile and can be effortlessly moved to any desired location after use. The entire frame is shot-peened, creating surfaces that are as smooth and hygienic as possible. Connection: 400V, 1 kW, 16A CEE plug Weight: 205 kg Brand-new machine with warranty + spare parts service Fpjdpfjw S Slnex Alqjg Quality from a specialist company! Benefit from over 35 years of experience! Options: Sheet cleaning up to 600 x 1000 mm Sheet greasing/oiling Service package Delivery service Commissioning & training Visit us!

Condition: used, Year of construction: 1989, Technical details: plate width: 1600 mm Fjdpfoyvfy Tsx Alqepg plate thickness: 20 mm smallest sheet thickness: 6 mm Number of Straightening rolls: 11 straightening roll diameter: 180 mm straightening feed: 10 m/min connected load: 76 kW total power requirement: 75 kW weight of the machine ca.: 39,2 t

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, used Timesavers Model 22-Series-900-WB - DEMONSTRATION MACHINE - The machine is powered up and can be inspected by appointment! Technical data: Year of manufacture: 2023 Max. working width: 900 mm Table opening: 1 - 125 mm Conveyor speed, frequency-controlled: 2.5 - 14 m/min Electrical: Conveyor motor, frequency-controlled: 1.5 kW Table adjustment motor: 0.37 kW Electrical connections: 400 V Frequency: 50 Hz Control voltage: 24 V Total power: 28 kW Compressed air: Required air pressure: 6 bar Total air consumption: 20 l/min Total dedusting capacity: Required extraction capacity at 100 mm WG: 3,000 m³/h W Unit: Roller unit Contact roller assembly, Ø150 mm Contact roller rubber hardness 45° Shore Abrasive belt speed: 11 - 22 m/sec Abrasive belt size (L x W): 1,900 x 930 mm Total power W Unit: 15 kW B Unit: Brush unit Brush Ø200 mm Oscillation: 110 H/min Main motor: 11 kW Total power B Unit: 11 kW Machine version according to CE door switch Emergency stops at infeed and outfeed of machine Fedsyu Tfhepfx Alqjpg Unpacked machine weight: 2,060 kg Dimensions (L x W x H): approx. 1700 x 2000 x 2400 mm

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D30L/7913, Offer Number: D30L/7913 Machinetype: spring end grinding machine Make: WAFIOS Type: FEL3 Constr. year: 1980 wire diameter: 2-10 mm spring diameter: 120 mm Fodpswi Szrefx Alqopg legth of springs: 10 - 240 mm Location: In our warehouse

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Fpodpfx Alsyyahbeqeg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, overall weight: 5,200 kg, input current: 95 A, ERNST Neptun EBB 1500 is a deburring machine designed for sheet metal processing, used for cleaning and rounding the edges of parts cut by laser, punching, or flame cutting. This machine enables alternating processing of various materials such as steel sheets, aluminum, galvanized steel, or materials with protective film, thanks to its flexible deburring roller and brush set. Key features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made from different materials without the need for constant abrasive changes. • Functionality: Uses a flexible deburring roller and a set of brushes (steel or flap brushes) for deburring or edge rounding. Fedjxmhxxopfx Alqspg • Precision: Allows for the achievement of an identical and uniform radius on all edges. • Ideal solution for: Companies working with diverse materials where edge processing after cutting is required.

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Fodpfxoucw Rbe Alqopg The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: C28046-0000, Sheet Metal Tab Placement and Bonding Machine In the sheet metal tab placement machine, metal tabs are automatically positioned onto the XPS/EPS core (sandwich panels) based on a laying pattern. The metal tabs are fixed in place using adhesive dots and flush-mounted. For functional details, see the product video. Fodpfxeyw Ht Ej Alqopg Current XPS/EPS panel sizes suitable for metal tab placement: min. 1,500 x 1,500 mm max. 8,000 x 2,500 mm

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 3,100 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 2,300 kg, nominal power: 23.5 kW (31.95 HP), 12 months warranty, 1800 operating hours Fedpfsyw Hhvsx Alqepg

Year of construction: 2001, condition: used, Erichsen Universal Sheet and Strip Testing Machine Model 145-60 Condition: Used Year of manufacture: 2001 Technical Specifications Hydraulic drive Motor power max.: 11.5 kW / 1500 rpm Pump output (small pump circuit): 12.3 dm³/min Pump output (large pump circuit): 31 dm³/min Fpodpfxeyr R Uhs Alqsg Test cylinder Punching force: 665 kN / 160 bar Hydraulic test head opening Max. operating pressure: 95 bar Holding pressure: 50 bar Drawing force ranges, switchable Small drawing force range: 37 kN / 10 bar Medium drawing force range: 225 kN / 60 bar Large drawing force range: 600 kN / 160 bar Max. drawing stroke: 150 mm Max. drawing speed: 750 mm/min Drawing ram stroke display: Resolution 0.1 mm Electrical connection values Power supply: 400 V three-phase, 50 Hz Fuses: 25 AT and 35 AT Ambient operating temperature: between +5° and +50° C Dimensions, weight Dimensions (L/W/H): 1800 mm / 1320 mm / 1400 mm Net weight: approx. 2400 kg

Condition: like new (used), Year of construction: 2023, operating hours: 58 h, functionality: fully functional, machine/vehicle number: 6523036, working width: 650 mm, sheet thickness aluminum (max.): 150 mm, warranty duration: 12 months, grinding width: 650 mm, GECAM G65RRR Surplus to requirements with only 58 hours working time Fedpjwnukmefx Alqepg This machine has been re-configured to have one abrasive belt and two subsequent ScotchBrite barrel brushes ideal for processing smaller sheet metal profiles. 650mm processing width Tampico cleaning brushes on the back end of the conveyor also included. Dust extractor not included but options can be discussed Machine widely used in the automotive sector at manufacturing sites supplying BMW etc 6 months free abrasive belt supply from Finishing Aids and Tools Ltd for this machine (5 belts per position per month) For a full quotation, technical information or any questions you might have about this machine please contact us

Condition: new, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Fpedpfx Alst D D Nzsqjg Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg

Year of construction: 2008, operating hours: 3,575 h, condition: ready for operation (used), General Data Measurements height 1300 mm This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine. Application Types Fpsdpfox Sz D Iex Alqjg Other Sheet Metal Machinery

Year of construction: 2000, condition: ready for operation (used), This Manni Sandwich Panel Production Line was manufactured in 2000. It features a discontinuous line for sandwich panels with a polyurethane core, including profiling, injection, pressing, cutting, stacking, and packaging stations. Main components include a Manni PMC 291 T press, Cannon H100 RF2 polyurethane injection system, and various Tresam profiling lines. Consider the opportunity to buy this Manni Sandwich Panel Production Line. Contact us for further details regarding this machine. Fpjdox E Ef Nopfx Alqog Application Types Other Sheet Metal Machinery

Condition: like new (used), Year of construction: 2020, - 2 pneumatic clamps Foder Iiimspfx Alqspg - Mist lubrication system - depth adjustment - 400V

Condition: new, Year of construction: 2026, machine/vehicle number: NOWA, The IMIZUNI OB-4R/5800 cutter is compatible with onion solid husk blowing machines from various manufacturers. Fedpfx Aljh Hbcrjqepg Precision workmanship, solid stainless steel construction make the machine, in addition to its production advantages, aesthetically pleasing and easy to keep clean, thus facilitating production with all hygiene rules. Capacity of the cutter: with four people positioning the onions 240-280 onions per minute

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. Fpjdsynmw Rjpfx Alqeg * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 74000 € 1398.6 € 1350 mm 0,5 - 170 mm 1370 x 2200 mm 4000 m³/h 200 mm 6 bar 78 (+/-2) dB 1750 mm 2100 mm 2180 mm 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 180 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/s 10 Grinding belt speed m/s 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 20 Oscillation stroke mm 15 Rotation motor power kW 5,5 Revs 1/min 300 - 1000 Oscillation motor power kW 0,37 Grinding brush speed m/s 10,0 ACCESSORIES: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5.580,00 with Wire Brush 0,3 mm € 5.900,00 R GROUP - GRINDING BELT Motor 15 kW € 1.060,00 OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1.290,00 Conveyor belt with vacuum system - 3,0 kW - 300 mm wide € Fpjdoynmwkspfx Alqog 4.780,00 2 additional PVC coated rollers on infeed and outfeed side € 2.040,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4.510,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 4.030,00 magnetic conveying system - 2 groups, 200 x 200 mm € 13.520,00 Demagnetiser € 4.940,00 THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Fpedpfewbh Dyjx Alqeg Fintec 128 Tube finishing machine for sale Can be viewed under power with your steel tubes

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Fpodpjyupnxofx Alqsg

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. Fodpfx Asyt Nm Eelqopg The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. Fodpfjyt Nhvjx Alqspg The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, working width: 200 mm, sheet thickness (max.): 100 mm, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has only served as a showroom model and is therefore as good as new. You are always welcome to visit our showroom in Bergeijk for a viewing. 2023 Deburring and finishing machine F200 XL with vacuum support. Suitable for deburring, edge rounding, and/or grinding steel sheet parts up to 200 mm wide. Discover the advanced F200 XL finishing machine. All products ranging in size from a one-euro coin up to 200 mm wide can be processed on this powerful compact unit. Burrs and imperfections are removed at the infeed side by a grinding unit, resulting in a smooth, burr-free surface. This is followed by two oscillating combination brushes applying light pressure. The brushes ensure uniform edge rounding of all sides and holes, both around and within the flat-ground product, leading to optimal finishing quality. The F200 XL offers features such as automatic brush calibration to guarantee consistent precision, full ERP control, and seamless integration into automated production environments. In short, it is a finishing machine fully prepared for the future! We can now offer you this F200 XL - VAC showroom machine, year of manufacture 2023, optionally in combination with a WES3000 wet extraction unit and accompanying ductwork. Only available while stocks last. Fsdoyt I U Ujpfx Alqspg The machine is supplied with one year warranty excluding wear parts. Delivery ex-works Bergeijk. If required, we can also supply the machine including transport, installation, and operator training at your location. The machine can be viewed in our showroom in the Netherlands. Contact us and we will send you an attractive offer.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 80 h, functionality: fully functional, machine/vehicle number: 2623-43, working width: 1,100 mm, sheet thickness steel (max.): 100 mm, Edge Processing Machine Timesavers 32 WRBW Fodpfxsytr Hnj Alqopg - Demonstration machine, year of manufacture 2025 - Vacuum table for processing mixed materials - Automatic table cleaning - Deburring unit - Edge rounding unit - Finishing unit - Can be offered as a complete system with extraction - Installation and training by in-house service personnel

Condition: new, semi-automatic chamfering machine Design and manufacturing in England - automatic chuck with material sensor - automatic spindle start when the cutting head is moved - bar diameter 26-105 mm for smaller diameters, a second cutting head is required Fedpfx Ajgkah Tolqopg - adjustable bar support - max. chamfering / turning length 45 mm - facing & chamfering tool - precision three-jaw chuck - large chip collection container for easy cleaning - can be easily moved with a pallet truck - weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1-year warranty CE-certified OPTION: - adjustable stop + universal chamfering tool € 1,990