Used Comexi Nexus Evo for sale (699)

Condition: used, moving point, moving center point, moving Morse taper, moving Nodpoc Nir Ijfx Ag Ijwn -Center point: 75/250 mm -barrel tip: shaft-mounted -Recording: MK7 -Weight: 34 kg

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Nedpfetp H Erox Ag Iown Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: excellent (used), Perlmühle Vollrath VMSM 2/8 B Ex-protected design Double chamber Nwodpfxeh Svr Se Ag Ijn Grinding pot 2 x 8 l Double jacket Power 18.5 kW In very good, ready-to-use condition, directly from production!!!

Condition: like new (used), Large tray sealer direct from UK meat factory where it was packing ground meat in MAP trays. We have two identical machines available. Nwjdpfx Agsilfkre Ijn

Condition: ready for operation (used), IKEGAI tool turret, 12-station, outer diameter: 3700 mm (without tool holders), flange diameter: 240 mm, bore diameter: 60 mm, from IKEGAI TURN 25, used, with normal signs of wear, 100% functional. NOTE: Please request a separate quote for packaging and shipping costs! Njdoi Ea Ucepfx Ag Iswn

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw Njdjquuvrspfx Ag Iown 3. Receiver tank - Low pressure - MAX 16Bar 4. Receiver tank - High pressure - MAX 45Bar

Condition: used, Power converter, power supply, power supply unit, switching power supply unit, power supply module, DIN rail power supply unit -Input: 3x 360-520 V AC 50/60 Hz 0.80 - 0.50 A -Output: 24 V 10A DC -Price: per piece -Number: 7 pieces Njdpfefkq Udsx Ag Ijwn -Dimensions: 130/85/H120 mm -Weight: 1.4 kg/piece

Condition: used, moving point, moving center point, moving Morse taper, moving Nodpfx Agjd R Smuo Iown -barrel tip: shaft-mounted -Recording: MK5 -Dimensions: Ø 85/220 mm -Weight: 2.8 kg

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, total width: 2,250 mm, total height: 4,000 mm, loading space length: 9,250 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, MAN TGS 35.520 8x2-6 BL CH Basic Data - The new MAN Truck Generation - MAN code: FPLOEBL5 - Euro 6e - Vehicle type: flatbed truck/chassis - Cab: TM (narrow, long, medium height) - Wheelbase: 4,105 mm - Rear overhang: 1,250 mm Weights (Permissible / Technical) - Gross weight: 32,000 kg / 34,500 kg - Front axle: 7,100 kg / 7,500 kg - Second front axle: 7,100 kg / 7,500 kg - Rear axle: 11,500 kg / 12,000 kg - Trailing axle: 7,100 kg / 7,500 kg Engine & Drive - Diesel engine: MAN D2676 LFBF, 382 kW / 520 hp, 2,650 Nm - MAN TipMatic 12.28 OD - 430 mm single-disc clutch - High-performance engine brake MAN EVBec - MAN EfficientRoll - MAN Idle Speed Driving Axles & Suspension - Front axle: 9,200 kg, offset, steered - 2nd front axle: 9,200 kg, offset, steered - Rear axle: HY-1350, 13,000 kg - Trailing axle: 9,000 kg, steered, liftable - Axle ratio: i = 3.08 - Air suspension - Digital axle load display - Shock absorbers and stabilizers on all axles Tires - FA/2nd FA/Trailing axle: Continental 315/60R22.5 EcoPlus HS3 - Rear axle: Continental 315/60R22.5 Conti Hybrid HD3 - Rims: Alcoa Dura-Bright EVO, 9.00x22.5 - Tire pressure monitoring system TPM Chassis - Longitudinal member thickness: 8 mm - Underrun protection: front, side, rear - Fuel tank: 300 l right, steel - AdBlue tank: 35 l right Electrics - 2x batteries 12 V / 210 Ah AGM - Alternator: 28 V / 120 A / 3,360 W - 24 V battery management system Brakes - Electronic braking system (EBS) - ABS - Full braking assistant - Disc brakes on all axles - Electronic parking brake - Anti-roll back function MAN EasyStart Cab - Comfort cab suspension - Electric glass sunroof - Central locking with remote - 4 vehicle keys - LED package Plus - High beam assistant - Automatic driving light control - 2 LED amber revolving beacons - Reverse warning system - Climatronic air conditioning - 4 kW supplementary water heater - Lower bunk with slatted frame - Leather multifunction steering wheel - Professional instrument cluster 12.3" - Digital tachograph with remote download - MAN Mediasystem Professional Navigation 12.3" - Advanced sound system with subwoofer Seats - Driver’s seat package Premium, air-suspended, heated - Passenger seat: unsuspended, adjustable Assistance Systems - ESP - ASR - Cruise control ACC Stop & Go - Emergency braking assistant EBA - Lane departure warning LDW - Lane change assist LCS and turn assist - Attention warning MAN AttentionGuard - Front detection - Traffic sign recognition Nwjdpfxjy Rvyno Ag Ion - Reversing motion system Interfaces - 2-line trailer brake coupling - 15-pin trailer socket - ABS socket - Body power supply interface - FMS interface - PTO gearbox-dependent type NH4c Paintwork - Cab finish: RAL 5002 ultramarine blue - Door extension and doorstep finish - Fender finish - Bumper finish ----- WIESE Body for Aerial Platform and Construction Machinery Transport Body dimensions - Length: approx. 9,050 mm, usable length up to the toolbox in front of the bulkhead approx. 8,770 mm - Width: approx. 2,550 mm - Loading height: approx. 1,050 mm unladen Substructure - Steel welded construction, weight-optimized - Longitudinal and crossmembers from laser-cut special profiles - Short crossmember spacing for high point loads - Rear inclined for low ramp angle - 90° outer frame profile with lashing points for tie-down straps Bulkhead & Floor - Reinforced bulkhead, 200 mm below cab

Condition: used, Year of construction: 2011, total length: 2,000 mm, Warehouse technology Dulevo Kehrmaschine 90 BK Nwedpfx Aozcztpjg Isn Drive Gas Year built 2011

Condition: used, Year of construction: 2007, operating hours: 15,000 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, table length: 4,500 mm, table width: 2,000 mm, tank capacity: 8,000 l, pressure: 4,150 bar, operating pressure: 3,800 bar, input current: 84 A, power: 45 kW (61.18 HP), Waterjet cutting system CMS Tecnocut IDRA (predecessor to the Idroline series) 2 x 5-axis cutting heads (only 1 head is fully operational / head 2 is functional but lacks high-pressure/sand feed) Cutting head configuration as a 2D head with a 250 mm Z-axis travel range Cutting head configuration as a 3D head with a 150 mm Z-axis travel range, A-axis travel range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control, not 2.5D like many other machines Cutting area: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 250 / 150 mm A-axis: +/- 274 degrees B-axis: +/- 62 degrees Details: - 5-axis cutting head with IKC technology (intelligent cutting head control for angle error compensation) - Anti-collision/height sensor for surface scanning Nedpfxjzbz Evo Ag Iswn - DDX EasyStone Premium software - 60 HP/45 kW Jetpower EVO pump (3-cylinder) with an output of up to 5 L/min / Maximum pressure 4150 bar / Normal operating pressure 3800 bar The machine is still in operation and connected to power until July 31, 2026.

Condition: used, Year of construction: 2008, functionality: fully functional, 1 OPS INGERSOLL Gantry Eagle 800 wire erosion machine with IMC5 handling system, manufactured in 2008. Nwodpoy Ifu Nofx Ag Ien In very good condition and in operation until December 2025. Now dismantled. Includes 1 M.T.A TAE EVO M10 cooling unit (manufactured in 2012). 1 Kraft & Bauer FB703 fire extinguishing system. Weight approx. 6,700 kg. Available for sale at a favorable price. Price significantly reduced!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 2,240 mm, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 800 mm, TECHNICAL DETAILS Cutting length: 5,300 mm Cutting height: 2,100 / 2,240 mm Cutting depth: 800 mm Saw blade diameter: 303 mm Dust extraction port diameter: 120 mm MACHINE DETAILS Motor power: 5.5 kW Total connected load: 5.5 kW Dimensions & Weight Footprint: 6,300 mm x 1,250 mm x 2,720 mm Nwodpfx Aezktngeg Ion Weight: 1,200 kg EQUIPMENT Digital display in the Y-axis Center support Free-standing installation Folding slat grid Wooden back panel

Condition: not inspected (used), functionality: unexamined, Year of construction: 2019, operating hours: 3,446 h, load capacity: 2,000 kg, lifting height: 3,140 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 03/2027, Equipment: UVV, Service + UVV until 03/2027, Battery 19/2022 No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lift height: 3,140 mm Fork length: 1,800 mm Free lift: 1,519 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 3,446 h Drive type: Electric Battery: 19/2022 48V 750A, 49.6V (very good performance!) Mast type: Duplex Nwsdpfx Aeyzfx Ujg Isn Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,121 mm Weight: 3,500 kg EQUIPMENT Former Linde full-service unit Valve side shifter Duplex mast with full free lift All measurements are approximate. No liability for typing or measurement errors. COLLECTION TERMS Side loading up to 5 t possible onsite with a large forklift at buyer's own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment, Monday to Friday 7:00–16:30. A mast that is too high for transport can be dismantled upon request. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged (outstanding payment must be settled before collection).

Condition: good (used), Year of construction: 2000, operating hours: 53,776 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotary table diameter: 500 mm, rotational speed (max.): 18,000 rpm, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 2000 Control: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 slots Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be arranged Europe-wide at an additional cost upon request. Prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your equipment? For further information or contact options, please visit our website. Nodpowxd Agefx Ag Iswn

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Nwedpfx Aozawizsg Ion Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab & Comfort* Cab: TG3 Future Powertrain Platform GX: Maximum size (wide, long, extra-high), comfort suspension, electrically operated glass sunroof, roof spoiler, and side flaps with aerodynamic extensions. * Seats: Premium driver's seat package (air-suspended, seat heating, lumbar support, shoulder adjustment, armrests), Vario co-driver's seat (rotatable, foldable, non-suspended, armrests). * Sleeping Area: Two beds (comfortable mattress 110 mm at the bottom, standard mattress 90 mm at the top), slatted base, storage compartments, reading lights, sockets. * Air Conditioning: Electric auxiliary air conditioning system, Climatronic, water auxiliary heater (4 kW), permanent ventilation with overpressure to prevent dust ingress. * Interior: Dark Moon Grey color scheme with silver and chrome accents, carpet on the engine tunnel, numerous storage compartments, refrigerator, waste bin, sockets (12V, 24V, 230V, USB). Nwjdpfxszd Ni He Ag Ion ----Safety & Assistance Systems* Driver Assistance: Electronic Stability Program (ESP), Anti-Slip Regulation (ASR), Adaptive Cruise Control (ACC) Stop and Go, Emergency Brake Assist (EBA) Plus, Lane Departure Warning System (LDW), Cornering Assistant, Attention Guard, Traffic Sign Recognition, Reversing Motion System, Distance Warning System, Intelligent Speed Assistant (ISA), Driver Drowsiness Detection, Collision Warning System for Pedestrians and Cyclists. * Brakes: Electronic Braking System (EBS), ABS, Full Brake Assist, High-Performance Engine Brake (CRB), Retarder Eco, disc brakes front and rear, electronic parking brake, EasyStart hill start assist. * Lights & Visibility: LED Package Plus (headlights, fog lights, cornering lights), High Beam Assistant, automatic headlight activation, LED taillights, side marker lights, work lights, digital mirror replacement system MAN OptiView (heated, curb mirror, front mirror). ----Drivetrain & Chassis* Engine: MAN D3066 LF11, 12.7 l, 382 kW (520 hp), 2,650 Nm, Euro 6e, Common Rail, various filters and protection functions. * Transmission: MAN TipMatic 14.33 with retarder, various driving programs (Efficiency Plus, Manoeuvre, Idle Speed Driving), heat exchanger, reinforced single-plate clutch. * Axles & Suspension: 4x2, front axle 7,500 kg (leaf suspension, parabolic, 1-leaf, steel), rear axle 13,000 kg (air suspension), rear axle differential lock, stabilizers, shock absorbers, four-link suspension. * Tires & Rims: Continental tires (front axle 385/55R22.5, rear axle 315/70R22.5), Alcoa Dura-Bright EVO rims, tire pressure monitoring system with temperature display. ----Electrical System & On-Board Power Supply* Batteries: 2 x 12V, 210 Ah AGM, maintenance-free, electrical main battery switch, fuse box, comfortable external starting capability. * Generator: 28 V, 180 A, 5,000 W. ----Infotainment & Connectivity* Systems: MAN Media System Professional Navigation (12.3 inches), Advanced sound system with subwoofer, smartphone integration, online traffic information, connectivity board module, integration of MAN apps. * Controls: Multifunction steering wheel (leather, height and tilt adjustable), MAN SmartSelect with touchpad, Professional instrument panel (12.3 inches). ----Superstructure & Interfaces* Saddle Coupling: JOST JSK 42 K0, 2 inches, automatic lubrication, slide bearing, various electrical and pneumatic connections for the semi-trailer. * Tanks: 1100 l diesel (690 l left, 410 l right, aluminum), 165 l AdBlue (left, aluminum with plastic inner coating), lockable tank closures. --

Condition: used, Year of construction: 2008, For sale is a vertical CNC machining center, MAZAK VCN-510C-II, manufactured in 2008. The machine comes from an industrial facility and is offered including the accessories and tool holders shown in the pictures. Technical data: Manufacturer: MAZAK / Yamazaki Mazak Model: Vertical Center Nexus VCN-510C-II Year of manufacture: 2008 Serial/Part No.: C22U5630050 Control: Mazatrol Matrix Nexus Travel distances X/Y/Z: approx. 1,050 / 510 / 510 mm Table size: approx. 1,300 × 550 mm Tool magazine: 30 positions Spindle speed: up to approx. 12,000 rpm Tool holder: SK40 Power supply: 3-phase, 400 V / 50 Hz Nsdjz D Dg Dopfx Ag Ijwn Control circuit: AC 100 V / DC 24 V Rated connected power according to the nameplate: 33.1 kVA Weight: approx. 7,100 kg Dimensions: approx. 2,750 × 2,800 × 3,800 mm (W × H × L) Various tool holders and other accessories shown in the photos are included. Please refer to the pictures to determine the scope and exact assignment of the accessories, or check during an inspection. The machine shows signs of wear and tear due to age and use. Inspection is possible by arrangement. Loading, transport, and disassembly must be coordinated with the buyer in advance. Sale preferably to commercial enterprises. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has seen only a few hours of operation. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamps; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. opening) Material thickness: Nedpfxez In Ugj Ag Iewn Z = 8 to 70 mm Max. contour milling dimension in X-direction without clamping: X = 1500 mm Max. contour milling dimension in Y-direction: Y = 985 mm, less milling cutter radius Max. drilling dimension horizontally in X-direction: H = 1168 mm Z-axis stroke: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling spindle 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearing (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic, max. Ø tool: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y directions, only for special bevel gear 7869 with HSK holder Vertical spindles can be activated individually Arrangement in L-shape, 5 in X and 4(5) in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: alternating right/left n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - parallel seat 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Holder: M 10 thread, parallel seat 11 mm Total drill length max. 63 mm from mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis “CLAMEX” tool set - Incl. original tool set consisting of 2 pcs. P-system slot milling cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling arbor for P-system slot milling cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling arbor for P-system slot milling cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P, L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) 1 pc. Collet DIN 6388 form B, double slit, size 25 Clamping diameter 20, for HSK-F 63 holders

Condition: used, mileage: 25,900 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Mercedes Benz Arocs 3251 suction excavator * 2 units in stock * First registration: 01-2023 * Suction excavator MTS Dino 12 * Stainless steel cladding * Hydrostatic drive for suction, driving, and steering * Power boom EVO Power ARM Gen2 * 2 x turbine * Turbine operating hours: 1,058 h * Compressor operating hours: 943 h * DINO 12m³ container Nwedpfxsz I Ic Ds Ag Ijn * Stainless steel lining, complete * Power boom EVO-POWER ARM GEN2 * Rotating suction pipe system IKE/PERFOR * Hydrostat-RPM15 * Full cladding DESIGN * High-pressure water system 30 l/min * Biodegradable hydraulic oil * Aluminum fenders * Storage box made of stainless steel on the frame * Container with 2 pneumatic vibrators * Ladder under the hose rack * Light package I: 3 LED lights on the vehicle frame * Light package II: 2 LED lights on the central joint of the power boom * Light package III: LED light strips in the toolbox * Light package IV: Cable reel * Light package VIII: Light bar on the rear * 4 flashing beacons (switchable on the rear) * Anti-slip coating on the lid * Ball-head trailer coupling 3.5t * More pictures and videos via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, mileage: 34,073 km, power: 353 kW (479.95 HP), first registration: 03/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 18.480 LL SA, full air suspension, ADR compliant, 2-line tipping hydraulics Njdpfx Agez Dzbxs Iown First registration: March 2025 Mileage: 34,073 km Hazardous goods equipment according to ADR Type EXIII (EXII, FL, AT) Unladen weight: only 7,272 kg High-roof cab TM with 1 sleeper berth, cab air suspension, Premium driver's seat package, multi-function leather steering wheel, professional combined instrument panel 12.3 inches (the large one), water auxiliary heater/parking heater, Climatronic air conditioning, 220-volt connection, MAN sound system, MAN truck navigation, STABO CB radio, side window wind deflectors, LightFix roof lamp bar chrome with 2x triple LED spotlights, illuminated MAN lettering and illuminated lion, Air suspension front axle Air suspension rear axle VASC height adjustment Wheelbase 3,600 mm AGM batteries 210Ah Aluminum diesel tank 390 L Ad-Blue tank 60 L MAN TipMatic 12-speed 12.26 DD, gearbox function EfficientRoll, idle speed driving, Efficiency Plus, Performance and Manoeuvre (shunting mode) RETARDER + high-performance engine brake EVBec Lighting: full LED Tires: front axle 385/65 R 22.5 Rear axle 315/80 R 22.5 ALCOA aluminum rims Dura-Bright EVO high-gloss 2-line tipping hydraulics, switchable high-pressure/low-pressure system, pivoting arms in front of the fifth wheel Full safety package Light and Visibility Plus, full brake assistant, digital axle load display, light sensor, rain sensor, door window safety glass, electronically controlled steering system MAN ComfortSteering, driver airbag, ESP, ASR, distance cruise control with stop-and-go function, emergency brake assist EBA Plus, lane keeping assistant LRA, lane change assist LCS and turning assist, MAN AttentionGuard, traffic sign recognition, RENTING is the new BUYING; immediately available with our full-service rental.

Operating hours: 12,087 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,760 mm Free lift: available Mast type: Triple mast Fork length: 1,600 mm Hydraulically adjustable forks: available Side shifter: available Hydraulic valves: 3rd and 4th valve Number of wheels: 4 MACHINE DETAILS Manufacturer: Linde Type: E25L EVO Year of manufacture: 2018 Drive type: Electric Operating hours: 12,087 h Battery: 80 V / 575 Ah Battery year of manufacture: Battery voltage at rest: 84.3 V Self-weight: 4,800 kg Overall length: 4,100 mm Overall width: 1,150 mm Overall height: 2,176 mm Service valid until: UVV (German accident prevention regulations) valid until: EQUIPMENT Full cabin Heater Windshield wiper Fork positioner Nwedpfx Aoz R Dvmog Ion Side shifter Tilt angle display Facelift model All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified period, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 102

Condition: used, Year of construction: 2005, Filling machine for the production of mineral water or carbonated beverages in PET bottles. Manufacturer: LINNEA-ZEVOS Chotebor Nodpfjzwpbpex Ag Iown Model: AQUAFILL 40/60/12 Capacity: 9,000 bottles per hour (1.5 L and 0.5 L) Year of manufacture: 2005 Includes accessories for 1.5 L and 0.5 L bottles. Caps: PCO 1881 Used machine, in good working order, regularly serviced.

Condition: good (used), Approx. 15 units of 5-section wardrobe with bench, C+P – used: Price per unit: €500 (net), disassembled, packed, and loaded at the location! Manufacturer: C+P Möbelsysteme Type: S 3000 Evolo Year of manufacture: unknown Dimensions: H 1850 x W 1480 x D 500/815 mm with 150 mm high feet and pre-assembled bench, bench slats made of beech, with integrated height adjustment, 5 compartments, compartment width 300 mm, 5 shortened doors, Nsdpfx Ajzqzplsg Iewn suspension on pivot bolts, safety swivel lock for padlock with lock protection. Condition: good Available: immediately Location: Leipzig

Condition: like new (used), Year of construction: 2018, turning diameter over cross slide: 520 mm, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 110 mm, spindle speed (max.): 2,000 rpm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, bar passage: 110 mm, Equipment: documentation/manual, CNC LATHE COMEV PICODUE EVO 260×1500 – Year 2018 – Operational – Turin (TO) Flat-bed CNC lathe COMEV Picodue EVO, model 260×1500, year 2018 (serial number 8051), in good condition and fully operational. One-piece cast iron construction with induction-hardened and hand-scraped prismatic guideways. High-quality Italian manufacturing. Available for inspection and testing by appointment in Turin. Main technical specifications: • Max swing over bed: 520 mm • Max turning diameter: 260 mm • Max swing over carriage: 285 mm • Distance between centers: 1,500 mm Nodpfjy A Typex Ag Ijwn • Spindle bore: Ø 110 mm • Spindle nose: Cam Lock 8" (A2-8") • Spindle speed: 0 – 2,000 rpm (stepless) • Motor power: 12.5 kW (16.8 kW peak) • Rapid traverse X / Z: 10 / 10 m/min • Precision ground and preloaded ballscrews: ISO 5 – zero backlash • RAPID Original quick-change turret – 4 positions • CNC control: Z32 Delectron / COMEV • 15" color touchscreen display • ISO / conversational / teach-in programming • Connectivity: USB – network – remote diagnostics • 2 controlled axes: X – Z • CE compliant | Year: 2018 Machine available for inspection and testing by appointment.