Used Clean Laser Laser Cleaning Device for sale (18,776)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: MAX Photronic, laser source model: MFSC-6000, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 10 mm, pipe diameter (max.): 230 mm, pipe length (max.): 6,200 mm, working length: 3,050 mm, working width: 1,530 mm, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 330 mm, feed rate X-axis: 115 m/min, feed rate Y-axis: 115 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, overall weight: 6,030 kg, total length: 910,041 mm, total width: 4,100 mm, total height: 2,350 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Combination fiber laser cutting machine for sheet metal & tubes with pallet changer PG3015T6 – Full equipment - Working area for sheets: 3050x1530 mm - Working area for tubes: 15x15 / 230x230 mm & D15 / D230 mm - 6 kW MAX Photonics laser - Water chiller Hedpfeywwv Dsx Af Sju - Fume extraction unit - Automatic O2/N2 pressure regulation - Automatic focusing head - YASKAWA servo motors - Light curtain for loading table - Complete operator safety enclosure - CE conformity

Condition: used, Year of construction: 2000, length 800 mm Hedoz Ebp Eepfx Af Seu width 1250 mm height 1500 mm total power requirement 0 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 800 x 1250 x 1500 mm Device has 7 cross t-slots with 22 mm shaft width.

Condition: used, Year of construction: 2014, operating hours: 2,058 h, functionality: fully functional, machine/vehicle number: 103EH00230/02, fuel type: electric, empty load weight: 1,650 kg, total length: 2,200 mm, construction height: 1,500 mm, drive type: Elektro, construction width: 1,300 mm, Sweeper machine Chassis number: 103EH00230/02 Hedpfxoz D Nknj Af Ssu Condition: Ready for use and fully functional Technical condition: good

Condition: new, AVAILABLE FOR PURCHASE OR RENT Please read the technical specifications carefully. If the machine is a worthwhile investment for you, please provide your complete contact details, including a valid phone number and email address, so that we can prepare a quotation. Hsdpjru E Svofx Af Seu Fiber Laser 30W Marking area: 200 x 200 mm Workpiece size max: WxHxD: 550 x 450 x 350 mm Laser type: Fiber 30 Watt Wavelength: 1064 mm Marking speed max. 7000 mm/sec Motorized Z-axis, height: 700 mm Repeatability/lens: +/- 0.001 mm Line thickness min. approx. 0.01 mm Power supply: 240 V/50 Hz External dimensions: 110 x 80 x 200 cm Front door: manual Includes software and PC Can be inspected on-site while powered Price net, plus VAT

Condition: excellent (used), Audion Sealmaster Magneta 421 MG-2 Heat Sealer – 420 mm – 600 W Audion Elektro Sealmaster MAGNETA 421 MG-2 Impulse Heat Sealer. This device is suitable for sealing plastic bags and films and is designed for professional or commercial use. Data according to the nameplate: Model: Audion Sealmaster Magneta 421 MG-2 Year of manufacture: 2012 Sealing length: approx. 420 mm Seal width: approx. 3 mm Voltage: 230 V Frequency: 50/60 Hz Power: 600 W Serial number: 45/21968 with film cutter adjustable sealing time electromagnetic closing/holding function The device is in used condition with corresponding signs of wear, see photos. Hedpezuvl Aefx Af Seu The device has been tested and is functioning perfectly. Sealing, magnetic function, and cutter are working. Wear parts or replacement parts are still available from the manufacturer if necessary – making it also interesting for continued professional use.

Condition: as good as new (ex-display), Clean air filter Type: Power Unit 250 P FU Offer type: Demonstration machine Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Intake nozzle diameter: 250 mm Nominal volume flow: 3,534 m3/h Maximum volume flow: 4,900 m3/h Negative pressure at Vnenn: 3,184 Pa Filter area: 22.4 m2 Compressed air cleaning including integrated pre-separator including integrated extinguishing system including inverter for speed control including integrated sound insulation shroud (-4 dB(A)) Chip collection volume: 2 x 250 l Sound pressure level: 71 dB(A) including dust baffle Hedpfshfmpxsx Af Ssu Dimensions L x W x H = 3000 x 1058 x 2361 mm Weight 850 kg

Condition: good (used), functionality: fully functional, Year of construction: 2008, TRUMPF TruMatic 7000 – 1300 Year of manufacture: 2007 Includes active dies! Includes Sheetmaster and Gripmaster Hedpfoz Dumzex Af Seu Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Max. punching force: 220 kN Working area (laser operation): approx. 2540 x 1280 mm Working area: punching area: approx. 2540 x 1370 mm Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Technical Data: CNC Control: BYSTRONIC BySoft Laser Type: CO2 Working Area: 3000 x 1500 mm Hedpfx Ajz E Axuef Sju Travel Range X-Axis: 1562 mm Travel Range Y-Axis: 772 mm Travel Range Z-Axis: 100 mm Bylaser Power: 2.2 kW Wavelength: 10.6 µm Rapid Traverse X/Y/Z: 100 m/min Cutting Capacity Steel: 8 mm Cutting Capacity Stainless Steel: 6 mm Cutting Capacity Aluminum: 4 mm Fume Extraction System with Water Cooling: EF WKL 300-F CE Marking Dimensions (Length x Width x Height): approx. 13500 x 2500 x 2500 mm Weight: approx. 13.5 tons Condition: Very good condition Only 6,500 operating hours The machine comes from a vocational school, not from a production facility The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Used equipment – in very good condition Kugelmann Hsdezdt Nwopfx Af Ssu Articulating snowplow blade Type: B140/67 Blade height (H): 67cm Blade width (W): 140cm Clearing width at maximum inclination (W2): approx. 123cm Year of manufacture: 2020 Price upon request Subject to changes, typing errors, mistakes and prior sale. All information is provided without warranty. The sale is made with the exclusion of any warranty or guarantee.

Condition: used, Year of construction: 2015, Bystronic BySprint Fiber 4020 – Laser cutting machine - Bystronic ByVision CNC control system - 15" TFT-LCD operating panel - Operating hours: 25,076 h - Cutting hours: 10,728 h - Year of manufacture: 2015 Technical data - Laser source: Fiber laser - Laser power: 6000 W - Working area: 4064 × 2024 × 70 mm - X-axis travel: approx. 4000 mm - Y-axis travel: approx. 2000 mm Hodpez Da Iqjfx Af Ssu - Z-axis travel: 70 mm - Maximum sheet thickness steel: 25 mm - Maximum sheet thickness stainless steel: 30 mm - Maximum sheet thickness aluminum: 30 mm - Maximum sheet thickness copper: 12 mm - Maximum sheet thickness brass: 12 mm - Electrical connection value: 22.7 kVA - Machine dimensions WxHxD: 13700 x 2565 x 6670 mm - Machine weight: approx. 15,000 kg

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of cooling: water, degree of automation: automatic, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fridge, fume extraction, safety light barrier, We offer this ready for use Highcon BEAM 2 laser cutting machine, year of construction 2020. Hsdsy Dq E Sspfx Af Sou IN production, can be inspected on site. The price includes the chiller as well. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Hotrunner controlunit PSG 12 12 units 230 Volt price: 2.850 € contact: Mr. Rainer Eckerle Hjdpez Earlsfx Af Sou

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,000 h, machine/vehicle number: S1631C0399, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: TRUMPF, controller model: TruLaser Cell 8030, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 3000, laser hours: 8,000 h, laser power: 3,000 W, laser wavelength: 1,030 nm, TRUMPF TruLaser Cell 8030 – 3D Laser – 2017 – 3 kW TruDisk is one of the most advanced and efficient 3D laser cutting machines in the world, widely used in the automotive industry, especially for processing hot-formed stamped components, body parts, rocker panels, and B-pillars. The machine is equipped with a TRUMPF TruDisk 3000 fiber laser (3 kW), offering high cutting quality, process stability, and low operating costs. The system features a 5-axis motion system and a spacious, ergonomic working chamber. Technical Data: Hodoxxl A Eepfx Af Sju Manufacturer: TRUMPF Laser- und Systemtechnik GmbH (Germany) Model: TruLaser Cell 8030 Type: L60 Year of manufacture: 2017 Serial number: S1631C0399 Laser: TRUMPF TruDisk Laser type: solid-state fiber laser Laser power: 3000 W (3 kW) Wavelength: 1030 nm Operation: CNC Controller manufacturer: TRUMPF / Beckhoff Controller model: Beckhoff CX-Series (CX2030 / CX2040, TruControl system) Power supply: 400 V / 50 Hz Connected load: 45 kVA Protection: 3 × 100 A Media: electric + pneumatic (no hydraulics) Motion axes: 5-axis 3D machining Maximum cutting thickness: Mild steel: up to 6 mm Stainless steel: up to 4 mm Aluminium: up to 3 mm

Year of construction: 2026, condition: new, functionality: fully functional, usable tank capacity: 5 l, machine/vehicle number: GDI-ECO, Equipment: CE marking, TECHNOMAKS GDI-6000 The TECHNOMAKS GDI-6000 is a high-pressure injector test and cleaning device developed for performing testing, analysis, and professional cleaning operations on injectors used in gasoline direct injection systems. Thanks to its specially designed ergonomic body, aluminum test rail, and durable test chamber, it is suitable for professional service use. The device features 6 special test tubes, each with a capacity of 150 mg, that are resistant to different temperature conditions and have a flexible structure. With the GDI-6000, 1 to 6 injectors can be tested simultaneously. Thanks to its practical connection accessories, injectors can be quickly connected to the system. The special drip and spray observation chamber allows for detailed control of the injector's spray pattern, direction, and leakage. Each test operation can be completed within a maximum of 90 seconds. The device's specially developed electronic pressure measurement system can reach a maximum working pressure of 200 bar. Thanks to tests performed under high pressure, dripping and leakage problems in injectors can be observed more clearly. The integrated printer allows test results to be printed and presented to the customer or relevant organization. 6000+ INJECTOR DATABASE The GDI-6000 has a large database containing reference test values for more than 6000 injectors. The fuel quantity values that the injector should deliver can be viewed on the 7-inch touchscreen. NEW-ENJ+ MODE For injectors not found in the database, the user can create their own test parameters and save new injector information to the system. OHM TEST MODE Allows for the control of the electrical resistance values of the injectors. Thus, the OHM values of the injector coils can be measured during the test. AUTOMATIC TEST MODES AUTO-1: 4000 RPM low-speed test AUTO-2: 5000 RPM medium-speed test AUTO-3: 7000 RPM high-speed test By simulating different engine speeds, it enables the comparison of the fuel quantity and spray performance of injectors under various operating conditions. DRIP / LEAKAGE TEST Thanks to the Leaking Out mode, injectors are checked under high pressure. Leakage, dripping, and pressure loss problems in the injector nozzle can be observed. MANUAL TEST MODE RPM, PULSE, and TIMER values can be adjusted manually by the user. Thus, special test scenarios can be created using the desired speed, triggering time, and test time. Hjdpfsz D S Ezex Af Sju PROFESSIONAL CLEANING MODES CLEANING 1: Performs pressurized cleaning by operating the injectors at different speeds between 1000–7000 RPM. CLEANING 2: Increases the open time of the injectors, allowing for more intense pressurized cleaning to be applied to the fuel passage channels and injector nozzles. REVERSE FLUSHING: Using special reverse connection accessories, liquid is applied to the injector in the opposite direction. This method ensures that the injector shaft, nozzle, and internal fuel channels are professionally cleaned. ULTRASONIC CLEANING MODE: During the ultrasonic cleaning process, the injectors can be operated in a controlled manner in the 1000–7000 RPM range. In this way, the mechanical operation and ultrasonic cleaning can be performed simultaneously.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Hodpsz A D Irjfx Af Ssu Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: used, Year of construction: 2010, Laser cutting machine Manufacturer: Eurolaser Type: LCS XL-1600 Year of manufacture: 2010 Power: 200 W Hsdpfxoyvk R Eo Af Sju Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Previous application: Cutting of acrylic glass Laser source renewed in 2021 ä28926

Condition: used, Year of construction: 2015, CNC laser cutting system, fiber laser 3kW Manufacturer: Microstep Type: FIBERLAS MSF 4001.20BL Year of construction: 2015 With drilling unit + tool changer Hsdpfxjzhtp Ej Af Ssu Complete system consisting of: - Cutting system, - IPG fiber laser source, - HIGHYAG cutting head, and - KEMPER extraction system. Laser IPG Ytterblum Laser System YLS-3000-CUT-Y14 Rated power: 3,000 W (3kW) Operating mode: CW / modulated Power consumption: approx. 9 kW max. (8.3 kW typical) at 3,000 W IPG air-water chiller for cooling Operating hours: approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Focus diameter: approx. 300 µm with 200 µm optical fiber Weight: approx. 6.2 kg Extraction system KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER KemTex ePTFE membrane filter Testing: IFA-tested, welding fume class W3 (high-alloy steels) Availability from 10/2026 Reference No.: C2177 28926

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: MAX Photronic, laser source model: MFSC-6000, laser power: 6,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, pipe diameter (max.): 230 mm, pipe length (max.): 6,300 mm, feed rate Y-axis: 110 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, overall weight: 4,800 kg, total length: 9,250 mm, total width: 2,635 mm, total height: 2,350 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, Fiber laser tube cutting machine TH6020 – Fully equipped - Working range – tubes: 15x15/230x230mm & D15/D230mm - 6 kW MAX Photonics laser - Water chiller - Fume extraction unit - Automatic O2/N2 pressure regulation - Automatic focusing head - YASKAWA servo motors - Complete operator safety enclosure Hsdpsywxl Tefx Af Seu - CE conformity

Condition: used, Technical details: table length: - mm table width: - mm Hodpfjzuzr Iox Af Ssu table load: - t height: 1250 mm width: 1000 mm depth: 800 mm weight of the machine ca.: 1200 kg 2 units available (price per unit) According to DIN 650: 6 × T-slots When making your inquiry, please specify the number of clamping angles required. *

Condition: good (used), PLC controller, central assembly, working memory, CPU, central unit, central processing unit, compact unit -Manufacturer: Siemens, Simatic S5 compact device -Type: 6ES5 095-8MA03 -Number: 1 modules available -Price: per piece -Dimensions: 150/145/H135 mm -Weight: 1.2 kg/pc. Hedpoh A Sb Eefx Af Sju

Condition: used, Year of construction: 2001, functionality: fully functional, P3 foam cleaning system for rinsing and filling machines Pumps and valves Attached stainless steel cabinet with Siemens S7 control system Hjdpfoww Hnvox Af Seu Special price due to stock clearance: €4,200

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2013-5191, Ultrasonic cleaning system, less than 2 operating hours Hjdjxqnqpspfx Af Sou

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser power: 3,000 W, laser wavelength: 1,080 nm, punching diameter: 1 mm, stroke rate (min.): 60 1/min, stroke rate (max.): 65 1/min, working length: 3,000 mm, working width: 1,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 9 mm, sheet thickness brass (max.): 7 mm, sheet thickness copper (max.): 7 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,200 kg, total length: 3,100 mm, total width: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, The Digima F1530 3kW is an advanced open-type fiber laser cutting machine designed for precise sheet-metal processing in manufacturing plants, metalworking companies and modern fabrication workshops. It is intended for businesses that require high cutting quality, strong performance and stable, repeatable operation in every The Digima F1530 3kW is equipped with branded components that enhance durability and cutting performance. The machine includes a RAYCUS laser source, a Raytools AUTO FOCUS cutting head, a Raytools control system, a Schneider servo system, a Japanese Shimpo reducer, H-class linear rails and an industrial TONGFEI / S&A cooling system. The entire unit is built on a heavy-duty industrial steel frame that has been heat-treated for improved stability and long-term resistance to deformation. The machine also provides flexible use of assist gases, allowing the cutting process to be adapted to the material type and the expected edge quality. Oxygen at 1 MPa can be used for carbon steel, nitrogen at 2.5 MPa is intended for stainless steel and aluminium, and compressed air at 1.4–1.6 MPa offers a more economical option for thinner parts. This gives the user better control over cutting quality, process speed and operating costs. Hjdpfx Aszlr Syjf Sju As standard, the machine includes features that improve operator safety and protect key components. A laser-head cover helps protect the cutting head from dirt and mechanical damage, while safety barriers create an additional protective zone around the working area, improving safety during intensive production work. The Digima F1530 3kW is powered by a 3P 380 V / 50 Hz supply, and the machine itself weighs 2000 kg. It is a modern and efficient fiber laser cutter for companies looking for a solution that combines a large working area, high precision, fast operation and industrial-grade durability. This model is a strong choice wherever reliable production, high cutting quality and future production growth are important.

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: Hjdpfxjwx Aade Af Sou - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: good (used), functionality: fully functional, For sale: a Liftmaster for handling GF 1500x3000m sheet sizes. The machine is in storage and available immediately. Hsdpfxsz Hvkye Af Sou