Used Cormak Threading Machine for sale (64,928)

Condition: good (used), Ingramatic RP1 Max diameter: M6 Max. thread length: 42mm Isdpfx Aqehrdnkousic Max. shank length: 75mm Year: 80's

Year of construction: 1989, condition: excellent (used), Capacity (mm): M8x60/80 Max Production: 300 ppm Year: 1989 Iiedpfx Ajliqf Noquec

Condition: used, Thead Roller TLM RP8 TLM TORTONA Year: 1995 Diameter range: 3-8 mm Shaft length under head: 90 mm Max. thread length: 52 mm Iisdpfxex Aqpro Aqujc Dies size:130/115x54

Condition: good (used), Thread cutting machine with Stehler jaws, thread cutting head Iijdpjb A Ncusfx Aquoc -Hole diameter: 190 mm -Size: 1/2 - 2 inches -Weight: 130 kg

Condition: good (used), Thread cutting machine, pipe thread cutter Iodpfx Asb A Rzwequoic -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 60 kg

Condition: good (used), Thread cutter, thread cutting machine, thread drilling machine -Integrated reversing gearbox: with rapid return -Nominal input: 230 watts -Max. cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg Ijdpfx Aqjb A N Ikoueic

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 2" inch Iijdeb A Iwcjpfx Aquec -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Iijdpfjhgnd Aex Aqusc Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Iiodpfx Aswk Nxqsquoc Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: used, Year of construction: 1986, workpiece diameter 460 mm threading length 900 mm thread pitch 100 mm total power requirement 10 kW weight of the machine ca. 8 t Isdot H Smtepfx Aqusic dimensions of the machine ca. m

Condition: used, Year of construction: 1991, workpiece diameter 30 mm threading length 110 mm thread pitch 0,5-2,75 mm/GG total power requirement 4,5 kW Iedpfet Hwzcox Aqujic weight of the machine ca. 1,7 t dimensions of the machine ca. m

Condition: used, Year of construction: 2011, workpiece diameter 320 mm Iijdpfx Ast Hxbdsquec threading length 570 mm thread pitch 315 mm total power requirement 17 kW weight of the machine ca. 12 t dimensions of the machine ca. m

Year of construction: 1985, condition: used, workpiece diameter 50 mm threading length 100 mm Iedpfxot Hwn Ne Aqueic thread pitch mm total power requirement 1 kW weight of the machine ca. 1500 kg dimensions of the machine ca. m

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Iijdpfxjt Hw N Ts Aqusc Control total power requirement 29 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm thread pitch 2-16 mm Iiedpfxetzdyzs Aqusc total power requirement 25 kW weight of the machine ca. 10,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1979, workpiece diameter 320 mm threading length 300 mm thread pitch mm Iisdpst Hwnpsfx Aqusc total power requirement 90 kW weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms

Condition: used, Year of construction: 1985, thread dia. 254 mm grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Iiedpfxet Hw U Ae Aqusc Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, stroke length: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Iedjxbfwzepfx Aqueic Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Voltage: 400 V, 50 Hz Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1200 Electric Tapping Machine – Advanced Precision for Industrial Applications The CORMAK RGE36PWx1200 electric tapping machine is an advanced tool designed for efficient and highly precise threading in industrial environments. Design and Technology of the CORMAK RGE36PWx1200 Tapping Machine The CORMAK RGE36PWx1200 has been engineered for intensive use in demanding industrial conditions. Its construction is characterized by high wear resistance and long service life. Driven by a servo motor, the tapping mechanism operates smoothly and without interruption. The tapping arm allows precise tool positioning, while the rotating motor assembly enables threading at various angles, increasing the machine’s versatility. Key design features of the CORMAK RGE36PWx1200 include: Iiedpeycdcgefx Aquec Tapping arm with quick-change chuck, enabling fast and secure mounting of taps Adjustable overload clutches, providing protection against excessive load Heavy-duty machine construction with micro-spray system, ensuring effective tool cooling, reduced lubricant loss, and extended tool life Efficient chip blower, ensuring optimal visibility during threading operations Precision and Work Efficiency of the CORMAK RGE36PWx1200 The CORMAK RGE36PWx1200 tapping machine delivers exceptional precision through the use of a modern servo drive and a rotating tapping arm. These advanced technologies allow quick and accurate setting of parameters such as rotational speed, thread depth, and tapping direction. The machine not only guarantees precise threading but also significantly faster operation compared to traditional manual methods. Work efficiency is further enhanced by integrated cooling systems that effectively prevent tool overheating and reduce wear. Thanks to these solutions, the machine can operate continuously, ensuring long-term productivity and consistent thread quality. The adjustable tapping arm enables precise machine positioning, which is crucial when threading large batches of components. Standard Equipment – CORMAK RGE36PWx1200 Touchscreen control panel – easy programming of tapping parameters such as rotational speed, tapping direction, and thread depth Rotating tapping arm – allows thread cutting at any angle Tap holders with overload clutches – protect the machine from excessive load and ensure long service life Micro-spray lubrication system – continuous tool cooling with minimal coolant consumption Chip blower – effective chip removal and improved visibility during tapping Technical Specifications – CORMAK RGE36PWx1200 Power: 2 kW Power supply: 230 V Weight: 56 kg Maximum arm reach: 1200 mm Maximum rotational speed: 125 rpm Included in the set: Tap holders for tap sizes from M5 to M36 *The machine is sold without a worktable, vise, and taps.

Condition: new, Year of construction: 2026, CORMAK RGE16PW Electric Tapping Machine – Precision and Performance for Industrial and Workshop Use The CORMAK RGE16PW electric tapping machine is an advanced device designed for cutting threads in a wide range of materials. It is suitable for both industrial applications and craft workshops. Design and Technology The CORMAK RGE16PW tapping machine has been engineered for intensive operation in demanding industrial environments. Its design is based on robust, precision-made components that ensure long-term reliability and consistent performance. The central element of the machine is the tapping arm equipped with a quick-change chuck, allowing fast and easy replacement of taps. This enables quick switching between different tap sizes, significantly improving work efficiency. The tapping arm is connected to a high-torque servo drive, enabling precise thread cutting. The use of a rotating arm provides excellent flexibility, allowing tapping at any angle, which makes the machine a versatile tool across various industries. In addition, the tap holders are equipped with adjustable overload clutches that protect the machine from damage in the event of excessive load. The entire structure of the CORMAK RGE16PW is designed for ease of use and durability. The drive mechanism is resistant to heavy-duty operation, while the cooling system ensures stable performance during long tapping cycles. Precision and Work Efficiency The tapping process using the CORMAK RGE16PW electric tapping machine delivers exceptional precision thanks to servo drive technology, which controls every movement of the tapping arm with high accuracy. The control system allows programming of key operating parameters, such as: Rotational speed – adjustment of the tap speed ensures optimal conditions for different materials, resulting in high-quality threads. Tapping direction – the ability to select the threading direction provides flexibility for various applications. Thread depth – precise setting of tapping depth, essential for threads with specific technical requirements. Standard Equipment of the CORMAK RGE16PW Tapping Machine Iedpoycc S Tofx Aquoic Touchscreen control panel – enables easy programming of tapping parameters such as rotational speed, threading direction, and thread depth Rotating tapping arm – allows thread cutting at any angle Tap holders with overload clutches – protect the machine from excessive load, ensuring long service life Micro-spray lubrication system – continuous tool cooling with minimal coolant consumption Chip blower – facilitates chip removal, improving visibility during tapping Technical Specifications – CORMAK RGE16PW Power: 0.6 kW Power supply: 230 V Weight: 30 kg Maximum arm reach: 1080 mm Maximum rotational speed: 375 rpm Included in the set: Tap holders for M3, M4, M5, M6–8, M10, M12, M13, M16 *The machine is sold without a worktable, vise, and taps.

Condition: new, Year of construction: 2026, CORMAK RGE30PW Electric Tapping Machine – Innovation, Precision, and Industrial Performance The CORMAK RGE30PW electric tapping machine is an innovative industrial tool that will revolutionize the way you cut threads in a wide range of materials. Iisdpfx Aeycdaljqujc Design and Technology The CORMAK RGE30PW electric tapping machine has been designed with efficiency, precision, and durability in mind. Its robust construction ensures long-term, trouble-free operation even under intensive use. Key components, such as the tapping arm, are engineered to provide exceptional stability and high accuracy during threading operations. A servo drive is the core element of the machine’s drive system, delivering high torque and ensuring smooth, accurate tapping. Thanks to the integrated cooling and chip removal systems, the CORMAK RGE30PW can operate continuously without the risk of overheating or contamination of the workpieces. The integrated micro-spray system and chip blower enhance operator comfort and machining efficiency by ensuring optimal tool cooling and clear visibility of the working area. Precision and Work Efficiency The CORMAK RGE30PW electric tapping machine offers outstanding precision through the use of advanced servo drive technology and a modern control system. The rotating tapping arm with a wide range of motion allows threading at any angle, significantly increasing the versatility of the machine. Adjustable rotational speed and thread depth provide full control over operating parameters, ensuring excellent thread quality in various materials. Standard Equipment – CORMAK RGE30PW Tapping Machine Touchscreen control panel – allows easy programming of tapping parameters such as rotational speed, threading direction, and thread depth Rotating tapping arm – enables thread cutting at any angle Tap holders with overload clutches – protect the machine from excessive load, ensuring long service life Micro-spray lubrication system – continuous tool cooling with minimal coolant consumption Chip blower – enables effective chip removal and improves visibility during tapping Technical Specifications – CORMAK RGE30PW Power: 1.2 kW Power supply: 230 V Weight: 50 kg Maximum arm reach: 1200 mm Maximum rotational speed: 200 rpm Included in the set: Tap holders for tap sizes from M5 to M30 *The machine is sold without a worktable, vise, and taps.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: NT2012, ESCOFIER MACHINE, EXCELLENT CONDITION, VERY LITTLE USED. 12-TON MACHINE. POSSIBILITY TO SEE IT OPERATING IN OUR WORKSHOP. Ijdpfoycq Ebox Aqujic

Year of construction: 1988, condition: new, Ingramatic RP1/R for washer assembly M6x75/40mm. Fixed die length: 85 mm. Moving die length: 95 mm. Die height: 65 mm. 230-600ppm. Completely overhauled like new. Machinery visible in Calolziocorte (LC) Iodpelcbkgsfx Aquoic REVISION ACCORDING TO CE STANDARDS. The review includes: - Disassembly and cleaning of each piece - Replacement of all bearings - Correction of guides or possible replacement - Introducer group revision - New washer assembly group - Slide unit overhauled with bronze gibs replaced - New lubrication system with hydraulic unit complete with pump, level switch, pressure switch and distributors - New die water pump - New cup vibrator diam. 670 mm. complete with vibrator control panel and overflow photocell - Revision of the roller evacuation group - Protective casing complete with lamp and micro - Solenoid valve installation with new air system for vibrator and guides - New electrical system in accordance with CE standards complete with inverter - New engine - Belt replacement - RAL painting indicated by you

Condition: used, thread dia. 3 - 10 mm Tools speed 120 - 600 U/min table-size 250 x 350 mm throat 250 mm voltage 380 V threading length 80 mm total power requirement 0,55 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,7 x 0,7 x 1,9 m Iijdpfxolwlk Ae Aqujc

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. For more information, please contact us. Iedow Al U Ejpfx Aqusic