Used Cincinnati Nc 320 for sale (7,476)

Condition: ready for operation (used), Year of construction: 2012, A Matec CNC machining center is offered. Travel X/Y: 3000mm/800mm, horizontal Z travel: 800mm, vertical Z travel: 700mm, B-axis: +/-105°, NC rotary table diameter: 800mm, rapid traverse: 30m/min, feed rate: 30m/min, spindle taper: SK40, max. spindle speed: 12000rpm, spindle power: 30kW, tool magazine: 60, operating hours (04.02.2026): 50106h, control system: Rexroth IndraMotion MTX with Siemens Operate. Machine dimensions X/Y/Z: approx. 7160mm/5400mm/3200mm, weight: approx. 15t. Expected to be available from the end of 2026. Documentation available. Inspection possible by prior arrangement. Ijdpfx Aozka Nqebnoif

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Isdpfexf Ikfsx Abnsif

Year of construction: 2003, condition: ready for operation (used), Swing diameter over bed/cross slide: 320mm/150mm, center height: 160mm, distance between centers: 750mm, max. turning length: 740mm, travel X/Z: 185mm/700mm, chuck diameter: 200mm, speed: 4000rpm, rapid traverse X/Z: 5m/10m/min, tool stations: 8, tailstock quill stroke: 120mm, tailstock quill diameter: 60mm, machine dimensions X/Y/Z: approx. 2300mm/1500mm/1700mm, weight: approx. 2000kg, control: Heidenhain. Documentation available. An on-site inspection is possible. Iodpszdum Djfx Abnoif

Condition: good (used), Year of construction: 2014, Clamping force: 50 t Screw diameter: 30 mm Isdszcaipepfx Abnjif Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Shot volume: 85 cm3 Shot weight: 77 g Injection pressure: 2000 bar Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2002, Arburg 320S 350-150 (2002) Clamping force: 35 ton Plate size: 455x455 mm Tie bar distance: 320x320 mm Iijdpfowmqx Rex Abnjf Min-Max daylight : 575 mm Screw dia: 30mm (up to 30%glass resistant)

Condition: used, machine/vehicle number: 13277, Rotor diameter: 320 mm Rotor width: 440 mm Rotor knives: 3×2 Stator knives: 2 Iiodpfx Aeyr Txvjbnef Feed opening approx. 450 x 300 mm Drive motor: 11 kW

Condition: used, Year of construction: 1999, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm Iedpfxozdk Hyo Abnsif > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included; positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW Item 5: Horizontal profile milling unit (top) ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Item 6: 3. Profiling spindle (hardware groove spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-ready (online capability) > Rebating unit for tear-free rebating > Double-part processing package > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Angled window processing unit > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Excluding machining tools ----- Price of the above-mentioned machine available on request! ----- Optional extra: EUR 6,500.00 Note regarding used tools: We currently have used "Gold" series tools in stock (Stock No. #2790) Window tools (Gold series) for IV78 Wood and IV78 Wood/Aluminum Previously used on a Weinig Unicontrol 10; a jointing cutter is additionally required for use on a Unicontrol 6. Tool set for fixed-stroke or CNC spindle machines (80 mm and 95 mm stroke), (Tool set prepared for IV92 where technically feasible) Wood-aluminum tool set for fix...

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Iodpfjy T R Tuox Abnoif Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial a...

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: NO-19-06-08209/GE1101825, Manufacturer: EFD Induction a.s. Type: SINAC 200/320 SM DUAL 2U2F Serial number: NO-19-06-08209/GE1101825 Year of manufacture: 2019 Electrical data Input voltage: 3 × 400 V Input current: 368 A Mains frequency: 50/60 Hz Input power: 254 kVA Reactive power: 254 kVAr Output data Output voltage: Not specified Output current: 7200 A Output power: 200 kW Frequency range: 2 × 9-13 kHz Cooling & operating conditions Water consumption: 100 l/min Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Ambient temperature (operation): +5°C to +50°C Protection class (IP): IP54 Additional data (control unit / control cabinet VL-1000.2 SP) Type: VL-1000.2 SP Sinac 200/320 SM DUAL Serial number: GE-19-07-00417 Machine number: GE1101825 - 15153199 Input voltage: 400 V Isdpfx Abovw Tdrjnjif Input current: 38 A Mains frequency: 50 Hz Power: 18 kVA

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, - Machine in very good technical and visual condition - Sale includes a NEW Powerhand VRS 200 car recycling system - Available immediately Iodpszudxqefx Abnoif ! Purchase from the official Powerhand dealer!

Condition: used, Year of construction: 2018, operating hours: 5,596 h, Equipment: ABS, all wheel drive, JCB TM320 T4F – CONSTRUCTION MACHINERY IN PERFECT WORKING ORDER!!!!! - HEIGHT 2.70M, CAN BE TRANSPORTED ON A FLATBED TRAILER!!!!! - GERMAN VEHICLE - SOLID RUBBER TIRES - SELF-PROPELLED WORK MACHINE, SEE INSPECTION REPORT - CABIN: PORS/FOPS - LIFT ARM WITH WHEEL LOADER ATTACHMENT AND TWO HYDRAULIC AUXILIARY CIRCUITS - HYDR. REVERSE FAN FOR AIR CONDITIONING SYSTEM - DRIVER'S SEAT WITH AIR SUSPENSION Iedpfezt Ub Hsx Abnjif - BUCKET TYPE: BUCKET 240 HDXL, VOLUME 1 CUBIC METER OPERATIONAL DATA JCB TM 320 T4F (HOMEPAGE) ? Model: JCB TM 320 T4F ? Machine Type: Telescopic Wheel Loader ? Application Areas: Agriculture, Construction, Recycling, Industry, and Handling Operations Engine & Performance ? Engine: 4.4-liter JCB EcoMAX T4F engine ? Emission Standard: Tier 4 Final / Stage IV ? Engine Power: 93 kW / 125 hp ? Maximum Torque: 550 Nm at low engine speeds ? Exhaust Aftertreatment: SCR technology with AdBlue, without diesel particulate filter Drive & Transmission ? Transmission: 4-speed powershift transmission ? Torque Converter Lock-up: TorqueLock ? Maximum Speed: up to 40 km/h ? Drive: permanent all-wheel drive ? Differential: locking differential Lifting Capacity & Hydraulics ? Rated Load Capacity: 3,200 kg ? Maximum Lifting Height: approx. 5.20 m ? Maximum Forward Reach: approx. 2.95 m ? Hydraulic System: Load-Sensing Hydraulics ? Hydraulic Output: 140 l/min ? Breakout Force: 62.6 kN Dimensions & Weight ? Operating Weight: approx. 8,142 kg, depending on equipment and tires ? Overall Length: approx. 6.32 m including standard bucket in transport position ? Overall Width: approx. 2.35 m ? Height over Cabin: approx. 2.72 m ? Wheelbase: 2.55 m ? Turning Radius: approx. 4.35 m ? Articulation Angle: ±43° * Fuel Tank Capacity: 160 liters Brief Description ? The JCB TM 320 T4F combines the maneuverability of a wheel loader with the reach of a telescopic loader. ? Due to its high lifting capacity, powerful engine, and good maneuverability, the machine is ideal for professional applications. ? The permanent all-wheel drive and powerful hydraulics ensure reliable performance even under heavy-duty conditions.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information Ijdpfxszruwls Abnjif * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: excellent (used), mileage: 322,000 km, first registration: 11/2015, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 5,500 mm, Year of construction: 2015, Equipment: air conditioning, central locking, crane, cruise control, electric window regulation, parking heater, power mirror, = Additional options and accessories = - Aluminum fuel tank - Brake booster - Low-noise - Speed limiter - Refrigerator - Alloy wheels - Air suspension - Radio/CD player - Spare wheel - Rearview camera - Sleeper cab - Sun visor - Auxiliary heater - Tool box - Xenon headlights - Power take-off (PTO) - Central lubrication system = Additional information = Axle configuration Front axle: Alloy wheels; Steerable Rear axle 1: Alloy wheels; Suspension: Air suspension Rear axle 2: Alloy wheels; Steerable; Suspension: Air suspension Iiodpfsut Dhisx Abnef Weights Unladen weight: 13,300 kg Payload: 13,700 kg GVW: 27,000 kg Functional features Crane: Palfinger PK 22002-EH D, year of manufacture 2014, behind the cab Pump: Yes Tipper: Rear Condition Technical condition: very good Optical condition: very good

Condition: like new (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, total height: 2,075 mm, total width: 2,140 mm, total length: 3,250 mm, table length: 800 mm, overall weight: 2,450 kg, distance table to spindle center: 495 mm, Equipment: documentation/manual, ABENE milling machine, type VHF-320BS, in new condition, previously used in an educational institution. Specifications: - Year of manufacture: 2016 - Table dimensions: 800x400mm - X-axis travel: 600mm Iiodpfx Abozt Ibtjnef - Y-axis travel: 500mm - Z-axis travel: 450mm - Distance table-spindle: 45-495mm - 3-axis variable feed - Drilling spindle travel: 75mm - ISO 40 tool holder - Milling head, rotatable 140 degrees - Spindle speed: 55-3000 rpm, variable in 2 steps - Motor power: 7.5kW - Machine dimensions: 3250x2140x2075mm - Machine weight: 2450kg Machine equipped with: - SONY (Magnescale) digital readout on 3 axes - Variable spindle speed (digital display) - Variable feed, 3 axes (digital display) - Cooling system - Drilling spindle - Tool changer - Machine manual - Compliant with occupational safety regulations

Condition: used, mileage: 494,000 km, power: 235 kW (319.51 HP), first registration: 08/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, loading space length: 6,600 mm, loading space width: 2,550 mm, Year of construction: 2009, Equipment: ABS, air conditioning, crane, Volvo FE 320 / 6x4 Platform 6,60 m + CRANE + REMOTE ONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 494 000 km Iiedszt E Anspfx Abnsf EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION PLATFORM: 660 x 255 cm (L x W) CAPACITY: 14 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 450/135 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING CRANE: PM 16 LG + REMOTE CONTROL poka? kontakty TEL: poka? kontakty KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO poka? kontakty SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? poka? kontakty LASZLO - MAGYAR poka? kontakty COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: new, The cutting angle can be continuously adjusted manually within a range of 90° to 45°. Highly precise material feed, even with multiple feed cycles when cutting longer workpieces. Individual feed length: 500 mm. High feed rate possible while maintaining maximum accuracy. The 7.5-inch color touchscreen enables simple and intuitive control of all machine functions. The control unit allows programming of up to 60 programs for quick adjustment of the feed length. The machine can be controlled fully automatically, semi-automatically, or manually. The standard equipment includes control of the feed pressure, a stationary clamping device, and the feed rate. A frequency converter enables continuous adjustment of the saw blade speed within a range of 15-90 m/min. Iodpfsztva Djx Abnjif Cutting range examples: 90° round: 260 mm 90° square: 245 mm 90° rectangle: 245 x 250 mm +45° round: 180 mm +45° square: 170 mm +45° rectangle: 180 x 120 mm Including: Coolant system Pressure gauge for saw blade tension Mechanical saw brush Material slide

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface Iodjzh H N Espfx Abneif * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, TECHNICAL DETAILS - Spindle number : 1 - Honing range : Ø 1,5 - 50 [mm] - Honing stroke : 0 - 100 [mm] Iodpfxoug U Dys Abnoif - Spindle speed : 150 - 2500 [Rpm] - Dimensions : 1550 x 800 x 1450 [mm]

Condition: used, TECHNICAL DETAILS - Bar diameter : 20 [mm] - Bar length : 3200 [mm] POWER SUPPLY - Supply voltage : 440 [V] WEIGHT & DIMENSIONS - Machine floor space : 4200x600 [mm] - Machine height : 1150 [mm] - Machine weight : 420 [kg] Iedpfxeyhhxce Abnoif

Condition: used, TECHNICAL DETAILS - Bar diameter : 3-20 [mm] Iodowpl Aiepfx Abnoif - Bar length : 4000 [mm]

Condition: used, TECHNICAL DETAILS - center height : 320 [mm] GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Right grinding wheels dimensions : 225 x 20 x 76,2 [mm] - Power : 3 [kW] - Spindle speeds : 3000 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] Iiedpfx Asyn R I Tobnsf - Spindle internal cone : Morse 5 - Power : 0.9 [kW] POWER SUPPLY - Supply voltage : 380 [V] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Heidenhain display - Coolant tank * with paper filtering unit - 1 internal grinding spindle : 12000 [rpm]

Condition: used, TECHNICAL DETAILS - Bar diameter : 23 [mm] - Bar length : 3200 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4080 x 1200 [mm] - Machine height : 1750 [mm] Iodpfxozr Rutj Abnjif - Machine weight : 830 [kg] EQUIPMENT - Channel diameter : 24 [mm] - Pushcart diameter : 23 [mm]

Condition: new, Year of construction: 2024, Grinding wheel D x B 455 x 255 mm, workpiece diameter 1 - 60 mm, regulating wheel D x B 255 x 255 mm, regulating wheel speed 10 - 100 rpm, drive power 11 kW, weight approx. 3.7 tons, dimensions approx. 2,700 x 1,700 mm Machine suitable for continuous and plunge grinding, hardened and ground guideways, grinding and regulating spindle with hydrodynamic three-point bearing, central lubrication for slides and feed spindles, regulating wheel drive via DS motor, frequency-controlled, hydraulic dressing devices for grinding and regulating wheel, electrical equipment predominantly with Siemens components, electrical control cabinet assembled in Germany, GC 1810-NC with stepper motor and Siemens S7 control for plunge and feed movement. Iodpfx Abodlgq Uonjif Very economical price/performance ratio.

Condition: good (used), Equipment: gathering machine: • chain tensioner with hand fed • 15 stations • criss-cross delivery perfect binder • 18 clamps • milling and roughening unit • hotmelt spine gluing unit • hotmelt side gluing unit • premelter • pile cover feeder • cover pressing station Iisdped R Tgyefx Abnsf • gauzing station • 2. cover pressing station • stack delivery

Year of construction: 1991, condition: ready for operation (used), A repair-needing Arburg injection moulding machine is offered. Clamping force: 850kN, distance between tie bars X/Y: 320mm/320mm, mould mounting platens X/Y: 490mm/490mm, min. mould height: 250mm, max. opening stroke: 375mm, max. platen daylight: 625mm, ejector stroke/force: 150mm/38kN, screw diameter: 35mm, max. stroke volume: 144cm³, max. shot weight PS: approx. 120g, max. injection pressure: 1500bar. Machine weight: approx. 2500kg. Heater was removed, hydraulic pump runs unevenly. An on-site inspection is possible. Iedpsztra Hsfx Abneif