Used Book Case Rounding Machine for sale (67,072)

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical specifications: - Bending and rolling processes performed manually, - Max. working width: 1020 mm - Max. material thickness (St 40): 1.25 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of the upper die: approx. 85 mm Bsdpfxjf S Tg Tj Al Rjwr - Max. adjustability of the bending die: 20 mm - Shaft diameter: 55 mm - Upper shaft can be pivoted outwards - Rear shaft can be adjusted parallel and at an angle - Space requirement: approx. W 1500 x H 1400 x D 750 mm - Weight: approx. 400 kg

Condition: new, Year of construction: 2026, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, overall weight: 4,900 kg, total length: 4,050 mm, total width: 1,550 mm, total height: 1,470 mm, input voltage: 400 V, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, - 4 rolls - Capacity 2070 x 10 - Bending capacity 2070 x 8 - Hardened rollers - Diameter above roller 220 mm - Diameter under the roll 220 mm - Side roller diameter 180 mm - Hydraulic - Digital display for the left roller movement - Digital display for the movement of the lower middle roller - Digital display for the movement of the right-hand roller - The top roller can be folded out hydraulically - Steel construction ST-52 - Hydraulic drop end for easy roller positioning - Hydraulic up and down movement system with center and side rollers - Hydraulic balancing system - Overload protection - Documentation - 400V Bodpju Evqhefx Al Rjwr

Condition: new, Table for hard cover making 1050×740 The device is brand new, with a 12 month warranty. European production, based on brand-name components. Work cycle: The operator manually hands the covering material to a gluing device in which the animal glue is automatically applied (working temperature 60-70’C). The covering material sheet with the glue applied, the operator places it manually on the stage, then manually adds the cardboard and joint board sheets. The operator prepares the pre-prepared cover manually to the device in which the top and bottom of the covering material are wrapped up and glued (patented brush system). During the sizing operation, the cover is pressed through the arrangement of the guide rollers. Covers leaving the device are immediately suitable for further processing The machine is equipped with: – A gluing machine applying glue to the top of the sheet – table with a suction Bwedeu Umbyjpfx Al Rjr – fixing elements for covering material and cardboard – a module for wrapping the cover – receiving table Technical data: Max format: 1050x740mm Min format: 140x140mm Capacity: 100-150 covers / h Thickness of the layer: 80-170 gsm Thickness of cardboard: 1-4mm Wrap up: 13-20mm Temperature of the adhesive: 30-100 ‚C Capacity of the bender: 2-3kg Smooth speed control of rollers and brushes Types of veneer material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1600x1800x1000mm Power supply: 380V Power consumption: 3.7kW Weight: 300kg We invite you to tests to our headquarters Machines are available from stock.

Condition: good (used), Zechini Angolar M automatic corner cutter Bedpsvac Tnjfx Al Rewr Production Italy. Perfect condition. This is a professional, production device for rounding corners and for cutting corners for hardcover. A solid cast iron construction, strong pressure ensure precise operation. Replaceable knives (7mm radius knife included) Adjustable margins. Stack height 50mm Weight 110kg Efficiency 40 cycles/min Power supply 400V This is the currently produced model.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Bjdpfewud Tkox Al Rewr Power supply 380 V + compressed air.

Condition: good (used), Horizon HCB-2 semi-automatic machine for producing hardcover books The machine is in very good condition, little used. The task of the machine is to produce a finished cover, assemble the book block into the cover and joint forming in the finished book. The machine is very easy to set up, operate and service. The machine is equipped with the following elements: touch control monitor table for mounting the cover with a laser pointer module for wrapping veneer edges ironing rollers barcode scanner Technical data: – cover size: max. 680.6×340.8mm; min. 322.4 x 169.7 mm – spine thickness: min. 3mm; max. 25mm – cover weight range: 105 – 160 g/m2 Bwedju Umbaspfx Al Rsr – speed: max. 150 cycles/hour – dimensions: 1,800 x 1,050 x 1,536mm – weight: 456kg Power supply: 230 V / 50 Hz instruction manual included and a large set of materials. Ask About The Product

Condition: good (used), Hang PiccoStar 102-50 eyeletting machine Bwedpsu Umavefx Al Rjr The device is in perfect condition, ready to work. Technical data: 1 eyeletting head (eyelet hole diameter 5.5mm, outer flange 8mm) Power supply 230V Frontal and side margins Push-button operation. The device punches holes and crimps the eyelet in one pass. Automatic eyelet feeding.

Year of construction: 2019, condition: new, SEMIAUTOMATIC BOOK COVER POSITION MACHINE LJ308A -new machine Bjdpfxjfdzwyj Al Rswr

Condition: new, Year of construction: 2025, HEAD CORNER ROUNDING MACHINE MAGRAF RA-1 Bodekx Hp Ejpfx Al Rswr

Condition: new, Year of construction: 2026, The rounding machines in design are based on former Oswald princip with a lot of new features. The machines are build modular und can be delivered in different sizes and with different options. The machine is available as single head or double head machine. Depending on the number of heads the machine can work up to 35 m/min, with speed control system even higher. The machines are available as model series with a total range from 30 up to 400 mm. Bwsdpfjfw Ay Nsx Al Rsr RM 30 – 120, RM 40 – 160, RM 80 – 200, RM 100 – 300, RM 160 – 350, RM 160 – 400 The rounding machines haf a lot of new features. All feed wheel pairs are opening and closed by valve cluster no mechanical dimension adjustment is needed. The rounding machine control is done by movable switch cabinet and control box for pressure regulation of segments of fedd rollers. The motors will be start by softstarter. For smoother surface condition or faster feed speed the machining heads are turning with higher speed. A control system is available for automatic speed control, depending on differenc between final log size and incomming log dimension. For save operation all doors are secured with electrical holder. To open the door the machine has to be stopped. This is needed to fulfill the high expectation of the the machine safety for secure operation.

Condition: used, Profile ring bending machine with manual crank drive, year of construction approx. 1950 Lower rollers Ø 56 mm with grippy knurling Bedpexbtx Hofx Al Rswr Lower roller width: 115 mm Upper roller Ø 100 mm Upper roller width: 110 mm - Symmetrical roller arrangement with 2 driven lower rollers - Upper roller adjustment 55 mm via threaded spindle - Manual crank drive with 6:1 gear ratio Required space (L x W x H): 440 x 660 x 1000 mm Weight: approx. 200 kg

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Bodpfxet Akt Re Al Rowr Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bodpfx Aowwt Ddol Rswr Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Bwsdsgd T R Dopfx Al Ror Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 680971, BT 610 conveyor belt feeder 500, RHE 622, EP 680, 1x AS 620 heating section, 1x WR 630, Conveyor belt 2800 mm to Diamant, Automatic book block control, Head and tail band station, IR heating for book rounding, Rounding and pressing station, One glue and gauzing station, One glue and combined head and tail band backside glue station, Two automatic preheater systems for gauzing and capital stations, Pressing station, Long hard cover conveyor belt Bwsdpfox Ryqdex Al Ror

Condition: new, Year of construction: 2026, max. working width: 1330 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 18 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. machine thickness servo adjustment precision: 0,01 mm Length: 4200 mm Bwsdjygx A Ajpfx Al Rjr Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Electrical connected load: 89 kW Standard configuration Machine configuration:1st station: Sanding belt2nd station: Brush elementsOptional 3rd station: Sanding belt or polishing station Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Machine with wet vacuum cleaner Extended machine accessories

Condition: used, Year of construction: 2000, functionality: fully functional, Smyth Sewing Machine 160 Maximum Mechanical Speed: 10,800 cycles/hour Min. Signature Size: 80 x 135 mm (off-line) Max. Signature Size: 320 x 420 mm (off-line) Number of Sewing Stitches: 8 Bwjdpfoxzzrusx Al Rsr Sewing Stitch Length: 24 mm Power Consumption: 4 kW Standard Voltage: 400V–50Hz, 3Ph Max. Air Consumption: 200 Nl/min at 6 bar Total Weight: 2500 Kg Machine Dimensions (L x W x H): 1.7 x 2.67 x 1.7 mt

Condition: used, Year of construction: 1982, Kolbus DA 780 Automatic case maker with hard cover Production speed: ~25–35 cycles per minute Case size range: Approx. 140 × 200 mm – 670 × 390 mm Board thickness: 1–4 mm Spine width: 6–80 mm (adjustable) Cover material: Paper, cloth, or coated materials suitable for cold glue Glue type: Cold (dispersion) glue; hot-melt optional retrofit Drive power: ~3–5 kW Bwsdpfx Asxz D Ncsl Ror Machine weight: ~2.5 – 3 tons

Condition: ready for operation (used), Year of construction: 1984, BOOK SEWING MACHINE SMYTH + HEADOP MODEL 55 -Automatic book sewing machine model 55, Year 1984 -Headop feeder, max size : 550X320 mm, min size : 150 x 80 mm. Bodpsyk Epqefx Al Rjwr -Max mechanical speed: 125 signatures per minute -6+1 -Complete with manuals, external air pump, repairs and accessories -Available immediately

Condition: ready for operation (used), Kolbus DA36, age 1985 Equipped with: - automatic feeding covering material - automatic feeding hard spine insert and side boards - automatic soft spine insert feeding from roll - hot-melt glue Bwjdjylbgbspfx Al Rsr - speed max 36 Cycles/min - size max 560x405 mm - size min 155x110 mm

Condition: used, Year of construction: 2015, Perfecta Bookline Plus Perfect Binding Machine Number of Clamps: 5 clamps Glazing unit Mechanical Speed: Up to 2,000 cycles/hour (or approximately 1,800 books/hour depending on configuration) Max Book Size (WxH): 430 x 320 mm (approx. 16.9 x 12.6 inches) Bwsdpfexz A Tmjx Al Ror Min Book Size (WxH): 110 x 105 mm (approx. 4.3 x 4.1 inches) Book Thickness (Spine): 6 – 80 mm Control Interface: Color touchscreen monitor with Navigator SE UI for motorized/automatic settings Feeding: Hand feeding station with jogger; automatic cover feeder (top-loading) with scoring Spine Preparation: Milling and roughening station with dust extraction system Counter: 5 mios

Condition: used, VEB Polygraph 882/2-18 gathering machine Bedox Ab Ncjpfx Al Rewr 18 gathering stations Features suction feeding 3-phase power, requiring 2-10 kW of power consumption at 440 V

Condition: excellent (used), functionality: fully functional, machine/vehicle number: S8758, A machine for gluing cardboard books. Gluing is done using 16 heads. This allows selective application of glue where it is needed. Ideal for gluing board books with flaps, board books with puzzles Bwsdpfewhc U Tsx Al Rsr

Condition: excellent (used), designed for the production of half-rounds /roll borders/ from waste wood, e.g., wood offcuts. max material height: 31 mm max material width: 62 mm Bsdpfx Aoxz Ui Tel Rowr

Condition: ready for operation (used), Consisting of: full tools, books and accessories available Technical Data Working range Bwjdpfxjq Aufqj Al Rer -base machine with electric equipment -in feed unit, MR -book bloc in feed with splitter -gluing unit -pre-heater and heated rounding unit -paternoster with press on unit -belt delivery 370mm x 270mm x 80mm max 125mm x 100mm x 6mm min 14 – 36 cycles per minute