Used Delasco Used Peristaltic Pump for sale (51,276)

Condition: excellent (used), Manufacturer: Grundfos Type: NB80-250/220 A-F-A-BAQE Speed for pump data: 2940 rpm Tjdpfx Amjncd A Njrsc Rated flow: 73.1 m³/h Rated head: 57.6 m Actual impeller diameter: 222 mm Impeller nom: 250 mm Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 65 Pump outlet: DN 50 Pressure rating: PN 16 Net weight: 191 kg Gross weight: 216 kg

Condition: used, functionality: fully functional, Orion KHA750A dry-run, oil-free vacuum pump Oil-free (dry scroll, i.e. dry scroll) pumps have a low final vacuum and enable high pumping speeds. Tsdpfx Aoufh Upomrsc Pumping capacity 145 l/min Pipe connection: RC 1/4 -- diam. 70mm Operating pressure: 8 - 48 kPa Air temperature: 0-40 °C, humidity: normal level (65 ± 20%). Several pieces in stock

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: Tedpfx Aozz Tm Romrjc The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Panel saw HOLZ-HER 1254 - used - Welded frame with extremely high rigidity, Stable locking mechanism of the saw carriage at the top and bottom, Retractable splitter for cutouts, Control panel at eye level, Digital display on the length stop, Digital display for horizontal cutting, Lift-and-roll transport system, Additional length stop at the bottom, Super-Cut scoring saw with carbide tipped reversible inserts, Scoring device with counter-rotation, Edging support, Dust extraction system TRK, Tedpfsz Dt Nnsx Amrec Dust-tested ----- Technical data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Edging height: 2,100 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Dust extraction nozzle Ø: 120 / 100 mm, Space requirement (L x W x H): 5,400 x 2,900 x 1,600 mm, Weight: 800 kg Quality information: - Guide strips renewed / overhauled - Saw spindle newly re-lagered - Complete basic inspection - Complete basic cleaning - Electrical system checked - Immediately ready for use

Condition: used, PSK series, older generation Tank capacity: 40 to 120 L Standard power supply: 220/380 V three-phase 50 Hz Installed electrical power: 15 kW Electric heaters: 6 × 2.2 kW Compressor power: 3.5 kW Agitator motor power: 0.65 kW Minimum water pressure: 2 atm Water consumption: 400 L/h Thermal fluid: inhibited glycol + water Thermal fluid quantity: 22 L 3-digit digital display 6 operating controls 4 programming controls 7 indicator lights Pasteurization temperature: 50 to 90 °C Programmable holding time: 0 to 30 min Continuous agitation during pasteurization Automatic cooling down to +4 °C Automatic holding at +4 °C Agitation: 15 s every 15 min during holding Discharge by gravity or with agitation Water inlet control to the tank Todpfx Ajzx Uhqomroc Water control for cleaning the tap Dimensions (L × W × H): 640 × 880 × 1065 mm Net weight: 255 kg Cattabriga PSK 125 ice cream pasteurizer – capacity 40 to 120 L General overview The Cattabriga PSK 125 ice cream pasteurizer is designed for the thermal treatment of mixes used in the production of ice cream and artisanal gelato. This data sheet corresponds to the older generation PSK 125 identified on your machine, which is different from the newer KEL and PRO versions. Its working capacity ranges from 40 to 120 L, allowing for the processing of large volumes of mix in a single tank. What sets this model apart This version of the PSK 125 is based on a robust design combining electric heating, mechanical agitation, and a thermal circuit. The total installed power reaches 15 kW, with six 2.2 kW heaters. The agitator is driven by a 0.65 kW motor, while the compressor delivers 3.5 kW. The control panel features a digital display and controls for operating the machine without using the touch interfaces of the newer generations. Key advantages Capacity of 40 to 120 L for different preparation volumes Installed power of 15 kW, suitable for this tank capacity Integrated mechanical agitation during mix processing Thermal circuit using a mixture of inhibited monopropylene glycol and water Electronic controls with digital display Compact construction with a height of approximately 1065 mm

Condition: used, Hydraulic power unit with piston pump PUMPEN WART in Erkrath High-pressure pump, high-pressure hydraulic unit (in need of repair) Type SJK2C Serial No. 48315, Order No. 230045 Year of manufacture: approx. 1975 Pressure capacity: 1000 bar (according to nameplate) Flow rate: 25 liters/min (according to nameplate) Flow rate: 25 liters/min (at 0 bar) Flow rate: approx. 3 liters/min (at 1000 bar) Piston pump with 2 pistons, 50 mm stroke 280 double strokes per minute Tank capacity: approx. 100 liters Motor power: approx. 11 kW Power connection: 380 volts, 50 Hz Required space (L x W x H): 1000 x 600 x 1200 mm Weight: approx. 350 kg No proper function during test run, although the unit was last used on a test bench. Possible issues due to extended downtime and storage period. Sale without functional guarantee, without technical demonstration, at a special price. Tjdpfoxcimpex Amrec

Condition: used, input voltage: 380 V, total length: 1,282 mm, total width: 800 mm, total height: 1,300 mm, tank capacity: 180 l, power: 4 kW (5.44 HP), Brand: DIOSNA Flour capacity: 75 kg Dough capacity: 120 kg Bowl capacity: 180 L Number of speeds: 2 Number of timers: 2 Tool power: 4 / 8 kW Voltage: 380 V Frequency: 50 Hz Dimensions: 800 x 1282 x 1300 mm DIOSNA SP 120 D spiral mixer – 75 kg flour capacity The DIOSNA SP 120 D is a spiral mixer with a fixed bowl, designed for professional bakery production. Its capacity is 75 kg of flour and 120 kg of dough, with a 180 L bowl. This used unit is equipped with two speeds and two timers, a configuration suitable for organizing successive kneading cycles. Why this model stands out The SP 120 D combines a permanently installed bowl with a machine that remains mobile. The DIOSNA kneading geometry is designed to work with both small quantities and the maximum allowable load. The manufacturer targets this range in particular for wheat doughs, mixed breads, and wholemeal doughs. The D version has two kneading speeds and two timers, allowing the phases of the cycle to be linked together with automatic speed changes. Key benefits Capacity up to 75 kg of flour Up to 120 kg of dough per kneading Fixed 180 L stainless steel bowl Todpfx Aez Arm Esmrec Stainless steel kneading spiral Two speeds and two timers Bowl protection limiting flour dispersion Mobile machine despite its fixed bowl Smooth surfaces for easy cleaning Detailed technical specifications

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 12J10E, Used unit of VerderAir VA50 Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations. The specific arrangement code you provided (VA50 SS SS TF TF) designates a heavy-duty metallic pump constructed with a stainless steel fluid section, stainless steel seats, and PTFE (Teflon) balls and diaphragms. SKU 810.2392, serial number: 12J10E, year of manufacture: 2010, maximum air pressure: 8.5 bar; MFR: 568 L/min; as good as new condition This Air Operated Diaphragm Pump is suitable for the transfer of chemicals, solvents, flammable liquids, and fluids with abrasive particles. Constructed of Stainless Steel and PTFE (Teflon) Energy efficient Easy to install, operate and maintain Anti-ice muffler Free of air lubrication Non-stalling air valve Can run dry without damage Dry self-priming Key Technical Specifications Knowing these parameters can help you accurately list your pump for sale or verify if it meets your facility's operational needs: Maximum Flow Rate: 568 L/min (approx. 150 GPM) Maximum Discharge Pressure: 8.4 bar (approx. 122 PSI) Tjdpfjzz Twcox Amrjc Liquid Connections: 2" BSP/NPT Air Inlet Connection: 1/2" NPT Wetted Materials: Stainless Steel (SS) housing with PTFE (TF) diaphragms/balls, making it highly resistant to aggressive chemicals, solvents, and abrasive media. Maximum Suction Lift: 2.5 m (dry) / 5.5 m (wet) Certification: Standard metallic configurations usually come with ATEX certification for hazardous environments Price: 6.160 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. Wir sprechen Deutsch/Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, mileage: 331,428 km, power: 265 kW (360.30 HP), first registration: 10/2008, fuel type: diesel, empty load weight: 25,780 kg, maximum load weight: 220 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 4,200 mm, next inspection (TÜV): 11/2026, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, seat heater, traction control, Vehicle location: Bovenden, rental location, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, 16-speed gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, fog lights, work lights, leaf spring suspension, aluminum tank, low-noise G1, sunroof, 4-point hydraulic support, green environmental badge. Wheelbase: 4200 mm, Superstructure: Schwing-Stetter P2023 concrete pump with S31XT8 mast (approximate reach 30.5m), 7.5t front axle, H7 13t rear axle, bevel gear 233, disc brakes on front and rear axles, Telligent braking system with ABS and ASR, pipe rupture protection for braking system, rear axle stabilizer, steel bumper, PSM, distributor cockpit, reinforced clutch, construction site filter, on-board diagnostics 2, transmission oil cooling, auxiliary drive independent of transmission MB 1.4, transmission lock NMV. Operating hours concrete pump: approx. 4644h Tedoz E Nitopfx Amrec Operating hours mast: approx. 5928h ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: excellent (used), For sale: BECKER vacuum pump, type 80/4-90. This unit comes from an industrial application and is in good used condition. The pump is equipped with a power cable and a CEE plug. Technical data from the nameplate: Manufacturer: BECKER Type: 80/4-90 Year of manufacture: 2004 Motor: three-phase (3~) Motor number: 6603410 Power at 50 Hz: 0.75 kW Rotational speed: 1420 rpm Current: 4.5 / 2.6 A Tedpfxjzvzwtj Amrec Voltage: 175–254 V Δ / 300–440 V Y Frequency: 50 Hz cos φ: 0.70 Protection class: IP55 Operating mode: S1 Power at 60 Hz: 0.90 kW Speed at 60 Hz: 1720 rpm CE marking Standard: EN 60034 According to the service label, the manufacturer recommends an inspection every 5000 operating hours. The pump has normal signs of use. The visual condition and the scope of delivery are clearly shown in the photos.

Condition: excellent (used), For sale: an industrial KSB ETABLOC-G 32-125.1/222 centrifugal pump with a 2.2 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC-G 32-125.1/222 • Design: G11 • Identification number: 48862594 • Pump number: 5-927-141345/1 • Flow rate: 3–24.5 m³/h • Head: 27.5–17 m • Pump speed: 2900 rpm Motor specifications at 50 Hz: • Motor type: QU FS 90L2A-60 • Motor number: 367694 MX • Power: 2.2 kW • Voltage: 220–240/380–420 V • Current: 7.8–7.2/4.5–4.3 A • Speed: 2850 rpm • cos φ: 0.89 • Protection class: IP55 • Insulation class: F • Operating mode: S1 The unit has a sticker from the Elektromotoren Reparaturwerk ROCK specialist service, indicating an inspection carried out in November 2017. The pump and motor were likely refurbished and inspected by a specialist service. Tjdpezva S Aefx Amrsc Used condition. Normal signs of use and storage are visible. The exact condition is shown in the pictures.

Condition: new, For sale: a new, unused submersible pump for coolants, brand Speck, model TM-401-110.0005. The pump is designed for cooling systems, machine tools, and other industrial applications. Technical data: Manufacturer: Speck Model: TM-401-110.0005 ID number: 34206 Serial number: 1002283768 Year of manufacture: 10/2021 Power: 0.5 kW Tjdpfxezvh Aij Amroc Maximum flow rate: 40 l/min Maximum head: 38 m Power supply: three-phase Frequency: 50 Hz Voltage 380 V: 1.35 A, 2820 rpm, cos φ 0.73 Voltage 415 V: 1.55 A, 2850 rpm, cos φ 0.61 Protection rating: IP54 Insulation class: F (155)

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 32-200/552.2 centrifugal pump with a 5.5 kW electric motor. The pump comes from a warehouse stock and has never been used. It is offered with the original KSB carton. A professional, industrial monobloc pump from the renowned manufacturer KSB, designed for use in industrial installations, water circulation systems, cooling and heating systems, and technological systems. Technical data: Manufacturer: KSB Model: ETABLOC-G 32-200/552.2 Ident-No.: 48862635 Flow rate Q: 5–33.5 m³/h Head H: 47.5–25 m Pump speed: 2900 rpm Motor power: 5.5 kW Tjdozvrb Nspfx Amroc Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Motor speed: 2880 rpm Ingress protection: IP55 Insulation class: F Net weight according to label: 62 kg Condition: NEW / UNUSED – warehouse stock. Original KSB carton included. The item sold is exactly the one shown in the pictures.

Condition: excellent (used), For sale is a Pumpen Distel type 50/200 centrifugal pump equipped with an 11 kW electric motor from Antriebstechnik G. Bauknecht AG. The pump is used and in working order. Visually, it is in good used condition and has normal signs of use and storage. The actual condition and completeness are shown in the photos. Technical data of the pump: Manufacturer: Pumpen Distel Tjdpfx Ajzvyw Eemrjc Type: 50/200 Serial No.: 78756 Flow rate Q: 40 m³/h Pressure: 4.5 bar Rotational speed: 2900 rpm Power: 11 kW Connections: flanged Technical data of the electric motor: Manufacturer: Antriebstechnik G. Bauknecht AG Type: RF 11/2-75 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Insulation class: B Operating mode: S1 Mounting form: B3/B5 Condition: Used, in working order. Has normal signs of use and storage. Scope of sale: Complete centrifugal pump with an 11 kW electric motor – exactly as shown in the photos.

Condition: excellent (used), For sale: KSB ETABLOC G 32-200/752 centrifugal pump with electric motor. The pump has been inspected and is in fully working condition. It features a robust industrial design from the renowned manufacturer KSB, and is suitable for water, circulation, and various industrial applications. Technical data: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 32-200/752 No.: 0-118-902 133 Flow rate Q: 10–37 m³/h Head H: 57–34 m Rotational speed: 2950 rpm Motor power: 7.5 kW Voltage: 380 V Current: 14.2 A cos φ: 0.91 Frequency: 50 Hz Protection class: IP54 Insulation class: B Todpfx Amszvzvijrsc Motor: three-phase Motor type: ZKA 132 S-2 Connections: flanged Condition: used, inspected, and in fully working condition. It has normal signs of use and storage, as visible in the photos. The item for sale is a complete KSB pump with an electric motor, exactly as shown in the photos.

Year of construction: 2009, condition: used, For sale are 8 free-flow centrifugal pumps from Pumpenfabrik Wangen, manufactured in 2009. These are the ESP model. Five of the eight free-flow centrifugal pumps have a motor. Tedpfxsga Dtco Amroc Quantity: 5 / 3 with motor Length: 172cm (without motor) / 229cm (with motor) Height: 34cm Manufacturer: Pumpenfabrik Wangen Type: ESP No.: 920607 Year of manufacture: 2009 Connections: DN100 PN16 Motor: SEW Eurodrive Type: RF77DV100L4/TF No.: 01.1280626601.0003.09 rpm: 1400/48 kW: 3/S1 V: 230/400 A: 11 / 6.30

Condition: ready for operation (used), Busch vacuum pump center with control box Busch type: 251-512, 023. 0.5 bar Qt. 6 liters Busch type: CB 0220 D / P 0.5/5 Pumps are tested. Siemens control TD 200 Control not tested Pumps are tested and working. Tedpjvx Avgefx Amrec

Condition: new, functionality: fully functional, The range includes high-quality SAP pumps for coolant and emulsion, designed for use in various metalworking machines, such as band saws and circular saws, drilling machines, lathes, milling machines, CNC machines, and other industrial systems for cooling and circulating emulsions. They are suitable both for replacing an existing pump and for manufacturing or upgrading a cooling system on a machine. Several different models are available, including SA, PA 35, PA 70, PA 150, and PA 180, with varying flow rates, power outputs, and submersion depths. Depending on the model, the pumps are available for 230 V or 400 V connection. Advantages: - reliable operation, - easy installation, Tjdpsz Aqi Sofx Amrsc - various sizes and flow rates, - 230 V and 400 V versions, - suitable for coolant and emulsion, - several different submersion depths, - suitable for a wide range of machining machines. To select the appropriate model, please inform us of the voltage, required submersion depth, and desired flow rate.

Condition: used, mileage: 306,416 km, power: 310 kW (421.48 HP), first registration: 02/2016, fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 10/2028, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, Internal vehicle number: G400191 Available immediately at our yard in Kaufungen. For more information, please contact: Tjdpfx Aez Axcgsmrjc * Luis Lucena * Viktoria Sologubova Mercedes-Benz Arocs 3742 8x4 Concrete Pump Sermac 5Z42 | 42 m | Euro 6 For sale: a used Mercedes-Benz Arocs 3742 8x4 concrete pump with a Sermac 5Z42 superstructure, manufactured in 2016. The vehicle features a 42-meter outrigger boom, a 420 hp diesel engine, automatic transmission, and air conditioning. Vehicle specifications: * Manufacturer/Model: Mercedes-Benz Arocs 3742 * Vehicle type: Concrete pump * First registration: 01/2016 * Year of manufacture: 2016 * Mileage: 306,416 km * Operating hours (pump): 4,086 * Power: 309 kW (420 hp) * Engine displacement: 12,809 cm³ * Cylinders: 6 * Fuel: Diesel * Transmission: Automatic * Emission standard: Euro 6 * Environmental badge: 4 (Green) * Axles: 4 * Axle configuration: 8x4 * Permissible gross weight: 37,000 kg * Unladen weight: 31,895 kg * Payload: 5,105 kg * Air conditioning * Colour: Green * MOT: New * Vehicle number: G400191 * Condition: Used * German vehicle Concrete pump specifications: * Manufacturer: Sermac * Model: 5Z42 * Type: SCL150AHP * Year of manufacture: 2016 * Serial number: P9054 * Maximum vertical reach: 41.1 m * Maximum horizontal reach: 37.1 m * Maximum end-hose length: 4 m * Delivery pipeline: 125 × 4.5 mm * Maximum hydraulic oil working pressure: 380 bar * Theoretical concrete pressure: 76 bar Inspection is possible by prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. Financing example: * Internal number: G400191 * Purchase price: €189,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €2,949.02 * Residual value: €34,380.00 If you are interested in this offer or would like to adjust it to your needs, please contact Mr. Enchev.

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 42,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 10/2028, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: air conditioning, Internal vehicle number: G300327 Available immediately at our yard in Kaufungen More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: G300327 * Purchase price: 321,900.00 EUR * Down payment: 10% * Term: 60 * Monthly payment: 4,950.02 EUR Residual value: 60,080.00 EUR If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as part of the payment. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH Todpfxoytllks Amroc We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, PJM pumps are designed for pumping clean and slightly contaminated water in water supply installations, booster sets, pump units, heating systems, and other installations, such as industrial systems. They can also be used for pumping other non-aggressive liquids that do not affect the materials the pump is made of. Tedpoyaqchjfx Amrec

Condition: used, AD planer Rojek 410, good condition, year 1997, standard equipment, 3.4 kW S1, 400 kg Tedpfewzzg Uox Amrsc Price changes reserved, errors, printing and typesetting mistakes excepted.

Condition: used, Format circular saw CMA2000 S315 2.5m, like new, standard equipment, 4 HP, 2500 mm cutting length, approx. 400 kg Tsdpfxowzziij Amrsc Price changes, errors, and typographical mistakes reserved.

Condition: used, Year of construction: 2024, tank capacity / l Todpfxeyn R Sxj Amrec working pressure / bar feed pressure / bar weight / kg required space 1,72 x 1,00 x 1,81 m HYDAC hydraulic unit CA2R05H07.4-155-03-20X+3055404+G24-XXX Condition: As new

Condition: used, feed pressure / bar liter capacity / l Tsdpfx Ajy Suzasmrec power capacity / kW KSB ETAPRIME 4.14 222 GB09 close-coupled pump Weight: 45kg