Used Cte Traccess 200 Diesel Cte for sale (22,118)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: Ppedpfx Ajy Hkd Hsk Dor - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller". Pjdpfxjw S Dmde Ak Depr

Condition: used, Year of construction: 2009, operating hours: 5,593 h, machine/vehicle number: 0300137313, fuel type: diesel, Weights Empty weight: 20.058 kg Functional Mast: articulated arm Lifting capacity: 454 kg Working height: 4.010 cm Dimensions of cargo space: 1448 x 249 x 305 cm Other information Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: Outrigger Max. horizontal reach: 1925 m Additional information Ppodpfx Asy Hbtlsk Dor Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / All-Electric Injection Moulding Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 25 mm Shot weight: 39 g Injection pressure: 1580 bar Dosage volume: 44 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping system: toggle lever Control system: NC5 - touchscreen Additional equipment: All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface 4x air valve Hot runner control Hardened injection unit – bimetallic Central lubrication Screw diameter can be changed Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Ppjdpfoy Dp E Rsx Ak Dor Price: On request

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Ppodpfxjy Dqiqo Ak Der Price: Upon request

Condition: excellent (used), Year of construction: 2012, Engel e-victory 200/80 with Engel Viper 12 Robot / Electric Machine / Operating hours: approx. h in automatic mode Year of manufacture: 2012 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 71 g Injection pressure: 2400 bar Dosage volume: 85 ccm Psdjy Dp Irspfx Ak Dopr Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: electric Clamping unit: hydraulic Control system: CC 200 – touchscreen Additional equipment: Production line with Engel Viper 12 Machine is in very good technical condition Electric machine: energy-efficient and very quiet Operating hours: approx. in automatic mode Air valve x 4 Hydraulic core pull x 1 Controller with 12 hot runner zones Injection unit is wear-resistant and corrosion-resistant Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Kistler sensor – mold pressure regulation Parallel movements Engel Viper 12 Robot Year of manufacture: 2012 5-axis robot: 3 axes driven by servomotors (electric): X, Y, Z; B-axis pneumatic and C-axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra charge Dimensions: Weight: 5500 kg Length/Width/Height: 4.40x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2013, Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring. Circular saw blade diameter: 200 - 840mm Circular Saw Bore Diameter: from 16 mm Tooth pitch: 6 - 180mm grinding path: up to 25 mm tangential relief angle: 0 to 10 degrees max. grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Pjdov Sbmqopfx Ak Depr Grinding spindle variable: 1600 - 5500 rpm, Connected load approx.: 8kVA (400V / 50Hz) Dimensions W x D x H =: 2770x1900x2045mm mass: approx. 4700 kg colour: Gray

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length: Podpfjwp Ebljx Ak Djpr

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Ppedpfsyvgf Dex Ak Dor Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Ppsdpfoycckcsx Ak Djr Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 4,985 h, load capacity: 2,000 kg, lifting height: 3,550 mm, fuel type: diesel, mast type: simplex, construction height: 2,350 mm, drive type: Diesel, Diesel forklift Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Ppodpfx Aksy E U Tpo Der Sideshift, 3rd valve,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 330 h, load capacity: 2,000 kg, lifting height: 1,600 mm, free lift: 172 mm, fuel type: electric, mast type: simplex, construction height: 1,335 mm, fork length: 1,200 mm, empty load weight: 1,350 kg, total length: 1,600 mm, drive type: Elektro, construction width: 790 mm, High lift truck Load center: 600 Ppedpfx Asqynq Rsk Der Mast type: Standard Technical condition: very good Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 300Ah Battery year of manufacture: 2022 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). With power steering. Pulse control, initial lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,883 h, load capacity: 8,000 kg, lifting height: 3,150 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,900 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Superelastic Front tyres condition: 20 - 40% Pedpfx Ajy E Uw Iok Depr Rear tyres type: Superelastic Rear tyres condition: 40 - 60% Description: 3rd valve, 4th valve, rear work lights, front work lights, roof cover, heating, full cabin,

Condition: used, functionality: fully functional, Year of construction: 1991, operating hours: 11,154 h, load capacity: 8,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,120 mm, fork carriage width: 2,150 mm, fork length: 2,400 mm, empty load weight: 11,520 kg, total length: 3,700 mm, drive type: Diesel, construction width: 2,240 mm, Diesel Forklift Load Center: 600 mm Ppsdpfx Aey E Uv Rek Djr Fork Width: 200 mm Fork Thickness: 90 mm Mast Type: Standard Condition: Operational and fully functional Technical Condition: Very good Front Tyres Type: Superelastic Front Tyres Size: 8.25-15 Rear Tyres Type: Superelastic Rear Tyres Size: 8.25-15 Description: In addition to this Still model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase & financing options are always available on attractive terms. We are also interested in purchasing your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice about this R70-80. P.S.: Our master workshop is specialized in repair, maintenance, overhaul and customization of forklifts from 8 tons upwards. We are also happy to display your vehicle for consignment sale with us. Side shifter, Heater, Full cabin,

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 18,542 h, load capacity: 10,000 kg, lifting height: 3,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,400 mm, fork carriage width: 2,500 mm, fork length: 2,000 mm, empty load weight: 18,160 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,600 mm, Diesel forklift Load center: 1200 mm Fork width: 220 mm Fork thickness: 90 mm Mast type: Standard Condition: Ready for use and fully functional Ppodoy E Uv Dopfx Ak Djr Technical condition: Very good Front tire type: Pneumatic Front tire size: 11.00-20 Rear tire type: Pneumatic Rear tire size: 11.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Leasing and financing at attractive terms are always possible. We are also happy to purchase your used machine directly, even without you buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this DCG100-12. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. We can also sell your vehicle on consignment at our facility. Sideshift, fork positioner, Heater, full cab,

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 7,270 mm, total length: 5,670 mm, - Tragfähigkeit: 4999 kg - Lastschwerpunkt: 500 mm - Lastabstand 540 mm - Achslast mit Last vorn 10468 kg - Achslast ohne Last vorn/hinten 2956/3635 kg - Reifengröße vorn: 355/45-15 - Reifengröße hinten: 250-15 - Räder Anzahl vorn/hinten: 2x/2 - Spurweite: vorn Einfachreifen 1210 mm - Spurweite: vorn Doppelreifen 1364 mm - Spurweite hinten 1120 mm - Neigung Hubgerüst/Gabelträger, vor/zurück 3/7 Grad - Sitzhöhe: 1298 mm - Kupplungshöhe: 496 mm - Gabelträger: Kategorie 3 / Forma A - Arbeitsgangbreite bei Palette 1000 x 1200 quer: 4470 mm - Arbeitsgangbreite bei Palette 800 x 1200 längs: 4670 mm - Wenderadius: 2730 mm - Kleinster Drehpunktabstand: 746 mm - Fahrgeschwindigkeit mit/ohne Last 20/20 km/h - Hubgeschwindigkeit mit/ohne Last min. Lüfterdrehzahl 0,50/0,53 m/s - Senkgeschwindigkeit mit/ohne Last 0,50/0,50 m/s Pjdpey E Uiksfx Ak Depr - Steigfähigkeit mit/ohne Last />30 % - Betriebsbremse mechanisch - Motorhersteller/Typ Deutz/TCD 2,9 L4 - Nenndrehzahl: 2200 1/min - Max. Drehmoment 260 Nm - Anzahl Zylinder/Hubraum 4/2900 cm³ - Arbeitsdruck für Anbaugeräte 250 bar - Ölmenge für Anbaugeräte 30 l/min - Anhängekupplung Bolzen

Condition: new, Year of construction: 2021, load capacity: 4,000 kg, lifting height: 4,400 mm, total length: 4,000 mm, - Geschwindigkeit mit/ohne Last 24 km/h - Kabinendach aus Kunststoff, Heizung - Ventile 3 - Nenntragfähigkeit/Nennlast 5000 kg - Lastschwerpunktabstand 500 mm - Lastabstand 567 mm - Achslast beladen kg 10780/1360 - Achslast unbeladen kg 3300/4060 - Spurweite mm 1180 - Spurweite mm 1190 - Neigung Mast/Gabelträger α/β ° 6/12 - Sitzhöhe bezogen auf SIP/Ständerhöhe mm 1315 - Kupplungshöhe mm 380 - Gangbreite für Paletten 1000 x 1200 quer Ast mm 4597 - Gangbreite für Paletten 800 x 1200 längs Ast mm 4797 - Wenderadius mm 2830 - Kleinster Drehpunktabstand mm 900 - Fahrgeschwindigkeit beladen/unbeladen Km/h 22/24 - Hubgeschwindigkeit beladen/unbeladen m/s 0.45/0.49 - Senkgeschwindigkeit beladen/unbeladen m/s 0.38/0.26 - Zugkraft beladen/unbeladen kN 28/21 - Steigfähigkeit beladen/unbeladen % 20/20 Ppedpfsy E Uf Sox Ak Dor - Betriebsbremse Mechanisch/Hydraulisch - Nenndrehzahl l/min 2200 - Zylinderzahl 4 - Kapazität cm3 2482 - Emissionsgrad gem. gemäß EU-Verordnung 2016/1628 Stage III a - Bordnetzspannung V 12 - Art der Antriebseinheit Drehmomentwandler - Betriebsdruck für Anbaugeräte bar 200 - Ölmenge für Anbaugeräte L/min 101 - Kraftstofftank, Inhalt 90 - Anhängekupplung Typ DIN 15170 Bolzen

Condition: used, Year of construction: 2023, load capacity: 5,000 kg, lifting height: 3,770 mm, total length: 5,930 mm, Diesel forklift Ppsdoy E Ubajpfx Ak Der Linde H 50D-01/600 Drive Diesel Year built 2023 Lifting height (mm) 3,770 Lifting weight (kg) 5,000

Condition: used, Year of construction: 2020, load capacity: 8,000 kg, lifting height: 5,530 mm, fork length: 2,400 mm, total length: 6,320 mm, · Lastschwerpunkt 900 mm · Gabelträger mit 8 Rollen für hohe Beanspruchung · Doppelpedalsteuerung für Vorwärts- und Rückwärtsfahrt · hydrostatisches Bremsen · Joysticks in Armlehne integriert · Blendfreies Display mit Anzeigen für u.a. Tankinhalt, Uhrzeit, Betriebsstunden, Serviceinfos. · Variable Verstellpumpe für geringeren Energieverbrauch · Linde Engine Protection System (LEPS): Überwachung · Warnung und Leistungsreduzierung beim Über- bzw. Unterschreiten verschiedener Leistungsparameter wie Motorölstand/-druck, Kühlwasserstand/-temperatur, Hydrauliköltemperatur, Luftfilterunterdruck · Hohe Sicherheit und Stabilität durch Linde Torsionsstütze · Hydraulisch gedämpfter und gefederter Komfortsitz mit umfassenden Einstellmöglichkeiten · Luftfilter mit integriertem Zyklonenabscheider · Neu für Evo-Modelle: Automatische Geschwindigkeitsregelung in Kurven · Fahrdynamikeinstellung inkl. Hubleistungsanpassung · Bis zu 10% niedrigerer Kraftstoffverbrauch · Präzise Linde Load Control in Armlehne integriert Ppsdpfx Akjy E Ua As Dsr · Blendfreies Display mit Anzeigen für u.a. Tankinhalt, Uhrzeit, Betriebsstunden, Serviceinfos · Kontrollleuchten im Display für Motoröldruck, -überhitzung, Feststellbremse, akustischer Warnton für Motor- und Hydrauliköltemperatur, Luftfilterverschmutzung und Tankreserve · 12V Steckdose in Kabine · Achslast mit Last vorn/hinten kg 20580/2340 · Achslast ohne Last vorn/hinten kg 7540/7380 · Spurweite vorn 1752 mm · Spurweite hinten 1550 mm · Neigung Hubgerüst/Gabelträger, vor/zurück a/b (°) 5,0/9,0 · Sitzhöhe/Standhöhe 1505 (mm) · Kupplungshöhe 844 mm · Fahrgeschwindigkeit mit/ohne Last km/h 23/23 · Hubgeschwindigkeit mit/ohne Last m/s 0,51/0,54 · Senkgeschwindigkeit mit/ohne Last 0,56/0,48 · Zugkraft mit/ohne Last 54000 / 50000 N · Steigfähigkeit mit/ohne Last % 25/34 · Beschleunigungszeit mit/ohne Last s 6,7/5,9 · Betriebsbremse hydrost. · Nenndrehzahl min 2200 · Zylinderzahl/Hubraum cm3 4/4038 · Art der Fahrsteuerung hydrost./stufenl · Arbeitsdruck für Anbaugeräte bar 265 · Ölmenge für Anbaugeräte l/min 70 · Schallpegel am Fahrerohr dB(A) 77

Condition: used, Year of construction: 2021, load capacity: 4,000 kg, lifting height: 4,000 mm, total length: 4,000 mm, - Geschwindigkeit mit/ohne Last 24 km/h - Kabinendach aus Kunststoff, Heizung - Ventile 3 - Nenntragfähigkeit/Nennlast 5000 kg - Lastschwerpunktabstand 500 mm - Lastabstand 567 mm - Achslast beladen kg 10780/1360 - Achslast unbeladen kg 3300/4060 - Spurweite mm 1180 - Spurweite mm 1190 - Neigung Mast/Gabelträger α/β ° 6/12 - Sitzhöhe bezogen auf SIP/Ständerhöhe mm 1315 - Kupplungshöhe mm 380 - Gangbreite für Paletten 1000 x 1200 quer Ast mm 4597 - Gangbreite für Paletten 800 x 1200 längs Ast mm 4797 - Wenderadius mm 2830 - Kleinster Drehpunktabstand mm 900 - Fahrgeschwindigkeit beladen/unbeladen Km/h 22/24 Psdpfxjy E Uapo Ak Depr - Hubgeschwindigkeit beladen/unbeladen m/s 0.45/0.49 - Senkgeschwindigkeit beladen/unbeladen m/s 0.38/0.26 - Zugkraft beladen/unbeladen kN 28/21 - Steigfähigkeit beladen/unbeladen % 20/20 - Betriebsbremse Mechanisch/Hydraulisch - Nenndrehzahl l/min 2200 - Zylinderzahl 4 - Kapazität cm3 2482 - Emissionsgrad gem. gemäß EU-Verordnung 2016/1628 Stage III a - Bordnetzspannung V 12 - Art der Antriebseinheit Drehmomentwandler - Betriebsdruck für Anbaugeräte bar 200 - Ölmenge für Anbaugeräte L/min 101 - Kraftstofftank, Inhalt 90 - Anhängekupplung Typ DIN 15170 Bolzen

Condition: used, Year of construction: 2022, load capacity: 8,000 kg, lifting height: 4,460 mm, fork length: 2,400 mm, total length: 6,400 mm, · Lastschwerpunkt 900 mm · Gabelträger mit 8 Rollen für hohe Beanspruchung · Doppelpedalsteuerung für Vorwärts- und Rückwärtsfahrt · hydrostatisches Bremsen · Joysticks in Armlehne integriert · Blendfreies Display mit Anzeigen für u.a. Tankinhalt, Uhrzeit, Betriebsstunden, Serviceinfos. · Variable Verstellpumpe für geringeren Energieverbrauch · Linde Engine Protection System (LEPS): Überwachung · Warnung und Leistungsreduzierung beim Über- bzw. Unterschreiten verschiedener Leistungsparameter wie Motorölstand/-druck, Kühlwasserstand/-temperatur, Hydrauliköltemperatur, Luftfilterunterdruck · Hohe Sicherheit und Stabilität durch Linde Torsionsstütze · Hydraulisch gedämpfter und gefederter Komfortsitz mit umfassenden Einstellmöglichkeiten · Luftfilter mit integriertem Zyklonenabscheider · Neu für Evo-Modelle: Automatische Geschwindigkeitsregelung in Kurven · Fahrdynamikeinstellung inkl. Hubleistungsanpassung · Bis zu 10% niedrigerer Kraftstoffverbrauch · Präzise Linde Load Control in Armlehne integriert · Blendfreies Display mit Anzeigen für u.a. Tankinhalt, Uhrzeit, Betriebsstunden, Serviceinfos · Kontrollleuchten im Display für Motoröldruck, -überhitzung, Feststellbremse, akustischer Warnton für Motor- und Hydrauliköltemperatur, Luftfilterverschmutzung und Tankreserve Ppjdpfxoy E Uaie Ak Djr · 12V Steckdose in Kabine · Achslast mit Last vorn/hinten kg 20580/2340 · Achslast ohne Last vorn/hinten kg 7540/7380 · Spurweite vorn 1752 mm · Spurweite hinten 1550 mm · Neigung Hubgerüst/Gabelträger, vor/zurück a/b (°) 5,0/9,0 · Sitzhöhe/Standhöhe 1505 (mm) · Kupplungshöhe 844 mm · Fahrgeschwindigkeit mit/ohne Last km/h 23/23 · Hubgeschwindigkeit mit/ohne Last m/s 0,51/0,54 · Senkgeschwindigkeit mit/ohne Last 0,56/0,48 · Zugkraft mit/ohne Last 54000 / 50000 N · Steigfähigkeit mit/ohne Last % 25/34 · Beschleunigungszeit mit/ohne Last s 6,7/5,9 · Betriebsbremse hydrost. · Nenndrehzahl min 2200 · Zylinderzahl/Hubraum cm3 4/4038 · Art der Fahrsteuerung hydrost./stufenl · Arbeitsdruck für Anbaugeräte bar 265 · Ölmenge für Anbaugeräte l/min 70 · Schallpegel am Fahrerohr dB(A) 77

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 4608 1999, power: 5.6 kW (7.61 HP), volume flow: 200 m³/h, Dry air dryer Manufacturer: Motan Type: ADC 200/10/20 Connected load: 5.6 kW Dry air volume: 200 m³/h Material silos, 5 units Manufacturer: Motan Type: BC-30 Ltr. Additional heating: 1.55 kW Material conveying units, 5 units Manufacturer: Motan Podpfx Asyvfibsk Djpr Type: HLS-06-1-A000-0 With vacuum pump VACOM Type: VC 340-720 Power: 4.6 kW With central filter and Motan control

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE morbidelli x200 - Drilling and Milling Made for You! This numerically controlled machining center comes equipped with a comprehensive range of drilling and milling tools to meet any requirements in the processing of wood and similar materials. Highlights: • Powerful, featuring drilling spindles with 8,000 RPM and advanced technology – the most robust spindle available on the market, offering over 1,000 hours of maintenance-free operation • Better and more extensively equipped, with a multifunction table that allows for various configuration options, ensuring optimal setup according to your needs • Easier and more intuitive programming thanks to the integrated Cad-Cam module 'MAESTRO CNC' • User-friendly operation: the work table is accessible at all times, and both control cabinet and vacuum pump are integrated. In the PRO SPACE configuration, there are no safety barriers required Construction: The supporting structure consists of an exceptionally robust monolithic steel base, heavily ribbed and very rigid; its particularly wide support surface is specifically designed to ensure the machine’s stability, providing sustained precision regardless of working conditions, without the need for floor anchoring. The base provides a large, solid foundation for the moveable gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of withstanding the highest demands, resulting in superior performance quality and greater accuracy. Pjdpfx Aeywvldjk Djpr The movable portal is formed from a solid single piece, anchored to both sides of the base and running on high-quality prismatic guides with recirculating ball carriages. Dual drive motors on the X-axis ensure top performance even under heavy-duty conditions. Movement along the lower movable unit (X-axis) and along the gantry (Y-axis) is achieved via helical rack and pinion transmission. This enables higher tooth-by-tooth thrust, greater acceleration, and increased velocity along the X and Y axes. The specially designed helical gearing ensures lower wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, providing perfect balance under dynamic load as well as allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, guaranteeing top-quality finishing since potential vibrations are fully eliminated. Movement along the X-Y-Z axes is accomplished with brushless motors powered by digital inverters, offering: - Reduced processing times due to improved acceleration - Enhanced positioning accuracy with high-resolution encoders - No need for setup referencing upon startup thanks to absolute encoders - Practically no general maintenance required due to the brushless system, as there are no brushes Axis movement and general machine operating elements are managed by an industrial NS module with digital data transmission.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2017, total length: 14,010 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,110 mm, color: black, Year of construction: 2017, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Rear doors - Air suspension = Further Information = Axle configuration Pjdpfjy Ictvex Ak Depr Tyre size: 385/65R22.5 Axle brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 2: Alloy wheels; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 3: Alloy wheels; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Weights Empty weight: 7,300 kg Payload: 34,700 kg gross vehicle weight: 42,000 kg Maintenance APK (technical inspection): valid until 08/2026 Identification Registration number: OP-10-XL Further information Please contact Bob Beukers for more information.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, For sale is a climate test chamber KPK 200. The unit is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2011 Test chamber nominal volume: 280 dm³ External dimensions of chamber: 1500 x 2040 x 1075 mm Minimum installation dimensions: 2060 x 1095 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Podpfjy E Ilxjx Ak Dspr Viewing window, heated: 500 x 600 mm Number of shelves: 3 units Maximum permissible load: 90 kg, evenly distributed across 3 shelves Maximum load per shelf: 30 kg Test chamber material: Stainless steel Wst.-Nr. 1.4301