Used Aba Ffu1000/50 for sale (33,331)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, load capacity: 5,000 kg, lifting height: 1,620 mm, free lift: 1,620 mm, fuel type: gas, mast type: triplex, construction height: 2,500 mm, TECHNICAL DETAILS Load capacity: 5,000 kg Lift height: 1,620 mm Free lift: 1,620 mm Overall height: 2,500 mm Fork length: 2,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Fuel type: Gas Battery voltage: 12 V Gbedpfey Iwpfox An Rsl Total power requirement: 56 kW Operating hours: 8,823 h Weight: 7,024 kg EQUIPMENT Full cab with heater 3rd + 4th valve Side shifter Fork positioner Work lights front and rear 4x SE tyres Double bottle holder Panoramic mirror

Condition: ready for operation (used), * Brand: dbr Fördertechnik * Surface: 5000 x 2000 mm – 1 deck. * Driving: E-motor 15 kW * Incl.: springs and springsupport. Gbedpfx Aey R Rvwon Rsl * Stock: 1 piece.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced Gbodoy R Npispfx An Rsl All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Gsdpfx Ajy R Npcsn Rjbl Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 50 mm throat 350 mm bore stroke 180 mm thread capacity 35 M spindle taper MT 4 MK Gedpfewp Tnmex An Rjbl column diameter 150 mm bore spindle turning speed range 132-1852 U/min table-size 480x480 mm

Condition: new, Year of construction: 2023, 50 mm 1250 mm Gbedpfx Aswp S U Ssn Rsl 1345 - MK 5 bore depth 270 mm spindle turning speed range 56-1450 U/min

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 50 mm Gbjdswp Tn Tepfx An Rjl throat 350 mm bore stroke 180 mm thread capacity 35 M spindle taper MT 4 MK column diameter 150 mm bore spindle turning speed range 93-1420 U/min table-size 480x480 mm

Condition: new, Year of construction: 2026, bore capacity in steel (diameter) 50 mm throat 350 mm bore stroke 180 mm Gbodpfx Aoygm Sxon Rsl thread capacity 35 M spindle taper MT 4 MK column diameter 150 mm bore spindle turning speed range 132-1852 U/min table-size 480x480 mm

Condition: good (used), Year of construction: 1998, pressure 50 t chamfer lenght 1200 mm distance between columns 1050 mm Stroke beam 100 mm max. opening beam/table 370 mm C-recess 320 mm max travel X-axes 400 mm R1 and R2 axis controlled by cnc 100 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 80 mm/sec Number of working hours 24000 h length 1600 mm width 1200 mm height 2000 mm weight 2650 kg total power requirement 2,5 kW dimensions of the machine ca. 2x1,5x2 m Godpfx Aey R Egwen Rsbl All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, total height: 3,590 mm, table load: 1,814 kg, overall weight: 16,914 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, tool weight: 13,600 g, product length (max.): 7,320 mm, number of axes: 3, This 3-axis HAAS VF 11/50 was manufactured in 2011. It features a robust CNC control, a large table surface of 3048 × 711 mm, and can handle a maximum load of 1814 kg. With X, Y, Z travels of 3048 mm, 1016 mm, and 762 mm respectively, it offers extensive working range. The spindle can reach up to 7500 rpm, and it includes a 30+1 random tool changer. Consider the opportunity to buy this HAAS VF 11/50 vertical machining centre. Contact us for more information. • Table Surface: 3048 × 711 mm • Table Height from Floor: 850 mm • Working Acceleration: 9.1 m/min – 15.2 m/min • Tool Change Type: Random 30+1 • Magazine Positions: 254 mm Gedex D Imqepfx An Robl • Maximum Diameter with Adjacent/Alternate Tools: 102 mm – 254 mm • Maximum Tool Length: 406 mm

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPA III 50 650/140 Catalogue number: 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum workpiece width: 700 mm - Working width of shaft with saw blades: 650 mm - Maximum saw blade diameter: 400 mm - Arbor hole diameter: 70 mm From above: - Kickback pawls - 2 driven, toothed feed rollers From below: - Kickback pawls - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Stepless feed speed adjustment with inverter - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Made in Poland – Used machine, in very good condition Godpfx Anoy R Dpqo Rjbl Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to significant exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for identification and informational purposes. We only resell products that have been previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control – TOP Condition Technical Data: >> Year of manufacture: 2006 >> Control: Heidenhain iTNC 530 >> Travel (X/Y/Z): 500 / 450 / 400 mm >> C-axis: 360 degrees >> B-axis: 0 to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feed rate steplessly programmable in X, Y, Z: up to 20,000 mm/min C and B axes steplessly programmable up to rapid traverse speed >> Rapid traverse Y/Z axes: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: double gripper, 60 tool positions >> Clamping surface: Ø 500 x 380 mm Distance between T-slots: 63 / 14H7 >> Table load: 200 kg >> Dimensions and weight (approx.): Machine without control panel and accessories Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Electronic handwheel: Heidenhain HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> High-pressure coolant supply (IKZ) 40 bar >> Coolant purification system (fleece filter system) >> Rinse gun >> Visiport >> Measuring system with air purge >> Prepared for robot loading >> 3D probe Heidenhain TS640 Gbjdpfx Aoy R Dgpjn Rol >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control >> Complete documentation The following works have been carried out: >> Main spindle completely overhauled >> Complete maintenance: all cooling and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers etc. fully cleaned. >> Geometrically measured (acceptance protocol available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in excellent condition. The main spindle has been overhauled (exchange spindle), fully serviced, and an acceptance protocol is available. Invoices for the overhaul totaling €42,000 (net) are available. You are welcome to view and test the machine under power at our premises.

Condition: good (used), Year of construction: 1994, Manufacturer: ZANCHETTA Machine type: GV 50 Rotomix Year of manufacture: 1994 Capacity:50 liter Minimal operating capacity: 12 liter Maximal operating capacity: 33 liter Inside depth: 450mm Inside height: 320mm Weight: 850 kg Parts of machinery: 1.Roto mixer Granulator Gbjdpfx Ansnp Hrqo Rel 2.Oil dynamic unit 3.Vacuum / condensation unit 4.Heating unit

Condition: good (used), Year of construction: 2018, operating hours: 4,548 h, load capacity: 5,000 kg, lifting height: 4,080 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, empty load weight: 7,500 kg, mileage: 4,548 km, Electric duplex forklift Brand: Still (Germany) Year of manufacture: 2018 Capacity: 5,000 kg Lifting height: 4,080 mm Overall height: 2,850 mm Equipped with sideshift Equipped with fork spreader 4,548 operating hours Fork length: 2,200 mm Battery from 2018 with external charger Gbsdey R Akmopfx An Rsl

Condition: good (used), Year of construction: 2020, operating hours: 6,839 h, load capacity: 5,000 kg, lifting height: 6,280 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, empty load weight: 8,000 kg, mileage: 6,839 km, Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2020 Capacity: 5,000 kg Lifting height of 6,280 mm Passage height 3,000 mm Equipped with: FREELIFT, SIDESHIFT, and FORK SPREADER 6,839 operating hours Battery Automatic filling system with external charger Watch the video on YouTube Gsdpfxey R Admj An Rjbl

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Gsdpow Hanhefx An Rjbl Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Manufacturer: Schanbacher Godpfxsx Dblto An Rjbl Type: S3-50 Year: 2012 Dimensions: 460 × 600 × 1260 mm Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system

Condition: good (used), Beading machine, flanging machine, seam closing machine, motorized beading machine -Max. sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Protrusion: 50 mm -Dimensions: 900/800/H1100 mm -Weight: 250 kg Gjdpsb A Ncrofx An Rsbl

Condition: used, Year of construction: 1991, Used capping machine BERTOLASO Aluminium screw up to 1200 bph The Bertolaso aluminium capper clearly meets the needs of bottling with aluminum caps. Moreover, technicians overhauled this model in 2008 and adapted it for Stelvin capping, thereby ensuring reliability and versatility. Technical specifications The machine effectively uses one capping head to operate with aluminum screw caps. Furthermore, the system performs a clockwise rotational movement to ensure a uniform and precise capping process. Consequently, it processes 1200 bottles per hour, making it an ideal solution for small and medium productions. The compact dimensions of the machine, measuring 1200 mm in length, 900 mm in width, and 1200 mm in height, therefore enable easy integration into existing production lines. Additionally, its weight of 0 kg provides a stable and durable structure suitable for intensive use. Safety and maintenance Integrated safety features undoubtedly protect operators during use. Thus, these systems keep the machine compliant with modern industrial safety standards. Besides, the modular design and availability of original Bertolaso components simplify regular maintenance. Efficiency and adaptability This machine, ready for use, optimizes production times while maintaining a high level of capping precision. Moreover, the adaptation for Stelvin caps satisfies current market demands and, as a result, offers greater flexibility compared to the original model. Gbsdpfxevgva Ij An Rsl Applications The Bertolaso screw capping machine efficiently serves various industrial sectors, including wine, food, and beverage industries. Consequently, its versatility and high performance provide an optimal choice for companies requiring a reliable and efficient machine for aluminum cap closures. Conclusion The VB 40 V 22 model delivers robustness, efficiency, and safety. Furthermore, it caps 1200 bottles per hour and adapts for Stelvin capping, thus making it a highly competitive solution for companies of various sizes. Consequently, Bertolaso reliability and compliance with safety standards make this machine a valuable investment in the bottling sector.

Condition: used, Year of construction: 2001, Used Filling Monoblock RIVI 50-60-12 12000 bph Technical Features and Operating Details of the Used RIVI Filling Monoblock  The Used Filling Monoblock RIVI 50-60-12 12000 bph delivers high efficiency and operational reliability through its integrated bottling system. RIVI manufactured this machine in 2001, combining rinsing, filling, and capping functions into a single unit that optimizes both space and production time. Consequently, the Used RIVI Filling Monoblock suits companies aiming to enhance their bottling operations seamlessly. Godpfx Anevxum De Rjbl Monoblock Specifications and Bottle Formats The 50-60-12 model processes PET bottles with diameters between 50 and 95 mm and heights ranging from 150 to 340 mm. Additionally, it supports formats of 1.5 L, 0.7 L, and 0.5 L, enhancing flexibility for various production needs. Furthermore, it achieves a production rate of 12,000 bottles per hour, making it ideal for medium- to high-capacity production lines. The machine measures 5370 mm in length, 4070 mm in width, and 3000 mm in height, and weighs 20,000 kg. Moreover, the system rotates clockwise, which ensures continuous and uninterrupted production flow. Rinsing Section In this section of he Used RIVI Filling Monoblock, 50 grippers firmly hold bottles by the neck, stabilizing them during the rinsing process. Each bottle receives a single treatment, during which filtered water or a sanitizing solution removes dust and residues. In addition, the synchronized rotation system ensures that the rinse covers all areas uniformly, while the controlled drainage system effectively prevents liquid buildup and contamination. As a result, this process thoroughly prepares the bottles to receive the product without compromising quality. Filling Section The machine uses a gravity light depression filling system, which is ideal for non-carbonated liquids such as still water. However, it also efficiently fills sparkling water by maintaining gentle pressure control, ensuring minimal gas loss. With the proper modifications, it can handle certain types of soft drinks, making it versatile for a variety of production needs. The system employs 60 dedicated filling valves, allowing precise product flow while avoiding foaming or turbulence. Sensors continuously monitor and regulate the fill level, ensuring consistent quality even at high speeds. Capping Section The capping section relies on 12 heads to securely apply plastic screw caps. The machine includes an automatic cap feeder, with a hopper capacity of 10,000 to 13,000 caps, supporting Neck 1881, low thread, and sport caps. First, the system automatically feeds and positions the caps above the bottles. Then, each head screws the caps on with the correct torque, creating a tight, hermetic seal that preserves both gas and product freshness. Additionally, integrated sensors detect improper tightening and immediately report any errors. Therefore, the system reduces waste while guaranteeing reliable sealing and operational efficiency.

Condition: ready for operation (used), Centrifugal pump, vertical centrifugal pump, pump, Andritz 13.7 kW, Used machine Gbsdpfx Anewmb Ebs Rjl Manufacturer: Andritz Type: HP 50-180.1/2/S Electrical data: 400V; 27A; 13,7kW Flow rate: 42 m³/h Head: 80 m Year of manufacture: 2013 Overall dimensions: Length: 380 mm Width: 350 mm Height: 1080 mm

Condition: ready for operation (used), Centrifugal pump, vertical centrifugal pump, pump, Andritz 13,9 kW, Used machine Manufacturer: Andritz Type: HP 50-180.1/2/S.15/2 Electrical data: 400V; 27A; 15kW Flow rate: 42 m³/h Godpov Dr Hfsfx An Rjbl Head: 80 m Year of manufacture: 2015 Overall dimensions: Length: 380 mm Width: 350 mm Height: 1080 mm

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min rapid traverse in all axes 10 m/min quill stroke 80 mm Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. - CNC path control GRUNDIG Dialog 11 - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm - Horizontal milling device - Full protection cabin - Ball screw spindles in all 3-axes Gjdpjhhuf Hefx An Robl - Coolant system - Bele

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Manufacturer: Farrel Type: 50x14 CNC Control: NUM 760 Year of construction: 1970 Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Fixed steady rest 2 x Stones and Flanches included Specifications Metric US Standard Center height 647 mm Grinding diameter Ø 1295 mm Grinding length Gbedpfxev Dia Ae An Rel 4267 mm Grinding stone dimensions 914 x 152 mm mm Grinding stone speed 400 - 1200 Rpm Coolant system Yes Dimensions (estimate) Length 8500 mm Width 4500 mm Height 3200 mm Weight 78000 kg Please note: The information on this page is believed to be correct and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they will not constitute a representation and contractual terms. We recommend that you review all important details.

Condition: good (used), Year of construction: 2015, Metal cutting Tooling TOS - HUR 50 MACH-ID 2923 Make: TOS Godpfxswvht Re An Robl Type: HUR 50 Year: 2015