Used Yngves Cable Peeler for sale (3,996)

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Hjdpszgci Eefx Ag Eofn Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Hfedpfx Agjzd Sdms Ejn Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), For sale: professional transport ventilator Dräger Oxylog 3000 Plus – a device used in emergency medical services, ambulances, and healthcare facilities. Condition: The device powers on and works. The screen is clear, buttons and knobs are operational. Visually, it shows normal signs of use. The casing has minor cosmetic damage, which does not affect functionality or operation. Features: transport ventilation for adults and children; ventilation modes as per the Oxylog 3000 Plus model; adjustable breathing parameters; clear display with alarms. Included: Dräger Oxylog 3000 Plus ventilator, carrying bag, cables and connectors as shown in the photos. Additional information: used medical equipment; sold exactly as shown in the pictures; ideal as a backup transport ventilator for an ambulance, hospital, or technical unit. Hfodpfxsz Sllms Ag Ejn

Condition: used, Weiss Type: WT3-1000/40 Weiss temperature testing cabinet with S!MCON / 32 control, water-cooled Control panel: "Touch Panel" All control and operating commands can be initiated on the "Touch Panel" control panel by simply touching the function symbols. Adjustable feet Hfodozgbt Nepfx Ag Een To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing cabinet is equipped with adjustable feet. Feedthroughs The testing cabinet is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the testing chamber. Feedthroughs installed as standard R1: 125 mm L1: 50 mm Testing chamber volume: approx. 990 liters Testing chamber dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 4500 W Data for operation: Testing chamber lighting: Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 22.0 A, Rated power 11.5 kW Fuse, to be provided by the customer: 32 A, slow-blow Sound pressure level approx. measured at a distance of 1 m from the front, 1 m height: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, inverter welding machine -Manufacturer: Ess, MIG/MAG gas-shielded welding machine -Type: E1-3300 -Max. welding current: 330 A -Features: Water-cooled, remote control Hodpfszrt E Uex Ag Ejfn -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg

Condition: excellent (used), I am offering a professional DELO dispensing system – DELO-DIV pilot with a DELO-DIV VD450 manual dispenser. This equipment is designed for precise and controlled dispensing of adhesives and various media in industrial applications. The system is ideally suited for use in: • Electronics manufacturing • Automotive sector • Precision assembly • Laboratories and R&D • High-repeatability technical bonding processes Hodpfx Aez Slmdjg Eefn Operation is managed via the DELO-DIV pilot touchscreen panel, which allows: • Saving and selection of dispensing programs • Manual dispensing (manual mode) • Precise adjustment of working parameters • Intuitive operator interface The DELO-DIV VD450 manual dispenser ensures high application accuracy and process stability. — Condition • Used • Fully functional • Normal signs of use • The unit powers on and responds correctly (visible in the pictures) — Set includes • DELO-DIV pilot controller (touchscreen panel) • DELO-DIV VD450 manual dispenser • Cables / connectors as shown in the photos — Additional information • Manufactured in Germany • CE / UKCA marking • Ideal for production facilities and process integrators

Condition: used, mileage: 3,000 km, power: 140 kW (190.35 HP), color: black, gearing type: automatic, Equipment: ABS, air conditioning, central locking, - To ensure you receive the best possible advice from us, we request that you schedule an appointment. Mr. Kiel will be happy to assist you, Tel: Hfsdpfx Ajymi E Iog Eon A4M All-wheel drive 4x4 with torque-on-demand, AR2 axle ratio i = 3.923, BA3 Active Brake Assist, BH1 HOLD function, C6L multifunction steering wheel, CL1 steering wheel adjustable for tilt and height, D03 high roof, D50 full partition wall, E07 Hill Start Assist, E1D digital radio (DAB), E1U USB socket 5 V, E2M additional battery for aftermarket consumers, engine compartment, E36 isolating relay for additional battery, E57 trailer socket electrics, E7B pre-installation for navigation, E7M MBUX multimedia system, ED4 AGM battery 12 V 92 Ah, ED5 programmable special module, EE5 Ultracap Automatic transmission locking, ES0 jump-start connection, F1K coat hook in driver's cab, F64 electric fold-in exterior mirrors, F68 heated and electrically adjustable exterior mirrors, FF5 storage above windscreen, FJ4 storage compartment under cockpit, FR8 reversing camera, FU5 exterior mirrors without indicator, FY7 multi-button wireless remote control, G43 9G-TRONIC, H1B tachograph operation front under headliner, H21 heat-insulating glass with band filter on windscreen, HH4 THERMOTRONIC automatic climate control, IL5 left-hand drive, IR4 wheelbase 3665 mm, IT9 4.0 ton gross weight, J10 speedometer km/h, J55 seatbelt warning for passenger seat, J58 seatbelt warning for driver’s seat, J65 outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JB4 Active Lane Keeping Assist, JD6 Intelligent EU tachograph, JF1 rain sensor, JF7 Hill Start Information Assistant, JH3 communication module (LTE) for digital services, JI7 initial service interval 60,000 km, JK5 instrument cluster with color display, JS2 Intelligent Speed Assistant, JT7 Turn Assist, JW8 ATTENTION ASSIST, KB7 main fuel tank 93 liters, L22 partial LED rear lights, L44 front side indicator lights, L65 interior light(s) LD/FG compartment with door contact, L94 deletion of parking light, LA2 headlamp assistant, LB1 side marker lights, LB5 third brake light, LE1 adaptive brake light, MD4 speed limiter 90 km/h EU, MJ8 ECO start-stop function, MP6 engine version Euro VI, MR0 emissions class E (for heavy commercial vehicles), MS1 cruise control, MU6 OM 654 DE 20 LA 140 kW (190 PS) 3800 rpm, Q11 longitudinal beam reinforcement, Q67 rear towing eye, RY2 tire pressure monitoring on front and rear axles, wireless, S02 driver's seat, S04 adjustable passenger seat, SA5 driver's airbag, SA6 passenger airbag, SK2 driver's seat occupancy detection, T16 right-hand sliding door, T55 electric operation for right-hand sliding door, T60 opening limiter, electrically operated sliding door, T75 entry grab handles for driver and passenger, T77 grab handle entry cargo sliding door on partition wall, T86 entry grab handle on rear right corner pillar, V94 cable duct on side wall, V95 cable duct on rear portal, VF7 fabric 'Maturin' black, XM4 acoustic package We are happy to provide you with an offer for the trade-in of your used vehicle. Should you wish to lease or finance your vehicle, we will be happy to provide you with an individual offer. Mr. Kiel will gladly assist you. IMPORTANT: Viewing by prior arrangement only! All information is provided without guarantee; errors and interim sales excepted! Images are for illustration purposes only. Deviations from advertisements or other descriptions may occur due to errors, incorrect data, etc.

Condition: new, power: 368 kW (500.34 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, - Braking system Available in multiple units!!! Equipment: Preparation for auxiliary drive Emission standard EURO VI E DRIVE T. 315/70R22.5 Speed limiter 90 km/h Sunroof, electric version Front grille design Standard Black Cab tilting mechanism, manually operated Mirror Cams Cover for AS FHS in body color / For AT/AD in black AS cab, high roof Cab roof insulation, standard Sun visor for side window Driver's side dashboard design: plastic with black trim COC (Certificate of Conformity) INSTRUMENT CLUSTER 10 INCHES Passenger seat, static Weight variant, front axle 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg) Air compressor, 2-cylinder, 630 cc, with integrated clutch, demand-controlled Smart generator 2880 W (24V x 120A), demand-controlled Air suspension on front axle Batteries in frame overhang Wheel chocks, 2 pieces SR-SOLO LIGHT 17x Stabilizer bar, front axle Exhaust pipe, to the left Air filter unit under cab Preparation for toll system (OBU), includes antenna and wiring on the dashboard without receiver unit ConnectivityBox 4G, telematics contract optional Engine idle shutdown Standard engine setting Cursor 13 Tire pressure monitoring system (TPMS), sensors inside 4 DIN slots, storage space above, VDI interface (Vehicle-Data-Interface) for telematics services (FMS), version 4.0 Infotainment, 10" TFT display Transmission software, ECO-Roll (coast function) GPS cruise control Hi-Cruise Adaptive Cruise Control (ACC) Advanced Driver Distraction Warning Standard catwalk behind the cab Hill start assist (Hill Holder), for comfortable starting on inclines Electronic Stability Program (ESP) Rear view monitoring system with camera, Blind Spot Information System (BSIS), right Intelligent Speed Assist (ISA) Side marker lights Front over-run protection (MOIS) Advanced Emergency Braking System (AEBS) Preparation for alcohol interlock (ALC) with cable Alcoa aluminum rims, LVL ONE Painting of cab plastic parts in cab color Storage compartment left and right IVECO logo, Gunmetal Grey Air suspension for cab Hjdoz Si Uxopfx Ag Esfn Black decorative film on doors Sun visor, transparent, installed on the outside of the cab roof Premium refrigerator and storage box Digital EC control unit 4.1 ADR Auxiliary heater, diesel/water 4kW Fully automatic air conditioning in conjunction with stationary air conditioning With curtains on the bed Lower bed, one-piece, firmness/feel – soft, including adjustable headrest Horn behind bumper (compressed air) Electronic immobilizer and 3rd vehicle key Hands-On-Detection (HOD) Leather steering wheel Driver's seat HI-Comfort, air-suspended, with 3-stage cooling or heating function Smart storage space above Electro-hydraulic power steering Air tanks in aluminum version, number depends on suspension version and trailer version Without jack Battery 210 Ah High Performance AGM, battery disconnect switch electrically in the cab and on the chassis frame according to ADR/GGVS Standard ride height Fifth wheel coupling, manufacturer Jost Fuel tank 1190 liters (710 liters right and...

Condition: new, power: 368 kW (500.34 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, - Braking system Available in multiple units!!! Equipment: Preparation for auxiliary drive Emission standard EURO VI E DRIVE T. 315/70R22.5 Speed limiter 90 km/h Roof hatch, electric version Front grille design Standard black Driver's cab tilting mechanism, manually operated Mirror Cams Cover for AS FHS in vehicle color / For AT/AD in black AS driver's cab high roof Driver's cab roof insulation, standard Sun blind for side window Driver's side dashboard design: plastic with black trim strips COC - Certificate of Conformity INSTRUMENT CLUSTER 10 INCHES Passenger seat, static Weight variant front axle 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg) Air compressor, 2-cylinder, 630 ccm, with integrated clutch, demand-controlled Smart generator 2880 W (24V x 120A), demand-controlled Air suspension on front axle Batteries in the frame overhang Wheel chocks, 2 pieces Hsdpfx Asz Si Urjg Ejfn SR-SOLO LIGHT 17x Stabilizer bar, front axle Exhaust pipe, to the left Air filter unit under the driver's cab Preparation for toll system (OBU), including antenna and wiring on the dashboard without receiver unit ConnectivityBox 4G, telematics contract optional Engine idle shutdown Standard engine setting Cursor 13 Tire pressure monitoring system (TPMS), sensors inside 4 DIN slots, storage compartment above, VDI interface (Vehicle-Data-Interface) for telematics services (FMS), version 4.0 Infotainment 10" TFT display Transmission software ECO-Roll (coasting function) GPS cruise control Hi-Cruise Adaptive cruise control (ACC) Extended driver distraction warning system Standard step behind the driver's cab (catwalk) Hill start assist, for comfortable starting on inclines Electronic stability program (ESP) Rear monitoring system with camera, blind spot monitoring system (BSIS), right Intelligent speed assistant (ISA) Side marker lights Front area monitoring system (MOIS) Emergency braking assist (AEBS) Preparation for alcohol interlock (ALC) with cable Alcoa aluminum rims, LVL ONE Painting of the driver's cab plastic parts in the driver's cab color Luggage compartment on the left and right IVECO logo, gunmetal grey Air suspension for driver's cab Black decorative film on doors Sun visor, transparent, installed on the outside of the driver's cab roof Premium refrigerator and storage box EC control unit digital 4.1 ADR Auxiliary heater, diesel/water 4kW Air conditioning, fully automatic in connection with stationary air conditioning With curtains on the bed Lower bed, one-piece, firmness/lying feel – soft, incl. adjustable headrest Signal horn behind the bumper (compressed air) Electronic immobilizer and 3rd vehicle key Hands-On-Detection (HOD) Leather steering wheel Driver's seat HI-Comfort, air-sprung, with 3-stage cooling or heating function Smart storage compartment above Electro-hydraulic power steering Air tank in aluminum version, number depending on suspension version and trailer version Without jack Battery 210 Ah, high-performance AGM, battery disconnect switch, electric, in the driver's cab and on the chassis frame according to ADR/GGVS Ride height, standard Fifth wheel coupling, manufacturer Jost Fuel tank 1190 liters (710 liters right and...

Condition: used, mileage: 200,000 km, power: 315 kW (428.28 HP), axle configuration: 4x4, color: white, gearing type: automatic, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. number). Mercedes-Benz Actros 1843 LS HAD 4x4 semi-trailer tractor unit. Hodpfxjzdbn Ae Ag Eofn !!! 2 units available !!!, A1C front axle 7.5 t, A1H hydraulic auxiliary drive (HAD), A1Y front axle, straight version, B1B electronic brake system with ABS and ASR, B1F heater, electronic compressed air supply unit, B1H electric compressed air supply and control, medium, B2A disc brake, on front and rear axles, B2D disc brakes with partial protection, B2X parking brake, electronic, B5J brake and electrical connections, low, C0G frame overhang 1050 mm, C1W wheelbase 3700 mm, C5P frame, bolted, C6C steering, 1-circuit, C6I power steering pump, regulated, C6Q stabilizer bar, front axle, C7F front underrun protection (ECE), aluminum, C7T integral rear, C8B rear axle fender, 2550 mm vehicle width, C8H fender, 3-part, with EC splash guard, C8I splash guard (EC), front, C8W omission of underbody paneling, aerodynamic, D0L smoker's package, D0S compressed air connection, in the cab, D0U smoke detector, in the cab, D1C driver's air suspension seat, comfort, D1N co-driver's functional seat, D2N seat back, release, driver's seat, D2Y seatbelt control, D3B comfort bed, lower, D4T curtain, transverse in front of bed(s), D4Y sun visor, side, driver's side, D5Y rubber floor mats, driver's and co-driver's side, D6F air conditioning system, D6I waste heat utilization, D6M hot water auxiliary heater, cab, D6Z construction site filter, D7G storage compartment cover, driver's and co-driver's side, D7R storage flaps, above the windshield, D8A roof hatch/ventilation flap, roof, E6Y reversing warning system, combined with hazard warning lights, E7F cable remote control for air suspension, F2C floor variant, tunnel 320 mm, F2G cab width 2.30 m, F2M cab, 420 mm mounting height, F2U ClassicSpace, F3C cab mounting, comfort, air-sprung, F3W cab tilting device, mechanical-hydraulic, F4H cab rear wall without window, F4X external storage compartment flap, left, F4Y external storage compartment flap, right, F5Y A-pillar trim, F6D windshield, tinted, with band filter, F6I front mirror, heated, F6Q air horn, F6T MirrorCam, F7Y cab entry, left/right, movable, F8B 2 remote control keys, F8E locking system, with central locking, F8F comfort locking system, F8V light sensor, F8W rain sensor, G0K driving program economy/power, G0R transmission torque arms, optimized for assembly, G0T Predictive Powertrain Control, G2B transmission G 211-12/14,93-1,0, G5A single-plate clutch, G5G Mercedes PowerShift 3, H2C saddle coupling dimension +600 mm, I4A wheel arrangement 4x2, I5A 18.0-tonner, I6D semi-trailer tractor unit, I6I vehicle production plant, Wörth, I6X air suspension, rear axle, J1O tachograph digital, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2K loudspeakers, 2-way system, J2U navigation system, J3Z axle load measuring device, J6C multimedia cockpit, interactive, K2P tank 390l+130l hydraulic oil, left, 650x700x1365 mm, aluminum, K3V AdBlue tank 60 l, left, L1D automatic high beam/low beam and turning light, L1I fog lights, LED daytime running lights, L2H side marker lights, flashing, L2R 2 LED rotating beacon lights, L3A work lights, lower, L3C work lights, cab rear wall, upper, L4Z stone guard grille, metal, for headlights, M0C underbody panel, against dust swirling, M0Q noise regulation, according to UN-R 51.03 level 2, M5V High Performance Engine Brake, M6L air compressor, 2 cylinders, M7I insect protection grill

Condition: new, mileage: 300 km, power: 185 kW (251.53 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, loading space length: 72,800 mm, loading space width: 24,800 mm, loading space height: 24,400 mm, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at...). Iveco Eurocargo ML120E25/P 4x2, flatbed/tarpaulin + tail lift. Tail lift: Bär Type BC 1500 S4 (1,500 kg). POWERTRAIN, ZF 8AP1000 automatic gearbox, emission standard EURO VI E, Westinghouse brakes. EXTERIOR, halogen headlights, standard cab with a flat roof, grey chassis frame, exterior mirrors for a body width of 2600 mm, roof hatch, mechanical version, first-aid kit, plastic bumpers, black cab components. INTERIOR, coat rack on the rear wall of the cab including a sliding hook, rear axle ratio: 4.111, interior trim with fabric upholstery, digital 4.1 tachograph, EG design, CHASSIS, exhaust pipe in the center under the vehicle, air suspension on the rear axle, parabolic spring on the front axle, air filter unit under the cab, wheel chocks, 2 pieces, left-hand drive for right-hand traffic, engine intake air heater for optimal cold start performance at extreme temperatures, direct air intake without snorkel, jack, air dryer for the braking system, heated, C-profile steel ladder frame, chassis protection sealant Tectyl 300 G Clear, mechanical battery disconnect switch on the chassis, right side. FUEL EFFICIENCY & CONNECTIVITY, standard transmission mode, ConnectivityBox 4G, optional telematics contract, radio with Bluetooth, DAB+ and 7" display, tire pressure monitoring system (TPMS) with internal sensors, adaptive cruise control (ACC). SAFETY, lane departure warning system (LDWS), driver drowsiness warning, hill-start assist, for comfortable starting on inclines, electronic stability program (ESP), rear view monitoring system with camera, blind spot monitoring system (BSIS), right side, intelligent speed assist (ISA), front field monitoring (MOIS), autonomous emergency braking system (AEBS), pneumatic parking brake, preparation for alcohol interlock (ALC) with cable. OTHER, 24/12 Volt voltage converter (10.5 Amperes), onboard tools, two-stage engine brake, can be activated using the right steering column lever. Hfodpfx Agoz Si Tbo Een POWERTRAIN, tires 285/70 R 19.5. EXTERIOR, maneuvering and towing coupling at the front. INTERIOR, leather steering wheel with function buttons for radio, telephone, cruise control and menu navigation, comfortable co-driver's bench seat for 2 people, armrest for the center seat, work surface and cup holder when the center seat is folded down, preparation for toll system (OBU), includes antenna and wiring on the dashboard without receiver, electronic immobilizer and 3rd vehicle key, smoker's package, ashtray and cigarette lighter, electrical preparation for load compartment light. CHASSIS, electrical preparation for tail lift operation according to VEHH standard, gross vehicle weight 11,990 kg (weight variant front axle: 4,800 kg / rear axle: 8,500 kg), air compressor 360 ccm, recommended for trailer operation with continuous braking system, generator 2160 Watt (24 Volt x 90 Amperes). Recommended for tail lift operation, air reservoir in aluminum design, number depends on suspension version and trailer version, weight variant front axle: 4,800 kg / rear axle: 8,500 kg. KEY FEATURES, trailer socket for 12 Volt operation, 13-pin, trailer socket for 24 Volt operation, 15-pin, trailer coupling, 40 mm, 120 kN, automatic, trailer coupling, manufacturer Rockinger, trailer version for trailer operation with...

Condition: used, Keysight Mixed Signal Oscilloscope / Digital Storage Oscilloscope Keysight / Agilent InfiniiVision MSO-X 3034A 350 MHz Mixed Signal Oscilloscope with 4 analog channels, 16 digital channels, and 4 GSa/s sampling rate For sale is a used Mixed Signal Oscilloscope from the manufacturer Keysight Technologies / Agilent Technologies. The device is suitable for precise signal and measurement tasks in development, laboratories, service, training, research, as well as industrial electronics and quality assurance. Technical data Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog channels: 4 Digital channels: 16 Max. sampling rate: 4 GSa/s Display: Color display MegaZoom technology Inputs: Hfodezh I Dwjpfx Ag Ejn 4x analog BNC inputs Digital input / Logic connector USB port USB Device / USB Host Trigger Out Ext. Trigger / Calibration connector Power connection: 100 - 240 V AC 50 / 60 Hz Power consumption: max. 100 W Dimensions: approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels USB interfaces Trigger functions Analysis functions Measurement functions Storage and printing functions Carrying handle Accessories as shown in the pictures Application areas Electronics development Laboratory Service Troubleshooting Signal testing Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3x probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Device can be switched on Display and operation appear to be functioning properly Test seals / stickers as shown in the pictures are present Weight: approx. 4 kg The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2013, For sale: a complete travelling crane with an electric chain hoist from the renowned Stahl brand, with a lifting capacity of 1000 kg. The set was manufactured in 2013. The set is fully functional and ready for further operation. ✅ Technical specifications: * Year of manufacture: 2013 * Lifting capacity: 1000 kg (1 ton) * Hoist: STAHL ST2010 – a robust, reliable unit * Drive type: electric, chain * Total length of the crane: 1046 cm (10.46 m) * Stable load-bearing beam + cable and power supply guides * Can be inspected on site – it was used in a clean production hall The crane is in very good technical condition – well-maintained and ready for use. Ideal for a workshop, industrial plant, warehouse, or tool shop. Hfsdpfoz Sk S Ejx Ag Een

Condition: excellent (used), For sale: Professional Fischer DUALSCOPE DMP40 coating thickness gauge designed for non-destructive measurement of metallic and non-metallic coatings on various substrates such as steel, iron, aluminum, and other non-ferrous metals. • Condition: Very good, fully functional and ready for operation • Current PCA calibration certificate dated 05.11.2023 • Complete set in original case including probe, cables, calibration foils, adapter, manual, and certificate Specifications and benefits • Automatic substrate recognition (FE/NFE) and selection of the appropriate measurement method • Wide measuring range and high measurement precision • Color display with intuitive navigation menu in Polish • Functions for statistics, results recording, and data export • Non-destructive measurement – ideal for production quality control and laboratory testing • Compliance with ISO, ASTM, and DIN standards • Robust industrial housing suitable for both field and laboratory use The set includes • Fischer DUALSCOPE DMP40 gauge • Measurement probe • Measurement cables • Calibration foils • Measurement adapter • Original transport case • Fischer lanyard • User manual and PCA certificate Applications • Coating quality control in electroplating, painting, and automotive industries • Industrial production and research laboratories • Service measurements and technical inspections Hjdpoz Slg Refx Ag Eofn

Condition: used, Ytterbium Fiber Laser Type: YLR-2400 S2-WW Hedpfjzdrw Hox Ag Esfn Description: Laser module (IPG YLR-2400 S2-WW fiber laser with cooling) Year of manufacture: 2017, Serial number: 7121450 Laser power: 2.4 kW Laser structuring system, cooling unit KKW; without 3D scanning head and without laser spy sensors and cables. 400 VAC +/-10% 3P/PE 50/60 Hz 80A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Vötsch Hedszgbmijpfx Ag Eofn Type: VLM 3068/S Vötsch Temperature Test Chamber VLM 3068/S, Air-Cooled (Top-loading test chambers for construction materials) Control Panel The control panel is mounted on a console on the temperature test chamber. All control and operating commands can be activated by simply touching the function symbols. The operating manual for the control panel is included. Main Switch The main switch is located at the front of the temperature test chamber. Air Handling Unit The air handling unit is located in the test chamber and contains the components necessary for temperature control. In the air handling unit, the air is conditioned (cooled/heated) and circulated through the test chamber by the test chamber fan. The air is drawn in at the center of the side wall and re-enters the test chamber via the air deflectors on the long sides. Feedthroughs The temperature test chamber can optionally be equipped with feedthroughs. These allow cables and testing equipment to be placed in the test chamber. Feedthrough at the front 2 x 82 mm diameter, at the rear 1 x 85 mm diameter. Internal Dimensions: Width 2000 mm, Depth 570 mm, Height 600 mm External Dimensions: Width 3000 mm, Depth 870 mm, Height 1060 mm Technical Data: Data for Mechanical Load: Max. load with test specimen Test chamber floor (evenly distributed over the area) 600 kg Point load 50 kg Data for Temperature Tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the useful space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for Operation: Rated voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Fuse on customer side 16A slow-blow Temperature Test Chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Espec Type: TSD-100 New evaporator installed in February 2026 100-liter usable volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Hedezizl Rjpfx Ag Esfn Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Iridex Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Ophthalmology: Hfjdpfxozd Ut Rj Ag Eon Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with an integrated image analysis system, which gives it the ability to "see," allowing it to handle assembly automation and inspection tasks with maximum flexibility. Hedpezg Eyajfx Ag Esfn It works in collaboration with humans, sharing the same tasks without compromising productivity or safety. It offers the highest level of precision and efficiency while operating in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive, and food industries. Payload: 4 kg Reach: 946 mm Weight: 22.6 kg Perfect for Industry 4.0 Highest flexibility and adaptability Extremely low costs for automation and maintenance The TM5-900 is a true plug & play solution. Connect a monitor, mouse, and keyboard to the control unit, and the TM5-900 will be ready for use in just a few steps. Scope of delivery: Techman Robot TM5-900 Control unit, connection cable Operating device 2 calibration plates for the camera system 1 landmark Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Mitsubishi Type: Mitsubishi Melfa RV-3SDB-S15 Mitsubishi Industrial 6-Axis Articulated Arm Robot The RV-3SDB articulated arm robot The RV-3SB robot is specifically designed for handling up to 3.5 kg. The enclosure, which meets the IP 65 standard, ensures operation under extreme conditions. Special Features: • Adjustment of axis compliance for workpiece tolerance compensation • Conveyor tracking • Sensorless collision detection • Encapsulated design • Adaptive speed optimization Feature/Function Degrees of Freedom (Number of Axes) 6 Design: Standard (Oil Mist) Mounting: Floor, wall or ceiling mounting possible (wall mounting with limitations in the J1 axis) Construction: Vertical articulated arm Drive System: AC servo (all axes with brake) Position Detection: Absolute encoder Range of Motion: Degrees Body (J1) 340 (−170 to +170) Shoulder (J2) 225 (−90 to +135) Elbow (J3) 191 (−20 to +171) Forearm Rotation (J4) 320 (−160 to +160) Wrist Bend (J5) 240 (−120 to +120) Wrist Rotation (J6) 720 (−360 to +360) Hfodpfxszdiukj Ag Een Movement Speed: Degrees/s Body (J1) 250 Shoulder (J2) 187 Elbow (J3) 250 Forearm Rotation (J4) 412 Wrist Bend (J5) 412 Wrist Rotation (J6) 660 Resultant Maximum Speed 5500 mm/s Lifting Force Nominal value 3kg Maximum value 3.5kg Reach Radius (to the pivot point of the J5 axis) 642mm Weight: 37kg Robot Controller: CR1DA-721-S15 (230V) Teachbox: R46TB with color/touch display Technical Data: Dimensions (W × H × D) 252 × 240 × 114 mm Weight 1.250 kg Connection Type: Connection to the robot controller with a circular connector, cable length 7 m Interfaces: RS422 For connection to the robot controller Display/Screen: Touch-sensitive 6.5" TFT monitor with backlight and 640 × 480 pixel resolution, the touchscreen can be operated with fingers or a stylus. Condition: used Scope of Delivery: (See image) (Subject to changes and errors in the technical data, information provided!) We will gladly answer any further questions you may have by phone.

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Hfedpezdqkrjfx Ag Een Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Condition: used Scope of delivery: (See picture) Hedpfx Agezdn T Rs Eofn (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber, EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) cooling incubator, manufactured in 2022, equipped with the extended safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests of lithium-ion energy storage systems. Special added value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What can the device do specifically? (Point 2 – Performance & Application) Performing aging tests on lithium-ion cells Performance tests (charge/discharge cycles at varying temperatures) Temperature endurance tests and temperature change tests Tests of unpowered and cyclically powered cells Reproducible, precise temperature control throughout the usable space Safe execution of tests under realistic thermal conditions Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: Battery & cell manufacturers Research and development laboratories Testing laboratories & safety testing Automotive / e-mobility / energy storage The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety functions: Automatic & manual CO₂ fire extinguishing system Smoke detector with optical & audible alarm Mechanical double-door locking system (secure containment) Spark protection in the interior Exhaust port with reversible overpressure valve Connections for external inertization (e.g., nitrogen) Emergency stop / manual triggering of the extinguishing system Feedthrough openings for charging and measuring cables Result: The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur without resulting in an explosion or uncontrolled propagation. Not an abuse or destruction test device, but a safe, standard-compliant test chamber for real operating and failure scenarios. Technical key data: Temperature range: -10 °C to +100 °C Interior volume: approx. 698 liters Inserts: 4 x stainless steel Max. load per insert: 45 kg Max. total load: 100 kg Electrical data: Mains connection: 200–240 V AC Frequency: 50 / 60 Hz Phase: 1-phase Power consumption: approx. 2.1 kW Fuse rating: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Hfsdpfxozizr Re Ag Ejn Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why this device is special genuine battery safety test chamber suitable for EUCAR hazard level 5 integrated CO₂ extinguishing system large chamber (≈700 l) high market & resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Hjdpfxjzimgto Ag Eofn Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Stäubli Type: TX90L robot / CS8C controller Six-axis robot with controller For sale: a Stäubli TX90L 6-axis industrial robot including CS8C controller and original teach pendant. The robot is suitable for pick & place, assembly, handling, machine loading, as well as automation, testing and training applications. Programming via VAL3. Technical data – Robot Type: TX90L Hjdozix Ucopfx Ag Eefn Axes: 6 Payload: 5–6 kg nominal, up to 15 kg temporarily Reach: approx. 1,200 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 (IP67) Mounting: Floor / Wall / Ceiling Robot weight: approx. 113 kg Technical data – Controller Controller: Stäubli CS8C Software: VAL3 s6.7.1 Programming language: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by phone.