Used Elan Control Device for sale (50,241)

Condition: used, functionality: fully functional, mileage: 223,256 km, power: 368 kW (500.34 HP), first registration: 02/2025, fuel type: diesel, overall weight: 8,178 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control with lower operating settings - Map based topography information. Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. AEBS advanced emergency brake system Rear Camera - GSR Compliant fitted at end of frame Driver comfort Njdpezlcpiofx Abwowi Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre Parking heater 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Load 7.1 tonnes Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK AdBlue tank - 99 litre under/behind cab Technology Secondary colour information display Fleet Management System gateway - required for telematics and Dynafleet dealer fit Exterior Daytime driving lights LED, V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 8 mm Front right - 8 mm Rear left inner - 9 mm Rear left outer - 9 mm Rear right inner - 5 mm Rear right outer - 9 mm

Condition: used, Surface measuring and recording device SP6 2x feeding device PRK 6720702 1x measuring stand PST-Ue ( transverse = 165mm and vertical adjustment = 440mm) table size 650 x 450mm 1x measuring stand PST-Ve (vertical adjustment 450mm, motorized) + manual control unit; table size 650 x 178mm Perthometer S6P Without base cabinet, without the granite plate shown in the picture. Can be offered separately. i.D. * Nwodpfx Abeu N Awvswji

Condition: ready for operation (used), 27 kW, 90 degrees Celsius Nsdpfx Abjzab Syjwjwi Two units in stock. Warranty: 6 months.

Condition: ready for operation (used), 12 kW, 140 degrees Celsius. Three units in stock. Warranty: 6 months. Nwedpfxezab S He Abwji

Condition: ready for operation (used), 9 kW, 150 degrees Celsius Nwedpfszab A Ejx Abwoi Two units in stock Warranty: 6 months

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. Njdszmyviopfx Abwjwi • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Year of construction: 2012, condition: good (used), Unit comes complete with suction lift Maximum load capacity: 150 kg Width: 650 mm Height: 2000 mm Depth: 1100 mm Weight: approx. 25 kg Condition: good, second-hand Nsdpfszmyrdex Abwjwi

Condition: ready for operation (used), Siemens 6SL3040-1MA01-0AA0 Control Unit CU320-2 PN Version: E SN:T-F86060586, used, in good condition, 100% functional, delivery as shown in the photos Nwedjx Dxgnjpfx Abwsi

Year of construction: 1995, condition: excellent (used), functionality: fully functional, Robust, remotely controlled log carrier Robocontrol from Möhringer. Track gauge 980 mm. Carrier height 430 mm. Fully hydraulic. Travel speed: 100 m/min. Equipped with log turning chains and a log clamping device. Nwodpfxozmyf De Abwei Robust auxiliary carrier with log turning chains. Fully hydraulic. Auxiliary carrier retraction via hydraulic brake actuator. Electrical control cabinet with control system. Cab electrically operated, with noise insulation and heating. 2 doors, front window can be opened. Equipped with operating switch. Comfort seat. Control elements and flat cable.

Condition: excellent (used), Year of construction: 2012, Vaccum Lifting Device COVAL VAC 12 FH Year of construction: 2012 Nsdpfezmwniex Abwewi Maxi loading capacity: 80 KG Suction cups diameter: Ø 150 mm Maxi spacing: 910 mm Mini spacing: 350 mm In very good condition Voltage: 380 V Dimensions (L x W x H): 1100 mm Depth: 900 mm Total height on frame: 1000 mm Total weight with support: 100 KG

Condition: used, Pump + Controller ALCATEL/ADIXEM ATH-1300M + ACT-1300M/1600 M: 1 pump type ATH-1300M Maxi pump rotation: 34 000 RPM Njdpozmwmrsfx Abwewi Flange: DN160/200/250 ISO-K 1 controller type ACT-1300M/1600 M (see technical details on photos) + 1 cable Used, functional, untested equipment

Condition: ready for operation (used), Hommel Opticline Contour 414 Wave Measuring Instrument, Measuring Device, Wave Measuring Machine Max. measuring diameter: 140 mm Max. measuring length: 300 mm Resolution: 0.1 µm Measuring accuracy (diameter): (1.0 + D/200) µm Measuring accuracy (length): (2.6 + L/200) µm Nwodpfozmwg Sex Abwei Repeatability (diameter): 0.3 µm Measuring speed: automatic, 10–80 mm/s Positioning speed: up to 200 mm/s Rotational speed: 1 rotation/s Description has been copied. You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are reserved.

Condition: ready for operation (used), Year of construction: 2009, Mahr MarSurf CD 120 Contour and Roughness Measuring Instrument, Surface Measuring Instrument Measuring range: 120mm Nedpozmtlqofx Abwswi Measuring force adjustable from 2 mN to 120 mN Mahr ST 500 measuring stand Year of manufacture: 2009 Accessories: Contour measuring probe: Mahr PCV probe arm 350 Roughness measuring probe (software license for roughness measurement has expired) Mahr calibration standard Mahr cross slide table You are welcome to come and inspect the equipment. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, For sale is a high-quality TESA Micro-Hite 3D height gauge in a large, motorized version, offered as a complete measuring workstation. This system combines precise height measurement with extended 2D/3D coordinate functions, making it ideal for use in quality assurance, metrology, and production. Particularly noteworthy is the extensive range of accessories and the existing PC connection with printing capability, which allows measurement reports to be created and documented directly. Technical specifications: Manufacturer: TESA (Switzerland) Model: Micro-Hite 3D Type: Height gauge / 3D-capable measuring column Measuring range: approx. 600 mm (large version) Resolution: up to 0.0001 mm (0.1 µm) Drive: motorized adjustment Measuring system: digital / electronic Data output: interfaces for PC / peripherals Measuring functions: Height measurement Internal and external measurement Diameter measurement Distance measurement 2D/3D point measurement Geometry and position calculations Equipment: Granite measuring plate Stable machine base Motorized measuring column Integrated control unit External PC workstation (monitor, computer, input devices) Printer for report output Accessories: Extensive set of measuring probes (ruby tips, extensions, etc.) Tool holders and fixtures Accessory case / wooden box Nwsdpfey Tkg Uex Abwsi The measuring device has already been disassembled and packed.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Nedjcnw U Djpfx Abwjwi Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2025, Description: Nwjdpfxscqy I So Abwsi IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Nwsdpfx Abjhp Rc Iewsi Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: as good as new (ex-display), Year of construction: 2026, Striebig CONTROL Type 6224 Cutting Area: L: 5300 x Hvertical: 2240 / Hhorizontal: 2100 x D: 80 mm Technical Data: Saw weight: approx. 1,200 kg Cutting depth: 80 mm Saw motor power: 5.5 kW (7.5 HP) Saw blade diameter: 300 mm Saw blade bore: 30 mm Emission sound pressure level at workstation LpA: 89.5 dB Saw blade speed: 4,800 rpm 2 extraction ports Ø 140 mm Compressed air connection: 6-10 bar Connected load: 7.3 kW (max 10.7 kW) Power supply: 3 x 400 V / 50 Hz Continuously adjustable scoring saw unit (VSA) Nedjy Ehnyjpfx Abwowi Small parts made of aluminium Free-standing support complete, type: 6 ExpertCut Machine data provision (Industry 4.0 ready) Striebig Service Data Import / Label Layout Customized configuration of data import interface and label layout. The customer’s .csv file is checked and tested with the import drivers for cutting optimization. The label layout is adapted and prepared to customer requirements. Location: ex-stock 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available - Nwsdpfxjy A Tpqo Abwoi

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm Nwodpfx Ajw Sgm Hsbwji - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Nodpfjcdy I Rox Abwswi Immediately available Exceptional special price Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Nwsdpfxscnw T Ij Abwsi Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, DC welding unit consist of: Nwodpevxkzqofx Abwji 1 pce. Welding controller BIHLER B 10 3 pcs. Welding transformer 1 pcs. Cooler unit Welding capacity: 3 x 70 kVA Capacity of the transformer 70 kVA at 50 % ED Power voltage: 400 V, 50 Hz.

Condition: new, Year of construction: 2019, functionality: fully functional, BIHLER cards for BIHLER controls: 1 pce. BIHLER # 800-97-0355.1 1 pce. BIHLER # 800-97-0356.1 1 pce. BIHLER # 800-97-0357.1 1 pce BIHLER # 800-97-0358.1 1 pce BIHLER # 800-97-0465.1 1 pce BIHLER # 800-97-0467.1 1 pce BIHLER # 800-97-0613.1 1 pce BIHLER # 800-97-0614.1 1 pce BIHLER # 800-97-0615.1 Nwedex U D S Hopfx Abwji 1 pce. BIHLER # 800-97-0656.1

Condition: excellent (used), Year of construction: 1994, *complete with pcs. welding-tranformer 64 kVA/each welding capacity: 2 x 64 kVA nominal current: max. 160 Amp. Njdpoi T N I Nofx Abwowi