Used Used Complete Hot Filling Line Krones In Pet - 24000 Bph for sale (67,482)

Condition: used, Year of construction: 2022, Overview Complete PET bottling line for still mineral water in 6.0 L PET bottles with handle, max. 6,000 bottles/h. The heart of the line is an SMI ECOBLOC ERGON blow moulder-filler-capper combiblock, followed by handle application, rotary labelling and robot palletizing. Built in 2022, started up in 2023 and run only 3 to 4 times a year. Technical data - Year of manufacture: 2022, start-up 2023 - Capacity: max. 6,000 bottles/h - Product: still mineral water - Container: 6.0 L PET bottle, single bottle with handle and EAN barcode - Preform: 100% rPET, 86.5 g - Closure: 48/41 cap - Pallet: Euro pallet Scope of Delivery - Blow moulder-filler-capper combiblock | SMI | ECOBLOC ERGON 6-20-5 HC EV | blow moulder for 6 moulds (moulds not included), filler with 20 filling valves, capper with 5 capping heads, cap sorter and cap elevator | 2022 - Discharge conveyor | SMI | bottle conveying from the combiblock | 2022 - Accumulation table | SMI | FIFO | for filled bottles | 2022 - Bottle divider | SMI | DV 500S ERGON | 1 lane in, 2 lanes out | 2022 - Drying tunnel | EUROPOOL | before the handle applicator | 2022 - Handle applicator | TWINPACK | double lane, with barcode applicator | 2022 - Drying tunnel | EUROPOOL | before the labelling machine | 2022 - Bottle combiner | SMI | 2 lanes in, 1 lane out | 2022 - Conveyor | SMI | from the accumulation table to the labelling machine | 2022 - Rotary labelling machine | P.E. LABELLERS | ROLLMATIC MODULAR TOP SL 960 10T | 2022 - Conveyor | SMI | from the labelling machine to the palletizer | 2022 - Palletizer | BEMA | 2 FANUC robots, interlayer device | 2022 - Electrical panels | main distribution panels with all components for all machines and conveyors | 2022 - Format parts and spare parts | all available format and spare parts Not included Pressco preform and neck inspection, Heuft fill-level and cap inspection, pallet wrapper, preform and cap feeding from the pallet tipper to the hoppers, high-pressure compressor for the blow moulder, low-pressure compressors, utilities, piping and wiring from the main distribution to the machine panels, civil works. Knodpfjz Ag U Dsx Ahgjb Condition As-new condition, low operating hours. Annual preventive maintenance by the OEMs plus regular in-house maintenance. In production until the end of April 2026 and still installed; dry run on request, inspection by appointment. Electrical and mechanical drawings, PLC programs with backups, service and maintenance manuals and spare parts books are included. Availability From October 2026; the line must be dismantled by the end of October 2026. Dismantling, packing and truck loading can be arranged on request. Location: France.

Year of construction: 2025, condition: excellent (used), functionality: fully functional, Equipment: CE marking, Excellent, high-quality twin-screw compounding line. Knsdpfx Ahjzzni Hogsb Fully equipped and suitable for the production of food, bio-based, and synthetic polymer compounds. Two side feeders with weighing scales, Siemens control PLC system. Output: 250-350 kg/h, depending on the raw material. Main motor: 90 kW. PLA, PHA, PP, PET, PA, ABS, and all other polymers. The equipment is in very good condition and has been used very little.

Condition: excellent (used), 2 x KHS / GEA High Speed Keg Filling Lines Capacity: 1,000 kph Sizes: 15L, 20L, 30L, 50L 60L Keg Palletiser System also available. Location: Dublin Please contact Indassol for further details & pricing. Knedpfjxcinmsx Ahgjb

Condition: used, Year of construction: 2005, operating hours: 45,000 h, machine/vehicle number: LC514, Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow.  Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph Knsdpfx Ahjvgva Uogjb The Sidel SBO 8 blow molding machine, manufactured in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high pressure compressed air. Therefore, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Filling Monoblock The Sidel 36 36 9 filling monoblock, also from 2005, performs rinsing, filling, and capping in a single compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system delivers precise dosing, which ensures the final product quality. Labeling Machine The PE Labellers ROLLMATIC labeling machine, from 2005, applies wrap around labels to containers. Advanced technology positions labels accurately, thus enhancing the finished product appearance. This system works perfectly for PET water bottles, meeting the line speed and quality requirements. Shrink Wrapper The Sidel Cermex shrink wrapper, from 2005, performs secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. As a result, this process enhances logistics and product distribution while protecting items during transport. Conveyors in the Used Bottling Line SIDEL for still water up to 12000 bph The line operates with a complete system of conveyors, both air and ground. These conveyors maintain a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line This used bottling line delivers reliability and robustness, even with its 2005 manufacturing date. Moreover, all machines ensure a long operational life and reduce maintenance costs. The system efficiently bottles still water, ensuring a specific and contamination free process. Furthermore, SIDEL machinery integrates seamlessly with complementary components, such as the labeling machine and shrink wrapper, to maintain a uniform production flow. With a speed of 12000 bottles per hour, this line supports companies with consistent production demands. Conclusion The used SIDEL bottling line for still water up to 12000 bottles per hour provides a reliable and highly efficient solution for the bottling sector. Therefore, with robust machinery and an optimized configuration, it meets the needs of technicians and experts requiring a complete solution for producing PET water bottles.

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Kjdpfjl Hxnisx Ahgsnb

Condition: used, Year of construction: 2020, machine/vehicle number: M305, Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview This second-hand rotary monoblock combines a 24-head volumetric piston filler with an 8-head pick-and-place spindle capper, engineered for PET and HDPE bottles up to 1 L. Designed for industrial packaging environments, it is a robust component for a used bottling line handling non-pressurized products such as detergents and liquid soap. The machine features a painted iron frame, stainless steel panels, and a fully enclosed protective hood with safety devices, offering reliable performance in high-throughput operations. CE marking and complete documentation support integration within beverage production and home & personal care lines where non-isobaric, non-aseptic filling is required. Technical Specifications & Performance Data Configuration: Rotary filler–capper monoblock (24/8) Container materials: PET, HDPE Product types: Liquid detergents, liquid soap (suitable for non-carbonated, non-aseptic applications) Filling technology: Volumetric piston filling No. of filling valves: 24 Nozzle type: Mobile nozzles Max fill volume: up to 1 L Capper: 8-head pick-and-place pneumatic spindle capper Cap type: Plastic screw caps (one cap size currently tooled) Machine rotation: Clockwise Nominal speed: up to 5,000 bottles/hour (depending on product, bottle, and closure) Isobaric: No (non-pressurized filling) Aseptic: No Integrated rinser: Not included Filling Section Bottle infeed screw Central product tank with magnetic float switches 24 pneumatic cylinders, upper plates, lower plates Internal plates with stainless-steel/Viton sealing Opening/closing valves per station Capping Section 8 pneumatic capping heads with spindle screwing system Pick-and-place cap transfer Vibratory cap bowl (one cap size) Cap cup and cap chute (one cap size) Automatic cap elevator Mechanical & Structural Knodpfx Ajyhb R Sjhgeb Frame: Painted iron External panels: Stainless steel Protective hood: Enclosed with doors and safety devices Advanced Automation & Control Systems Pneumatic control panel for filler and capper actuation Electrical panel with CE-compliant components Wiring diagram included for streamlined commissioning Magnetic level control in product tank for stable filling Production Line Integration Capabilities This monoblock integrates seamlessly into second-hand used bottling line configurations for industrial packaging and beverage production of still, non-pressurized liquids. Its clockwise carousel rotation, bottle infeed screw, and cap-handling system allow straightforward connection with upstream conveyors, depalletizers, blow molding machines, and downstream labellers, inspection systems, and secondary packaging. Upstream compatibility: Blow molding machine, bottle unscrambler/depalletizer, conveyors Downstream compatibility: Labeller, inspection/quality control, packer/shrink-wrapper, palletizer Changeover scope: Supplied with 1 bottle format and 1 cap format; additional formats can be engineered on request Machine Condition &...

Condition: used, Year of construction: 1999, machine/vehicle number: M271, Used Filling Monoblock FIMER 20/20/3/3 up to 4500 bph This Monoblock efficiently processes still liquids, such as water and wine. Notably, FIMER manufactured this machine in 1999, ensuring an operational capacity of up to 4500 bottles per hour (BPH) for bottling 0.75-liter glass containers. Additionally, this unit currently remains in storage, ready for immediate use. Monoblock Structure and Rotation This machine operates with a clockwise rotation, which allows it to move containers smoothly and continuously through each treatment station. Consequently, this rotational design synchronizes the rinsing, filling, and capping cycles precisely, which helps to maximize productivity and minimize bottling interruptions. As a result, the machine maintains efficient workflow throughout the process. Technical Data and Electrical Specifications This unit connects to a 380 V power supply and operates with 6.5 kW of power at a frequency of 50 Hz. Therefore, these specifications match most industrial networks, providing ample power for each bottling stage. Rinsing Station With 20 grippers in the rinsing station, the machine treats each bottle with a single rinse to prepare it for filling. Given this setup, the Monoblock can rinse containers quickly and effectively, removing any residues and thus readying them for the filling phase. Filling Station in the Used Filling Monoblock FIMER 20/20/3/3 up to 4500 bph In the filling section, the machine uses 20 fixed valves with a gravity or light vacuum system, ensuring that it fills each bottle evenly. Moreover, this design maintains speed and precision, achieving a steady output of up to 4500 BPH. Consequently, this filling method suits still products like water and wine, preserving their properties and, equally important, preventing turbulence. Capping Station Kodpovgvd Hsfx Ahgenb The capping station is equipped with three heads for aluminum screw caps and three for straight cork stoppers. In this way, the machine can accommodate different closure types, including 31×18 mm caps. Therefore, this versatility ensures tight, protective seals on containers after filling. Safety Features of the Used Filling Monoblock FIMER 20/20/3/3 up to 4500 bph Finally, this Monoblock includes advanced safety systems, which protect both operators and containers throughout use. Furthermore, these safety features provide additional reliability, ensuring the machine’s consistent functionality.

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. Knsdpfx Ahjycfw Esgob A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Knodpfx Aexqzmwjhgob Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 - Operation: continuous from supply bin - Bin volume / drum Ø: 1.4 m³ / 1500 mm - Working height: 900 mm, left → right - Material / Housing: AISI 304 stainless steel + plexiglass - Safety: door switches, overload protection - Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar - Container size: round Ø ≤100 mm × 250 mm, larger on request - Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 - Filling: mass flow, 8 stations (expandable to 12) - Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h - Working height / direction: 900 mm, left → right - Product-contact parts: AISI 316, food-grade hoses, VITON seals - Tank / Pressure: 100 L, 5 bar - Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar - Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes - CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program - Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 - Operation: continuous rotary, 4 capping stations - Output: up to 5,000 containers/h - Container size: Ø ≤100 mm, H ≤300 mm - Working height / direction: 900 mm, left → right - Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools - Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar - Control: B&R controller, touchscreen, 200 format memories, password-protected - Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system - Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001

Condition: used, Complete Refrigerator Production Line – CANNON & NORTOOL (Sheet Metal, PU Foaming, Assembly, Charging & Packaging), used machine Fully integrated, high-capacity production line capable of manufacturing complete domestic and commercial refrigerators/freezers from raw sheet metal to final packaged products. Ksdpozzkd Tjfx Ahgonb Key Stations of the Production Line: - Sheet Metal Processing Station - Thermoforming (Vacuum Forming) Unit: CANNON FORMA vacuum forming machine (for ABS/HIPS inner liners and door liners). - Polyurethane (PU) Foaming Line: NORTOOL Oy cabinet and door foaming fixtures with high-pressure PU injection system. - Main Assembly Conveyor Line: Integrated assembly line for components, doors, and cooling circuits. - Evacuation & Gas Charging Station: High-vacuum pumping station and automatic refrigerant gas charging equipment. - End-of-Line Testing & Packaging: Electrical safety testing, leak detection, and automated packaging unit. Technical Details & Condition: Manufacturers: CANNON Group, NORTOOL Oy, and integrated custom machinery manufacturers. Condition: Used Inspection: Available upon prior arrangement

Condition: used, Year of construction: 2024, machine/vehicle number: M333, Used SIG Combibloc Filling Line – 26,500 BPH Technical Specifications & Performance Data This SIG Filling Combibloc HMR - 7478 is engineered for high-efficiency aseptic filling in small-format packaging. Manufactured in 2024, it combines reliability with precise dosing for demanding beverage production environments. Designed within the SIG-2 Combibloc ecosystem, it integrates advanced sterilization and high-speed handling to support continuous industrial packaging operations on a used bottling line or second-hand installation. Line Volume Speed Equipment Description Year of Manufacture SIG-B HMR - 7478 65ML, 125ML, Kedpfx Ahozdipuogonb 200ML 26500 H2O2 Supply System, Concentration Check 2024 Filling Machine CFA 1224 & Accessories 2024 CONVERSION KIT FOR FILLER SPEED UP 2025 Manufacturer: SIG Model: HMR - 7478 Rated Speed: 26,500 BPH Fill Volumes: 65 ml, 125 ml, 200 ml Sterilization: H2O2 system (SIG COMBI 2024) System Compatibility: SIG-2 Combibloc 1224 filler platform Upgrades: Filler speed-up conversion kit (SIG-2 2025) Formats: Compatible with 0.065L, 0.125L, 0.2L package sizes Advanced Automation & Control Systems The Combibloc leverages SIG engineering for controlled aseptic operation. The H2O2 sterilization module, updated in 2024, enables reliable decontamination of packaging pathways, while synchronized drives and servo-controlled movements maintain accuracy at high throughput. Operator interfaces, including a modern HMI touchscreen, are designed for intuitive changeovers and monitoring, supporting stable runtime in industrial packaging applications. Integrated safety logic and interlocked stainless steel guards protect operators and ensure hygienic operation during beverage production. Production Line Integration Capabilities Built for seamless line integration, the Combibloc interfaces with upstream and downstream equipment across SIG-2 Combibloc systems and compatible packaging machinery. It supports inline operation with conveyors, accumulation, and downstream secondary packaging. Quick format change principles accommodate small-size ranges from 65 ml to 200 ml, enabling fast product switches and efficient SKU management in complex used bottling line layouts. Machine Condition & Maintenance History Configured as a high-tier solution suitable for immediate integration, the unit is aligned with SIG-2 Combibloc filler standards and includes the available H2O2 system upgrade. A speed-up conversion kit (2025) is installed for enhanced capacity. This filling Combibloc presents...

Condition: used, Used Bottling Line HDPE for dairy products 7200 bph Kedpfx Ajwa Tqishgonb Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition. Container Type and Format Flexibility of the Used Bottling Line HDPE The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membrane. Its weight-based filling technology guarantees high accuracy and hygienic compliance, which is essential for dairy processing. In particular, this setup of the Used Bottling Line Serac for HDPE suits non-carbonated liquid products. Additionally, operators can upgrade the system to handle 500 ml bottles, with only minimal adjustments required. Unlike threaded capping systems, this line uses press-fit closure, which simplifies maintenance and enhances sealing consistency. Therefore, it provides an effective and reliable solution for bottling in sensitive food sectors. Bottle Feeding and Preparation Section At the start of the process of the Used Bottling Line Serac for HDPE, the bottle unscrambler, built by Lanfranchi in 2008, feeds loose HDPE bottles into the conveyor system in the correct orientation. Meanwhile, an Auto Jet Spray unit by Autojet Technologies (2012) cleans the bottle necks using high-pressure air jets, effectively removing dust or particles. Furthermore, Lanfranchi conveyors installed in 2008 transport bottles between stations while maintaining smooth line flow and bottle spacing. These components ensure mechanical integrity and reduce handling errors. As a result, the Used Bottling Line Serac for HDPE achieves both efficiency and reliability in its initial stages. Weight-Based Filling and Snap-On Capping The Used Bottling Line Serac for HDPE filling machine, manufactured in 2008, features 12 weight-based filling heads that deliver precise product dosing. Following the filler, a Zalkin cap sorter (U9000, 2008) orients and feeds snap-on caps to the SERAC cap press (CAP PRESSMP2, 2008). The press then applies each cap onto the bottle with controlled vertical pressure. Meanwhile, a foil applicator applies a seal to the container mouth before the cap is pressed. The absence of screw torque components simplifies operation and reduces wear over time. Sleeve Labeling and Final Packaging of the Used Bottling Line HDPE After capping in the Used Bottling Line HDPE for dairy products 7200 bph the labeling phase begins.

Condition: excellent (used), ELOPAK SHIKOKU ASEPTIC FILLING LINE Model S-PS80HA YOM 2008 Working hours - 9,000 hours. Line capacity for 3 streams - 8100 pcs./h, for two 7100 pcs./h for one 6000 pcs./h Carton format: 500ml, 750ml, 1000ml The line includes: - Elopak filler S-PS80HA for Pure Pak classic packaging material - 3 units of PURE-PACK PLA-S30 cap applicators for Pure-Twist 2U cap Kedpfx Aexdbwishgsnb - WA-Flex-30 packer - Conveyor system. - Conveyor lubrication station. - Spare parts a total of 4,000 dollars.

Condition: good (used), Year of construction: 2011, Turbo Rotary Rotary filling line Serial: R0061192 2011, Stainless, rotary filling line, consists of Turbo D253P depositor, denester, lid applicator and lid sealer and outfeed conveyor, previously used for filling four pots of sauce in a multipack, tooling dimensions 100mm x 100mm, touch screen controls, 3Ph Kjder Uftrepfx Ahgjnb

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Knodpfx Ahszxdqzsgob Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: used, Year of construction: 2012, operating hours: 60,000 h, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece weight (max.): 50 kg, working width: 1,350 mm, total length: 62,000 mm, total height: 2,800 mm, total width: 3,200 mm, type of input current: AC, working height: 120 mm, input voltage: 400 V, suction capacity: 36,000 m³/h, input current: 800 A, input frequency: 50 Hz, power: 440 kW (598.23 HP), compressed air connection: 6 bar, complete lacquering line: 1x Heesemann sander (LSM 8, 2006.10.251, 2006, 2x roller / 2x pads, ) 1x Safo brushing machne (2006, DCSF 135 2W) 1x Cefla lacquering spray Cabin (2012, Roctre D/HS) 3x Cefla hot air drying tunnel (2012, Aquadry LA ) 1x Cefla cold air drying tunnel (2012, Aquadry RLA) 1x UV lamp dryer ( 3lamps, UV-R SPM3/2500s) Knodpfev T Ttxex Ahgjb 2x hydraulic lifters (200-900mm height)

Condition: used, Bottling line for rinsing, filling, capping bottles + labeling. 1. Filling unit: Manufacturer: VIR MAURI (ITALY) Type: 9/24/1 Filler capacity: 3,000 - 4,000 bottles per hour (bph) Year of manufacture: 1992 / major overhaul: 2005 Current format: PET bottle, diameter 57 mm, height: 170 mm, cap 28 mm / PCO 1881 Capping machine: AROL - BETA PF1 2. Labeling machine: Kodpszymzfsfx Ahgsnb Manufacturer: KRONES Model: CANMATIC Paper labels with hot-melt adhesive Two gluing stations – one applies adhesive to the bottle, the other to the label Capacity: max. 12,000 bph Year of manufacture: 1985 / major overhaul: 2005 (by STM) Machines are regularly serviced and were in working order at the time of dismantling. Requires inspection before starting production. Includes conveyor belts as shown in the pictures.

Condition: used, Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a smooth and consistent flow, with correct alignment of preforms before the blowing process. Blow Molding Machine Next, the blow molding machine—a Krones Contiform Compact 10, year 2001—uses a Siemens S5 control system to manage heating and blowing phases. Consequently, it transforms preforms into precisely shaped PET bottles ready for downstream processes. Air Conveyors of the Used Bottling Line KRONES for still and sparkling water Once the bottles are formed, they are transferred via Krones AirCo air conveyors, model AirCo, year 2011. These conveyors extend for approximately 110 meters. Furthermore, they are controlled by inverters and a Siemens S5 controller, ensuring the transport to the next station. Mixing and Carbonation Unit Before filling, the product passes through the mixing and carbonation unit, a Krones MS, year 1992. This system mixes water and syrup, and then carbonates the product with CO₂ for sparkling drinks, or injects nitrogen for still water. Notably, the unit ensures continuous operation and mixing, thus maintaining product consistency throughout production. Filling Monoblock Knedpjwa Tqcefx Ahgob Following the mixer, the filling monoblock—Krones VK PET 100 SV K, year 1993—comes into action. Controlled by a Schleicher system, it includes: Bottle rinsing unit Isobaric filling machine, suitable for both still and carbonated beverages Capping unit for PCO 1810 PET bottles CIP (Cleaning-In-Place) connections Capacity to handle 1.5 l format Importantly, this unit represents the heart of the line, performing several critical functions within a compact and coordinated block. Labeling Machine Immediately after filling, a Krones labeling machine, model Canmatic, year 1997, applies labels to PET bottles with precision. As such, it ensures accurate positioning and high throughput, contributing to a professional final presentation. Shrink Wrapper Subsequently, the shrink wrapper—Dimac Green Star Big, year 2011—forms multipacks using shrink film.

Condition: used, Complete entry line, made by OTO MILLS - Double Decoiler with bottom/top hold-down roll - Strip peeler & Pinch-roll - Automatic strip joiner - Extra-sized horizontal accumulator Scope of supply includes: Double Uncoiler AD508SD - Double hydraulic expansible mandrel - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Pinch-Roll and flattener PRS566 - 3+2 rolls - Hydraulic roll positioning OTO Mills 100% automatic butt-welding unit GG566 - Complete automatic joining and welding process - Strip exit table with encoder - Motorized strip exit Pinch-roll OTO Mills Horizontal Accumulator - Heavy Duty horizontal accumulator Knedpsymatiefx Ahgsb - Motorized Feeding Pinch-roll – 106 KW - Rotating table with Main motor 106Kw - Approx. 6,5 meter external table - Exit strip guiding Turret OTO Mills Tube diameter: 76,1 - 168,3 mm Material thickness: 2 - 6.3 mm Double Uncoiler: AD508SD Pinch-Roll and flattener: PRS566 100% automatic butt-welding unit: GG566 Accumulator: Heavy Duty horizontal accumulator

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2025, For sale: Welding and deburring line with a turning table for PVC windows. The line consists of: - Welding machine - HOLLINGER MSP, year 2005 - Transport and cooling table - HOLLINGER SVS, year 2005 - Automatic cleaning machine with welded frame turning - ROTOX EPA 472, year 2005. Ksdpsz A R I Eofx Ahgsnb The production line was only used in Germany and is in very good condition, having been regularly serviced. Negotiable price: 25,000 euros + VAT.

Condition: used, 01. Product to be filled “CSD” 02. Type of Bottle RoundBottles 03. M.O.C. of the Bottle PET Bottles 04. Fill Volume / Bottle sizes 500ml 05. Type of Caps Screw Caps 06. Type of Labels BOPP 07. Output required 416 Bottles Per Minute on 500 ml     BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION: Used blow molding machine for PET bottles with production capacity up to 25,000 bph with the 500ml format. Year of construction, 2007. Used blower complete with Octagon tipper, Air recovery system, preform hopper. This machine is immediately available for sale and in case of request we can carry out pre-production maintenance. Detached from production in fully functional status is excellent opportunity for used equipment. We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request. Air conveyor system NEW/used revised 2024   NEW RINSER /FILLER/SCREW CAPPER, SPORT CAPPER: Auto Rotary 70 Head Rinser Cum 70 Head Counter Pressure Filling Cum 15 Head Rotary Screw Cap Sealing Machine,AND 15 HEAD SPORT CUP system Model Uinibloc : 70x70x15x15, fitted with Disc cap feeder, chute&shoe, SS safety hood, PLC/HMI of Schneider make, Electronic BPM meter & Counter, sensor at in feed & out feed. Fitted with one set of change parts of 250ml PET bottle. All Product Contact Parts like Tank, Valves & all product contact parts will be SS316Grade. Output – 416BPM on 500 ml bottle. Fully Automatic Bulk Cap Elevator Additional Set of Change Parts If Required RINSING SECTION : TOP OF THE ROTARY RINSSER S. SLAT CHAIN CONVEYOR Body fabricated out of pre-polished S.S. Sheets, of 8’ length for carrying empty bottles to water rinsingnozzles and rinsed bottles to the Filling Machine. BOTTLE GRIPPING HEADS The gripping heads hold the bottles by neck. The bottle carrying grippers are supported by carousel thatby turning makes the grip lever arms slide on a fixed helical guide. In this way the bottles areturned upside down to have the openings atthe bottom to coincide with spray nozzle. AIR CLEANING PROCESS Kedpfx Ajvgt Upjhgonb The bottles when rotated are brought into theline with the fixed nozzle in such a way thatits opening partially contains the nozzle. Airjet cleaning air sprayed inside the bottle forpresettime. VACUUM PROCESS The bottles when rotated are brought into the ine with the fixed nozzle in such a way that its openingpartially contains the nozzle.

Condition: used, Year of construction: 2006, operating hours: 67,130 h, machine/vehicle number: R77, Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph Upgrade in 2024, excellent condition and warranty on the replaced spare part Overview of the Used Filling Machine A3 Flex The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers advanced aseptic filling performance for dairy-based beverages and fruit juices. Originally, Tetra Pak manufactured this A3 FLEX 100V model in 2006. However, in 2024, the company upgraded it to the 100V version. As a result, the machine now complies with modern standards for process control, performance, and operational safety. Therefore, it remains a highly relevant and reliable option for current production needs. Packaging Format and Technical Configuration The Used Filling Machine A3 Flex supports the 1000 ml Edge format, a version of the Tetra Brik package that features an inclined top edge. Consequently, the design improves ergonomic handling and simplifies the application of screw caps. Furthermore, the system uses a single filling valve, which aligns with the standard architecture of A3 Flex machines. These machines perform the filling process vertically under aseptic conditions. In addition, the setup preserves a sterile environment throughout all stages: forming, filling, and sealing. Output Capacity and Operational Hours The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers a nominal output of 7000 packs per hour. Hence, it ranks among mid-to-high performance solutions in the aseptic filling sector for non-carbonated beverages. Over time, the machine has logged 67,130 working hours, which technicians can use as a key metric for technical assessment. Despite the machine’s age, its solid maintenance history and the 2024 upgrade ensure that it can continue operating effectively in demanding production environments. Product Applications and Hygienic Design The Used Filling Machine A3 Flex handles dairy and juice products with ease. Moreover, it meets all aseptic packaging requirements, including sterilization and hermetic sealing. The manufacturer built the internal circuits and filling chamber with stainless steel. As a result, the design enables efficient sanitation and ensures compatibility with clean-in-place (CIP) procedures. Additionally, the hygienic design aligns with current food safety standards for the beverage industry, thus making it suitable for sensitive applications. Integration and Control System of the Used Filling Machine A3 Flex Ksdewbhdaepfx Ahgjnb The Used Filling Machine A3 Flex offers a compact footprint and a modular structure. Therefore, technicians can integrate it seamlessly into existing bottling lines. Alongside its structure, the machine includes a centralized HMI control panel. Operators use this interface to manage daily activities. Not only does it simplify the workflow, but it also allows for quick adjustments to production parameters or packaging formats. Conse...

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. Kodpfexcnxdsx Ahgjnb The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste Knedpfx Aey Avqdjhgeb • Compatible with automated loaders and CNC cutting systems Advantages • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, product height (max.): 450 mm, product height (min.): 90 mm, product length (min.): 230 mm, product length (max.): 800 mm, product width (max.): 500 mm, product width (min.): 120 mm, Equipment: documentation/manual, The production line is a complete system suitable for packaging all types of AFH tissue paper products. The line begins with a conveyor belt which serves as a buffer. The end of the conveyor belt can be lowered, enabling the machine to handle all types of hand towels. Following the conveyor belt is an Italian-made MAC DUE stacker, which is capable of stacking toilet roll in 1, 2 or 3 layers. This is followed by another conveyor belt, which connects the stacker to the packaging machine. Next comes the CB 150A universal, fully automatic packaging machine, designed in Italy for packaging AfH tissue products. The packaging machine is highly flexible, easy to set up and operates automatically. The maximum packaging speed is 5 packs per minute. Following the packaging machine is a shrink tunnel, which is integrated into the packaging machine. The MAC DUE HMI is a new DELTA model. The CB 050A packaging machine’s PLC (OMRON) comes with a new program; the electrical cabinet was rewired in 2022, and a diagram of this has also been drawn up, which I will provide with the machine. This packaging machine’s HMI is also a new Delta model. I will provide the source programs for both the HMI and the PLC with the machine. The production line was dismantled on 12 July 2026 due to the purchase of a new machine. Knodszvym Tspfx Ahgob The machine is packed and in storage, ready for delivery at any time. Commissioning can be arranged on request, but it is straightforward to install and I can also provide online support. Numerous videos have been made of the machine.