Used Doosan Dx350Lc-7 for sale (26,231)

Condition: ready for operation (used), functionality: fully functional, Pin diameters: 8 cm – 9 cm Center distance: 38.5 cm and 40 cm All measurements are shown in the photos Blade length: 145 cm Cgedpfxjyzabwj Ak Eet All dimensions can be setted according to your machine by bohrwerk machining Very competitively priced

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: Csdsxq R Evopfx Ak Ejgt - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Heidenhain, controller model: TNC530, table width: 1,200 mm, table length: 540 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,500 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, With chip conveyor and tool holders cone. Cgsdpfx Aox Ttd Nok Eot

Condition: excellent (used), Year of construction: 2019, operating hours: 14,553 h, functionality: fully functional, machine/vehicle number: ML0405-000122, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, bar passage: 51 mm, bar diameter (max.): 51 mm, Equipment: documentation/manual, In addition to the lathe, a TOP AUTOMAZIONI FU350SX bar feeder, year 2020, is also for sale. The price is for the complete set. Cgsdpfjyym Smsx Ak Ejt

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, overall weight: 3,100 kg, number of axes: 2, Horizontal turning machine manufactured in 2021. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 6,000 rpm and a chuck size of 6” (160 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details. • Chuck size: 6" (160 mm) • Bar capacity through spindle: Ø52 mm • Max turning diameter: Ø350 mm • Max turning length: 330 mm • Rapid traverse (X/Z): 36 m/min • Tool size: 25 x 25 mm (OD), Ø32 mm (ID) • Turret: 12 stations, tool change time 0.15 s • Tailstock: Programmable with rotating tip • Options/features: Doosan tool load monitoring system; Automatic tool setting; High‑pressure coolant 7 bar (1.1 kW); Oil separator; Electrical noise suppression; Bar feeder preparation • Certification/Power: CE certification; Transformer • Operating hours: 2,898 h Additional equipment • Basic tool holder set • Oil mist extractor • Chip conveyor • Workpiece collecting box (parts collection) Cedpfx Asyvqinok Ejgt Technical Specification Counter Spindle No Driven Tools No

Condition: like new (used), functionality: fully functional, fuel type: diesel, overall weight: 21,000 kg, empty load weight: 21,000 kg, operation weight: 21,000 kg, Year of construction: 2022, operating hours: 60 h, Used Doosan DX210W Adjustable boom Central lubrication Air conditioning Camera 3rd hydraulic circuit Tyres Woody 60 harvester head The machine was temporarily used for sorting round timber. Condition like new. Sale on behalf of customer. Codpeyyk Hhjfx Ak Esgt

Condition: excellent (used), Year of construction: 2016, operating hours: 11,000 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, controller manufacturer: Heidenhain, We offer this very good Doosan DNM 6500 vertical machining center, year of manufacture 2016. Cjdjyyiyyopfx Ak Esgt Manufacturer: Doosan Model: DNM 6500 II Type: vertical machining center Year of manufacture: 2016 Serial number: If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, TECHNICAL DETAILS Max. turning diameter: 300 mm Cgsdpfx Ajyvfvuek Eet Max. turning length: 300 mm Spindle bore: 52 mm Main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Machine weight: 2,200 kg EQUIPMENT Horizontal CNC lathe High-performance main spindle Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint User-friendly CNC control High reliability and low maintenance Control: FANUC CNC

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Cgjdpfsyx U Nwjx Ak Ejt

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Cgodeufi Rxspfx Ak Est Stator blades: 2 plus blade set: 2 Blade setting table

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,200 h, load capacity: 9,000 kg, lifting height: 3,100 mm, fuel type: diesel, Equipment: cabin, Diesel forklift Machine make: DOOSAN Designation: D90S-5 Manufacture year: 2012 Meter readings (mtg): 8235 Unladen weight (kg): 12197 Lifting capacity (kg): 9000 Cgjdpfx Aovfp Rdek Eet Lifting height (mm): 3100 Side shift forks Mast type: STD Fuel type: diesel After a major maintenance overhaul for more than €7,000 - new tires - new forks - regeneration of cylinders, - gearbox: discs + sealants - brakes: discs and bearings - all oils, fluids and filters Technical condition: used, very good

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 290 mm, turning length: 305 mm, turning diameter: 320 mm, spindle bore: 51 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, spindle motor power: 1,500 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,650 mm, total length: 2,500 mm, total width: 1,600 mm, feed length Z-axis: 330 mm, swing diameter over cross slide: 290 mm, turning diameter over bed slide: 510 mm, overall weight: 3,000 kg, bar passage: 51 mm, chuck outer diameter: 210 mm, spindle nose: A2-6, bar diameter (max.): 51 mm, CNC Lathe – Doosan Lynx 220B | Ready for Production | Immediate Availability For sale: Doosan Lynx 220B CNC turning center in good working condition, available immediately. This is a compact and highly reliable CNC lathe, ideal for precision turning, small to medium batch production, and general machining applications. Known for its stability and efficiency, the Lynx 220B is a solid choice for workshops looking for a dependable production machine. Key Specifications: Cgjdsyxtiijpfx Ak Ejt * Turning diameter: 320 mm * Turning length: 305 mm * Swing over bed: 510 mm * Swing over cross slide: 290 mm * Spindle bore: 51 mm * Spindle speed: up to 6000 rpm * Spindle motor power: 15 kW * X-axis travel: 175 mm * Z-axis travel: 330 mm * Turret: 12 stations * Chuck size: 210 mm (8") * Spindle nose: A2-6 Machine Condition & Details: * Machine is operational and ready for production * Well-suited for daily workshop use * Inspection under power possible * Immediate delivery available * Location: Netherlands Reason for sale: Change of business focus Price: €23,500 (negotiable) Serious inquiries only. For more information, additional pictures, or to arrange a viewing:

Condition: used, Year of construction: 2023, operating hours: 482 h, lifting height: 4,900 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Bobcat D30NXS diesel forklift, year of manufacture: 12/2023, operating hours: only 482h!, rated load capacity: 3,000 kg, fork length: 1,200 mm, lift height: 4,900 mm, triplex mast, hydraulic side shift, engine: [45.6 kW/62 hp], weight: 4,901 kg, very good condition, fully operational and ready for immediate use! We are happy to provide a leasing or financing offer upon request. Mr. Mihm (Tel. ) will be glad to assist you. For more information, please visit our website. Subject to prior sale and errors excepted. Power steering, protective roof = Further information = Cgsdpfjyxkucex Ak Eet Lifting capacity: 3,000 kg Closed height: 230 cm For more information, please contact Tobias Ebert.

Condition: ready for operation (used), double hidraulic dy to injectors new turbo Cjdpfxeyxbk Ij Ak Eogt

Condition: used, functionality: fully functional, turning length: 750 mm, turning diameter: 350 mm, spindle motor power: 4,000 W, spindle speed (max.): 4,500 rpm, spindle bore: 65 mm, rotational speed (max.): 4,500 rpm, type of input current: three-phase, bar passage: 65 mm, bar diameter (max.): 65 mm, spindle nose: A2-6, swing diameter over bed slide: 550 mm, overall weight: 3,800 kg, DOOSAN S310SML CNC Lathe with IEMCA MASTER 880MP Bar Feeder Robust and high-performance CNC turning and milling center from Doosan, ideal for precision series production in mechanical engineering. The machine is equipped with a Fanuc Series 18T control system and offers reliable performance as well as high productivity. The DOOSAN S310SML provides a maximum turning length of 750 mm and a maximum turning diameter of 350 mm. The spindle reaches speeds of up to 4,500 rpm with a spindle bore of 65 mm, enabling efficient processing of bar stock. Featuring an A2-6 spindle nose and a swing diameter over bed of 550 mm, the machine offers stable and precise machining characteristics. The powerful spindle motor ensures consistent performance during continuous operation. Additionally, the machine is equipped with an IEMCA MASTER 880MP bar feeder, guaranteeing automated material loading and making the setup ideal for serial production. Technical Highlights: - Control: Fanuc Series 18T Cedjyw Rikepfx Ak Ejgt - Turning length: 750 mm - Turning diameter: 350 mm - Max. spindle speed: 4,500 rpm - Spindle bore / bar capacity: 65 mm - Spindle nose: A2-6 - Swing over bed: 550 mm - Total weight: approx. 3,800 kg The machine is in good used condition and is ready for immediate operation.

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours Cgsdpfx Ajyfxv Tok Eot 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 Codpfx Ajyr R A Esk Eegt • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 3480 kg Measurements height 1693 mm Main Drive Spindle Speed 6000 RPM Spindle motor power 15 kW Number of axis 2 Control Unit Brand SIEMENS Csdpox D Dp Isfx Ak Eogt Model SINUMERIK 828D Technical Specification Driven Tools yes Dimensions Machine Length 2540 mm Movement X-Axis Movement 205 mm Z-Axis Movement 560 mm This DOOSAN LYNX 2100LMA was manufactured in 2019. It features a 6-inch chuck, a maximum turning diameter of 300 mm, and a length of 510 mm. The machine offers rapid traverses of 30 m/min in the X-axis and 36 m/min in the Z-axis, with a spindle speed up to 6000 rpm. Ideal for precision turning, it also includes a 12-station turret. Contact us for more information about this machine. Application Types Turning

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 3850 kg Measurements height 1921 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Cjdpfxex D Dkre Ak Eogt Dimensions Machine Length 2880 mm Main Drive Number of axis 3 Spindle Speed 6000 RPM Spindle motor power 15 kW Movement X-Axis Movement 205 mm Z-Axis Movement 560 mm Y-Axis Movement 105 mm Technical Specification Driven Tools yes This 3-axis DOOSAN LYNX 2100LYA was manufactured in 2020, featuring a chuck size of 6 inches, a maximum turning diameter of 300 mm, and a length of 510 mm. It boasts rapid traverses of 30 m/min on the X-axis and 36 m/min on the Z-axis, with a high spindle speed up to 6000 rpm. Consider the opportunity to buy this DOOSAN LYNX 2100LYA horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Cgedpfx Asx D Igdek Eet Movement X-Axis Movement 1020 mm Y-Axis Movement 540 mm Z-Axis Movement 510 mm Additional Equipment Through-spindle cooling Preparation for 4th axis External cooling unit This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, spindle motor power: 22,000 W, spindle speed (max.): 3,600 rpm, travel distance X-axis: 250 mm, travel distance Y-axis: 50 mm, controller manufacturer: FANUC, number of axes: 6, This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information. • Max turning diameter: 330 mm (12.99 in); upper turret: 390 mm • Max turning length: 500 mm (19.6 in) Codpfxjx Rd Hvj Ak Esgt • Bar capacity (main spindle): 76 mm (2.99 in) • Travels: X 250 mm (9.84 in), Y ±50 mm (±1.97 in), Z 580 mm (22.8 in) • Sub spindle speed: 6000 rpm • Sub spindle motor power: 7.5 / 11 kW • Notes: Series introduced mid-2000s

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,346 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, number of axes: 3, This 3-axis DOOSAN NX 6500 II was manufactured in 2019. It features a Heidenhain TNC 640 control, a table size of 1200 mm by 650 mm, and travels of 1050 mm in X, 650 mm in Y, and 650 mm in Z. The spindle reaches up to 20,000 rpm, and the tool magazine holds 30 positions. If you are looking to get high-quality milling capabilities consider the DOOSAN NX 6500 II machine we have for sale. Contact us for more information. • Table Length: 1200 mm • Table Width: 650 mm Csdpfx Akox Uq Hde Esgt • Maximum Spindle Speed: 20000 rpm • Spindle: EPM spindle made in Germany • Spindle Taper: ISO 40 dual contact • Tool Magazine Capacity: 30 positions • X, Y, Z Axis Scales • Linear Guideways (LM guide) • MPG Handwheel • Operation and Maintenance Manuals Included

Condition: ready for operation (used), Year of construction: 2011, number of axes: 2, This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine. Additional equipment Csdpfjx D Drvjx Ak Eogt • Motorized bar passage with counter-spindle • Complete with accessories and LNS bar loader Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, tool weight: 30,000 g, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. Additional equipment • Belt-type oil skimmer • Triple light tower • Shower coolant • Through-spindle coolant 70 bar – 75 kW with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Machine Benefits Technical Machine Benefits • Equipped with fanuc 31i cnc control • B-axis: indexable by degree • Pallet size: 800 x 800 mm • Pallet centering device • Tool magazine: 60 tools type bt 50 • Max. Torque: 1732 n·m Extra Information Machine still under power Dimensions Cgodpfx Akoyair Uo Ejt Machine Depth 8150 mm

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, total height: 2,700 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, product length (max.): 3,985 mm, number of axes: 4, This 4s DOOSAN DNM 500II was manufactured in 2016, featuring a table size of 1200 × 540 mm and a maximum table load of 800 kg. With an X-axis travel of 1020 mm and a spindle speed of 12,000 rpm, this vertical machining center offers efficient machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500II vertical machining center. Contact us for further details. • Operating hours: 4,500 • Table size: 1200 × 540 mm • Rapid traverse: X/Y 36 m/min, Z 30 m/min • Tool changer: random arm, 30 stations • Coolant: through‑spindle coolant 20 bar, flood coolant • Preparation: 4th‑axis preparation • Control: FANUC Oi‑M Easy Guide; look‑ahead 200 blocks; electronic handwheel; USB port • Other: automatic door opening/closing; 3‑color status lamp; documentation and CD‑ROM • Condition: Good; perfect working condition • Availability: Immediately available Additional equipment • 4th axis: NIKKEN CNC202FA • Chip conveyor • Belt‑type oil skimmer Cgodpfx Aeyg Iltsk Ejt • Air/coolant guns Technical Specification Taper Size BT 40