Used Double Column Press 20 T for sale (93,495)

Condition: ready for operation (used), We offer this ready for use B.I.P. Engineering BIPEL 150 T Rubber Vulcanising Press. Guodpfxoz D Igbe Angsh It is currently installed so can be seen running in situation. We have attached a data sheet which shows the key Dimensions. Type: 150 FAOL Serial Number: 8620 Voltage: 440 V Phase: 3 Frequency: 50 Hz Apparent power: 100 kVA Price in GBP = £16,000 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Gjdpsz Dtcbjfx Angouh Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Manufacturer: Motan Type: 40-20/BL-T MT Guodouk Aiyepfx Angeh Power: 3 kW Inlet width: 40 x 20 cm Technical condition: very good PRICE REDUCED FROM 2550 TO 2250 EUR!!!

Condition: used, Year of construction: 1989, pressure 25 t throat 190 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm table surface area 550 x 370 mm hole in the table 200 x 155 mm table height over floor 660 mm ram surface 280 x 160 mm total power requirement 1,5 kW Guedpjz Rqnpsfx Angoh weight of the machine ca. 1,9 t - Ortlinghaus hydraulically operated clutch with dual brake - fixed table Machine is partially overhauled in-house

Condition: good (used), pressing force: 200 t, ram plate length: 3,100 mm, HAMMERLE 200-ton 3m CNC Press Brake Guedpfx Ajz Iuaisngeh Press Brake, Edge Bending Machine Brand: HAMMERLE Pressing force: 200 tons Bending length: 3100 mm CNC control: CYBELEC DNC 90 Control axes: Y1, Y2, X, R, Z1, Z2, V, which means: Y1, Y2: left and right frame X: back gauge, front/rear R: upper/lower back gauge Z1, Z2: left/right finger V: table compensation Pneumatic supports for sheet metal to the back gauge Numerical and graphical 2D element drawing 1 set of tools included with the machine, plus all items visible in the photo in the toolbox Machine documentation: diagrams and operating instructions

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm ram surface 320 mm Guedpfolp Uz Ujx Angeh table surface area 470x400 mm weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,100 kg, input voltage: 400 V, total length: 1,460 mm, total width: 950 mm, total height: 2,380 mm, Special Offer – 5% Discount Available! 25T Open Back Eccentric Press The 25T Open Back Eccentric Press is a professional industrial machine designed for punching, stamping, bending and forming metal components. Its rigid open back frame provides excellent accessibility to the working area while ensuring high stability, precision and operator comfort. The machine features a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems for reliable, efficient and safe operation. Its robust construction makes it suitable for continuous industrial production. Main Features • Open back frame design • Heavy-duty steel construction • Fixed working table • Transversely mounted crankshaft • Dry pneumatic friction clutch • Adjustable slide stroke • Slide balancing device • Integrated safety valves • Manual controls • High productivity • CE certified Technical Specifications • Press force: 25 t • Stroke under nominal load: 3 mm • Slide stroke: 10–110 mm • Strokes: 80–120 strokes/min • Maximum die height: 250 mm • Die height adjustment: 50 mm • Throat depth: 210 mm • Distance between frame columns: 450 mm • Working table: 700 × 400 mm • Table thickness: 80 mm • Outer table hole diameter: Ø170 mm • Table hole depth: 20 mm • Inner table hole diameter: Ø150 mm • Slide surface: 360 × 300 mm • Punch hole diameter: Ø40 mm • Punch hole depth: 60 mm • Motor power: 3 kW • Machine dimensions: 1460 × 950 × 2380 mm • Machine weight: 3100 kg Standard Equipment • Light curtains • Mechanical safety guards • Lower table ejector • CE Declaration of Conformity • Technical documentation Applications Gedpfxsytcvgo Angouh • Punching • Stamping • Bending • Forming • Sheet metal production • Metal fabrication workshops • Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: used, pressure 160 t dayligth 600 mm stroke 25 - 150 mm table surface area 1500 x 900 mm ram surface 1500 x 900 mm ram adjustment 100 mm daylight between the columns 1500 mm Gjdpscgqvpsfx Angeuh daylight between the side columns 400 x 200 mm distance between columns 1680 mm weight of the machine ca. 15 t dimensions of the machine ca. 2,7 x 1,8 x 4,4 m

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Gedpfx Aeu Nfizsngsuh Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1974, pressure 075 t throat 380 mm stroke 16- 140 mm number of strokes - idle run 105 /min shut height (stroke down, adjustm. up) 260 mm Guodoz N Hu Njpfx Angeh ram adjustment 80 mm table surface area 750 x 640 mm ram surface 500 x 200 mm hole in the table 150 mm table height over floor 800 - 920 mm total power requirement 7 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Machine has an adjustable table and air operated clutch and brake.

Condition: used, Year of construction: 1970, functionality: fully functional, pressing force: 100 t, overall weight: 4,000 kg, pressure 40 t stroke 150 mm serial number 100091 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t safety light frame ja bei beiden Gujdpfx Asvxltbsngjh

Condition: used, Technical details: pressure: 63 t distance between columns: 900 mm no. of strokes: ca. 75 Hub/min ram adjustment: 80 mm stroke adjustable from - to: 3-100 mm Table dimensions: 900 x 600 mm throat: 310 mm dayligth: max. 350 mm drive power: 11 kW voltage: 380/220/24 V frequency: 50 Hz operating pressure: ca. 150 bar oil volume: 500 l safety distance: 150 mm passage opening in table: 200 mm total power requirement: 11 kW weight of the machine ca.: 4,0 t space requirements of the machine approx.: L:1,8 x B:1,8 x H:3,7 m DIFFERENTIAL PATH PRESS HIGH SPEED PRESS - High-speed press, C-stand - Compressed air connection: approx. 5 bar Gujdpfx Aou Nfnkongoh Condition. Press is not under power, without switch cabinet, sale as is. - Documentation available i.D. *

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm Gjdpsyfwxtsfx Angsuh working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec Gusdpfxsyfwywo Angsh speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW. SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 200mm 2. Capacity: 12.000 kg/hour ( Steel) Gjdsgv I N Uspfx Angeuh 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 850 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 10 - 12 sec 7. Electric Motor Power: 6x37=222 kW (Main Motors) 8. Machine Dimensions : 11.000mm x 10.000mm 9. Machine Weight: 60.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Year of construction: 1980, condition: used, pressure 100 t Gusdpfx Anjdlxctogjh distance between columns - mm stroke 350 mm table size 1150 x 700 mm total power requirement 11 kW weight of the machine ca. t dimensions of the machine ca. m - cutting impact dampening - die cushion - without electrical cabinet

Year of construction: 1981, condition: used, pressure 40 t distance between columns 600 mm stroke 160 mm table-size 560 x 400 mm dayligth 360 mm ram hole 40 H 7 DIN 810 mm oil volume 500 l return speed 200 mm/sec die cushion hydr. pressure/stroke 60 capacity of ejector 25 t total power requirement 15 kW dimensions of the machine ca. 1.44 x 0.95 x 2.54 m pressing speed 27 mm/sec Gusdpfsb U Hw Tox Angjh return speed 200 mm/min

Condition: used, Year of construction: 1987, faceplate diameter 3600 mm swing diameter 4500 mm turning height 1850 mm turning speed range 0,6- 50 U/min weight of the machine ca. 72 t verticale turning machine double coloumn - digital scale - double coloumn - 2x ram - movable cross slide Guedpfx Aeyz Db Uongoh - extra toolholder (four station) on the side of facing plate

Condition: used, pressure 2 t throat 150 mm stroke 150 mm table surface area 310 x 250 mm Gujdpfx Ajtzv Hmengjh power requirement 2,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 1,7 m Single column press - with table base - various press accessories

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min table surface area: 900x640 mm throat: 355 mm ram adjustment: 150 mm mortise hole in ram: Ø 36 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330mm mm total power requirement: 11 kW weight of the machine ca.: 7,5 t transport dimensions LxWxH: 1,9x1,6x3,1 m Gsdpfxeu Nfi Ue Angeuh Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V Gsdeu Nfmyopfx Angsuh control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, Year of construction: 1998, Condition: Defective / Sold as a spare parts stock! control panel missing - Producer Sorbini - Type T/20MF - Year of construction 1997 - Working width 1.300 mm - Working height ~ 880 - 920 mm - Part height ~ 5 - 80 mm - Operating side, left - roller diameter ~ 248 mm - Metering roller ~ 174 mm - Reverse drive - Double diaphragm pump 1 Stk. - Length 950 mm Godpezf N Hhsfx Angjuh - Width 2.550 mm - Height 1.540 mm - Weight ~ 1.220 kg - Without switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Voltage fluctuation max. +/- 5 %

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec Guedpfju Nfuqox Angsh ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Gujdedzqddjpfx Angeh Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 40 t, oil tank capacity: 90 l, total length: 1,630 mm, total width: 1,020 mm, total height: 1,950 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, OFFER OF THE WEEK! MTP HYDRAULIC CNC PRESS BRAKE 1320 MM / 40 T 2-AXIS X + Y – TOUCHSCREEN CONTROL Godpfxeyr N E Es Angouh Metal Technics Polska is a manufacturer and importer of professional CNC machines, laser systems and metalworking equipment. For 15 years, we have supplied reliable technologies to companies across Europe. The MTP 1320/40 hydraulic CNC press brake is a compact and efficient machine designed for accurate and repeatable sheet-metal bending. With a pressing force of 40 tonnes and a working length of 1320 mm, it is ideal for workshops and production companies looking for a practical and easy-to-operate bending solution. MTP-3212 TOUCHSCREEN CONTROL The machine is equipped with the MTP-3212 touchscreen controller and 2 controlled axes: • Y axis – ram movement / bending depth • X axis – rear back-gauge positioning Controller functions include: • Touchscreen interface • Programming of bending operations • Storage of bending programs • Manual programming • Tool parameter management • SD card memory • X-axis back-gauge positioning • Y-axis bending-depth control AMADA-PROMECAM STYLE TOOL CLAMPING The machine is equipped with an AMADA-Promecam-style manual upper tool-clamping system, allowing convenient replacement and positioning of the segmented upper tooling. SAFETY EQUIPMENT • Side safety guards • Front safety light curtains • Secured rear working area • Emergency stop system • Automatic stop when the protected safety zone is breached TECHNICAL DATA • Nominal force: 400 kN / 40 t • Working length: 1320 mm • Controlled axes: X + Y (2 axes) • Distance between columns: 900 mm • Throat depth: 180 mm • Ram stroke: 100 mm • Maximum daylight: 290 mm • Back-gauge range: 500 mm • Approach speed: 80 mm/s • Working speed: 9 mm/s • Return speed: 80 mm/s • Main motor power: 3 kW • Dimensions: 1630 × 1020 × 1950 mm (L × W × H) • Weight: 1500 kg • Controller: MTP-3212 touchscreen • Tool clamping: AMADA-Promecam style • Crowning / compensation system: Not equipped The MTP 1320/40 combines compact dimensions, simple touchscreen operation and reliable hydraulic technology. The X + Y axis configuration provides automatic back-gauge positioning and control of the bending depth, making the machine suitable for individual jobs as well as repeat production. DELIVERY Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to destination. Please provide your delivery address or postal code to receive a transport quotation.