Used Centiom Sab-Hw18 for sale (363)

Condition: used, Year of construction: 2005, Overview  Hodpfjxb Ai Uex Amyer The glass depalletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in a German dairy company. The palletizer is now being released as the owner is shutting down the production. Technical details/ scope  - Depalletizer with lift and discharge at the bottom - With intermedeiate layer remover and magzine - With slide for top layer/cover - Enclosed conveyors can pull off single lane wise for shaped bottles - Incl. protective fences, pallet transport, discharge table

Condition: used, Year of construction: 2017, Overview  This semi-automatic new glass pusher was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be viewed in person at any time. Technical details - Semi-automatic new glass pusher with interchangeable gripper units Hedpfsvtpc Asx Amyor - 4 heads: adjustable depending on the layer pattern - ALWID FEEDING TABLE + ALWID DEPALLETIZER

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives Hedou R Sxxopfx Amyor - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: excellent (used), Three-phase motor, electric motor -Power: 160 kW -Speed: 2960 rpm -Voltage: 500 V (delta) -Protection class: IP 23 -Design: B3-B5 -Shaft: Ø 70 mm -see photo nameplate for further details Hjdeb A Skzepfx Amyer -Weight: 830 kg

Condition: good (used), Year of construction: 2000, Three-phase motor, electric motor -Power: 250 kW -Speed at 50 Hz: 2985 rpm -Speed at 60 Hz: 3580 rpm -Shaft: Ø 65 mm -Height of shaft axis: 350 mm -Recess: Ø 680 mm Hodpepmdalofx Amyjr -Flange: Ø 800 mm -Protection class: IP 55 -Design: B3B5 -Dimensions: 1400/800/H1070 mm -Weight: 1500 kg

Year of construction: 2020, condition: good (used), Hot glue gun dispenser, glue pump, melting machine, glue melter, melting oven, hot glue gun, glue binder Hodpfjygtnysx Amyjr -Manufacturer: Nordson, VersaBlue melting device with accessories -Type: VB_ENG -Pumps: 3 gear pumps -Accessories/individual components: see photos -Dimensions: 1070/760/H1380 mm -Total weight: 330 kg

Condition: used, axle configuration: 3 axles, first registration: 03/2010, loading space length: 13,300 mm, loading space width: 2,480 mm, loading space height: 2,890 mm, suspension: air, tire size: 385/65/r22,5, wheelbase: 1,300 mm, Year of construction: 2009, Tyre size: 385/65/r22,5 Suspension: air suspension Hjdezi Dlaepfx Amyer Drive: Wheel Empty weight: 8.480 kg Carrying capacity: 33.520 kg GVW: 42.000 kg Make of bodywork: LECITRAILER Platform

Condition: used, Technical details: bore capacity in steel (diameter): 25 mm throat: 310 - 315 mm bore stroke: 200 mm spindle taper MT: MK4 spindle speed:: 63 - 1000 U/min Distance spindle/table max.: 670 mm table clamping surface:: 640 x 540 mm table rotating: 360 ° current- max.: 7 A total power requirement: 3 kW weight of the machine ca.: 700 kg Hedpfx Ajzfiy Uomyer dimension machine xH: 0,9 × 0,6 × 2,46 m

Condition: used, mileage: 12,100 km, power: 140 kW (190.35 HP), first registration: 11/2023, fuel type: diesel, overall weight: 7,490 kg, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU commercial vehicle center in Germany offers competence, service, and advice: ISUZU M30 H with CTS 04-37 roll-off tipper with remote control PAYLOAD 3,500 kg with a total weight of 7,490 kg or optionally 4,400 kg with 8,500 kg First registration: November 28, 2023 Mileage: 12,100 km VAT can be shown separately. Equipment: - 5.2-liter turbocharged diesel engine with Commonrail direct injection, 140 kW / 190 hp, EURO VI OBD-E (max. torque of 510 Nm at 1,600 – 2,800 rpm) - Particulate filter system with DPD system and AdBlue (the self-cleaning system enables the filter to be cleaned without a workshop visit, thanks to the new DPD regeneration technology, which indicates when the function is needed. All you have to do is press the DPD button, and the system cleans itself in 20 minutes) - Particulate filter system with DPD system and AdBlue (the self-cleaning system enables the filter to be cleaned without a workshop visit, thanks to the new DPD regeneration technology, which indicates when the function is needed. All you have to do is press the DPD button, and the system cleans itself in 20 minutes) - Automated manual transmission (NEES II) with 6 gears; smooth and precise starting is provided by an integrated torque converter! The gears can also be shifted manually on the gear lever. - Power steering, on-board voltage 24 V - Wheelbase 3,365 mm, turning radius only 6.30 m - Leaf spring suspension at the front (axle load max. 3,100 kg), leaf spring suspension at the rear (axle load max. 6,000 kg) - ABS with EBD and electronic traction control on the rear axle (ASR) - Electronic Vehicle Stability Control (EVSC) system - Lane departure warning system, emergency braking assistant (AEBS) - Tires 215 / 75 R 17.5 (M + S) - AIR CONDITIONING - Suspended driver's seat, double passenger seat, 3-seater - Electric windows - Electrically adjustable and heated exterior mirrors, electronic immobilizer - DAB+ radio with Bluetooth hands-free system - Digital EG control unit 4.0 (GNNS) - Fog lights, daytime running lights, automatic headlight control - Driver's airbag, headrests - height and tilt adjustable steering wheel, interior mirror - Manually adjustable idling speed - Engine speed control in the cabin - Central locking with remote control - Spare wheel, stored separately Vehicle superstructure: - Telescopic roll-off tipper CTS 04-37 Design according to DIN 30722 Part 3, hook height 900 mm, superstructure CE certified, telescopic hook arm, allowing for various container lengths Operation via control panel with remote control Traction force 4,900 kg Hydraulic locking of the roll-off tipper in the driving position Automatic mechanical hook locking Load-holding valves on all hydraulic cylinders, emergency stop function Auxiliary drive / single-circuit hydraulic system complete with hydraulic pump, oil tank, lines Included additional equipment for the vehicle: Ball hitch, 3.5 t trailer load 1 work light LED at the rear of the cab roof 2 dust boxes mounted on the chassis, made of plastic, lockable, splash-proof Extra package 4 NPR automatic (rubber floor mats, nets for upper storage compartments in the cab, perforated cover for the SCR system, engine cover at the rear of the cab, safety package consisting of warning vest, warning triangle, warning light, first aid kit) Rear lights - protective grilles (galvanized) Wide-angle mirror on the right and left, heated Curb mirror on the right Hedpfx Aezhyu Usmyjr Sun visor for the windshield Rain and wind deflectors for

Condition: used, Year of construction: 2013, operating hours: 1,700 h, machine/vehicle number: M292, Used Filling Monoblock Alfatek for olive oil 1500 bph General Features of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH The ALFATEK MBV 9/1 VOLUMETRICA SABRY filling monoblock, built in 2013, offers an efficient and reliable solution for bottling edible oil. It operates at a speed of 1500 bottles per hour, with clockwise rotation and a fully automated workflow. In fact, the machine currently runs in active production, having completed approximately 1700 operating hours. Moreover, it includes all safety protections, user manuals. Container Compatibility and Supported Formats The Used Filling Monoblock Alfatek for Olive Oil 1500 BPH handles a wide variety of containers. Specifically, it works with both PET bottles and metal cans, supporting the following formats: PET 138x138xh253 mm PET 148x148xh320 mm PET 81x81xh236 mm PET 63x63xh184 mm Cans 150x92xh192 mm Hodjwiu Rvepfx Amysr Cans 150x92xh261 mm Cans 149x120xh315 mm Consequently, the machine adapts easily to diverse packaging needs. Whether the production involves small household bottles or larger industrial formats, this monoblock provides the required flexibility. Additionally, this versatility reduces the need for multiple machines, optimizing both space and investment. Filling Section: Volumetric Technology The filling section of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH uses 9 volumetric valves. These valves deliver accurate and repeatable dosing, which is especially important for high-viscosity products like olive oil. Notably, the system uses fixed valves and operates in a non-isobaric configuration. Therefore, it suits still liquids and avoids the complexities associated with pressurized systems. Furthermore, the volumetric method helps maintain product integrity while minimizing waste and overfill. Press-On Capping: Compatibility and Sizes The machine applies plastic press-on caps using one capping head, which supports multiple cap dimensions: Ø51.5 x 23 mm Ø37.5 x 22 mm

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration unit Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:YAG laser with Hurryscan 10 - galvanometer head from Scanlab Fuchs extraction and filtration unit TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted individually Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Hsdpfx Amjzdqcueyor We would be happy to answer any further questions you may have by phone.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 1,850 kg, maximum load weight: 8,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,740 mm, total length: 4,900 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Tandem Low-Bed Trailer for Skip Containers * High-tensile steel welded chassis construction * 1 pair of adjustable and removable skip container locking wedges * 1 pair positioned in front of the container * Lashing rails for skip containers on both sides of the body * Front jockey wheel * Steel mudguards covering both wheels * Aluminium side underrun protection * 2 wheel chocks with holders * Recessed rear storage compartment integrated into the floor, approx. 650 × 240 × 240 mm (W × L × D), with slightly raised lid ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * 2 Euro axles (manufacturer's choice) with tapered roller bearings and S-cam drum brakes * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Parabolic leaf suspension with maintenance-free steel-rubber bushings and mechanical load equalisation (walking beam system) ### Wheels & Tyres * 235/75 R 17.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * 24 V ABS and automatic load-dependent braking (ALB), with front ABS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 × 7-pin non-interchangeable front connectors with connecting cable ### Low-Bed Body (TTS) * Low-profile steel well body * Steel floor plate * Steel side walls fully welded to the floor for maximum durability Note: Minor floor distortion caused by the welding process is technically normal. ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline Hodpfxozhfzgs Amyer * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis painted in customer's colour * Drawbar painted to match the chassis --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, mileage: 231,613 km, power: 375 kW (509.86 HP), first registration: 06/2021, fuel type: diesel, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, Mercedes-Benz AROCS 10x4/6, registered: 06/04/2021 * Automatic transmission * 5-axle vehicle * 231,613 km * 12,809 ccm * 375 kW (510 hp) * Arctic white * Technically permissible total weight: 44,000 kg * Front axle 8.0 t * Front axle, straight design * Rear axle, crown wheel 300, planetary, 13.4 t * Axle ratio i=4.333 * Leaf spring suspension, rear axle * ABS & ASR * Disc brakes on front and rear axles * Parking brake, electronic * Parking brake, additionally on the front axle * Secondary water retarder * Wheelbase * Stabilizer bar, front axle & 1st rear axle * ECE compliant * Driver's comfort suspension seat * Co-driver's functional seat * Seat covers, velour * Air conditioning * MirrorCam * Light sensor * Rain sensor * Tires/Tyres, tubeless: * 1st axle 315/70 R 22.5, 5/9 mm * 2nd axle 315/70 R 22.5, 11/11 mm * 3rd axle 315/70 R 22.5, 5/11/12/11 mm * 4th axle 315/70 R 22.5, 9/8/9/11 mm * Digital tachograph * Tachograph manufacturer: VDO * Digital radio * Speakers, 2-way system * Navigation system * Comfort telephony, wireless charging * Multimedia cockpit * Front driven axle 8t, hydraulically steered, liftable * ABS can be deactivated * Steering system, standard, electro-hydraulic * MOBAS type: HG 28-6.4 SK * Main tank 240 l, left side * Additional tank 145 l, right side * Tank 290 l, right side * Front spring 2x8.0 t, 3-leaf * Rear spring 2x15.0 t * Tow hitch, rear, Rockinger * Cruise control Hedpfxozhdkys Amyer * Single PTO * All information without guarantee

Condition: used, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2019, suspension: air, • Coil well 7.20 m Hjdpey Agrxofx Amyjr • Aluminum rims • PVC toolboxes • Height adjustable/raisable 3.00 m rear doors 2.85 m under side rail • Internal dimensions 13.62 x 2.48 x 2.70 m

Condition: used, empty load weight: 6,880 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2019, suspension: air, load capacity: 32,120 kg, • Coil well 7.20 m • Aluminum rims • PVC toolboxes • Height adjustable/raisable 3.00 m rear doors 2.85 m under side rail • Internal dimensions Hjdpfjx E Schex Amyor 13.62 x 2.48 x 2.70 m

Condition: excellent (used), 3-axis machining center Work area: 1350 x 2565 mm. Hjdpezcpfasfx Amyor Workpiece clamping via vacuum pump.

Condition: ready for operation (used), An Asco Rail assembly and disassembly stand for brake slack adjusters with a functional testing device is available. Operating pressure: 6bar, max. test force: 100kN, cylinder stroke: 300mm. Documentation available. An on-site inspection is possible. Hsdpfx Ajzf Nbremysr

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New equipment, in stock, available for immediate delivery -Volume: 18,000 liters -Maximum temperature: 450°C Hedpfx Ameu Hma Neyjr -Internal dimensions (L x W x H): 4100 x 2100 x 2100 mm -External dimensions (with rails) (L x W x H with lifting door): 9970 x 3060 x 6110 mm -Control system: Eurotherm Nanodac -Temperature stability (at nominal temperature, without load): ±5°C -Automatic inlet and outlet dampers -Electric lifting door -Electrically driven furnace car -Power: 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Furnace, furnaces, annealing furnace, firing furnace, hardening furnace, heating furnace, furnace, stress-relieving furnace, enameling furnace, drying furnace, industrial furnace, heating chamber, heating oven, temperature oven, drying cabinet, chamber furnace, large-volume furnace.

Condition: used, power: 11 kW (14.96 HP), volume flow: 5,800 m³/h, Extraction system for grinding and deburring machines 11 kW Hedpfx Amezdzfyeyor 5800 m³/ h

Condition: used, ISAM ESAB submerged arc welding system for cylinder coating No. 01 ESAB submerged arc wire welding systems No. 01 ESAB welding sources mod LAF 1250 DC (output 40 – 1250 A – NOMINAL POWER 1250 A/44V/100%) Nr 01 Command pulpit Hodjtq Ar Tepfx Amyor No. 01 positioned for rollers with a diameter of approximately 400 x approximately 4000 mm Sand supply system for submerged arc welding Matr 208202

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW Hodeu Idmvepfx Amyor max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: used, axle configuration: 3 axles, first registration: 12/2011, loading space length: 7,140 mm, loading space width: 2,450 mm, loading space height: 2,600 mm, suspension: air, tire size: 265/70R19,5, wheelbase: 3,250 mm, Year of construction: 2011, Suspension: air suspension Axle 1: Tyre size: 265/70R19,5; Double wheels Axle 2: Tyre size: 265/70R19,5; Double wheels Axle 3: Tyre size: 265/70R22,5; Double wheels Hedpfx Aoyzptcsmysr Drive: Wheel Empty weight: 6.220 kg Carrying capacity: 19.780 kg GVW: 26.000 kg Make of bodywork: LECITRAILER

Condition: new, fuel type: diesel, axle configuration: 3 axles, color: yellow, gearing type: automatic, Equipment: ABS, air conditioning, navigation system, * Mercedes-Benz radio * DAB radio * Bluetooth * Sun visor Hjdpfx Aeq A E Eiemyor * Rear window ----* Predictive Powertrain Control (PPC) * Active Brake Assist 5 * Traffic sign assistant * ECO-Roll * Crawl mode ----* HYVA roll-off body * Type: 20-47-S * Year: 07.2022 * Rockinger jaw coupling ----* Tire dimension front: 315/80 R 22.5 * Tire dimension rear: 315/80 R22.5 * Fuel tank: 400 ltr * AdBlue tank: 70 ltr. ----Internal vehicle number: 7553----Errors and prior sale reserved.

Condition: used, mileage: 64,571 km, power: 353 kW (479.95 HP), first registration: 11/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, 0P0H9 12.4 liter in-line six-cylinder D2676Common Rail 0P0ID 353 kW (480 PS) rated engine power Retarder 35 Multifunction steering wheel adjustable in height and tilt, MAN Climatronic air conditioning, air-suspended driver's comfort seat with lumbar support, shoulder adjustment Differential locks on driven rear axles 12-speed gearbox MAN TipMatic Aero package Efficientline package Electronic braking system EBS Brake assistant Adaptive cruise control: EfficientCruise 3 Automatic headlights: with light sensor Lane change assistant Hill start assist: MAN EasyStart Efficientroll High beam assistant Headlight cleaning. Headlight range adjustment Rain sensor Fog lights Tinted glazing: tinted door windows, tinted and heated laminated safety glass windshield LED daytime running lights Cornering light: LED light sensor Roof hatch: electric glass roof hatch with darkening and mosquito net Roof spoiler: 600 mm Electric and heated exterior mirrors Rear differential lock Twin tires: on rear axle Driver airbag: with seat belt tensioner Retarder: Ecotarder Electronic stability program ESP Traction control ASR Anti-lock braking system ABS Curb mirror electric and heated Tire pressure monitoring system TPM Immobilizer: electric Underrun protection: front Telematics system: MAN Telematics Hjdpfx Asvm Inkemyor

Condition: used, maximum load weight: 28,598 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2012, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,770 mm, loading space volume: 94 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2012, Equipment: ABS, 3 - Axle Schmitz Cargobull SCS 24/L-13.62 EB VIN: 3162835 Hsdpfxoygzqve Amyjr Chassis / Components: * Air suspension // Raise and lower * Lift axle * Jost support legs * 3 x Rotos axle with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front approx. 0/10% Rear approx. 30% Middle approx. 50% * Pallet box * LBW Bär * Load capacity 2,000 kg Superstructure: * Tautliner * Certificate EN 12642 Code XL * VDI 2700 * Pallet stop on both sides * Edscha * Side curtains * Aluminum slats * Multilock * RSAB = Roof Safety Air Bag Weights: * Gross vehicle weight: 36,000 kg * Tare weight: 7,402 kg * Payload: 28,598 kg Other: * German vehicle * 1 previous owner * New inspection (HU) upon request ---- New main inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer registration plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. All rights reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Daily permits / export registration plates We will gladly help you obtain export registration plates / short-term registration plates.