Used Clip Electronics Measuring Amplifier for sale (14,193)

Condition: used, Nikon Model: VMZ-R3020 XYZ travel distances: 300 x 200 x 200 mm *Type TZ with low magnification objective: 250 x 200 x 200 mm Display resolution 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm Hnsdpfxjyiy Hbj Aa Esp EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Monochrome / Color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1),3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Episcopic, transmitted and 8-segment ring illumination with 3 incidence angles *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, darkfield; right objective lens: episcopic, transmitted light, darkfield Type A: Episcopic, transmitted and 8-segment ring illumination with 1 incidence angle *white LED Power supply, power consumption AC100V-240V, 50/60 Hz / 4A – 2A Dimensions & weight Main unit with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Installation footprint (W x D)4): 2700 x 2400 mm Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors. All information is non-binding!) We are happy to answer further questions for you by phone.

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine Hnsdpsvvudksfx Aa Esp The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard The following software modules are included: Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program 3D software • Metrosoft CM 3.8

Condition: excellent (used), Year of construction: 2021, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision industrial 3D measuring and inspection system designed for series production and process control on the shop floor. The Equator 500 is not a traditional coordinate measuring machine (CMM), but a comparative measurement system developed specifically for fast, repeatable measurements directly in the production environment. It is ideal for mass production, in-process measurements, and automated inspection routines. The unit is perfectly suited for checking dimensional accuracy, geometric tolerances, and position tolerances of workpieces, and can provide feedback to CNC machines. The software loads correctly, system status as per display: "Started OK" (see photos). Features & Application Areas: - 3D measurement of workpieces - Comparative measurement principle (very fast inspection cycles) - High repeatability in the micrometer range - Real-time temperature compensation - Suitable for shopfloor use - Automation ready (e.g. robot loading) - Ideal for series production, spot-checks, and process control Typical Industries: - CNC manufacturing Hsdpfxozix Nms Aa Ejnp - Metalworking - Automotive / supplier industry - Mechanical and tool engineering Technical Data (manufacturer information / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: approx. Ø 500 mm Z: approx. 150 mm Measurement principle: Comparative coordinate measurement technology Temperature-compensated measurement Accuracy: Very high repeat accuracy Measurement accuracy in the micrometer range (depending on application and strategy) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical Data: Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power requirement: approx. 1 kW Dimensions (approx.) Total height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.): 130 kg Condition: used Scope of delivery: (see photos) - Renishaw Equator™ 500 measuring system - Controller / industrial PC - Monitor - Keyboard and mouse - Base frame - Accessories as shown in the photos (Subject to technical modifications and errors. All data provided without liability!) For further questions, we are happy to assist you over the phone.

Year of construction: 2005, condition: used, Board measurement Hnsdpfxehlcvbe Aa Eep Shell measurement/Dimensional check of the shell

Condition: new, Year of construction: 2026, Zero mistakes, zero waste, and higher productivity! We thought SalvaStop_100 as a fundamental component to give your work an edge. Through numerical control, this electronic stop manages the push, stop and positioning of the profiles to be cut, regardless of the material. So you can reduce human errors, avoid waste and decrease labor costs. Hsdpfxokzhb Us Aa Esnp SalvaStop_100 is integrated with exclusive software that is easy to use thanks to an immediate, easily understandable and complete graphic interface. You can have the SalvaStop stop alone or combined with one of our Legend crosscutting saws to improve performance, work in complete safety and minimize human error.

Condition: used, Shimadzu Type: AG-X plus 20kN-50kN +750mm Dimensions: W 1206 x D 765 x H 2920 mm Technical specifications: Fmax: 50 kN Speed: 0.00005~1500 mm/min Accuracy: ±0.1 % JIS B7742 Class 0.5, ASTM E2658 Class A Crosshead-table distance (mm)(tensile stroke)*3: 215 to 1940 (20 kN: 0 to 1535 mm, 50 kN: 0 to 1475 mm) Possible test width: 600 mm Hedpfx Ajzimkfja Esnp Frame stiffness: 180 kN/mm 710 kg 200 V 4.5kVA/15 A + Accessories as shown Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors!) If you have further questions, we will be happy to answer them by phone.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Hexagon Metrology Optiv Classic 432 coordinate measuring machine in good, fully functional condition. Measuring range (single sensor): 400x300x200mm Hodpfx Asx H T Emja Eenp Dimensions: 1232x910x1663mm Weight: approx. 800kg Maximum workpiece weight: glass plate approx. 30kg Accuracy: MPEE = 2.9 + L/100 [μm] No additional software included. A PC is provided, but it is unknown to what extent the PC-DMIS 2020 R1 software can still be used.

Condition: excellent (used), Year of construction: 2020, Very well-maintained measuring system from Keyence. Type: XM-M1200 (XM-C1000) with PC XM-1500 Year of manufacture: approx. 2020 Hsdexgq Amspfx Aa Esnp #8385

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Keyence XM-T2000 coordinate measuring system from 2021, in excellent and fully functional condition. Keyence XMM-1600 controller included. Additional accessories: Keyence case, dongle, user manual, and certificates. Measuring range: 300 mm × 250 mm × 150 mm Smallest display unit: Distance: 1 μm, Angle: 0.0001 degrees Measuring accuracy: Repeatability: ±3 μm, Measurement deviation: ±8 μm Maximum load capacity: 25 kg #8406 Hodpfxex H T H Ds Aa Ejnp

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hnjdpfx Ajw Ah Axoa Ejp Hard Drive 500 GB (including 80 GB reserve capacity) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency

Condition: excellent (used), Fries Research & Technology Device Designation: FRT MicroProf® MPR 1250 The FRT MicroProf® MPR 1250 is a high-precision surface metrology system from the MicroProf® series by Fries Research & Technology GmbH (FRT). These systems are designed for non-destructive and contactless analysis of surface parameters such as topography, roughness, layer thickness, and more. Features of the FRT MicroProf: Device Details: Model: FRT MicroProf® MPR 1250 Item Number: 200 00 Sensor Type: CWL 300 µm Serial Number: 0904001 Measurement Principle: Chromatic confocal point sensor Light Source: Halogen lamp, white light Vertical resolution: up to 3 nm Measurement accuracy (Z): 100 nm Lateral resolution (XY): 2.5 µm Measurement angle to surface: 90° ±30° Max. sample size: approx. 310 x 310 x 50 mm Technical Data (Excerpt): XY-Stage: Type: Compact XY-cross table Travel (measurement range): 200 x 200 mm Guidance: mechanical cross roller guide Drive: DC motor with ball screw Position feedback system: Heidenhain glass scale with reference mark System resolution: 0.2 µm Repeatability: < ±1 µm Hnsdjzii Rujpfx Aa Eep Orthogonality XY: < 4 µm / 200 mm Vertical runout (per axis): < 2 µm / 200 mm Z-Axis (motorized): Type: Linear axis Travel: 50 mm (optional 100 mm) Drive: Stepper motor with spindle drive Lateral runout: < 2 µm / 50 mm Manual Coarse Adjustment (optional): Type: Dovetail guide Adjustment range: up to 300 mm sample height Measurement: Minimum point spacing (XY): 0.6 µm Sample size: approx. 310 x 310 x 50 mm Max. sample weight: 5 kg (optional 10 kg) Measuring speed: 1 µm/s up to max. 100 mm/s System: Total weight: approx. 275 kg (measurement setup: 225 kg) Footprint (measurement setup): approx. 0.9 x 0.8 m Dimensions control unit (W x D x H): approx. 0.55 x 0.53 x 0.32 m Power supply (EU/US): 110–240 V, 50–60 Hz, 16 A Power consumption: approx. 300–400 W Operating Conditions: Temperature range: 22 °C ±5 °C Temperature stability: < 0.5 °C Weight approx. 500 kg Condition: The device is in very good technical and cosmetic condition. All axes move precisely and smoothly. Scope of Delivery: MicroProf® MPR200 00 XY measuring system Control unit Connection cables (Subject to technical modifications and errors. All information without obligation!) Inspection and onsite testing available by appointment. For further questions, feel free to contact us by phone.

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces Hodpfx Ajzii Dzoa Esnp - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: excellent (used), Mitutoyo Model: QV-L404Z1L-D Item Description: For sale is a CNC vision measuring machine from the renowned manufacturer MITUTOYO. This is the Quick Vision Active 404 model. The device is ideal for precise optical measurements in production, quality assurance, and research. Hsdpszii Duefx Aa Esnp Technical Data: Brand / Type: Mitutoyo QV-L404Z1L-D (Quick Vision Active 404) Measuring range (X / Y / Z): 400 × 400 × 200 mm Camera: CMOS color camera Software: Mitutoyo QVPAK QVPAK (R) Version: 13.301.0075 Optics: Zoom lens, LED illumination system Worktable: High-precision glass stage Equipment: Control PC with QVPAK measuring software 2 × 22" TFT monitors Keyboard & mouse Control panel Swivel office chair for comfortable operation Scope of delivery: Mitutoyo Quick Vision Active 404 measuring device Control PC with QVPAK 2× TFT monitors (22") Keyboard, mouse Control panel Swivel office chair Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors reserved!) Further questions can gladly be answered by phone.

Condition: excellent (used), Year of construction: 2020, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Professional handheld measurement system for precise 3D measurements directly in production environments. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a dedicated measuring room, complex setup, or special CMM expertise. The device is ideally suited for manufacturing operations, quality assurance, initial sample inspection reports (ISIR/PPAP), in-process controls, as well as for reverse engineering. Technical Data – KEYENCE XM-C1000 / XM-H1000 (XM Series) Measuring System (General) Specification: Measurement range (XYZ): approx. 600 × 300 × 200 mm (depending on setup) Measurement accuracy: ±(8 + L/80) µm (L = measured length in mm) Hnedpfxjzii Dno Aa Eop Repeatability: ±3 µm (typical) Resolution: 1 µm Measuring principle: Optical tracking with camera-based detection Calibration: User calibration with calibration sphere possible CAD Comparison: Directly on the device (STEP, IGES, etc.) Export formats: PDF, Excel, CSV, DXF Tolerance analysis: Automatic with color mapping XM-C1000 – Control and Evaluation Unit (Controller) Component: Display: 15” touchscreen Connections: USB, LAN, HDMI, power Storage options: Internal + USB export Software functions: Measurement, CAD comparison, report generation Operation: Touchscreen + pushbutton operation Languages: Multilingual (including German) XM-H1000 – Handheld Probe Specification: Probe type: Handheld with pressure button Feedback: LED status indicator, vibration signal Probe tip: Interchangeable, various tips available Tracking: Detected via controller’s camera system System Characteristics Specification: Operating temperature: 10 – 35 °C Power supply: 100–240 V AC, 50/60 Hz System dimensions (complete): approx. 800 × 600 × 800 mm (depending on setup) Total system weight: approx. 25–40 kg (depending on configuration) Mounting: On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld probe XM-C1000 (Controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & Delivery: Shipping via freight forwarding Collection by appointment possible. International shipping available on request. If you have any questions, need further information or wish to arrange a viewing appointment, please feel free to contact us. (Subject to changes and errors in the technical data and information!) We are also happy to answer any further questions by phone.

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Hnsdszii Dhepfx Aa Eop Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: used, Nirox Sensor Nirox multi-Thick-MS1-CH1 Nirox multi-Thick-MS1-CH1 – Sensor for Multi-Layer Thickness Measurement For sale is a high-quality optical sensor of the type Nirox multi-Thick-MS1-CH1, designed for precise, non-contact measurement of multi-layer materials such as plastic films, composites, or coated substrates. This sensor system is ideally suited for quality control in the plastics or packaging industries. Technical highlights: Model: multi-Thick-MS1-CH1 Manufacturer: Nirox s.r.l. (Italy) Function: Optical precision sensor for micrometer-accurate layer thickness measurement Measuring method: A-Scan / optical interference analysis Channel: 1 (CH1) Fields of application: Inline measurement in production lines or for laboratory use Typical materials: Multi-layer films, coated glass, technical laminates Condition: used Scope of delivery: (see image) Sensor multi-Thick-MS1-CH1 Connection cable (Subject to changes and errors in technical data. All information is provided without guarantee!) If you have any further questions, we are happy to assist you by phone. Hjdoziiw Uopfx Aa Eonp

Condition: used, Dr. Wiesner Type: INTEGRA DDV -1...1 bar Item Description: Dr. Wiesner Integra leak testing system The classic – for all common testing methods The leak testing system for industrial leak and flow tests with a fully graphic color display up to three independent test circuits can be operated 255 test programs can be stored Hnsdpfoziiv Dox Aa Ejp automatic process optimization autoTune (option) Communication via flexibly interchangeable bus coupling modules freely programmable fixture control freely programmable special test sequences The device is suitable for tests using the relative and differential pressure methods with overpressure. Special versions: none Technical data: Electrical supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) Pneumatic: clean and dry compressed air max. 7 bar (to connection P) Pressure range: 0 ... 1000 mbar, electronically controlled Measuring ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Electrical interfaces: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) Pneumatic: Connection for test object (Test) Connection for reference circuit (Ref.) Housing Degree of protection: IP40 Dimensions: 450x185x380mm (WxHxD) Weight approx. 15.5kg Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, This listing is for a Mitutoyo 202TP Vision Measuring System The unit is in full working condition and is ready for immediate release Hsdpfx Ajxzgtdea Ejnp The Mitutoyo 202TP Vision Measuring System is a vision measuring machine — a type of optical metrology system that uses high‑resolution imaging and software to measure the dimensions of parts without physical contact. These systems are widely used for precision inspection of components in industries like automotive, electronics, medical devices and precision engineering. Vision measuring systems eliminate many of the errors and limitations of manual microscope measurements by combining controlled lighting, high‑resolution cameras, automatic edge detection, and computer analysis to deliver accurate and repeatable measurements

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo VAST GOLD Year of manufacture: 2000 Retrofit 2024, last calibration 01/2025 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor Automatic probe changer magazine, 12-position Probe changing system, 20 positions Probe accessories Calibration sphere Reference probe HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software QS-Stat option Calypso upgrade and other options possible Further accessories and options available Available for immediate delivery Hsdpozk Id Aofx Aa Esnp

Condition: reconditioned (used), Year of construction: 2026, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 Multisensor Measuring System equipped with camera, laser, Renishaw probing system, and Hexagon Vision 3D software (upgrade to Windows 11 and OptiCheck3D 2025 possible) Hjdpfoxufk Uox Aa Eonp Complete maintenance history available Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Delivery via factory service or forwarding agent, worldwide. Online or optional on-site demonstrations with customer parts, application-specific consultation by accredited Profitech metrology laboratories during project planning. Comprehensive service: – Delivery, installation, commissioning, accuracy verification to standard, certification, and extensive acceptance documentation. Individual training and education programs also available as online courses. Rental, hire-purchase, or financing available directly through Profitech without a financial institution. Measuring system can be individually configured to customer requirements. Measuring range for all sensors: 400x400x200 mm Dimensions: 800x1000x2000 mm Weight: approx. 800 kg Maximum load (glass plate): 30 kg Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measuring length in mm) Max. traverse speed: 250 mm/s Including camera Including rotary table Including laser Including LED ring light Including new frame grabber Including dual-monitor operation Including CNC control and PC Including Hexagon Vision3D software

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, warranty duration: 6 months, Shining 3D FreeScan Combo – Metrology System / 3D Scanner We are offering a new Shining 3D FreeScan Combo unit manufactured in 2023. Hjdpjzk E D Tsfx Aa Eenp The device has only been demonstrated to customers on a few occasions. Aside from that, it is in like-new condition, fully functional, and ready for use. The scanner is covered by a 6-month seller's warranty. For any questions or additional information, please contact us via message or phone.

Condition: good (used), Year of construction: 2010, 2010 Mitutoyo Crysta-Apex C574 High-Accuracy, 3D CNC Coordinate Measuring Machine Serial number: 80461121; Measuring range (X x Y x Z): 500 mm x 700 mm x 400 mm; Table size: 1160 mm L x 638 mm W; Maximum Workpiece Height: 180 kg; Maximum Workpiece Height: 545 mm; Drive Speed: Up to 520 mm/s; Acceleration: 0.17 G (1,667 mm/s²); Linear Encoder Resolution: 0.1 μm (0.0001 mm); Accuracy: MPE (Maximum Permissible Error) typically ranges from E₀ = (1.7 + 3L/1000) μm; Equipped Reinshaw TP 200 compact module-changing probe; Principal application: DCC CMM where high accuracy is required; Sense directions: 6-axis (±X, ±Y, ±Z); Unidirectional repeatability (2σ µm): Trigger level 1: 0.40 μm (0.000016 in), Trigger level 2: 0.50 μm (0.00002 in); XY (2D) form measurement deviation: Trigger level 1: ±0.80 μm (0.000032 in), Trigger level 2: ±0.90 μm (0.000036 in); XYZ (3D) form measurement deviation: Trigger level 1: ±1.00 μm (0.00004 in), Trigger level 2: ±1.40 μm (0.000056 in); Repeatability of stylus change: With SCR200: ±0.50 μm (0.00002 in) maximum, Manual: ±1.00 μm (0.00004 in) maximum; Trigger force (at stylus tip): XY plane (all modules): 0.02 N, Z-axis (all modules): 0.07 N; Overtravel force (at 0.50 mm displacement): XY plane (SF/EO module): 0.2 to 0.4 N, XY plane (LF module): 0.1 to 0.15 N, Z-axis (SF/EO module): 4.90 N, Z-axis (LF module): 1.60 N; Weight (probe sensor and module): 22 g (0.78 oz); Maximum extension (when mounted on a PH10 PLUS series head): 300 mm (11.81 in); Maximum recommended stylus length (M2 styli range): SF/EO module: 50 mm steel to 100 mm GF, LF module: 20 mm steel to 50 mm GF; Mounting method: M8 thread; Suitable interface: PI 200-3, UCC; Stylus module changing rack: SCR200; Stylus range: M2; Equipped with Reinshaw SCR200 stylus change rack; Weight: 0.75 kg; Mounting orientation: Vertical or horizontal; Mounting fixture: Single stud (M8, M10); Number of ports: 6; Repeatability of stylus change (2σ) at 50 mm: Automatic ≤ 1 μm, Manual ≤ 2 μm; Entry speed: Unrestricted; Module pull-off force: 800 g maximum; Overtravel protection: Electromechanical (minimum deflection: 5); LED indicators: Power: Green, Status: Red (flashing during probe inhibit); Change cycle detection: Optoelectronic beam system with Hall effect proximity sensor; Multi-rack usage: Up to two SCR200 units (12 ports) may be connected with a special cable; all needed documents will be provided in order to restart the machine Hedpfxjzk Dpzo Aa Esnp Machine Weight: 625 kg; Maxine Dimensions: 2200 mm L x 1500 mm W; Inv. Nr: 2077; Due to the dual-use classification of these instruments, all transactions involving them must be approved by Mitutoyo Japan; Mitutoyo can also provide transportation preparation, installation, and commissioning at the new location as a paid service. Optional loading services are available on site. Indicative price: 70 EUR, VAT not included;

Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, type plate available, We are offering this used Keyence VL-500 optical 3D coordinate measuring machine, manufactured in 2020. Manufacturer: Keyence Corporation Model: VL-500 Country of origin: Japan Year of manufacture: 2020 Serial number: CC910026 System consists of: Control unit: VL-500 Base/object table: VL-530 Measuring head: VL-570 Calibration plate Manuals Dongle PC Hnjdpfx Asy Uw Dvea Eop Last calibration performed by the manufacturer in 11/2024. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Krauss Maffei SE502 MC4 sequence controller- removed from KM 18 C3 - removed from running machine - fully functionalmanufacturer: Krauss Maffei type: SE502 Hedpfxjrr Eh As Aa Eenp spare part no.: 5 Dition: gebraucht

Condition: used, Krauss Maffei SR 500 processor card for MC3F- for MC3F sequence control - removed from running machine Hedpfx Ajrr Ehqja Eonp - fully functionalmanufacturer: Krauss Maffei type: SR500/310 spare part number: 5 Dition: gebraucht