Used 2 Stück Thermo Fisher Scientific Heracell 150 I for sale (102,894)

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer cross-gluing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Ljdpfx Aoumrf Aebzoag Connection power 22 kW Compressed air 6 bar Glue types PVA or UREA based

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Lasdpfxevtpdge Abzjg Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. Laodpfer Ix Igjx Abzog 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: good (used), Year of construction: 2009, KUKA KR 210 L150-2 2000 6-Axis Robot The KUKA KR 210 L150-2 2000 (Series 2000) is a high-performance 6-axis industrial robot specifically designed for extended reach combined with a high payload capacity. The "L150" designation indicates the extended arm (Long version), which increases the maximum reach to 3,100 mm, while the rated payload is 150 kg. Key Technical Data Maximum reach: 3,100 mm Rated payload: 150 kg Supplementary load (arm/link arm): 50 kg / 100 kg Number of axes: 6 Repeatability: ± 0.06 mm Weight (excluding controller): approx. 1,285 kg Protection rating: IP65 (standard) Mounting position: Floor Axis Data (Motion Range & Speed) The Series 2000 features high-torque drives that ensure high dynamic performance despite the extended arm length: Axis 1 (A1): ±185° | Max. speed: 86°/s Axis 2 (A2): +90° to -61° | Max. speed: 84°/s Axis 3 (A3): +65° to -209° | Max. speed: 81°/s Axis 4 (A4): ±350° | Max. speed: 100°/s Axis 5 (A5): ±125° | Max. speed: 110°/s Axis 6 (A6): ±350° | Max. speed: 184°/s Typical applications Thanks to its large working envelope and load capacity, the manipulator is ideally suited for: Long-range material handling and palletizing tasks. Milling and machining applications (e.g., component trimming). Spot welding and handling in automotive production. Additive manufacturing and large-scale 3D printing. "A complete solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Ljdpfx Abjzcwxuozeag Find more items—both new and used—in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2010, operating hours: 170 h, fuel type: electric, Manitou 150 AETJL Bi Energy Articulating Boom Lift / Work Platform 2015, 15.40M Working Height Video can be sent via Whatsapp. Continuous stock, see website. Prices are ex Nuland. Laedpoy Dfy Rjfx Abzog Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2006, functionality: fully functional, CUTMASTER Fisher + Rückle AFD-35/2600 is an industrial, heavy-duty double-blade longitudinal veneer guillotine. Tech. data Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Double-blade Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Lsdpfoy Tm Tksx Abzoag Weight 3.800 kg CE marking Total connection 10 kW

Condition: used, This listing is for the Peak Scientific Corona Nitrogen Generator 1010 paired with the Corona Air Compressor. The unit is in full working condition and is ready for immediate release. Laedpsxwc Iisfx Abzeg System Details: The Peak Scientific Corona Nitrogen Generator 1010, paired with the Corona Air Compressor, is engineered to meet the demands of labs requiring high-purity nitrogen, specifically designed for applications like chromatography. The Corona 1010 is ideal for the Thermo Scientific Corona Veo Charged Aerosol Detector and is also suitable for LC, HPLC, and UHPLC applications, providing nitrogen flows up to 5 L/min at 80 psi. Key Features: Maximum Gas Flow: 5 L/min Maximum Output Pressure: 80 psi (5.5 bar) Maximum Purity:

Condition: good (used), Year of construction: 1995, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 315 mm, feed length Z-axis: 175 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 495 mm, feed rate X-axis: 9 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 50 rpm, quill travel distance: 175 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 9 m/min, rapid traverse Z-axis: 4 m/min, total width: 2,480 mm, total length: 1,620 mm, table width: 1,230 mm, table length: 410 mm, position of the milling head: vertikal, type of input current: AC, rotational speed (max.): 9,000 rpm, rotational speed (min.): 50 rpm, overall weight: 3,200 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, space requirement width: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 2,450 mm, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Due to restructuring measures, we are selling our CNC milling machine – Fehlmann Picomax 80 CNC 2/3 - robust Swiss precision machine - year of manufacture 1995 - low operating hours - very good condition considering its age Ljdpfxozzd Hhs Abzoag - Heidenhain 315B control system - 4 axes (X, Y, Z + A [rotary axis]) - axes can be moved in parallel - travel distances X700 x Y315 x Z170 (+W495) mm - table 1,320 x 410 mm - 4th axis (rotary axis) AT100 original Fehlmann with 140mm three-jaw chuck and collet chuck - manual control panel - spindle 50 – 9,000 rpm - complete steel sheet enclosure with safety glass - fully functional - complete operating and programming manual - spare parts and service available from Fehlmann - machine can be inspected while powered on Depending on the price, a wired measuring probe (Renishaw), an electric fine milling and grinding spindle from RAY (Switzerland) 10,000 - 40,000 rpm, and various tool holders can be included. This offer is subject to change. Subject to prior sale. No online sales. The sale is only to commercial customers after inspection and acceptance on site. Due to the age of the machine, the sale is made with the exclusion of any warranty. Pick-up only (EXW) - no shipping.

Condition: new, Siemens 6FC9320-2BC Resolver measuring device DM 2 / 150, gear ratio i = 1 : 5 100% functional. Lodpfxoi Ed Hke Abzoag

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 150 302, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm Laedpfx Abezrwypszog New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Ljdozrwzaspfx Abzsag Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143983 Ledovzxg Tjpfx Abzjag Serial number: 143983 The KUKA KRC4 linear axis is a high-precision and robust motion unit that is ideal for industrial applications. It ensures precise control of motion sequences and plays a central role in automation processes and robotic systems within production. Its stable construction ensures consistently reliable performance, even in the most demanding applications.

Condition: excellent (used), Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 60022, turning length: 250 mm, turning diameter: 42 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 150 mm, travel distance Y-axis: 385 mm, travel distance Z-axis: 250 mm, spindle motor power: 7,500 W, total height: 1,900 mm, total length: 3,500 mm, total width: 1,900 mm, overall weight: 4,200 kg, i-42 Ultimate lathe • Number of controlled axes: 10 • Number of driven tools: 12 • Max. diameter: 42 mm • Max. length: 250 mm Includes a feeder – max. length 1 m. Laodpfx Abozwmknozjg

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate working area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €7,900 + VAT For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and comes with a computer, fully configured for immediate operation. Its large working area of approximately 2,600 × 1,600 mm allows for the comfortable machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foams, rubbers, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube, and is also supplied with a brand new 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Included equipment The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate working area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. • Installed and functioning RECI 150 W laser tube. • Brand new RECI 150 W replacement laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. _____ Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) • Cardboard Laodpfx Abozmqa Eezjg • Leather • Rubber • Technical foams • Non-metallic plastics • Other materials compatible with CO₂ laser technology A purchase with guarantees The machine can be seen in operation before dismantling. The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment ready to continue producing from day one. _____ More than just a used machine It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). Lasdpsz Ad Dcofx Abzsg 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Lasdpfsgrzh Eox Abzjg Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, This listing is for 1 of 2 Scientific Industries SI-300X MultiMagstir Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. Four Position Multi Mag Stir Genie provides low to high speed stirring and editable memory profiles. Microprocessor controls offer precision and reproducibility. May be used with up to four 1 L flasks/beakers or three 1 L spinner flasks and a maximum sample weight of 10.0 Kg High and low speed range from 10-1200 rpm including reverse and interval stirring Lajdpfxsxx Arkj Abzeg Provides low to high speed stirring and editable memory profiles Low/Medium/High power levels available for various sample viscosity Uses microprocessor control for precise and reproducible operation Manual Mode provides stir, stir reverse, and time functions Profiles Mode allows users to quickly program speed, ramp rate, stir direction, time (including pause), and power level in up to 9 distinct steps Up to 4 stirring profiles can be saved Automatic Mode recalls and executes one of up to 4 user-defined profiles Stirring Positions 4 Display LCD (2 lines by 16 characters) Wattage 460 w Height (Metric) 48 mm Length (Metric) 375 mm Width (Metric) 325 mm

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Laedpfowtft Njx Abzsg Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades Lodpozulwzjfx Abzjag - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: used, Year of construction: 2023, functionality: fully functional, We are selling a bandsaw, Berg & Schmid GBS 242 DG HA-I, with a cutting speed of 25-90 m/min. The following equipment is included with the purchase: Ljdpfjz Dnq Hox Abzsag - Micro-spray system SET GBS 242, including spray nozzle, fluid reservoir, and 24V Plus mounting bracket. - Infeed roller conveyor, left side. - Infeed/outfeed adapter for URB 290/400, connection piece for the machine. - URB 290 universal roller conveyor, length 4000 mm. - Roller conveyor extension for miter angles up to 45°, extending to the left (infeed). - Outfeed roller conveyor, right side. - Infeed/outfeed adapter for URB 290/400, connection piece for the machine. - URB 290 universal roller conveyor, length 4000 mm. - Roller conveyor extension for miter angles up to 60°, extending to the right (infeed). - LM 55 DH/manual digital length stop, measuring length 4000 mm, including connection to the saw.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00676, load capacity: 150 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, ABB IRB 6700-150/3.20 manufactured in 2016.05. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6700-150/3.20 Model Number: IRB Year of Manufacture Robot: 2016.05 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 3200 Repeatability (mm): ±0.06 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1280   Laedpfez Af Rdjx Abzsg Controller: IRC5 Year of Manufacture Cabinet: 2016.05 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: excellent (used), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions Lsdpfszizhfox Abzeag Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m³ (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating Operation -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature stability: ±0.3 to 1.0 K (over time) Temperature stability: ±0.1 to 0.5 K (over time) Climatic Operation 10 to 90°C Humidity: 10...98% rH Temperature stability: ±0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Equipped with extra floor plates to increase floor load capacity Important safety information for buyers: The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2000, number of slots in tool magazine: 12, Equipment: chip conveyor, documentation/manual, Chiron FZ08W Magnum vertical machining center Sinumerik 840D control Ljdpfx Abszznm Eszeag Max spindle speed: 15,000 rpm X = 300 mm Y = 250 mm Z = 250 mm 2 x 4th axis Peiseler RT 100 Tool holder: HSK 32 ATC: 12 positions The machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I am offering a 3-month start-up warranty.

Condition: used, mileage: 343,000 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 07/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,900 mm, total width: 2,100 mm, total height: 3,100 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, * Iveco Daily 35 - 150 box body with tail lift - 3 seats - air conditioning - 2 units available - * Diesel - 2,998 cc - 110 kW - 150 hp - Euro 6 - Green emission sticker - TÜV * The 2nd Iveco is from 05/2019 and has 383,000 km - Price is per vehicle - * Auxiliary heater / radio / ABS / ASR - 6-speed manual transmission - Vehicles with lettering - * Vehicle dimensions: Length: 6,900 mm x Width: 2,100 mm x Height: 3,100 mm Laedpfey A Uz Iex Abzsg * German vehicles - German registration documents - Vehicles immediately available - * Vehicles show signs of use and have some optical defects * Subject to errors, printing mistakes, and prior sale * Please make an appointment for viewing & test drive * Contact person: Andreas Vogel Special equipment: Storage compartment on dashboard with USB connection, audio navigation system: CD player with MP3 capability, USB and Bluetooth hands-free kit, roof shelf with additional DIN compartment, vehicle key with remote control, rear axle suspension: reinforced parabolic (stage 2), 210 A alternator, A-pillar grab handle, comfort headrests in passenger compartment, fuel tank: 90 liters, spare wheel with road tires, spare wheel holder between longitudinal members, interior cargo area lighting switch, front mud flaps, cab seats: luxury driver’s seat Other features: Driver airbag, pre-wired for trailer socket, traction control (ASR), version: S-series, electrically adjustable and heated exterior mirrors, brake assist, electronic brake force distribution, front axle suspension: transverse leaf spring, tinted windscreen and side windows, speed limiter system 160 km/h, body/chassis: standard flatbed, instrument cluster with pixel matrix display, headlamp range adjustment, engine 3.0 L - 110 kW diesel, radio pre-installation with speakers, wheelbase 4,100 mm, low emissions according to Euro 6 standard, cab seats: double passenger seat with headrests, service indicator, gross vehicle weight 3.50 t

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 740703/01, passage width: 2,800 mm, input voltage: 400 V, type of input current: three-phase, The machine is fully operational and can be inspected during production while powered on. Also included in the sale is a Fisher + Rückle veneer parallel milling/gluing unit, capable of: edge milling with diamond tools automatic glue application preparation of veneer edges before splicing The complete line has been used in professional production and has been continuously maintained. Main advantages: Heavy-duty industrial Fisher + Rückle quality Very stable and precise operation Ledpfxszdiinj Abzsag Machine in good working condition Can be demonstrated during operation Parallel milling and glue application unit included Diamond tooling included Suitable for professional veneer production The machine is located in Denmark and can be inspected by appointment.