Used Widebelt Sanding Machine for sale (64,184)

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in Fpjdpot Tqy Ejfx Aaljg heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, used 2-belt sander 1x with continuous pneumatic pressure feed 1x sanding unit 100 mm vacuum clamping device Manufacturer: Heesemann Type: BA2 Machine no. 7304051 Motor: 7.5 / 11 kW Sanding length approx. 2550 mm Sanding width approx. 100 / 150 mm Belt length approx. 8500 mm Table size approx. 2550 x 1350 mm Throat (right) approx. 600 mm Upper belt cover Table lighting Vacuum clamping device with pump 9 vacuum suction plates Belt speeds 710 / 1430 m/min Sanding shoe 2450 mm Extraction connection D 180 / 250 mm Required space approx. 4500 x 1400 x 1800 mm Weight approx. 1500 kg Total connected load approx. 12.5 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Fpsdpoyvvr Ujfx Aaleg Delivery as seen, as inspected, without warranty or guarantee

Condition: used, Year of construction: 2000, used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T94 Year of manufacture: 2000 Machine no.: 22138 CE type tested Fpjdpfx Aoyvvr Isaljg GS wood dust tested Motor: 5.5 / 0.25 kW Sanding length: approx. 2600 x 960 mm Sanding width: approx. 960 mm Belt length: approx. 7800 x 150 mm Table size: approx. 2790 x 960 mm Throat depth right: approx. 850 mm Electric adjustment Upper belt cover Upper sanding support Table lighting Belt speeds: 1434 m/min Right-left travel Belt blow-off Sanding shoe: 300 x 140 mm Extraction connection: D 180 mm Required space: approx. 4000 x 1500 x 1500 mm Weight: approx. 1000 kg Total connected load: approx. 5.7 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Price of the above-mentioned machine available upon request! ----- Fedpfsxyafksx Aaljpg (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101780, total length: 4,300 mm, total width: 720 mm, total height: 1,390 mm, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 6 m/min, power: 8.4 kW (11.42 HP), We offer this used Rehnen KBA edge sanding machine, year of construction 2008. Manufacturer: Rehnen Model: KBA Year of Construction: 2008 Condition: used Category ID: 826 Type ID: 94 Type: edge sanding machine Aggregates total: 5 Moulding aggregates: 2 Sanding aggregates: 3 Workpiece width min mm: 60 Workpiece thickness max mm: 90 Feedrate max m/min: 6 Aggregates oscillating: Yes Sanding belt: Yes Profile sanding pad: Yes Fjdsyvfwropfx Aalspg Milling aggregate vertically scanning: Yes Stepless rotational speed control: Yes Clamping system: Upper pressure rolls Jump-in control: pneumatic CE marking: Yes Total connection kW 6,50 Required space LxWxH mm 4300x720x1390 Availability short-term, ex location customer! If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2022, condition: used, Number of sanding units 6 st. Sanding height max. 120 mm Fodsynnttspfx Aalopg output 12 kw

Condition: new, Year of construction: 2022, Belt width: 150mm Belt length: 2600mm Oscillation: yes Sanding rollers for curves: 1 Sanding unit can be swivelled: yes Table size: 750mm x 290mm Suction connection: 120mm Motor power: 3kW Fpodpfoiuld Dox Aalog Machine length: 1700mm Machine width: 700mm weight: 180kg

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, Lye Coating Machine Drautz RD 100 Compact design One-person operation & easy cleaning Double lye curtain With stripping unit Connection: 400V, 16A CEE plug Used machine Fpsdpfx Ajxmrbdealsg With warranty & spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Maintenance contract Service package Salting unit Delivery service Spare parts box for increased safety Training & commissioning Visit our extensive selection!

Condition: used, Year of construction: 1995, functionality: fully functional, grinding height: 100 mm, grinding length: 3,250 mm, We are offering this used Löffler KSL-100 MG edge sanding machine, year of manufacture 1995. Manufacturer: Löffler Maschinenbau GmbH Langenaltheim / Bavaria Model: KSL-100 MG Fedpeythu Iefx Aaljpg Serial number: 95.005/6/95 Year of manufacture: 1995 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, used, good condition, low operating hours Manufacturer: Johannsen Type: T82K Machine No.: 14883 GS-certified Motor: 7.7 kW Fpodpfjythb Usx Aalog Sanding length approx. 2700 mm Sanding width approx. 950 mm Belt length approx. 7800 mm Table size approx. 2800 x 950 mm Throat left approx. 850 mm Upper belt cover Adjustable upper sanding support Right-left run Belt blow-off Sanding shoe 450 x 140 mm Extraction connection D 160 mm Space requirement approx. 4300 x 1500 x 1400 mm Stock location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Fpodpfx Aoxrb Rfoalog Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer: Fladder - Type. Gyro 300 VAC Ex - Working width 1300 mm - Year of construction 1999 - Number of brush heads 6 pcs. - Rotating and oscillating sanding unit - 2 vacuum fans- Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection switch cabinet 1, machine 10kW - Electrical connection switch cabinet 2, vacuum fan, 15kW - Feed infinitely variable 2 - 8 m/min - Length 2070 mm Fpodpjvwa Drefx Aaleg - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate switch cabinet, Dimensions: W: 800mm, Depth: 400mm, Height: 1700mm - Location, in stock - Volt, HZ 400 / 50

Condition: used, Year of construction: 2005, machine/vehicle number: A41213AC1, Technische Daten: - Hersteller: Costa - Typ.: SA TS 1350 - Baujahr: 2005 - Arbeitsbreite: 1.350 mm - Schleifbandmaß: 2.620 x 1.380mm - Schleifhöhen: 3-160m - Vorschubgeschwindigkeit: 5 -25m/min. - 1. Aggregat: - Längschleifaggragat - Bandmaße: 2620 x 1380mm - Elektronischer Schleifschuh, System Costa - Tastrollenabstand: 32mm - Segmentbreite: 32mm - Motorleistung Antrieb, 11kW - Entstauberbürste Durchmesser: 180mm - Bedienseite: links - Höhenverstellung: motorisch - Vakuum Transportband - Gesamtanschluß 20KW / 43A - Breite: 1.924mm - Länge: 2.059mm - Höhe: 2.185 - 2.375mm - Absaugstutzen: D 2x100mm + 2x160mm - Volumenstrom: 4.830m³/h bei 24m/s - Druckluft: 6bar, 880NL/min. - Volt, Hz 400 / 50 - Spannungsschwankungen max. +/- 5 % - Gewicht 3.100kg Fpsdpfxjx Ex Tmo Aalsg - Standort, am Lager Blomberg

Year of construction: 2011, condition: used, functionality: fully functional, • Band running direction: LEFT to RIGHT, year 2011 #2010037 • 10 face grinding supports, 130 & 150 mm, with vertical oscillation • Horizontal oscillation for material thicknesses up to 100 mm • 1 lower & 1 upper chamfer milling support • 2 pneumatic lower & 2 upper chamfer supports Fpodpfx Ajyruvcealog • Belt infeed: motorised calibration/profile support • Belt outfeed: motorised drip rail support • Table widening console • Space requirement approx.: 725 x 180 cm

Condition: ready for operation (used), Year of construction: 1989, grinding belt length: 2,600 mm, grinding belt width: 150 mm, space requirement width: 900 mm, space requirement length: 1,650 mm, Langzauner LZK 3/2 edge sanding machine motor power 2,2kW Belt dimension 2600 x 150 mm Belt speed 20m /sec Fsdpfx Aaorgpw Aslopg Table dimensions 1000 x 350 mm Height adjustment 200 mm Weight 300 kg Space requirement 1650 x 900 mm Sanding unit 45° tiltable Veneer sanding unit Oscillation Feed console year of construction 1989 Condition: fully functional

Year of construction: 2005, condition: ready for operation (used), Two glass sandblasting systems from S.A.G. are available. 1) S.A.G. T4, year of construction: 2005, arrangement: vertical, max. blasting width: 3000mm, max. blasting height: 2250mm, max. glass height: 2400mm, glass thickness range: 3mm-40mm, blasting capacity: approx. 15m²/h, machine dimensions X/Y/Z: approx. 3800mm/3300mm/1900mm, weight: approx. 1550kg. 2) S.A.G. T3, year of construction: 2002, blasting width: 2800mm, blasting height: 1200mm, glass thickness range: 3mm-40mm, machine dimensions X/Y/Z: approx. 4100mm/2300mm/1900mm, weight: approx. 1350kg. Documentation available. An on-site inspection is possible. Fpodpeyrtamefx Aaljg

Condition: used, Year of construction: 2019, operating hours: 1,580 h, functionality: fully functional, total length: 1,100 mm, total width: 670 mm, total height: 1,440 mm, overall weight: 410 kg, power: 3.55 kW (4.83 HP), rotational speed (min.): 2,480 rpm, rotational speed (max.): 1,220 rpm, grinding width: 250 mm, The Bomar orbital 250 NS machine has served us well for edge grinding of profiles. However, as our production has changed, we no longer have use for it. The machine is ready for further use and available for immediate collection. We can arrange loading of the machine onto the customer’s transport. Fpjdpjyn Dyvofx Aaljg

Condition: new, Bernardo belt grinder MS 75 x 2000 DC-2 / 400 V Fodpfx Aaopag Tdolspg Technical specifications belt dimensions 75 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x W 200 / 75 mm surface grinding table 500 x 75 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 520 mm Height 1130 mm Weight approx. 104 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: new, Bernardo belt sander MS 75 x 2000 S-2 Technical specifications Belt dimensions 75 x 2000 mm Belt speed of 14.5 / 29 m / sec. How to contact with washer ø x W 200 / 80 mm Plan grinding table 460 x 75 mm Suction connection ø 100 mm S1 motor power output 100% 1.5 / 2.2 kW Fpsdod Du S Uopfx Aalsg Motor power S6 40% 2,2 / 3,0 kW Voltage 400 V Length 1080 mm Width 440 mm Height 1000 mm Weight 67 kg Scope of delivery • Grinding belt grit 80 • Hinged safety glass • Grinding and supporting table • Workpiece stop • Dust exhaust port • Motor protection switch • Rubber sanding drum • Graphite surface • Separate buttons • Base

Condition: new, Industrial belt sander Scantool 150 x 2000 with integrated with double suction Sanding belt 150 x 2000 mm Working width: - 150 mm Engine: - 4,8 HP Speed: - 34 m/sec Table height: - 475 to 1240 mm grinding belt dimensions: - 150 x 2000 mm surface grinding surface: - 530 mm Weight: - 115 kg The industrial belt grinder models Scantool with double extraction 75 x 2000 and 150 x 2000 are powerful quality machines, built according to the strictest environmental and safety regulations. The belt grinders are equipped as standard with motor brake, adjustable working height, eye protection, angle stop and motor protection switch with Zero-voltage release built. The low-noise machine with CE mark is ideal for grinding all metals. Motor protection switch with zero voltage release Separate emergency stop Motor Brake Adjustable angular stop Eye protection The infinitely variable working height enables an ergonomically correct working position Perfect construction for fast, effective and safe grinding Self-adjusting strap tension Danish top quality Fpsdpfx Aaeflt Alelog

Condition: new, Bernardo Belt Grinding Machine MS 150 x 2000 S-2 Tape dimensions 150 x 2000 mm Belt speed 14.5 / 29 m/sec. Fpjdpfx Aaod Rw Rhslog Contact disc x W 200 / 155 mm Flat grinding table 460 x 150 mm Suction connection of 100 mm Engine power S1 100% 2.1 / 2.8 kW Motor recording power S6 40% 2.8 / 3.6 kW Voltage 400 V Length 1080 mm Width 520 mm Height 1000 mm Weight approx. 85 kg

Condition: new, Bernardo belt sander MS 75 x 2000 S Fpsdjd Du S Hspfx Aalog Technical specifications Belt dimensions 75 x 2000 mm Belt speed 29 m / sec. How to contact with washer ø x W 200 / 80 mm Plan grinding table 460 x 75 mm Suction connection ø 100 mm S1 engine power output 100% 3,0 kW Motor power S6 40% 4,0 kW Voltage 400 V Length 1080 mm Width 440 mm Height 1000 mm Weight 66 kg Scope of delivery • Grinding belt grit 80 • Hinged safety glass • Grinding and supporting table • Workpiece stop • Dust exhaust port • Motor protection switch • Rubber sanding drum • Graphite surface • Separate buttons • Base

Condition: new, Bernardo Belt Grinding Machine KBR 100 x 2000 Duo belt dimension 100 x 2000 mm belt speed 15 / 30 m/sec. min./max. pipe diameter 20 - 76 mm slide adjustment 30° - 90 surface grinding table 400 x 100 mm contact wheel Ø x W 195 x 100 mm Fpedpod Id Ubefx Aalog suction connection Ø 2 x 100 mm Speed 1410 / 2850 rpm Motor output power S1 100% 2.2 / 2.8 kW (400 V) Motor input power S6 40% 3.0 / 4.0 kW (400 V) Machine dimensions (W x D x H) 750 x 1450 x 1160 mm Weight approx. 158 kg Features Constant belt tension due to spring-loaded tensioning device Standard with cylindrical grinding device for pipes diam. 20 - 76 mm Quick and easy adjustment of the desired grinding angle Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Large dimensioned plane grinding surface with protective cover Slow belt speed (15 m/sec.) optimal for grinding of stainless steel and aluminium User-friendly belt change, fast and uncomplicated Quick and easy change of grinding rollers without tools Different grinding angles from 30° to 90° possible without any problems Shorter processing times compared to milling Scope of delivery Sanding belt K 36 Rubberized sanding roller 1 pc. sanding roller for 3/4" tube (26/28 mm tube) 2 pcs. Hinged protective discs Cylindrical grinding device Grinding and support table 2 x dust extraction nozzles diam. 100 mm 2 pcs. chip collecting container Graphite coating Motor protection switch

Condition: new, Industrial belt sander Scantool 75 x 2000 sanding belt 75 x 2000 mm Working width: - 75 mm Engine: - 4,1 HP Speed: - 34 m/sec Table height: - 475 to 1240 mm grinding belt dimensions: - 75 x 2000 mm surface grinding surface: - 530 mm Weight: - 76 kg The industrial belt grinder models Scantool 75 x 2000 and 150 x 2000 are powerful quality machines, built according to the strictest environmental and safety regulations. The belt grinders are equipped as standard with motor brake, adjustable working height, eye protection, angle stop and motor protection switch with Zero-voltage release built. The low-noise machine with CE mark is ideal for grinding all metals. Motor protection switch with zero voltage release Separate emergency stop Motor Brake Fpoded Dw Ncopfx Aalog Adjustable angular stop Eye protection The infinitely variable working height enables an ergonomically correct working position Perfect construction for fast, effective and safe grinding Self-adjusting strap tension Danish top quality

Condition: new, Bernardo belt grinder MS 150 x 2000 DC-2 / 400 V Technical specifications belt dimensions 150 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x B 200 / 150 mm surface grinding table 500 x 150 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 600 mm Height 1130 mm Weight approx. 116 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button Fodpfxjpag Ttj Aalepg - Base frame