Used Ekomak Eko 45 for sale (9,636)

Condition: used, mileage: 163,685 km, power: 160 kW (217.54 HP), first registration: 04/2006, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, color: green, gearing type: automatic, total width: 2,480 mm, total height: 3,240 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, According to our "General Terms and Laid Down Conditions," without any guarantee or warranty, we are pleased to offer you, subject to prior sale, errors, and typing mistakes, the following vehicle on a non-binding basis until finalization: Unimog U5000 (437/45) (Chassis 190) First registration: 13.04.2006 165,914 km 10,767 operating hours Engine: 4,801 cc 160 kW / 218 hp TÜV valid until 04/2026 Overall length: 5,250 mm, overall width: 2,480 mm, overall height: 4,240 mm Stationary air conditioning / roof air conditioning 2 x roof-mounted work lights facing forward, one side work light each side, 2 x rotating beacons One headlamp each left and right in front of the windshield Municipal hydraulics 1 x double-acting valve + 1 x unpressurized return on driver side front, 2 x double-acting valves passenger side front, 2 x double-acting valves + 1 x unpressurized return at the rear Rear trailer hitch LED reversing lights Rear air connections (yellow + red) 2 x LED reversing lights Without sprayer body or sprayer control 1+2 seater cabin Telligent low-range transmission 8 forward + 6 reverse gears Tachograph Radio/CD Enhanced engine brake Tyres: 495/70R24 approx. 60% PLD engine electronics Water cooling Speed limiter 85 km/h Electronic hand throttle Cooling fan with viscous coupling Cruise control Bluetooth hands-free system with Nokia Radio/CD Front axle drive pneumatically engageable (all-wheel drive) EQR Electronic Quick Reverse Laedpfx Ajy Aihponcea Portal axles with planetary reduction Coil springs Differential lock Hydraulic power steering Dual-circuit braking system Disc brakes on both axles 4-channel ABS Air dryer Central tire inflation system Mechanical quick release on spring-loaded parking brake Exhaust pipe top left Constant power socket 12V Sliding rear window right Dammann interchangeable frame Dammann hydraulic system Dammann aluminum mudguards Front towing eye Price: €95,000.00 (net) All information provided without any guarantee or warranty. Our "General Terms and Laid Down Conditions" apply. Jurisdiction for both parties, up to a dispute value of €50,000.00, is the District Court of Ludwigslust; for higher dispute values, the Regional Court of Schwerin. Subject to prior sale, errors, and typing mistakes. --

Condition: good (used), Year of construction: 1978, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, cutting width (max.): 800 mm, saw blade bore: 30 mm, actuation type: manual, total length: 2,800 mm, Equipment: saw blade guard, Panel Saw / Table Saw / Circular Saw / Joiner's Saw Manufacturer: Altendorf Model: F45 Year of manufacture: 1978 Sliding table length: 280 cm Ripping width/Parallel fence approx.: 80 cm Parallelogram safety guard with top-mounted extraction hood Extension table with crosscut fence Miter fence Motor power: 5.5 kW Condition: see pictures and please pay attention to the item description. Parts can also be picked up by the buyer. All dimensions are approximate. All information provided to the best of our knowledge, but without guarantee. Subject to prior sale. Lodpfjy Aht Dex Ancoaa Articles can be picked up by the buyer or shipping can be arranged at the buyer's expense. The stated shipping costs are a guideline price; they may vary depending on distance and unloading possibilities. Please inquire. The offered item is subject to differential taxation. The indicated sales price is the gross final amount. An invoice with VAT shown separately will not be issued. You will receive an invoice according to §25 UStG. Warranty basis: Due to wear and tear on used parts, the items are fundamentally sold as defective – for spare parts only and only to commercial buyers. By placing a bid, the buyer accepts this as the basis of the sales contract. If the offered item is a used article, warranty is 12 months when the buyer is a consumer in terms of §13 BGB. If the buyer is a business customer in terms of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months for consumers according to §13 BGB. For business customers (§14 BGB), the warranty is 12 months. Notice regarding the online dispute resolution (ODR) platform.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,507 kg, axle configuration: 3 axles, first registration: 05/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Double deck with 22 beams Loading capacity 33 euro paletts Ledpfx Ansyy Sh Hecsaa Length/width/heigth - 1340cm / 249cm / 265 cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1977, Tower crane 32/K/45 Crane with max jib of 30 m Lifting capacity from 1,000 to 4,700 kg Lajdpfoyy Rmnjx Ancea Counterweight (concrete) 16,000 kg The slewing motor, hydraulic pump, cylinder seals, hoses, ropes, and contactors have been replaced on the crane. Spare parts list and operating manual available. With remote control.

Condition: used, total height: 2,500 mm, total length: 3,500 mm, total width: 2,500 mm, Empty weight: 10.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 11.5 Ljdpfx Aneyx Tvieceaa - Centre height [mm]: 700 - Swing over bed [mm]: 1400 - Carriage turning diameter [mm]: 640 - Distance between centres [mm]: 800 - Bed width [mm]: 700 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 240 - Max. spindle speed [rpm]: 110 - Options: Digital readout, Facing lathe, Quick-change tool post - Transport dimensions: 3500mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2005, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 4,120 mm, travel distance Y-axis: 2,310 mm, For sale: Intermac Master 45 glass/stone processing machine, the largest unit ever produced. The machine was manufactured in 2005, with approximately 8,000 operating hours (including only about 100 hours dedicated to stone processing). The company is offering this machine for sale due to relocation and modernization of its machinery fleet. Condition: The machine is in very good condition—protected against corrosion and has undergone a comprehensive overhaul. Most hoses and lines have been replaced, all leaks sealed, filters changed, coolant and lubricants replaced, axis brakes changed, door wheel bearings and control unit fuse replaced, as well as air hoses and both suction and return hoses for the vacuum pump. Technical water pump hoses, clean water hoses, and filters have also been replaced. The radiator has been professionally cleaned, the lubrication system has been cleaned, and the coolant and lubricant tanks refilled. Operational status: The machine is fully functional and ready for immediate use. Professional geodetic measurements (laser scanning, photogrammetry) were conducted to verify machine geometry. Technical specifications: 1. Working area: 4.12 × 2.31 meters 2. Software: ICam 3. Suction cup set: 160 mm round (2 pcs), 120 mm (2 pcs), 90 mm (2 pcs) Laedpfx Anjymgfljcja 4. 3 reference starting points 5. Stone-processing tools included: 5 ISO40 tool holders, 45 mm cutting mill, 20 mm diameter bit, “0” surfacing mill, set of 5 polishing pads, 35 mm hole saw, 120° lettering engraver—all tools are very lightly used. The machine is currently assembled and operational. It is a well-maintained, rust-free unit in full working order (interested buyers can request videos of the machine in operation). Throughout its lifespan, the machine has been stored in a dry, heated industrial facility. Buyer is responsible for disassembly and transportation. Disassembly services can be arranged upon prior agreement if needed. A VAT invoice will be issued. The listed price is NET. Possible disassembly date: From 10/02/2026 onward. Additionally, a Renner 15 kW compressor with a 500-liter pressure buffer tank can be purchased. Preferred contact method: email.

Condition: excellent (used), Year of construction: 2017, 1 used, very good hydraulic 5-station combined high-performance profile steel shear Technical Data: Punching Station Punching force: 45 t Cutting capacity (steel 400 N/mm²): Ø 22 x 15 mm, Ø 38 x 8 mm Throat depth: 175 mm Max. stroke length: 50 mm Strokes per minute: 20 Working height: 955 mm Notching Station Max. material thickness: 8 mm Max. notch width: 35 mm Max. notch depth: 75 mm V-notch tools: 100 x 100 x 8 mm Flat Bar Shear Material width x thickness max.: 200 x 15 mm / 300 x 12 mm Blade length: 316 mm Miter cut 45° leg length x thickness: 80 x 10 mm Working height: 955 mm Bar Steel Shear Capacity round material: 30 mm Square material: 25 mm Lsdpfx Asxz Dn Eonceaa Angle Steel Shear Cutting capacity 90° L-profile: 100 x 100 x 10 mm Cutting capacity 45° L-profile: 70 x 6 mm Cutting capacity U-I profile (accessory): 80 x 45 mm Cutting capacity T-profile (accessory): 40 x 5 mm Working height: 1140 mm Drive motor output: 4 kW Machine dimensions (approx.): 1500 x 950 x 1680 mm Machine weight (approx.): 1400 kg Accessories / Special Features: • Punching station, flat bar shear, angle steel shear, profile steel shear, notching station • Infinitely variable stroke adjustment • Heavy and robust welded construction • Powerful 400 Volt motor • Jog mode • Triangular notching station / V-notch tool • Equipped with MUBEA holder for punches No. 1, No. 2 and No. 3 as well as dies No. 30, No. 45 and No. 60; optional use of punch and die No. 4 and No. 80 possible • Punch holder with bayonet lock • Advantages of punching compared to drilling: - Significant time savings – fast cycle times - No chips - No coolant required • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, axle configuration: 3 axles, first registration: 06/2019, Equipment: ABS, 15 units available, galvanized SAF axles 2 lift axles 1x20 rear flush 2x20 1x30 rear flush 1x40 rear flush 1x45 rear flush ADR Water tank Toolbox LED lights Laodpovvfwbsfx Ancsa All offers are subject to change, non-binding, and without warranty. Errors, changes, and prior sale excepted.

Condition: used, empty load weight: 7,300 kg, maximum load weight: 37,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 03/2019, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Reinforced design, length of high bed approx. 4,180 mm, length of low bed approx. 9,400 mm, loading height approx. 900 mm, 12 x stake pockets in the outer frame, 3 x cross stake strips, 14 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO containers or 1 x 40 ft ISO container, , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Laedpfx Ansyyzgfecea

Condition: used, empty load weight: 7,800 kg, maximum load weight: 37,200 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 04/2023, next inspection (TÜV): 05/2026, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Hot-dip galvanized, reinforced design, air suspension with lift axle, axle load gauge for axle load, upper deck length approx. 4,180 mm, lower deck length approx. 9,400 mm, loading height approx. 900 mm, front wall approx. 1,600 mm high, 14 stake pockets in the outer frame, 3 crosswise stake supports, 24 lashing rings, 4 pairs of container locks for 2 x 20 ft. ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €1,000. Ledoyyzglspfx Anceaa -- Subject to typographical errors, mistakes, and changes. Sample images -- More data at: !, More details: !

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, FIRE-galvanized, reinforced design, air-sprung with lift axle, axle load gauge for axle load, length high bed approx. 4,180 mm, length low bed approx. 9,400 mm, loading height approx. 900 mm, front wall approx. 1,600 mm high, 14 x stanchion pockets in outer frame, 3 x cross stanchion rails, 24 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO container or 1 x 40 ft ISO container, , Surcharge for, aluminum ramps = price: 1.900 ¤, , , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Ljdpfx Aeyyzgxsnceaa

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Lajdpfx Aoyf Nu Tsncoa

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW Lajdpfoyyxikjx Ancja

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice Ledpfsd Iipmsx Ancjaa • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Ljdjfv Av Sjpfx Ancoaa Additional benefit: Faster cycle time and air savings

Condition: excellent (used), Year of construction: 1996, Milling machine, table milling machine, milling unit Manufacturer: Lazzari Model: Base 45 Year of manufacture: 1996 Lajdpsyz U Hzjfx Ancoa Tiltable Motor: 4 kW Speed: 3,000 - 10,000 rpm Left/right rotation

Condition: excellent (used), Year of construction: 1995, Tilting spindle moulder with long work tables and feed unit Motor power: 5.5 kW, 400 V, 50 Hz Spindle speeds: 3,500/4,500/6,000/8,000/10,000 rpm with digital readout Useful spindle height: 180 mm Vertical spindle stroke: 155 mm Interchangeable spindle MK 5, diameter 30 mm Spindle tilting range: +45° / -10° Spindle height adjustment: electric with digital readout Spindle tilt adjustment: electric with digital readout Fence adjustment: manual with fine adjustment Spindle reversal (right/left rotation) CE compliant Extraction connection: 2 x 120 mm Lajdpfxjyynptj Ancja Working height: 860 mm Including round arch milling fence Including interchangeable spindle MK 5, diameter 25 mm Including interchangeable spindle MK 5, diameter 50 mm Dimensions (L x W x H) approx.: 2650 x 1250 x 1700 mm Weight approx.: 1000 kg HOLZHER feed unit 3 rollers 8 speeds Note for used machines: • Errors in technical details and prior sale reserved. • Stated prices are ex location—loaded free onto transport! • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (Please respond to enquiries only with your address and telephone number!)

Condition: good (used), Year of construction: 2003, 048 USED MHS bread slicer. We have 10 of these slicers. TECHNICAL DATA: - slice thickness 11 mm, - power supply 400 V. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices Ljdpev A Umrofx Ancsaa

Condition: used, Year of construction: 2002, 4.500 kg Lajdpfx Aew Nn A Dencea Year 2002 Number of working hours ca. 9.000 h Still type R 60-45 electric forklift truck for in-house transportation and lifting heavy loads in industry, warehouses and production.

Condition: used, Year of construction: 2001, Overview  This shrink packaging machine (film only) was manufactured in 2001 by Italy SMI. The SMI LSK 45 is designed for film-only shrink wrapping of bottles in beverage production lines. The machine operates with 4 infeed lanes and supports multiple pack configurations and bottle formats. It was fully operational prior to dismantling in January 2026 and is currently dismantled. The machine is supplied with technical documentation. Technical data  Capacity: approx. 45 packs/min Formats: 3×2 / 3×3 / 4×3 Bottle formats: 500 ml / 1,000 ml / 1.5 L / 2.0 L Application: Shrink packaging (film only) Configuration: 4-lane infeed system, shrink film wrapping unit, shrink tunnel Scope of Delivery Shrink packaging machine | SMI | LSK 45 | 2001 | Film-only shrink wrapper with 4-lane infeed Shrink tunnel | SMI | 2001 | Integrated shrink tunnel Conveyor system |  With lane separation Control system | Control panel with Gefran temperature controller Lodpfoyycgtex Anceaa

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 4, drilling depth: 240 mm, total width: 480 mm, total length: 550 mm, drilling capacity: 45 mm, spindle speed (max.): 1,270 rpm, spindle speed (min.): 68 rpm, spindle stroke: 240 mm, SPECIFICATIONS Brand: Erlo Model: TCA-45 Capacity: 45 mm ø Table length: 550 mm Table width: 480 mm Spindle taper: MK4 Speed: 68 - 1,270 RPM Arm reach: 360 mm Stroke: 240 mm Table height adjustable manually Automatic feed Gear-driven Lasdpfx Ajx Dcfhsncsa Machine dimensions: 1,000 x 700 x 2,400 mm

Condition: used, machine/vehicle number: XL9T0N30064415028, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2006, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,110 mm, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: ROR Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 30% Laedpoyzxrujfx Ancja Weights Empty weight: 6.380 kg Carrying capacity: 38.620 kg GVW: 45.000 kg Identification Registration number: OJ-24-LK

Condition: used, power: 109 kW (148.20 HP), gearing type: other, fuel type: diesel, operation weight: 12,300 kg, tire size: 404/70 -24, axle configuration: 4x4, first registration: 10/2006, suspension: steel, total length: 6,135 mm, total width: 25,500 mm, total height: 24,500 mm, front tire size: 404/70 -24, driver cabin: day cab, wheelbase: 3,200 mm, Equipment: air conditioning,

Condition: used, Year of construction: 2008, Format: 300 x 450 mm Equipment: max. screen frame size 500 x 750 mm table height 945 + 30 mm screen lift height 300 mm max. printing speed 100 - 500 mm/sec. max. cycling speed 800 p/h mains supply 220, 50/60 V / Hz working pressure 5 - 7 bar Ledoyzrupspfx Ancjaa dimensions (LxWxH) 920 x 750 x 1710 mm weight approx. 245 kg

Condition: excellent (used), Tool holder steep taper 45 (SK45) to MK2 (for milling arbors, shank milling cutters, for milling machines). Lodpfx Anjymx Edecsaa Manufacturer: Bahmüller, Type W640/1 – Wilhelm Bahmüller Maschinenbau Präzisionswerkzeuge GmbH Very good condition Without drawbolt (thread M16), with integrated ejector screw for clamped tool. Milling tool holder – tool taper for clamping Price €55,-- net ex location plus packaging costs All technical data subject to errors and omissions. We sell exclusively to countries within the European Community.