Used Wurstschneider Beem S 2 for sale (104,944)

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) Kdedpfx Aeyc T Apsbfen The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.

Condition: excellent (used), Industrial mixer with 2 blades made of stainless steel. Rewind 2.2 kW motor, has 2 gear reducer S.T.M. type RI 70S, with a ratio of 1:15 corresponding to the pallets. It has a manual system for adjusting the rotation speed of the blades. Total mixer weight 120 kg, Total length with handles 200 cm, width 80 cm, height 48 cm The pallets are identical, detachable, have a sharp edge in the direction of rotation and have dimensions of: 45cm x 45 cm. Made in Italy. Uses: in the processing of milk, wine, other uses in the food industry where we work with liquids, for various substances of different densities and viscosities / strains. Price 1.200 Euro + VAT negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ksdpfsh E Sfcjx Abfsdn Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, functionality: fully functional, Grundfos TPE 50-430/2 S-A-F-A-BQQE-LD1 Single Stage Close Coupled In Line Centrifugal Pump. Ksdpstp A Shsfx Abfjdn Specifications: DN50 flanges 345mm between flanges Q = 35.1m3/h H = 33.9m n= 2920 /min Good working condition. Please check out our other listings as well.

Condition: new, Load Weight Shelf 6600 kg Loading weight per level 1100 kg Number of load levels 6 Stk. Kodpofgyhisfx Abfsdn Recommended material length 6000 mm Column width 2 x 2000 mm Shelf height 2440 mm Compartment width 800mm mm

Condition: used, This listing is for a B.BRAUN Unita perfusor/ syringe pump with mechanical display. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. The Perfusor is a medical syringe infusion pump designed for precise controlled delivery of medications and fluids to patients. These devices are commonly used in critical care, anaesthesia, emergency, operating theatre, neonatal, paediatric, and adult intensive care environments to administer small-volume infusions (e.g., sedatives, analgesics, vasopressors) where accuracy is essential. Kdedpfx Asxzibwebfen Listing name: B.BRAUN Unita S 871042-2 Perfusor/ Syringe Pump

Condition: used, TECHNICAL DETAILS - centers height : 100 [mm] - distance between centers : 650 [mm] - length of internal grinding : 100 [mm] - Ø of internal grinding : 3 to 40 [mm] - maximal table orientation : 30 [°] - workhead : * spindle speed (variator) : 60-1200 [Rpm] * motor power : 0.5 [kW] * interior cone : morse 4/2 - wheels sizes : 350 x 30 x 127 [mm] - wheelhead : * power : 3 [kW] * orientation : 15/30 [°] - maxi part weight : 20 [kg] - maxi power required : 5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3000 x 1400 [mm] - Machine height : 1600 [mm] - Machine weight : 1900 [kg] EQUIPMENT - complete internal grinding attachment : 45.000 [rpm] - 1 complete cooling device - 1 counter headstock with fine adjustment - 1 reversible and adjustable trueing device - 1 directional diamond holder - 2 axis X, Y digital display Kedpfjuhby Rox Abfodn - 1 steady rests 3 points

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition. Kedpey D E Riefx Abfjdn

Condition: used, We are offering this used GESIPA FireFox 2 F axial pneumatic-hydraulic riveting tool, year of manufacture unknown, for sale. Kdjdszfg Suopfx Abfon Manufacturer: Gesipa Blindniettechnik GmbH & Co. KG Type: FireFox 2 F axial Maximum operating pressure: 6.0 bar Serial number: If you have any questions or require further information, please do not hesitate to contact us.

Condition: as good as new (ex-display), Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Kdjdpfx Asyyqnfobfjn Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: used, Year of construction: 2009, machine/vehicle number: 6953 S, First registration: August 31, 2009 Boom length: 21 m Kdjdpfjzdylljx Abfjn Differential taxation = bid price plus 18% commission and 19% VAT on the commission!

Condition: new, R. & S. Keller Control panel Sinumerik 820 T , unused, 100% functional Kodpoi Ecl Iefx Abfjdn

Condition: new, R. & S. Keller Control panel Sinumerik 820 T , unused, in opened original packaging, 100% functional Kdedpfx Aji Ecl Ssbfsn

Year of construction: 2004, condition: excellent (used), Known K&S 8020 Specifications Specification Value Bonding type Automatic thermosonic ball bonder Wire material Gold wire (Au) Bond head Voice-coil direct-drive bond head Ultrasonic transducer 120 kHz unibody transducer with adaptive USG Vision system 20/20 vision system Camera Sony XC-75 CCD Bond pitch capability Sub-70 µm pitch kit available Bond area 2.0 × 2.3 in (≈ 50.8 × 58.4 mm) Optics Universal optics with increased depth of field Illumination LED Workholder 250-series heated manual workholder Power 208 V, 50/60 Hz Control Software-controlled automatic bonding programs Typical Process Capability The 8020 was developed to provide: Fine-pitch bonding Long, low wire loops Improved process control High throughput for leadframe and laminate packages Automated vision alignment and pattern recognition These capabilities were key selling points of the 8000 family. Kodszdgm Djpfx Abfodn Applications Plastic IC packages SOIC, QFP, TSOP Memory devices ASICs Hybrid microelectronics Chip-on-board assemblies Physical Characteristics Unfortunately, a complete factory datasheet with dimensions, weight, XY-table resolution, bond-force range, and supported wire diameters is not readily available in public archives. Most of the available information comes from listings of used equipment and K&S annual reports. If you need details such as: Bond force range (grams) Wire diameter range (e.g., 0.7–2.0 mil) XY positioning resolution Air requirements Maintenance manual Error codes or calibration procedures

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Dimension : 326 x 97 x 230 cm Kdjdpfxozbypyj Abfen Operating manual and wiring diagrams Video available when powered on  

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis Kjdpfx Absytgu Tsfsdn 360° rotation, 360° tilting (overhead), with height adjustment Excellent condition Height min: 1050 mm Height max: 2200 mm Total height: 3250 mm Rotational speed: 0.2 - 1.0 rpm Torque: 24,000 Nm Lifting speed: 1.5 m/min Handheld remote control

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Serial No: 3669 ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Serial No: 8293 Kdjdpfx Aew Rn Euebfon ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Serial No: KM 765 ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: new, functionality: fully functional, empty load weight: 700 kg, maximum load weight: 2,800 kg, axle configuration: 2 axles, tire condition: 100 %, color: silver, Year of construction: 2025, Autotransporter REPO R2P – Top Quality for Safe Vehicle Transport! This trailer is the ideal solution for the secure and professional transport of: • Construction machinery and excavators • Other vehicles ✅ Robust and durable construction ✅ High stability and safety during transport ✅ Perfect for both private and commercial use This car transporter stands out for its quality, reliability, and well-thought-out design – ideal for anyone aiming to deliver vehicles safely to their destination. Technical specifications: • Manufacturer: REPRO • Model: Vehicle Transporter • Permissible total weight: 3,500 kg • Unladen weight: approx. 700 kg • Axles: 2 • Tires: 195/50 R13C • Length: 5,290 mm • Width: 2,100 mm Kdedeyqyf Topfx Abfon • Loading platform length: 3,500 mm • Drawbar load: 150 kg The trailer is in absolutely as-new condition and ready for immediate use. Location: Rheda-Wiedenbrück Price: €4,790 net plus VAT If you are interested or have any questions, please feel free to contact us! Viewing on-site can be arranged by appointment.

Condition: refurbished (used), S&F Oscillating Screen | Screening Machine Type ASM-200 reconditioned | refurbished with new screen box, new bearings (flange bearings) and new vibration elements (rubber buffers) Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2004 Screening capacity: approx. 25 m³/h (for wood chips, depending on material) Fractions: 3 Screening area: 2.0 m² per screen mesh size Screening decks: 2 pieces Mesh size of the screen: - 1st screening deck: punched perforated plate screen, D = 40 mm or as per agreement - 2nd screening deck: punched perforated plate screen, D = 8 mm or as per agreement Kedpfxozbvy Io Abfjdn Drive power: 1,5 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 7040 Window Grey // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: good (used), Professional SUHNER Rotofix workshop grinder equipped with a flexible working shaft. Robust industrial design intended for grinding, polishing, and metalworking. Device from the renowned SUHNER brand – manufactured in Germany/Switzerland. Technical condition: the device is fully functional. Visual condition: see photos – normal signs of use. Important: The grinder has cracks in the housing, visible in the photos. Additionally, one of the legs/mounting elements has been repaired previously. This does not affect the normal operation of the device – the equipment is functional and ready to use. Kjdpey Uznfjfx Abfsdn Technical data: Manufacturer: SUHNER Model: Rotofix Motor: DKM 2 Power: 0.5 kW Power supply: 220/380V Rotational speed: 2800 rpm Frequency: 50 Hz cos φ 0.8 Protection class: IP41 Insulation class: E Included: SUHNER Rotofix grinder, flexible shaft, working end visible in the photos. Ideal for: metalworking workshop, polishing, grinding, metalworking, industrial and manufacturing tasks.

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs Kedpfeb Rnv Sox Abfodn cost of delivery cover customer Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: used, Make: Leomotor A/SType: KC 218B159 - LM 2000 - 12630 Ksdpfxedc A Rns Abfedn

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application Kjdpfxsyc Ig Ao Abfodn • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable Kdodpfx Abexl Dbtefjn • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Kjdpfxoxl Rf Sj Abfodn

Condition: new, For sale: professional MOTEK electric motor with brake. Brand-new unit, warehouse stored, never installed. Italian production – very high manufacturing quality. The motor is fitted with an electromagnetic brake – ideal for industrial applications, machinery, conveyors, pumps, and drives. Kdjdpfx Aoyvadmobfjn Technical specifications: Manufacturer: MOTEK Model: ET90SLa-2 Power: 3 kW RPM: approx. 2800 Voltage: 230 / 400 V Frequency: 50 Hz Current: 11.9 A / 6.9 A Power factor (cos φ): 0.81 Brake torque: 7 Nm Brake supply: 103 VDC / 230 VAC Duty cycle: S6 40% Weight: approx. 16.2 kg Country of manufacture: Italy Condition: New, warehouse stored Possible minor signs of storage