Used Cfs Powergrind280 for sale (254)

Condition: good (used), Code: 0329 Brand: PAOLONI Model: T 140 CF - CE Standard Ppedpeyviqqefx Ak Dsr Spindle moulder with sliding carriage for making joints in wood, plastics, composite materials and various – CE Standard Technical data Table dimensions 1300 x 652 mm Carriage mm 1300 x 240 – Carriage travel 1180 mm Max table opening 340 mm Table height 890 mm Spindle stroke 200 mm Interchangeable spindle diameter 40 mm Spindle speed rpm 3000/4500/6000/8000/10000 Motor power 7,5 Hp Suction inlet diameter 120 mm Overall dimensions mm 1300 x 900 x 1150 h Weight kg 630

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2020, next inspection (TÜV): 03/2027, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Walking Floor K100 92m³ 10mm Floor New TÜV, brakes, air bellows, etc. replaced General Info • Manufacturer: Knapen Trailers • Model/Type: K100 A5060 • Year of manufacture: 2020 • Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? • Country of registration: Germany • Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? • Gross vehicle weight: 36,000 kg 202003-0071956-r_order-configur? • Max. axle load: 24,000 kg • Max. king pin load: 12,000 kg (permitted in country of registration) • Volume: approx. 91.9 m³ • Tapered walking floor trailer • Axle design: rigid?rigid?rigid --- Dimensions • External length: 13,670 mm • External width: 2,550 mm • External height: 4,000 mm • Internal height front: 2,690 mm • Internal height rear: 2,785 mm • Fifth wheel height: 1,150 mm • King pin to 2nd axle: 7,750 mm • Axle distance 1st-2nd axle: 1,310 mm • Axle distance 2nd-3rd axle: 1,310 mm --- Axles & Chassis • 3 x SAF 9 t Intradisc+ Integral CD Off-Road axles • All axles rigid • Disc brakes Ø 430 mm • 10-hole wheel connection • Air suspension with standard control panel left in front of axles • Lift axle, fully automatic via EBS • Start assist included (3x braking) • Radio remote control for lift axle --- Tyres & Rims • Goodyear KMAX T • Tyre size: 385/65 R22.5 • Steel rims 22.5" x 11.75 • 6 wheels total • No spare wheel --- Body • Closed side walls left and right • Moving partition wall (min. ground clearance 100 mm) • Rear doors with external locking bars • One locking bar per door • Upper steel belts, left and right swiveling • Platform at front wall • Ladder on front wall left and right • Standard roof bows Ø 60.3 mm (4 units) • Bow storage: 3 x approx. 4,100 mm • Tarp 680 g/m² (RAL 9006 White Aluminum) • Tarp supports 3-position (4 units) • Lashing straps (4 units) --- Floor / Walking Floor • Cargofloor system CF-500 SL-C • Electric control • Ribbed aluminium floor boards 10 mm (21 boards) • Fixed front plate • Stainless steel plate at rear under floor Ppsdpfx Akjyxa Eks Djr --- Attachments • JOST landing legs with stroke equalization • Plastic toolbox left in front of axles (1000 x 500 x 500 mm) • 30 l water tank with soap dispenser • Closed side underrun protection • Swiveling mud flaps • Anti-spray mat on 3rd axle • Long stairway with extendable rear steps and platform • 2 x wheel chocks left • Broom and shovel holder right --- Lighting • 6 x round LED taillights (3-chamber) • LED fog and reversing lights • LED side marker lights (4 pairs) • LED marker lights at rear • Reflective contour markings according to EU regulations • LED work lights at rear (remote controlled) • LED work lights at landing legs (remote controlled) • LED LCG-2 switch unit --- Hydraulics/Connections • ISO-N and ISO-S connectors + 15-pin socket • Knapen Trailers V1 radio remote control • Hydraulic connections centrally at front wall (vertical) • Pressure line left, return line right • Additional hydraulic connections at landing legs • Brake connections present • Acoustic reversing signal (manually adjustable) --- Paintwork • Superstructure in RAL 7011 Iron Grey • Wheel hubs in RAL 2008 Bright Red Orange • Chassis and underside unpainted For further information, please feel free to contact me.

Year of construction: 2016, condition: as good as new (ex-display), Turbomolecular pump Status: As good as new Manufacturer: Leybold Type: MAG W1300 iP - DN200 CF Delivery time: ex stock Ppjdpfx Akohmb Eme Dor

Condition: used, mileage: 326,141 km, power: 390 kW (530.25 HP), first registration: 10/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 4,850 mm, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 10,550 mm, total width: 2,550 mm, total height: 3,830 mm, loading space length: 6,300 mm, loading space width: 2,400 mm, loading space height: 1,390 mm, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, retarder, traction control, trailer coupling, = Additional Options and Equipment = - Remote central locking - Lift axle - Air suspension - Towing jaw - Engine brake - PTO (power take-off) - Radio - Sun visor - Lane departure warning system - Toolbox = Remarks = Belgian registration documents. DAF CF 530 8x4 Lift and steering axle. Leaf spring suspension at the front / air suspension at the rear. Retarder. Fassi F545RA.2.25 XE Dynamic. 4 x hydraulic outriggers. 5 x hydraulic extensions. Rotator + 6th function. Scanreco radio remote control. 2.85 m - 15,500 kg. 4.60 m - 10,330 kg. 6.35 m - 7,330 kg. 8.20 m - 5,540 kg. 10.10 m - 4,410 kg. 12.00 m - 3,660 kg. 14.20 m - 3,080 kg. Psdoyw Hvyopfx Ak Dspr Trailer coupling. = Further Information = Technical Information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle: Tyre size: 385/65R22.5; Steered; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf spring Rear axle 1: Tyre size: 315/80R22.5; Twin tyres; Tyre tread inner left: 50%; Tyre tread outer left: 50%; Tyre tread inner right: 50%; Tyre tread outer right: 50%; Suspension: air suspension Rear axle 2: Tyre size: 315/80R22.5; Twin tyres; Tyre tread inner left: 50%; Tyre tread outer left: 50%; Tyre tread inner right: 50%; Tyre tread outer right: 50%; Suspension: air suspension Rear axle 3: Tyre size: 385/65R22.5; Steered; Tyre tread left: 70%; Tyre tread right: 70%; Suspension: air suspension Weights Curb weight: 21,540 kg Payload: 15,460 kg Gross vehicle weight: 37,000 kg Functionality Crane: Fassi Maintenance APK (periodic technical inspection): valid until 10/2026 Financial Information Price: On request Identification Type number: CF 530 8x4 / RETARDER / FASSI F5 = Company Information = ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), We speak Russian. We do our best to provide accurate information, but no rights can be derived from the posted texts.

Condition: used, Year of construction: 2007, 2007 | DAF CF 84.460 RSP | Used Suction Excavator | 232536 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 51300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 42 inspection points 32 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the suction excavator. Quite significant tire wear. Presence of oxidation on the bucket and turbine. All functionalities are working. Ability to cut off the air valve on the rear left of the vehicle. Damage to the rack dampening the access door on the right side. Absence of the GNR tank cap. Presence of two remote controls. Absence of the AD Blue tank cap. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40180 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Ppjdpfx Asyi Enwok Dor ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2007, 2007 | DAF CF 85.480 RSP | Used Suction Excavator | 188940 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 51300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 31 approved ✅ 5 imperfect ℹ️ 5 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the suction excavator, not everything is working properly. The tractor part is working correctly. No radio in the cab. Error message on the dashboard. Warning, exhaust system pipe. Provision of two remote controls for the vacuum. Presence of oxidation on the outer part of the bucket. The batteries were started using a booster. It is impossible to operate the hydraulic part, meaning the lowering of stabilizers, opening of the bucket, and tipping of the bucket is impossible to operate the hydraulic arm. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40181 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Pjdpfx Ajykuvmok Djpr ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020.12.171, total width: 3,590 mm, total height: 2,910 mm, total length: 2,210 mm, grinding width: 2,600 mm, grinding belt speed: 2,400 mm/s, grinding belt length: 3,250 mm, workpiece height (max.): 80 mm, grinding belt width: 2,650 mm, air demand: 192 m³/h, Heesemann KSA 8 Wide Belt Sander 2600mm Width The sander consists of: 1. Frame Structure For mounting the transport bed, with attachment points for 1 sanding unit and 1 brushing unit. 2. Transport Bed Individual conveyor belts with feed speed adjustable from 5 to 25 m/min, controlled by frequency converter, constant working height of 920 mm. Adjustment to workpiece thickness (3 to 80 mm) by height adjustment of the entire machine top, including monitoring of the toothed belt for the lifting gear at a lifting speed of 3 mm/s, and integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program memory for 1,000 programs. Motor speed values are stored and automatically set after program selection. 4. Profinet interface for higher-level control 5. Longitudinal sanding unit with contact roller for calibration (steel) Balancing quality Q 1 (finely balanced) according to VDI 2060, driven by poly-V belt, maintenance-free bearings. Diameter: 350 mm Abrasive belt dimensions: 3,250 x 2,650 mm Ppedpsywuqrefx Ak Djr Belt speeds: 1-24 m/s Drive power: 37 kW via frequency inverter Stepless adjustment of sanding belt speeds, wear-free brake device, intermittent belt blow-off device, automatic infrared belt control, sanding belt operates against feed direction, manual grit compensation Infeed: segmented, pneumatically controlled pressure bar Outfeed: continuous, pneumatically controlled pressure bar 6. Brush roller unit Central height adjustment, includes extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, with integrated fan. Operating voltage: 400V, 50 Hz Machine paintwork: Internal: light grey, RAL 7035 External: light grey, RAL 7035 Doors: anthracite, RAL 7016 Brush insertion side: left Terminal: front left 8. Ionizing bar, from above For dissipation of static charge, including high-voltage transformer 9. Workpiece blow-off device with rotating compressed air nozzles, at machine outfeed, including extraction hood General specifications of the sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 to 80 mm Dust extraction: Required air speed, minimum 20 m/s Much higher extraction speeds may result in functional disadvantages. Machine underpressure approx. 1000 Pa Air requirements for: - 1 longitudinal sanding unit, roller diameter 350 (socket 1 x diameter 330) 103.0 m³/min - 1 brushing unit, diameter 250 (socket 1 x diameter 206) 38.0 m³/min - Workpiece blow-off (2 sockets x diameter 120) 28.0 m³/min - Conveyor belt blow-off (socket 1 x diameter 160) 24.5 m³/min - Exhaust air from fan for workpiece vacuum clamping system (socket 1 x diameter 180) 30.5 m³/min Total air requirement: 224.0 m³/min

Condition: new, Year of construction: 2025, Z-MaT Power V10 New Design Vertical CNC Machining Center Siemens 828D, Shop Mill 15" Touchscreen with 5 axes (3+2, 255mmØ table) Axis Travels X-axis travel: 1050 mm Y-axis travel: 650 mm Z-axis travel: 600 mm Spindle nose / Table: 120–720 mm Work Table Table size: 1400 x 650 mm Max. table load: 1,000 kg T-slot size: 18 x 5 x 100 mm Spindle Data Spindle: SK 40, 12,000 rpm DDS, incl. oil chiller Spindle motor: 18.5/15 kW Tool Changer Double-arm gripper, 30 positions / 8 kg Feed Rates Cutting feedrate: 0–12,000 mm/min Rapid traverse (X/Y/Z): 30 m/min Dimensions & Weight Overall dimensions: 3,200 x 2,500 x 2,450 mm Total weight: 8,200 kg Standard Equipment - Full enclosure - Electronic handwheel (MPG) - Spindle oil cooler - LED work area lighting - Air blast through spindle - LED status signal light (3 colors) - Automatic central lubrication system - Coolant system with nozzles around the spindle - Coolant chip flushing system - Tapping without compensation chuck - 3-axis linear roller guides - Electrical cabinet heat exchanger - Ethernet, CF card, USB interface - Leveling bolts and machine feet - Toolbox - Coolant gun - Air gun Pjdpfxeww A Dys Ak Dspr - Operating manual - CE compliance Including special accessories: - Spiral chip conveyor - Coolant through spindle, 30 bar - 3+2 axis table, 255mm diameter Note: Video shows a machine of a different series with 3+2 axis table This machine will be exhibited at EMO, Hall 12/D10, and will be available immediately after the show.

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 2,000 kW (2,719.24 HP), type of input current: three-phase, type of cooling: water, overall weight: 9,319 kg, input voltage: 400 V, total width: 1,900 mm, total length: 4,400 mm, total height: 2,400 mm, Watercooled chiller York YK CG CF Q7 5CI F 2000 kW Cooling capacity: 2000 kW / 568.69 tons (12/7 — 35°C) Year of manufacture: 2005 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. York YDHF52DD (Centrifugal, inverter) Type of refrigerant: R134A Ppodpfx Akexyxnke Der Dimensions: 4.4x1.9x2.4 m. Weight: 9319 kg. Working hours: 35957 h. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: as good as new (ex-display), Year of construction: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – directly from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Dimensions and Weight: - Max. width/depth: 2300 mm - Approx. length: 2530 mm - Approx. width/depth: 1595 mm - Approx. height: 1795 mm - Approx. weight: 2600 kg Working Range: - Chuck diameter: 150 mm - Chuck clamping actuation: hydraulic - Centre height: 223 mm - Centre distance: 850 mm - Swing diameter over bed: 446 mm - Swing diameter over gap: 520 mm - Swing diameter over cross slide: 240 mm - Bed width: 300 mm Servo Torque: - X-axis: 6 Nm - Z-axis: 8.5 Nm Spindle Speed Range: - Number of speed ranges: 1 - Spindle speed range: 10 – 3000 rpm Electrical Data: - Drive motor power: 7 kW - Voltage: 400 V - Network frequency: 50 Hz - Total connected load: 23 kVA Accuracy: - Repeatability: ± 0.005 mm - Positioning accuracy: ± 0.005 mm Hydraulic System: - Motor power: 0.75 kW - Tank capacity: 50 l Ball Screw: - X-axis diameter: 25 mm - X-axis lead P: 5 mm - X-axis accuracy grade: C3 - Z-axis diameter: 40 mm - Z-axis lead P: 5 mm - Z-axis accuracy grade: C3 Coolant System: - Coolant pump power: 270 W - Tank capacity: 90 l Machine Data: - Spindle bore diameter: 40 mm - Drive motor torque: 33 Nm Tailstock: - Taper: MT 4 - Quill travel: 165 mm - Quill diameter: 52 mm Spindle: - Spindle nose: DIN ISO 702-1 No. 5 - Spindle bore/bar capacity: 52 mm Controller: - Type: Sinumerik 828D PPU 240 - System software: SW 24 - CNC memory: 3 MB - Look Ahead: 50 - Block change time: 3 ms - Number of tools: 128 Travel: - X-axis: 250 mm - Z-axis: 760 mm Vertical Spindle: - Drive motor continuous power S1: 7 kW - Drive motor S6-30% duty cycle power: 16 kW - Drive motor torque: 33 Nm - Drive motor torque S6-30% duty cycle: 80 Nm Feed Rate: - X-axis: 15,000 mm/min - Z-axis: 15,000 mm/min Feed Force: Ppsdpjymkwrjfx Ak Dor - X-axis: 7.5 kN - Z-axis: 5.3 kN Tool Changer: - Type: hydraulic; VDI 30 - Number of tool stations: 8 - Max. square tool shank height/width: 20 x 20 mm - Max. boring bar diameter: 25 mm Features: - Siemens spindle and servo motors - Full enclosure with safety interlock - Standard with max. spindle speed up to 3000 rpm - Automatic central lubrication - Swiveling control panel - Tailstock cover - Electronic hand wheels for X and Z axes - Coolant system with 90-liter tank - RJ45 connection, USB port, and 230 V power socket - EMC (Electromagnetic compatibility) - Six leveling feet - Operator tools included SINUMERIK 828D Basic – COMPLETE PACKAGE - Safety Integrated - Remainder material detection and machining - ShopTurn step programming - Network drive management - 3D simulation - Graphical tracking Control: - 10.4” color display - 4:3 format - User-friendly SINUMERIK Operate software - Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) Card Guides: - Rigid flat-bed guideways Ball Screw: - For high rapid traverse speeds on all axes - Reduced wear - High positioning and repeat accuracy

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Length: 1,40 m Width: 1,20 m Height: 1,85 m Ppodpfsvcqx Dsx Ak Djr Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: new, Year of construction: 2025, Fixed clip former CF-25 was designed by our company for fixed cleat production of standing seam roofing panels with a seam high of 25mm. Following clip is the main fixation element that ready roofing panel fastens to the roof base. A fixed clip has many advantages, such as simple design, low production cost, easy installation. We make clip formers for 25, 27 or 39mm clip highs. As blank, you can use metal in strips of the required width with up to 0.8 mm thickness. You can make product clip in one easy step -just need to put blank metal into the press and activate the press with manual handle system. Clip former makes clip bending and necessary holes cut in one-step operation. Thus, with our clip production press customer has opportunity to produce a fixed clamp in numbers, using it for his own needs or to sell it for other roofing installation companies. Fixed clip former is lightweight one, which allows taking device to working places and transport it easily. For productive work, clip former must be securely fastened to a flat surface. Fixed clip former press CF-5 made by our company will save your time and money from looking for standing seam fixation elements suppliers, will help you effectively organize your product production and will make roofing works more convenient. Ppjdpfsqxadbjx Ak Der We also manufacture sliding clip formers. As an option we can make fixed clamp former for standing seam panels of 25, 27mm or 39mm lock high, those panels you can make with following machines: Standing seam roofing machine F3; Roof panel standing seam roll forming machine F3-27 with clip relief; Standing seam roll former F3-39;

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication Pjdpfx Akow Ed U Ne Depr - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm Podpohalvdjfx Ak Djpr good condition

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit Pedpfxsdz Srae Ak Dopr - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Ppsdpfx Aedz Srbsk Dsr Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Condition: used, functionality: fully functional, machine/vehicle number: 2160, mileage: 782,000 km, power: 300 kW (407.89 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 7,243 kg, overall weight: 20,500 kg, tire size: 315/80/22.5, tire condition: 70 %, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 10/2026, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of beds: 1, Year of construction: 2012, Equipment: ABS, AdBlue, additional headlights, air conditioning, car registration, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, low noise, non-smoking vehicle, onboard computer, parking heater, power assisted steering, power mirror, seat heater, soot filter, tachograph, traction control, CF high roof cab and 1 bed, 12.9-liter engine, ZF manual gearbox, tipping hydraulics, German vehicle from first owner. Sale only to traders and under exclusion of any warranty. We deliver to any German seaport. Ppjdpfx Akoyrz Ire Djr

Condition: used, Year of construction: 2001, CNC Fixed Bed Milling Machine CORREA type CF 17 D Year of construction: 2001 Travel X: 2000 mm Travel Y: 800 mm Travel Z: 800 mm Numerical Command: HEIDENHAIN 426 Spindle: ISO 50 Spindle speed: from 20 to 3000 RPM Table size: 2000 x 700 mm Max weight on table: 3500 kg Spindle motor: 17 kW Dimensions (L x W x H): 5300 x 2900 x 2800 mm Ppsdpfxoyrf H Eo Ak Dsr Weight: 9 T

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: Pedsw N Rh Aepfx Ak Dopr - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: used, Year of construction: 2000, functionality: fully functional, NEW PRICE! Manufacturer: HOMAG Model: KFL 10/22/QE/CF Type: Double-side Sizing & Edge Banding machine Year: 2000 Status: Connected, test possible. Location Lithuania Basic machine Workpiece thickness 12...60 mm Workpiece width 70... mm Workpiece overhang to transport chain 40 mm Feed 10...40 m/min Power consumption Main drive 3...75 kW Ppsdpfx Aeuggpzjk Dor Height adjustment 0,2 kW Machine main drive Feed 6...30 m/min Power draw 2,2...6,9 kW Gluing unit Edging type: Straight and softforming edges Edging material height 16...65 mm Workpiece feed max. 60 m/min Contour, trimming unit CF/CS 10/11/12 Discharge valve HMA 1 Melting unit HMG 12-1x1-M-HO Gluing section for preformed parts Type of edge Straight edges drum profiles Edge material Belt from roll Snipping unit for profile parts WK 46 Saw blade (diameter 80 mm, cutting width 3.2 mm, drill hole 34 mm, number of teeth 20) Flush-trimming unit and scraping unit for performed parts Buffing unit for performed parts Specification, layout on request

Condition: good (used), mileage: 353,065 km, power: 300 kW (407.89 HP), first registration: 01/2013, fuel type: diesel, axle configuration: 6x4, wheelbase: 2,450 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, loading space length: 6,500 mm, loading space width: 2,450 mm, Year of construction: 2013, Equipment: AdBlue, air conditioning, crane, cruise control, electric window regulation, fog lights, power mirror, soot filter, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Power brake booster - EPS (Electronic Power Steering) - Low noise - Tipping hydraulics - Air horn - Particulate filter Ppsdpfx Akowuum Ie Dsr - Radio/CD player - Side door - Toolbox = Further Information = Axle Configuration Suspension: leaf suspension Front axle: steered Weights Unladen weight: 15,070 kg Payload: 10,930 kg Gross vehicle weight: 26,000 kg Functional Crane: Palfinger PK18002, year 2012, mounted rear on chassis Condition Technical condition: good Optical condition: good Warranty Warranty: No liability for printing or typing errors. Subject to change and prior sale. Errors excepted! Additional Information Contact Emad Al Shogran for further details. Vehicle number: 155 Daf CF 85.410 / 6X4 / Full Leaf Suspension / Palfinger PK18002 with Remote / Euro 5 .: XLRAT85MC0E961721 Suspension: leaf/leaf Transmission: automatic Air conditioning Engine brake Euro 5 Wheelbase: 4850 mm CRANE: Brand: Palfinger Type: PK 18002 Year: 2012 With radio remote control Crane working hours: 2,700 h Internal Dimensions Length: 6.50 m Width: 2.45 m = Company Information = No liability for printing or typing errors. Subject to change and prior sale. Errors excepted! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: used, mileage: 422,000 km, power: 338 kW (459.55 HP), first registration: 06/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 4,800 mm, loading space width: 1,350 mm, loading space height: 1,450 mm, Year of construction: 2008, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, DAF CF 85.460 Hooksystem + CRANE / 6x4 Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2008 ? MILAGE: 422 000 km EQUIPMENT: ? ABS ? ASR ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING Ppedeynqh Tepfx Ak Dor ? TACHOGRAPH TOTAL WEIGHT: 26 000 kg WHEELBASE: 486/140 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING CRANE: EPSILON E120Z TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 8611

Condition: like new (used), The Manzini UHV-30 INOX Hot Break unit is a thermal system designed for the quick inactivation of enzymes by instantaneous heating of fruits such as tomatoes. This process is essential to preserve the viscosity of the final product, especially in the production of high quality tomato pulp or paste. The equipment allows an efficient extraction of solids and a significant improvement in the texture of the concentrate. INCLUDED: * Robuschi vacuum pump * 2 CFS pump Ppedpfxeyni Eke Ak Dor * 2 Centrifugal pump. * 2 Bardiani valves The production will vary depending on the product.

Condition: good (used), mileage: 753,951 km, power: 330 kW (448.67 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, Year of construction: 2019, Equipment: AdBlue, air conditioning, cruise control, electric window regulation, fog lights, parking heater, power mirror, soot filter, spoiler, = Further Options and Accessories = - Aluminum fuel tank - EPS (Electronic Power Steering) - Particulate filter - Radio/CD player - Sleeper cab - Side door - Auxiliary heater - Toolbox = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Front axle: Steering; Suspension: Leaf springs Rear axle: Suspension: Air suspension Weights Unladen weight: 7,501 kg Payload: 11,499 kg gross vehicle weight: 19,000 kg Maintenance, History, and Condition APK (Roadworthiness Test): valid until 08/2026 Technical condition: good Visual condition: good Vehicle number: 54 DAF CF 450 / 4x2 / Super Space / Euro 6 VIN: XLRTEM4100G251649 Transmission: Automatic Suspension: Leaf/Air Air conditioning Engine brake Cruise control Distance assist Lane departure warning system Emission standard EURO 6 No liability for typographical or printing errors, changes, prior sale and mistakes excepted! = Company Information = No liability for typographical or printing errors, changes, prior sale and mistakes excepted! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Ppedoyna Atspfx Ak Djr Mobile: Mrs. Sabine Faust Email.

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Moving Floor Trailer K100 92m³ 10mm Floor General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross vehicle weight rating: 36,000 kg 202003-0071956-r_order-configur? * Maximum axle load: 24,000 kg * Maximum kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered moving floor semi-trailer * Axle configuration: rigid/rigid/rigid ----Dimensions External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Fifth wheel height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st/2nd axle: 1,310 mm * Axle spacing 2nd/3rd axle: 1,310 mm ----Axles & Running Gear 3 x SAF 9 t Intradisc+ Integral CD Off-Road Axles * All axles rigid * Disc brakes Ø 430 mm * 10-bolt wheel connection * Air suspension with standard control panel on the left before the axles * Axle function as lift axle, fully automatic via EBS * Including traction aid (3x brakes) Ppsdpfx Asymhxgsk Dor * Radio remote control for lift axle ----Tyres & Wheels* Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels in total * No spare wheel ----Bodywork Closed side walls left and right * Sliding partition wall (minimum ground clearance 100 mm) * Rear doors with external locking bars * One locking bar per door * Steel top rail, extendable left and right * Platform at front bulkhead * Ladder on front bulkhead left and right * Standard roof bows Ø 60.3 mm (4 pieces) * Bow space: 3 x approx. 4,100 mm * Curtain 680 g/m² (RAL 9006 White Aluminium) * Curtain supports 3-position (4 pieces) * Tensioning straps (4 pieces) ----Floor / Moving Floor Cargofloor System CF-500 SL-C * Electric operation * Corrugated aluminium floor boards 10 mm (21 boards) * Fixed front plate * Stainless steel plate at rear under the floor ----Mounting Parts JOST landing gear with thrust compensation * Plastic toolbox left in front of axles (1,000 x 500 x 500 mm) * 30 l water tank with soap dispenser * Contiguous side underrun protection * Swinging mudflaps * Antispray mat on 3rd axle * Long rear-mounted ladder with extendable stair and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting 6 x round LED tail lights (3-chamber) * LED fog and reversing lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulation * LED work lights at rear (radio-controlled) * LED work lights on landing gear (radio-controlled) * LED LCG-2 switch unit ----Hydraulics / Connections ISO-N and ISO-S plug + 15-pin connector * Knapen Trailers V1 radio remote control * Hydraulic connections centrally on front bulkhead (vertical) * Pressure line left, return line right * Additional hydraulic connections at landing gear * Brake connections present * Audible reversing alarm (manual setting) ----Paintwork Bodywork in RAL 7011 Iron Grey * Wheel hubs in RAL 2008 Light Red Orange * Chassis and underside unpainted For further information, please feel free to contact me.