Used Daub Slim 700 for sale (5,906)

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Crsdpfx Akeua Tbwjcob Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, Year of construction: 2014, Folding machine MBO T700/4 Year: 2014 Description: - 4 page folder - MBO Navigator Feeder - Round pile feeder: R 700 Cjdpfx Asyzdt Dokcjrb - Pump Buckle folding unit: 1 MBO FP 10 - Automatic buckle plate adjustment - First buckle folding section with 4 buckle plates - Slitter shaft cassette - Perforating shaft - Anti noise hood(s) - Excluding delivery Max. mechanical speed: 30 - 230 m/min Maximum size range: 68 x 120 cm Minimum size range: 15 x 20 cm

Condition: used, Composed of: 1) Dough storage hopper Mod. 'STAR' 2) Conveyor L=500 Mod. 'TRL' 3) Dough extruder Mod. 'RON 1/480' 4) Conveyor L=700 Mod. 'MCI 690' 5) Dough flouring unit L=700 Mod. 'B/M 700L' 6) Multi-roller unit Mod. 'MUL 700' 7) Conveyor L=700 Mod. 'MCI 690' 8) Fat extruder Mod. 'EG-7-E' 9) Overlapping conveyor belts Mod. 'NPP/200' 10) Conveyor L=700 Mod. 'MCI 690' Year of manufacture 2006 Cedpjwxwiaofx Akcsrb

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, Features Crodpfx Aoytpl Uokceb Equipped as standard with forward and reverse rotation enabling thread cutting Tilting milling head on both sides for angled drilling, bevel milling, etc. Universal application, e.g. milling, drilling, tapping, etc. Large cross table with scale Infinitely variable speed control 2-speed gearbox for optimal power transmission High concentricity thanks to precision bearings Ergonomically designed control panel Digital display of feed and spindle speed Drill chuck B-16 Arbor Table length 700 mm Digital spindle feed display Digital spindle speed display EMC filter according to CE standard Safety guard Service tools Base / stand Technical data Drilling capacity in steel: 25 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 25 mm Distance between spindle and column: 170 mm Minimum distance between spindle and table: 45 mm Maximum distance between spindle and table: 325 mm Spindle travel: 52 mm Spindle speed range, variable: 50 – 3000 rpm Spindle taper: MT3 Table size: 700 x 180 mm Maximum X-axis travel: 490 mm Maximum Y-axis travel: 160 mm Tilting milling head: -90° / +90° Milling head height adjustment: 275 mm T-slot size: 12 mm Motor power: 1 kW Dimensions (L x W x H): 950 x 560 x 930 mm Weight: 160 kg Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,770 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, Attention – Images of milling accessories belonging to other machines were mistakenly included in this auction listing and have now been removed. Please refer to the updated scope of delivery as per the current images – approximately half of the accessories shown pertain to this machine. TECHNICAL DETAILS Working Area Swing diameter over bed max.: 920 mm Swing diameter over cross slide max.: 742 mm Max. turning length: 705 mm Bar capacity: 80 mm Travel X-axis: 260 mm Travel Y-axis: 50 mm Travel Z-axis: 795 mm Main Spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inch Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inch Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Shank cross-section: 25 mm Max. speed of driven tools: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Operating hours: 2,770 h Power-on hours: 10,820 h Dimensions & Weight Machine height: 2,000 mm Installation footprint: 3,347 x 2,106 mm Weight: 5,820 kg Credpfx Aoy A Nf Iekcsb EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes replaced; major maintenance package carried out approx. one year ago (machine has not been in operation since)! TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed range: 1 - 4,000 rpm Tool spindle speed: 10,000 rpm Bar capacity: 80 mm Mounting: MT5, revolving tailstock Without center Turret: 12 stations, bolt-on turret Overhang for driven tools: ±100 mm Assemblies: Integrated MK4 bearing for live center Chip and coolant system: Scraper-type chip conveyor with magnetic separator, discharge height approx. 1,000 mm Coolant system: high pressure 5 bar, pump 800 W, delivery rate 20 l/min Coolant shower at chuck, including high-performance pump Compressed air blow-off system for tool holder sleeves Compressed air blow-off system for tailstock live center Crodpfsy A Icrex Akcob Line filter for coolant system MACHINE DETAILS Control: M730UM, CELOS - ERGOline Touch Total power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) EQUIPMENT Interface for oil mist separator (diameter: 150 mm) Signal beacon: red, yellow, green, blue EtherNet/IP interface for automation Robot interface for portal robot DMG Mori Seiki Transformer: 45 kVA, three-phase autotransformer X-axis direction ISO Note: The machine is supplied without a chuck, tool pre-setter, or workholding devices.

Year of construction: 2022, condition: used, functionality: fully functional, Binderberger Firewood Saw WS 700 E — Year of manufacture 2022 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: Codpfx Ajy A Hbtjkcerb - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 1,250 plus VAT | EXW Einbeck | Delivery upon request

Condition: new, functionality: fully functional, power: 200 kW (271.92 HP), fuel type: electric, color: other, overall weight: 10,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI machines are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduce their service requirements and times, and to increase their crushing performance with their low investment costs. General Specifitions and Futures: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-700 • Type: Vertical Shaft Impact Crusher Closed rotor • Capacity: 100-150 tph • Max Feeding: 30 mm • Rotor Size: Ø 700 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 200 kW Bearings: Heavy duty SKF-FAG Cedpoy A Ex Rjfx Akcerb • Weight: 10000 kg • Dimensions: 4000 * 3000 * 2450 mm • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2021, condition: new, Single-head cutting machine OMC RONDA 700, new Machine in stock - saw blade D 700 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps Codpehrukiefx Akcorb - spray mist blade lubrication system - integral pneumatic protection

Condition: excellent (used), Year of construction: 2013, Airpress piston compressor model K 500 - 700 Super Motor power (HP/kW): 5.5 HP / 4.0 kW Compressed air tank volume (l): 500 Maximum pressure (bar): 15 Csdpfxeyy U S Uj Akcjrb Intake capacity (L/min): 700 L/min Output capacity l/min*: 450 L/min Sound level dB(A) (0 m): 99 Voltage (V): 400 V / 50 Hz / 3 phase Location: ex stock 54634 Bitburg - immediately available - Prior sale reserved

Condition: excellent (used), Universal milling machine, tool milling machine, milling machine, mill (used) Manufacturer: Maho Model: MH 700 Working area X: 500 mm Working area Y: 300 mm Working area Z: 400 mm Table clamping surface: 810 x 480 mm Spindle taper: SK 40 16 spindle speeds: 32 - 1600 rpm Feed X automatic: 10 - 500 mm/min Feed Z automatic: 10 - 500 mm/min Feed Y automatic: 5 - 250 mm/min Rapid traverse X/Y/Z Counter bearing Drive power: 4.2 kW Weight: approx. 2200 kg Coolant system Operating manual Tool cabinet included Rotary, tilting and swivelling table Machine dimensions: Depth 1950 mm, Width 1400 mm, Height 1750 mm Machine condition: very good, came from a research facility. Affordable shipping possible Crodsy Axviepfx Akceb Forklift on site, free loading onto truck Machine location: D-48477 Hörstel

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 270 kg, warranty duration: 24 months, empty load weight: 265 kg, Robust and compact construction High-quality components with a longer lifespan Csdpfx Asu Tqmdskcorb Above-standard productivity Adjustable bale height (three sizes) Automatic start for efficient compaction Bale trolley for easy transport Material selector for cardboard and plastic Full bale indicator and service indicator Compliance with EN 16500:2014 safety standards

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 22 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x14 ✔ Granulation: 10-50 mm Cedjhwwpzspfx Akcerb ✔ Capacity: up to 5 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 1446 x 1342 mm ✔ Dimensions L/W/H: 1,92/1,55/1,79 m ✔ Weight: 1750 kg 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Shredder: Crjdetpvdhepfx Akceb ✔ Power: 22 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 28 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Filling opening: 1446 x 1342 mm ✔ Weight: 1750 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours

Condition: used, Year of construction: 1999, Shredder Nazzareno K700 Csdpfswh Na Aox Akcerb Serial number: 97013 Year of manufacture: 2007 Motor power: 18.5 kW Opening: 740x1400 mm Rotor length: 750 mm Screen diameter: 10 mm Includes feeding conveyor Transport dimensions: 3600×1350×1900 mm (L×W×H), Weight: 3500 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 97013 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Empty weight: 800 kg Price: On request - Year: 2017 Cjdjxan Utepfx Akcerb - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2024, Felder Edge Sander FS 700 K Oscillating sanding belt Technical specifications Dimensions [mm]: 1875 x 776 x 1437 Working height [mm]: 895 - 1024 Frequency [Hz]: 50 Weight [kg]: 295 Power [kW]: 3 Tilt angle [°]: 0-45 Sanding belt dimensions [mm]: 3000 x 200 Sanding belt speed [m/s]: 19 Crodpfxsy Amv Ro Akcob Voltage [V]: 3 x 400 Year of manufacture: 2024 Condition: very good Price

Condition: good (used), functionality: fully functional, OMGA Radial 700 Radial Arm Saw Max cutting width at 90°: 700 mm Max cutting height: 110 mm Saw unit adjustable for angle in two planes Saw blade speed: 3000 rpm Main motor power: 2.61 kW Pneumatic feed of the saw unit Csdpfeyym Afox Akcorb

Condition: used, mileage: 601,000 km, power: 316 kW (429.64 HP), first registration: 03/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 6,100 mm, loading space width: 2,460 mm, Year of construction: 2008, Equipment: ABS, air conditioning, crane, MAN TGA 35.430 / 8x2 Platform 6,10 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2008 ? MILAGE: 601 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH Cjdpfx Akow Ruf Iecerb PLATFORM: 610 x 246 cm (L x W) CAPACITY: 13 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 185/350/136 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: HIAB 700 E - 6 + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 42138

Year of construction: 2002, condition: good (used), functionality: fully functional, Temperature max: 700° Celcius Opening LxH: 1.500 x 30 mm Crodpfx Akewi Ry Hocsb Country of origin: The Netherlands Electric power: 14 kW Machine LxWxH: 2.000 x 1.000 x 1.700 mm Machine weight: 1500 kg

Year of construction: 2023, condition: excellent (used), Zerma Amis granulator type: GSE 700/1400 C 7-3 GSE 700 Economic compact granulators Externally adjustable knives using setting gauge Mobile, compact design Optimal accessibility Aggressive, tangential material feed Screen perforation: 4 mm Drive: 90 kW Feed opening: 720 x 1400 mm Rotor diameter: 700 mm Rotor knives: 7 x 4 Stator knives: 3 Weight: 6700 kg Prepared for extraction system Housing upper part opening: hydraulic Screen basket operation: hydraulic Crodpfxsyx I R Us Akcsb Location: ex customer site - immediately available - Subject to prior sale.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Stamp: for Herrenknecht tunnel boring Crjdpfx Asb A Rcuskcsb -Piston diameter: approx. 150 mm -Piston rod: Ø 110 mm -Stroke: 700 mm -Usable: universal -Number: 2 cylinders available -Price: per piece -Dimensions: 950 x 300 mm -Weight: 150 kg/piece

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 45 mm, For sale: injection moulding machine by KraussMaffei, model KM 125-700C2. The machine is fully functional and was in production until recently. Technical specifications: Year of manufacture: 2000 Operating hours: 69,000 h Clamping force: 125 t Screw diameter: 45 mm Needle shut-off: Pneumatic Core pull: 2*Hydraulic Internal pressure sensor Crodpfx Aox Ituqokcjb

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Cjdpfsyilyqjx Akcorb Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: good (used), Year of construction: 2017, operating hours: 8,800 h, functionality: fully functional, machine/vehicle number: NL2561708843, number of spindles: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities: Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length max. (mm): 705 Turning diameter max. (mm): ø 366 Cedpfsyzxcgjx Akcsrb Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool Magazine: Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5 / 4.9 / 4.2 (3 min / 5 min / continuous) Rapid traverse (m/min): 30 Main Spindle: Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5 / 18.5 / 15 (25% duty cycle / 50% duty cycle / continuous) Max. torque (Nm): 49 Sub-Spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11 / 7.5 (25% duty cycle / continuous) Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System: Tank capacity (liters): 366 Equipment: Chip conveyor Signal tower Machine operating hours: Power on hours: 19,393 Cutting time: 8,800 Rated power requirement (kVA): 48 Basic machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 The depicted tools, driven tools, and both chucks are not included in the scope of delivery.