Used Bts-Mf75Mk Ballenpresse Waste Baler for sale (4,308)

Condition: used, Year of construction: 2026, Mixing rotors with block discs BS252 Fine screening - grain size 0 - 35/40 mm Blocks in the wear zones with armored wire welded on Adapter Likufix SW48 - not included in the price – available upon request Excavators from 24 t / wheel loaders from 13 t Hodpfx Aisz S E Sljtjfn Cutting width 1500 mm / 4 rotors Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil flow 150 - 200 l/min - Mixing in lime or mixing agents for drying the soil, mixing with compost, sand, other soils, etc. while simultaneously crushing soil clods. - Aerating, crushing, shredding, and turning biomass, organic waste, and compost while simultaneously separating branches, roots, etc. that cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete, while simultaneously separating fragments of mm, larger and harder parts remain in the separator. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.154 - the bearings are maintenance-free, and the chain housings contain grease that, due to the movement of the bucket and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSP.154 does not need to be re-lubricated and is maintenance-free. Dimensions and weight without adapter.

Condition: used, mileage: 208,850 km, power: 175 kW (237.93 HP), first registration: 11/2008, overall weight: 21,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 9,960 kg, empty load weight: 11,540 kg, wheelbase: 3,360 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 6,840 mm, total width: 2,550 mm, total height: 3,570 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, low noise, traction control, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3 Wheelbase: 3360 mm, Body: Faun sweeper Viajet 6R/HX, ABS, cruise control, traction control, central locking Hfedpfxjz Nqqzs Aitsn Faun sweeper body on a demountable platform, manual transmission, front axle, rear axle, differential lock front axle, differential lock front N1, front axle 9.0 t, rear axle H7 12.0 t, crown wheel 410, outer planetary axle M6, axle ratio i = 3.692, anti-lock braking system (ABS), heated air dryer, drum brakes front and rear, drum brake front/rear Z9, stabilizer rear axle under frame, bumper, steel design, steel bumper L8, deletion, rear underrun protection (EC), steering LS6/LS8, fastening parts on the frame/hole grid, frame head reinforced for special attachments, roof hatch/vent flap roof, PSM body and trailer CAN ISO 11992, additional socket 24V/15A, driver's cab railing, radio, initial parameterization PSM external, S-cab, FHS short BM 940.890 A1, S-cab 180 mm extended, rear wall extension FHS short A3, rear window C5, heated windshield, clear heated windshield C2, exterior sun visor transparent, sun visor K5, electric window lifter driver and passenger door, standard cab mounting, distributor cockpit, lockable compartment in storage above windshield, mirror on driver's side electrically adjustable, exterior mirror driver's side electrically adjustable G2, front mirror aerodynamic front, front mirror aerodynamic front E2, immobilizer, (transponder), transmission control hydraulic, transmission control, hydraulic W3, GTO 28-5/4.25-0.81, G 131-9 O9, transfer gearbox VG900-3W, pollen filter, pollen filter N2, wheel formula 4x4, series SKN-R, tipper chassis, leaf suspension, series SKN-R, design right-hand drive, right-hand steering X9, domestic Germany, wheelbase 3600 mm, 18.0-tonner, inline engine 6 cylinders, hydraulic fluid Pentosin CHF11S, speedometer km, combination instrument pixel matrix display, combination instrument display graphic capable I3, fuel tank lock, exhaust monitoring for nitrogen oxide (NOx), exhaust monitoring (NOX), V1, On-Board-Diagnosis 2 with NOx-Control, silencer SCR catalytic converter, small stainless steel, exhaust pipe raised behind cab variable, exhaust system raised behind FHS P8, AdBlue tank 35 l, AdBlue container plastic, main tank 300 l steel, plant Pekan, Pahang Malaysia (HICOM Automotive), chassis number, electrical system for body interior lighting, rear light holder right-hand drive/right-hand traffic, speed limitation 90 km/h EC, cruise control, air intake rear top air filter on frame, air intake rear top I5, Vmax 30 km/h switchable plus reverse lock waste disposal company, engine design Euro 5 (BlueTec), engine Euro 5 (BlueTec) O2, air compressor 2-cylinder, engine output rear torque 600 Nm, coupling elastic for engine output (loose), deletion tipper drive, GV ZB oil pump, ... ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. Hsdpfxsz S Iyre Aitjfn * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO ME Series mobile sand screening plant is an ideal solutions for the classifying materials which was provided as pre-crushed. Most important advantage of plant is having all equipment on only a single chassis. Transportation can be done by only one truck. TECHNICAL SPECIFICATIONS: - Hopper: 9 m3 - Plant Dimensions: 14130x4600x4160 mm - Production Capacity: 200-300 Tons Per Hour - Vibrating Screen and Deck: 2000x5000 (4 decks) - Total Motor Power: 65 Kw Hfedpfx Ajz S I N Hjiton - Generator (optional): 100 kvA ME-2050 IS A COMBINATION OF: • Bunker (Hopper) • High Stroke Vibrating Screen • Folding type feeding and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, functionality: fully functional, machine/vehicle number: WDB4371251W199327, mileage: 318,533 km, power: 177 kW (240.65 HP), first registration: 07/2002, fuel type: diesel, empty load weight: 7,300 kg, overall weight: 7,500 kg, tire size: 395/85 R 20, axle configuration: 4x4, brakes: engine braking, color: white, gearing type: mechanical, number of seats: 3, total length: 7,170 mm, total width: 2,410 mm, total height: 3,500 mm, permissible axle load (axle 1): 4,400 kg, permissible axle load (axle 2): 4,400 kg, Year of construction: 2001, operating hours: 4,765 h, Equipment: ABS, parking air conditioner, Unimog U1550L Expedition Vehicle First registration: 07/04/2002 Mileage: ≥ 318,000 km Operating hours: ≥ 4,700 h Total weight: 7,500-8,500 kg depending on load Engine: 176kW / 240 hp, Euro 2 Tires: 395/85 R 20 - Michelin Asking price: €139,800 Special equipment Unimog: A27 Double sealing of wheel hub, for use in muddy conditions A30 Tire pressure control system A31 Wheel-side, wheelbase-dependent parts for tire control B02 ABS B28 Mechanical quick-release device for spring storage cylinders C22 STABILIZER SEAL FRONT AND REAR Hodsz S Ni Ispfx Aitofn C34 Anti-slip coating on bumpers D65 Mounting parts for external superstructures E35 Circuit breaker instead of fuse F06 Higher cab roof (by 120mm) F44 ADDITIONAL VENTILATION F50 SOUND AND HEAT INSULATION FOR CAB G22 Auxiliary gearbox with off-road gear G50 Transmission oil cooler G73 SHIFTING DAMPER (SHIFT LEVER - TRANSMISSION) H02 Single-circuit hydraulic system H11 HYDRAULIC SYSTEM 1-CELL H71 HYDR. PLUG-IN CONNECTION FRONT 2-WAY, CELL 1 J24 Tachograph, 2 drivers, outside EU J29 Speed-dependent engine speed compensation (measurement result / warning sign) L02 Outline lights to the front, white L18 Fog lights, halogen, suitable for wading L25 Rear fog light L30 Stone guard grille for headlights L30 Headlight stone guard L35 Headlight beam adjustment L41 ADDITIONAL TURN SIGNALS L71 Side marker lights with integrated reflectors M02 EURO II ENGINE M03 Increased engine power M31 AIR COMPRESSOR WITH HIGHER OUTPUT M53 Fuel preheating M78 Engine number stamping M86 PULLEY AND VIBRATION DAMPER WITH COMBINATION RING M91 ELIMINATION OF START PILOT R27 Disc wheels 11x20 super S21 Three-point automatic safety belts S26 Windshield electrically heated, laminated glass S26 Electrically heated windshield, laminated glass S39 Power windows (left and right) S46 2 Outside rearview mirrors, heated, electrically adjustable S50 First-aid kit S82 Wide-angle mirror S83 Ramp mirror X18 Increased load capacity level UNICAT Expedition Mobile Superstructure: - Pneumatically sprung Recaro seats, adjustable, heated and ventilated - Robust GRP box body, wall thickness approx. 60–100 mm, waterproof and dustproof; designed for temperatures from -40 °C to +40 °C - Four-chamber fuel tank system with a total of 560 liters of diesel - Solar system on the roof and extensive on-board electrical system with a central control panel - 310 l fresh water tank, 80 l waste water tank, 22 l hot water boiler via heat exchanger and drinking water filter system - Kitchen with refrigerator, freezer, sink, hot and cold water, three-burner propane stove, oven and storage compartments - Sleeping area with a double bed, cabinets, mirror, reading light and storage space - Bench seat, can be converted into an additional sleeping space for a third person - Bathroom with porcelain toilet and flushing, washbasin, mirror cabinet and shower - Outside shower and outside water connection - Awning - Rear bicycle carrier, roof rack with spare wheel - Additional front headlights with protective grille - Winch at the front and rear - Ball hitch K50 Offer subject to change. Errors, changes and prior sale are reserved. All information without guarantee. Our general terms and conditions apply. Location: Peter Meineke GmbH Becklinger Straße 17 29683 Fallingbostel Viewings and/or test drives only by prior appointment. Please coordinate by telephone before arriving, as the vehicle/device may not be at the specified location. Contact: Ewgeni Schneider Mobile: +49 (0) 173 / 9903073

Year of construction: 2025, condition: new, machine/vehicle number: 100119-4, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips  Input material 0-200 mm  Capacity approx. 80 m³/h (material-dependent)  Material separation into 2 fractions: 0-25 mm and oversize  To be mounted on customer-supplied impact plates or a base frame Technical data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area 6.3 m², number of shafts 40 Hjdpjg I Uqijfx Aitefn o Drive: 2 x 9.2 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes possible) o Bearing lubrication located externally, optional central lubrication system available at an extra cost Delivery time approx. 16 to 18 weeks.

Condition: excellent (used), Acword BR100 Extractor with Workstation Metal extractor from the Acword brand, featuring a Bosch Rexroth workstation and drawer cabinet. Exhaust air capacity: 1010 m³/h Connection nozzle: 100 mm Noise level: 83 dB Inlet under pressure: 2550 Pa Hfodpfx Ajhufbceiten Voltage: 400 V Weight: 65 kg Exhaust air speed: 32 m/s Frequency: 50 Hz Height: 1490 mm Filtration area: 6 m² Motor power: 1.1 kW Width: 594 mm Volume of the waste container: 0.0338 m³ Number of phases: 3 Length: 670 mm Complete factory closure; large selection of storage platforms, pallet racks, shelving, and paternosters. High-quality industrial machinery, lathes, grinders, and hand tools. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, mileage: 187,100 km, power: 235 kW (319.51 HP), first registration: 12/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2028, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, RIO Box, LGS IV, EBA 2, ASR, ESS, MAN BrakeMatic, MAN Tronic, ASR, disc brakes, trailing axle steered/liftable, 3-seater, ASR, radio MAN Media Advanced Navi 7" incl. SD card, BTFSE for 2 telephones, Aux/USB, MAN CameraView pre-loaded HS Olympus 23 m³ suitable for household waste and bulky waste, with Terberg Terberg Omni-DEKA automatic, comb tipping device for 60-1100 l containers. Comfort gearshift, central lubrication system, automatic lock Hfjdpfxjtu R T Ro Aitjn

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Hfedpfx Aotrl R Aeiten Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: new, empty load weight: 1,300 kg, maximum load weight: 950 kg, loading space length: 3,010 mm, loading space width: 1,530 mm, loading space height: 350 mm, tire size: 165R13C, Car trailer braked and with 100km/h from trailer manufacturer STEMA type SyStema ST O2 13-30-15.1. The open box trailer is ideal for private transportation or commercial use. Garden waste, small furniture and motorcycle transport for up to 3 motorcycles is possible thanks to the removable side walls. As standard equipment, the steel trailer has a 100 km/h approval, front and rear flap, support wheel, eight lashing eyes, high-quality locks, removable galvalum galvanized drop sides and a V-drawbar. The complete equipment list and technical details can be found below. This trailer is also available in different versions, for example as a tarpaulin trailer. Hsdpfjrx S Dpex Aitofn We also offer car trailer accessories such as attachments, high tarpaulin, flat tarpaulin, drawbar box and rear supports, ramp rail, stand rail, motorcycle rocker, motorcycle lashing straps, lashing straps.

Condition: new, Thermo Scientific Wellwash Microplate Washer Description Reliably wash 96-well plates with the Thermo Scientific Wellwash, a user-friendly and reliable microplate washer for routine ELISA applications. The washer features a graphical user interface, various language versions, and a USB port for optimal user-friendliness and excellent convenience. Features: Large, clear color display and keypad ensure ease of use The user interface is logically and intuitively designed, enabling quick protocol programming User-friendly software requires only minimal training and ensures a quick start Hfjdpfstzb D Dox Aiten Pressure-free bottles are safe to use Liquid level sensors in the wash and waste bottles ensure safe operation Automatic pre-rinse function ensures reliable performance Aerosol cover prevents the release of aerosols containing infectious material Plate sensor detects whether a plate is present or not Wellwash is used to effectively remove excess liquid from wells Low residual volumes ensure optimal washing performance and reliable assay results You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Hsdpjrfw Ikofx Aitjfn Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 1,500 kg, total length: 2,985 mm, total width: 3,972 mm, total height: 3,000 mm, Equipment: documentation/manual, type plate available, The ASCO GS Medi is a reliable and efficient Grizzly screen designed for demanding applications in mining, construction, and recycling. Its robust build and stable, solid screen bars make it ideal for separating coarse material such as large rocks, soil clods, and other bulky components before they reach the main screening stage. By using strong, parallel bars set at equal distances, the ASCO GS Medi effectively retains larger particles while allowing smaller material to pass through for further processing. This not only ensures high material quality but also minimizes wear and tear on downstream equipment, extending the lifespan of the entire system and lowering maintenance costs. Built for continuous use in tough conditions, the ASCO GS Medi delivers dependable pre-screening for stone processing, demolition waste, earthmoving, and raw material extraction. Its durable design and low-maintenance operation make it a smart investment for any material processing operation that demands efficiency and long-term performance. Technical details: - System performance: 85t/h with springs, 75t/h without springs Hfsdpfx Aowym Eysiton - Maximum bucket width: 3,7 m - Screen area: 6,8 m² - Weight: 1500 kg - Width: 3,97 m - Length: 2,98 m - Height: 3 m - Loading height: 2,78 m

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Hjdpfx Aijxhfpdotsfn Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: used, mileage: 621,375 km, power: 338 kW (459.55 HP), first registration: 02/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGX 18.460 4x2LLS-U VIN: M779106 Chassis / Components: * Full air suspension * Wheelbase 3,600 mm * Tires: Front: 315/60 R 22.5 / Rear: 295/55 R 22.5 * Condition: Front: ~70% / Rear: ~70% * 2 x 480 L aluminum diesel tanks * 1 x AD-Blue tank Engine / Transmission: * 338 kW 460 hp / 12,419 cm³ / Euro 6c * ZF Intarder * ZF Automatic transmission * Differential lock Cab Equipment: * XXL cab * 2 bunks * Parking heater * Automatic climate control * Parking air conditioning * Refrigerator * Hands-free system * Radio * AUX, BT, USB * Navigation * LGS = Lane Departure Warning System * ACC = Adaptive Cruise Control * Emergency braking assistant Weights: * Gross vehicle weight 18,000 kg Hsdpfoxuxwhsx Aitjfn * Payload 9,866 kg * Unladen weight 8,134 kg Other: * 1 previous owner * German registration * New main inspection (TÜV) possible upon request New main inspections / safety inspections or weight adjustments (reduction/increase) are possible upon request. We will gladly assist you in obtaining export/transfer license plates. We also offer vehicle transportation within Germany. Contact us! We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors, changes, prior sale, and errors. Your RL-Leible team! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On an area of 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you with loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day license plates / export license plates We will gladly assist you in obtaining export license plates/temporary license plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: used, mileage: 621,375 km, power: 338 kW (459.55 HP), first registration: 02/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGX 18.460 4x2LLS-U VIN: M779106 Chassis / Components: * Full air suspension * Wheelbase 3,600 mm * Tires: Front: 315/60 R 22.5 / Rear: 295/55 R 22.5 * Condition: Front: ~70% / Rear: ~70% * 2 x 480 L aluminum diesel tanks * 1 x AD-Blue tank Engine / Transmission: * 338 kW 460 hp / 12,419 cm³ / Euro 6c * ZF Intarder * ZF Automatic transmission * Differential lock Cab Equipment: * XXL cab * 2 bunks * Parking heater * Automatic climate control * Parking air conditioning * Refrigerator Hfjdpfx Aexuxwzeitsn * Hands-free system * Radio * AUX, BT, USB * Navigation * LGS = Lane Departure Warning System * ACC = Adaptive Cruise Control * Emergency braking assistant Weights: * Gross vehicle weight 18,000 kg * Payload 9,866 kg * Unladen weight 8,134 kg Other: * 1 previous owner * German registration * New main inspection (TÜV) possible upon request New main inspections / safety inspections or weight adjustments (reduction/increase) are possible upon request. We will gladly assist you in obtaining export/transfer license plates. We also offer vehicle transportation within Germany. Contact us! We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors, changes, prior sale, and errors. Your RL-Leible team! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On an area of 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you with loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day license plates / export license plates We will gladly assist you in obtaining export license plates/temporary license plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: new, functionality: fully functional, overall weight: 10 kg, MUBA Rubble Chute 1.10 m – Robust, Modular and Safe Waste Disposal This MUBA rubble chute, 1.10 m in length, is made from polyethylene and features a variable diameter: 0.50 m at the top tapering to 0.40 m at the bottom. It is designed for the efficient and safe removal of construction waste, debris, or stones from elevated floors to the ground or a collection container. Key Features - Durable Material: Sturdy polyethylene, impact- and wear-resistant - Modular & Flexible: Easy to connect via two chains per segment - Safety First: Reinforcement ribs in wear zones and chain lock with carabiner - Performance & Hygiene: Prevents debris scattering, enables faster and cleaner waste removal - Compatibility: Suitable for attachment to scaffolding, walls, or windows with matching support structures Why this chute is indispensable: - Efficient material handling: quick disposal of debris without manual transport - Modular connectable system: easily build greater heights with multiple segments - Safe and reliable design: with additional reinforcement and chain locking system - Cost and time saving: fewer man-hours, less noise and reduced dust dispersion - Professional use worldwide: ideal for construction projects, renovations, and apartment cleaning At ABS Trading and Building Equipment, we have extensive experience with global trade - Worldwide delivery by pallet, container, or courier - Full export support (customs, invoicing, bulk pricing) - Completion with frames, hoppers, and suspension kits available Technical specifications - Length: 1.10 m (usable length: 1 m) Hedow Dclkopfx Aitjfn - Diameter: 0.50 m top, 0.40 m bottom - Weight: approx. 9.5 kg

Condition: new, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, Dimensions and Weights External length approx. 6,896 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,310 mm Rollway length approx. 6,880 mm Wheelbase 5,100 mm Complete empty weight 3,860 kg Gross weight approx. 18,000 kg Payload 14,140 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis with cross members, welded box-type idler beams made of QSTE steel 4 pneumatically operated container locks Side guards closed according to Directive 89/297/EEC. Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40mm, outer diameter 110mm, thickness 30mm Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 4300 mm, wheel mounting by centering according to DIN 74 361 Part 3. Braking system Compressed air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system in accordance with Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice 1 x 15-pin connector 6 LED side marker reflectors with flashing lights 2 white LED front marker lights 2 LED rear lane departure lights, separately mounted 1 LED reversing light Wheels/Tires Regional transport tires: 4 tires 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles serve to protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box Paintwork Chassis color: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook: yellow Documentation Hfodevynaaepfx Aiton Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions Side protection device, closed Hanging net box, galvanized EBB sticker DEKRA certificate All information No guarantee. Errors excepted. Prior sale possible.

Condition: good (used), Spindle mount BT 50 Collet chuck holder DIN 6388, diameter 2 - 16 mm Gear ratio 1:6 Hfedpfowz I Tbox Aitsn Max. speed 15,000 rpm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, mileage: 266,500 km, power: 220 kW (299.12 HP), first registration: 07/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: silver, gearing type: automatic, emission class: euro6, total length: 9,350 mm, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 38 m³, loading space length: 7,050 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, Cab & Comfort* M-cab ClassicSpace, 2.30 m wide, tunnel 320 mm * Comfort driver's seat (suspension seat), co-driver's functional seat * Seat covers made of velour (driver's and co-driver's seat) * Air conditioning * Auxiliary hot water heater, waste heat recovery * Electric windows on both sides * Multifunction steering wheel * Exterior sun visor (transparent) * Entry lights in door panel * Bottle holder, smoker's package ----Safety & Assistance Systems* Electronic braking system with ABS and ASR * Disc brakes on front and rear axles * High Performance Engine Brake * Stability control assistant (ESP) * Roll control assistant * Lane keeping assistant * Distance keeping assistant * Attention assist * Turning assistant * Active Brake Assist 5 * Tire pressure monitoring * Cruise control, speed limiter (90 km/h) * Hazard warning flashers during emergency braking * Acoustic warning for parking brake ----Lights & Visibility* Bi-Xenon headlights * LED daytime running lights * Fog lights * LED rear lights, ambient lighting, LED outline light * Headlight cleaning system * Automatic high/low beam and cornering lights * Front mirror (heated) * Curb mirror * MirrorCam * Light sensor * Rain sensor ----Drive & Chassis* Engine OM936, R6, 7.7 l, 220 kW (299 hp), 1200 Nm, Euro VI D * Transmission G 140-8/9.30-0.79, Mercedes PowerShift 3 * Front axle air-suspended (8.0 t), rear axle air-suspended (13.0 t) * Differential lock rear axle * Disc brakes on front and rear axles ----Multimedia * Multimedia cockpit (fully digital) touch * Digital touchscreen radio * DAB+ / * 2-way speaker system * Digital tachograph (2nd generation, ADR), trip computer * FleetBoard Eco & Support * Truck Data Center 7 * Rear view camera system ----Body:* Titgemeyer GETO Sider Curtainsider, year of construction 2020 * CODEXL certificate according to ADR DIN EN12642 & VDI 2700 * 1 Adaico 2.5 XL sliding tarpaulin per side * Sideboards (800mm) * Safety Roof * BÄR tail lift Hsdpfx Aiezhh Dkstsfn -----* Tire dimension front axle: 315/70R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 500 * AdBlue tank: 60 * Technically permissible total weight: 20500 * Unladen weight: * Permissible trailer load: * Overall length: 7330 * Wheelbase: 5200 * Next inspection due: ----Vehicle number/Vehicle: 12245----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.----We are happy to assist you with all formalities that arise when purchasing a vehicle. Simply let us know your wishes and suggestions and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arranging financing, applying for export license plates, vehicle delivery, vehicle registration, recoveries and vehicle transport----YOUR VTS TEAM

Condition: used, This listing is for Thermo Scientific Cytospin 4 Centrifuge. Hfedpfjza Dcbsx Aitjn The unit is in full working condition and ready for immediate use. Power-On Verified The Thermo Scientific Cytospin 4 is a premier cell preparation centrifuge designed for thin-layer cell deposition. It utilizes centrifugal force to isolate and deposit cells onto microscope slides while maintaining cellular morphology. Features include a sleek design, simple touchscreen controls, and enhanced safety protocols. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Integrity: 100% Original Parts (Non-Refurbished) • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: excellent (used), -1 Horizontal block bandsaw Hänni with tensioning carriage approx. 8 meters Roller diameter 1200 mm incl. accessories - Frame saw system Bögli, passage 700 mm - Tensioning carriage, hydraulic with auxiliary carriage Hfedpfxeyr Dbuo Aiten - Split wedge Mara, driven - Powered roller conveyor, length 6 meters / total length approx. 12 meters - Vollmer automatic gang saw sharpener - Manual setting tool for teeth - Sharpening machine for CV saws Vollmer - Waste carriage / 2 electric cranes and various accessories. Can also be dismantled at additional cost.

Condition: used, This listing is for the Agilent Cary Series UV-VIS Spectrophotometer. Hjdpfxjy H Dzro Aitjfn The unit is in full working condition and ready for immediate use. Designed for accurate absorbance and wavelength measurements, it is ideal for research, quality control, and routine lab analysis applications. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for the Binder Fed 400 Drying Heating Chamber. The unit is in full working condition and ready for immediate use. Designed for consistent temperature control, it is ideal for drying, heating, and thermal testing applications in laboratory environments. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility Hfjdpsy H I Ngjfx Aitjn • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for the Agilent 2100 Bioanalyser. The unit is in full working condition and ready for immediate use. Compact microfluidics system designed for rapid, high-precision analysis of nucleic acids and proteins with minimal sample volume and automated processing. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Hsdoy Hqk Hspfx Aitsfn Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory