Used Automatic Swing Bending Machine - 4 Mm for sale (119,184)

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR Bsdpjtrd T Tjfx Afmowp 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: used, Year of construction: 2021, Stamping Press Manufacturer: Bruderer AG, CH-9320 Frasnacht, Switzerland Type: BSTA 1600-181 Serial number / Commission: 14073 Year of manufacture: 2021 Press force: 1,600 kN (160 tons) Press control type: B2 Connected load: 99 kVA Supply voltage: 400 V / 50 Hz Pneumatic connection: 7–10 bar Clutch and brake system pressure: 4.3–5.8 bar Max. stopping time: 250 ms Total weight: 33,020 kg Control panel: Bruderer touchscreen HMI Secondary display: Nidec / SYS PCS 100-P-C Sound-insulating enclosure (red/orange) Tool stroke counter: 11,983,110 (as displayed) UVV safety inspection by Bruderer: September 2025 – no defects found Bodpfx Afozil Tromewp Strip Feeding Line Manufacturer: Kohler Maschinenbau GmbH, Lahr, Germany Type: BZA ABH 2000.2H – KRS 18.260/19 – BF1 Machine number: 41000 Year of manufacture: 2021 Connected load: 10 kW Supply voltage: 400 V, 50 Hz Feed type: BBV 300 Motorized decoiler with yellow safety enclosure

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Bodpfx Ajzil S Iefmswp Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Serial number: 4343 Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Bed opening: 1,120 x 400 mm Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Max. strokes/min: up to 1,000 (feed-dependent) Accessories Kohler unwinder Heспо straightener Bjdpfszil Sujx Afmjwp SYS PHS 5000 Sound-insulating enclosure (orange)

Condition: new, sheet thickness: 45upper roll diameter: 460prebending: 35sheet length: 2600Bottom Roll Diameter: 420Side Roll: 360messurements (LxWxH): 5770 x 2300 x 2585weight approx.: 28500motor: 30 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) Bsdped Ab Rhefx Afmowp - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 12.500,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, Year of construction: 2004, Overview: Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: - Manufacturer: Dr. Datz Maschinenbau GmbH - Type: BVM 24R - Year of Manufacture: 2004 - Number of Capping Stations: 24 Bwodpeyb R Rnsfx Afmop - Closure Type: Wire bail closures - Machine Direction: Left to right

Condition: new, pressure 100 kN stroke 0-200 mm table-size 450 x 1000 mm working speed: 6-10 mm/ sec. Bjdpfezh N Uksx Afmswp return speed 20 mm/sec work height max. 900 mm toolpiece height max. 200 mm total power requirement 1,5 kW bending capacity max. - round 42x3,2 mm 150x10 mm weight 320 kg dimensions 1010x480x1120 mm

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400 V weight 395 kg Bjdpfx Afsy H N I Domewp Overall size 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used

Condition: new, 50 mm Bedpfx Afey H N Hmsmowp 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x800x1500 mm weight 450 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 95 mm Shaft diameter 30 mm Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) Bwedpfsyv N A Hex Afmjp - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, 300 kN stroke length max. 235 mm 200x24 mm bending capacity max. - round 60x4,0 mm toolpiece height max. 250 mm 660x1250 mm work height max. 900 mm return speed 20 mm/sec working feed 10 mm/sec total power requirement 3 kW weight 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) Bsdpfx Afoyv I Tdemswp - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven Bwsdpfx Ajyvvpyofmop - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, Year of construction: 2019, sheet width 1050 mm plate thickness 4,0 mm roll diameter 110 mm total power requirement 2,2 kw Bwodjzh N Uwopfx Afmjp

Condition: new, engine 2,8 KW weight of the machine ca. 320 kg Bwsdpfxey H N Nzj Afmep dimensions of the machine ca. 86 x 90 x 85 cm

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm Bwodpfoyvvrhsx Afmsp roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm Bodeyvvnispfx Afmswp roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Bwedpfjzh I Iijx Afmop Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit Bwjdpfx Asbahd Ejfmsp cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm

Condition: used, machine/vehicle number: 007803, Max. panel width: 3200 mm Bodpfx Aoyhbhwsfmowp Max. panel length: 1000 mm No of Bottom Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: good (used), Year of construction: 2004, functionality: fully functional, NATGRAPH UV DRYER Bedpfx Afsy Twkmjmewp Automatic Stacker: NATGRAPH Raised Fully Cleaned

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length Bwedpfxsu Ibuks Afmjp - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts *

Condition: excellent (used), Year of construction: 2005, saw blade diameter 360 / 400 / 425 mm cutting diameter 10 - 140 mm Bjdevzt Eqepfx Afmswp cutting speed 8 - 150 m/min required cooling water max. 40 l/min height of material-table 950 mm max. travel between columns 680 mm control Siemens Simatic total power requirement 28 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: new, Drilling and Milling Machine OPTIMUM OPTImill MB 4 - Exhibition Machine - This offer is for an equipment package. The following items and options are already included in the price: - Drilling and milling machine OPTImill MB 4 Optimum Bwsdpfxou R Tftj Afmep - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Bsdjxnm Rcopfx Afmswp Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Bwodpfxeu R S Nwj Afmop Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use