Used Trafostation 400 Kva 20Kv 2016/2013 Scheidt/Cg Power for sale (52,005)

Condition: excellent (used), Year of construction: 2008, operating hours: 8,000 h, Four-sided planer Weinig Model Powermat 400 LE - machine with ribbed table Dwsdpjwybrnsfx Albeb Year of manufacture: 2008 Operating hours: 8000 Maximum working width: 230 mm Maximum working height: 120 mm The machine is equipped with 5 spindles featuring the Powerlock system Spindle configuration: - bottom 5.5 kW - left and right – 7.5 kW each - top – 7.5 kW - bottom – 7.5 kW Spindle speed: 6000 rpm Feed speed steplessly adjustable via inverter: 5 – 30 m/min Electronic spindle positioning – Memory system The machine is in very good technical condition, complete with cutter heads.

Condition: good (used), Year of construction: 1994, operating hours: 7,430 h, functionality: fully functional, overall weight: 38,000 kg, fuel type: hybrid, power: 1,500 kW (2,039.43 HP), output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Wärtsilä, Diesel Generating Set – 1.5 MWe / 50 Hz Wartsila Vasa 4R32 LN-E This Wartsila diesel generating set has been used exclusively for testing purposes by VTT Technical Research Centre of Finland and has accumulated only 7,430 operating hours since new. Dodpfjyfflzsx Albowb Originally, it was built as a conventional diesel engine capable of burning various heavy fuels with viscosities of up to 730 cSt at 50°C. The engine was subsequently upgraded by Wartsila to comply with the LN-E model specification for their 32-series engines and it was equipped with adequate fuel feeding systems, cylinder heads, pistons and liners for dual fuel (DF) and gas diesel (GD) operation. The upgrade included the installation of anti-polishing rings, an increase in engine output, and the implementation of a completely new control system. The unit has been used to test various fuels and components on behalf of Wartsila. It has been exclusively serviced by Wartsila and remains in good technical condition. Over the years, Wartsila has installed new components and control systems. At present, the engine is equipped to operate in three different modes: As a conventional diesel engine using heavy fuel oil (HFO); As a Wartsila 32DF (Dual Fuel) engine using natural gas and light diesel oil; As a Wartsila GD (Gas Diesel) engine, where gas is compressed to high pressure and injected into the cylinder, ignited by a pilot dose of light diesel oil. Naturally, to switch between modes, certain components—such as the turbocharger, cylinder liners, pistons, and cylinder heads—must be changed. All necessary components and much more additional spare parts (some brand new) are coming together in the same package. We can specify more in details upon request. Technical support for on-site installation can also be provided, subject to a separate agreement. The machine is currently located in Kotka and can be shipped by sea to any suitable destination port. Quotations are available upon request.

Condition: excellent (used), Year of construction: 2016, operating hours: 25,187 h, functionality: fully functional, The Mazak 3D Fabri Gear 400 II is a 6-axis 3D laser cutting machine designed for cutting tubes and profiles, specifically engineered for processing large-diameter materials and structural shapes. The 2016 model is typically equipped with a 4.0 kW Panasonic CO2 laser resonator and specialized 3D heads for complex cross-sections. Key technical parameters (2016 model): Laser type: 4.0 kW (4000 W) CO2 resonator Maximum material length: 12,000 mm (12 m) Maximum tube diameter: approx. 406 mm (16") Maximum square profile: 254 mm x 254 mm (10" x 10") Axes and movement: 6-axis control (X, Y, Z, A, B, C) Control unit: Mazak FX Maximum workpiece weight: approx. 480 kg Functions and capabilities: Material types: Carbon steel, stainless steel, and structural profiles (I-beams, channels, angles). 3D head: Rotatable 3D laser head with a touch sensor (probe) and an auto-focus system. Automation: Weld seam detection and automatic material measurement. Optional equipment: Threading unit (enables cutting and threading in a single cycle) V-TYPE FEEDER Machine operating hours: 25,187 hours. Dsdpezg U Tpjfx Albswb Link to machine video:

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 500 mm, pressing force: 400 t, DGUV certified until: 07/2027, year of last overhaul: 2017, sheet thickness steel (max.): 7 mm, Edelhoff DARRW 2/400 – 400-ton pressing system with ALBA strip feeding system For sale is a complete mechanical pressing system, manufactured by Gebr. Edelhoff, type DARRW 2/400, manufactured in 06/1991, with an ALBA strip feeding system, coil unwinder, straightening unit, roller feeder, modernized Siemens SIMATIC control system, UNIDOR process monitoring, and MFP Z-conveyor, manufactured in 2025. The system is installed and can be inspected and demonstrated after prior appointment. Technical data of the press: Manufacturer: Gebr. Edelhoff Werkzeugmaschinenfabrik Type: DARRW 2/400 Year of manufacture: 06/1991 Machine No.: 9131 Design: mechanical twin-column stamping press Pressing force: 400 Mp / approx. 4,000 kN Table size: 1,100 × 1,500 mm Stroke adjustment: 40–120 mm Ram adjustment: 120 mm Stroke rate: 20–80 strokes/min Motor power: 45 kW Electrical system: 380 V Control system / process monitoring The machine control system has been modernized. Equipment includes: Siemens SIMATIC control system UNIDOR process/pressing force monitoring with visualization Screen-based operation Separate main control panel Additional machine-side control panel Integration of the strip feeding system into the system control Extensive switching and control technology ALBA strip feeding system Complete strip feeding system with several ALBA components, consisting of: Coil unwinder Coil holder with spreading mandrel Hold-down / guide arms ALBA straightening unit ALBA roller feeder Separate control unit for the strip feeding system Technical data of the strip processing: Strip width: max. 500 mm Material thickness: max. 7 mm Dedpfozv Ukgex Albewb Material cross-section: max. 1,800 mm² Strip speed: up to 25 m/min 2 transport rollers 8 straightening rollers Year of manufacture of ALBA components: 1991 The strip feeding system consists of several ALBA units with separate nameplates. Part removal MFP Z-conveyor Year of manufacture: 2025 Automatic part discharge from the pressing area Modernization / overhaul The pressing system underwent extensive overhaul in the years 2017–2019. The documented costs for the overhaul amounted to approximately €92,000. In addition, the system was equipped with an MFP Z-conveyor, manufactured in 2025. Inspection The press was last inspected on 07.07.2026 according to DGUV Information 209-030. Condition / Inspection The complete system is currently installed at the production site. Inspection and demonstration under production conditions are possible after prior appointment. Dismantling, relocation, and reinstallation Upon request, in addition to the machine sale, we offer the complete technical handling of the relocation: Professional dismantling of the system Preparation for loading and transport Relocation to the new production site Reinstallation and assembly at the destination Further services according to individual agreement The scope of services can be individually agreed upon and offered according to the buyer's requirements. Financing If the buyer has sufficient creditworthiness, a financing solution can be offered or arranged for the acquisition of the system. Details, term, and conditions will be determined after individual assessment and agreement. Further technical documents and information are available upon request. Technical data provided to the best of our knowledge and according to the available machine documentation or nameplates. Subject to errors and prior sale.

Condition: used, Year of construction: 2013, - Brand: JLG - Type: E400 AJPN - Year of construction: 2013 (1X) - Year of construction: 2011 (2x) - Weight: 6829 kg. - Year of manufacture: 2011 - 2037 hours: €12950,- - Year of manufacture: 2011 - 2086 hours: € 12,950,- - Year of construction: 2013 - 1629 hours: € 15750,- - Working height: 14 meters - Lateral reach: 7.9 meters - Lifting capacity: 230 kg. - Rotatable work tray - Rotating jib - Drive: Battery - Built-in battery charger (220 volts) Dwedpfx Ajy Itt Tjlbeb - Non-marking tires - New safety inspection possible - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: JLG *Type: E400 AJPN * Weight: 6829 kg. * Construction year: 2013 - 1629 hours * Working height: 14 meters * Lateral reach: 7.9 meters * Lifting capacity: 230 kg. * Drive: Battery

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Perkins 2206A-E13TAG2, General information Field of application: Construction Weights Empty weight: 3.161 kg Functional Generator capacity: 400 kVA Dimensions of cargo space: 380 x 113 x 216 cm CE mark: yes Other information Fuel consumption: 52,6 L/Hour at 75% Load Prime Generator: FG Wilson FG29A280 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 888 l Production country: CN Djdpfsxwhunex Albewb Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: new, For sale: Professional power controller (thyristor-based) Advanced Energy Thyro-A series. The device is NEW – never used (warehouse stock). High-end industrial equipment designed for advanced production installations. 🔧 Technical specifications: Manufacturer: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Voltage: 400 V Current: 350 A Output: Relay Out 4A / 250V Type: thyristor power controller (SCR) ⚙️ Applications: Dedpfx Aoyw T Ipolbswb industrial furnaces heating systems industrial automation power control in production lines 📦 Included in the set: 3x Thyro-A modules industrial enclosure / heat sink cooling fan full set as shown in photos ✅ Condition: NEW – unused May show minimal signs of storage. Fully functional.

Condition: used, Year of construction: 2021, functionality: fully functional, disc diameter: 400 mm, rotational speed (min.): 915 rpm, power: 1.5 kW (2.04 HP), grinding wheel diameter: 400 mm, type of input current: three-phase, Equipment: emergency stop, motor brake, Felder disc sanding machine CB 400 D, acquired on April 13, 2021, for precise disc sanding of wood workpieces. Suitable for edges, end faces, small components, curves, and fine adjustments in the woodworking shop. Key technical data: - Machine type: Disc sanding machine - Model: CB 400 D - Sanding disc: approx. Ø 400 mm - Speed: approx. 915 rpm - Motor power: approx. 1.5 kW - Voltage: 400 V Dedpfx Ajztxpnslbowb - Dust extraction connection: approx. Ø 100 mm - Table size: approx. 460 x 200 mm - Table tilt: approx. -45° to +45° - Dimensions: approx. 770 x 460 x 1130 mm Features: - Practical machine for precise finishing and clean workpiece edges - Suitable for edge and contour sanding, adjusting wood components, and finishing work - Of interest for carpentry shops, model making, training, and makerspaces Warranty exclusion

Condition: used, Year of construction: 1998, operating hours: 60,000 h, functionality: fully functional, overall weight: 9,000 kg, Combined heat and power plant with generator. Manufacturer: GE-Jenbacher Type: JMS 312-GS-B.L Year of manufacture: 1998 Operating hours: approx. 60,000 hours Rated output: 495 kVA / 526 kW electrical Weight: 9,000 kg Dwjdozwb E Tspfx Albsb The unit operated in our facility until recently and was in perfect condition, running smoothly and cleanly. It was regularly serviced by a specialist company. Purchase price (net): €30,000 (negotiable) plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing options available If desired, we can arrange suitable financing through our company. Please contact us. Subject to changes, errors and prior sale. Sale is without guarantee or warranty and only to business customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: new, Year of construction: 2025, machine/vehicle number: 2541925, fuel type: diesel, motor manufacturer: Kubota V2203M, General information Field of application: Construction Weights Empty weight: 1.020 kg Functional Generator capacity: 20 kVA Dimensions of cargo space: 204 x 100 x 141 cm CE mark: yes Other information Fuel consumption: 3.8 Liter/Hour at 75% Load Generator: Leroy Somer TAL040-F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 150 l Production country: ES Dsdpfx Asx N Duwjlbewb Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, The aggregate is new, complete incl. control, diesel tank, exhaust and batteries. Description Model: NWR44 Ricardo engine newpower generator genset Continuous power: 30,4 kW / 38kVA Maximum power: 33,5 kW / 41,8 kVA Engine : Kofo RIcardo N4100DS-38, 4 cylinders water cooled Connection : Power switch Dedpfjnkb U Dsx Albswb Frequency : 50 Hz. Voltage : 400/230 V incl. mechanical speed control , AVR, battery charger, galvanized sound insulation, cooling water heater, control unit : Comap AMF8, mains power supply Dimensions: 2230x960x1260 mm Weight: approx. 900kg Diesel tank: 102 L. At 100% load : 7,9 L/h At 75% load : 6,3 L/h At 50% load : 4,2 L/h Mains monitoring, mains supply Soundproofed Ready for immediate use. additional costs 63A Automatic transfer switch: € 500 100A automatic changeover switch: € 620 Shipping: - A worldwide transport incl. unloading is possible for an additional charge. - To be able to quote an exact freight price please send us an inquiry with your data and complete address -Deliverable from April

Condition: used, Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 900, power: 3 kW (4.08 HP), Description Type: EH 400/1 Serial number: 900 Year of manufacture: 2004 Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes Device description: Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Material discharge container and lower motor system Dedpfx Alszgblrobewb Machines of this type are generally used to shred the following materials: Plastic Rubber Wood Light metal shavings Electronic scrap

Condition: excellent (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, Reishauer RZ 400 Gear Grinding Machine 1-2 shift operation; excellent condition; fully equipped all-inclusive machine Machine under power for inspection during ongoing production Year of manufacture: 2006 Control: Siemens 840 D Machine dimensions: approx. 3.3 m (L) x 2.7 m (W) x 2.5 m (H) Machine weight: approx. 16,000 kg Condition per documentation: very good condition, complete with tailstock, oil mist extraction, filter and cooling system (Hoffmann HSF), no defects reported, sale due to low utilization Workpiece Data Workpiece diameter: 10 to 400 mm Number of teeth: 5 to 999 Face width: 0 to 300 mm Centres distance: approx. 60 to 700 mm Module: 0.5 to 8 Pressure angle: 14° to 30° Helix angle: ±45° Max. workpiece weight: 300 kg Axis Data B-axis grinding spindle: power 10 kW Speed: 4010 rpm Peripheral speed: 63/72 m/s dynamic balancing included C-axis workpiece spindle: torque 180 Nm, max speed 480 rpm Z-axis travel: 300 mm, feed rate 0 to 5.0 mm/rev X-axis travel: 490 mm, rapid traverse 15 m/min Y-axis shifting travel: 220 mm P-axis grinding oil nozzle travel: 80 mm W-axis tailstock travel: 640 mm, speed 12 m/min W1-axis indexing sensor travel: 250 mm, speed 45 m/min A-axis grinding head swivel range: ±48°, swivel speed 28°/s Equipment Tailstock CNC dressing unit type RP2-SW, semi-automatic Oil mist extraction Filter and cooling unit: HOFFMANN Filter type HSF 100 Dwedpoxupfcjfx Albeb One flange with used grinding wheel Two measuring probes / meshing sensors Software: MMINC Version 07.02, PLC Version V3.075A

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2093249C, total height: 1,050 mm, total width: 680 mm, input voltage: 400 V, power: 8 kW (10.88 HP), workpiece weight (max.): 175 kg, pressure: 2 bar, input frequency: 50 Hz, Professional, floor-standing Schultheiss VPC 055 / 400 Sp induction vacuum pressure casting machine. Manufactured in Germany, this heavy-duty unit is designed for large-volume, high-capacity jewelry production and industrial casting components where absolute speed and thermal stability are required. Equipped with a powerful 3-phase induction heating system and a digital West 6100+ temperature controller, it delivers rapid melting cycles and superb alloy homogeneity through an integrated mixing booster effect. Key Features: - Industrial Capacity: Equipped with a large crucible capacity, optimized for production-level batches. - 3-Phase Power System: 400V supply guarantees rapid melting times and consistent duty cycles. - Advanced Digital Monitoring: Integrated West 6100+ precision controller for exact thermal management. - Precision Vacuum & Pressure: Excellent fill rates for incredibly fine filigree details or heavy solid trees. Dsdpfxey Tbigs Albswb Technical Specifications: - Manufacturer: Schultheiss GmbH (Germany) - Type: VPC 055 / 400 Sp - Year of Manufacture: 2009 - Serial Number: 2093249C - Voltage: 400V / 50Hz (3-Phase) - Power: 11 kVA / 16 A (approx. 8 kW active power) - Max. Temperature: 1,450°C - Casting Pressure: Up to 2.0 bar - Condition: Great condition, fully functional, clean casting assembly, and clear interface controls. VPC 066

Condition: excellent (used), Year of construction: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 2016 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy efficient and extremely quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetallic Main machine motor - servo motor with inverter drive - energy saving Dwjdpfszy Ib Tex Albeb Proportional valve on injection unit – precise injection Self-sealing nozzle Arburg Multilift Select 6 kg traverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes driven by servo motors (electric); axes B and C Travel paths in axes: X-600, Y-800, Z-1000 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 2210 kg Length/Width/Height: 3.18x1.43x1.98 m All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 479, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching STV-ST61-30-40 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: STV-ST61-30-40, year of manufacture: 2017 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Dwedpoulayxofx Albsb Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR125 Ricardo Motor Newpower generator generator set Continuous power: 110 kVA / 88 kW Maximum power: 120 kVA / 96 kW Engine : Kofo RIcardo R6105ZLDS, 6 cylinder water-cooled Dwodpfx Aenkar Uolbjb Connection: circuit breaker Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3030x1130x1510 mm Weight: approx. 1619kg Diesel tank: 125 L At 100% load: approx. 23.2 L/h At 75% load: approx. 17.5 L/h At 50% load: approx. 11.8 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs 250A automatic switch : € 1080 Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR55 Ricardo Motor Newpower Generator Generator set Maximum power: 40kW / 50 kVA Engine : Kofo RIcardo N4100ZDS-42, 4 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, galvanized soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 2280x1030x1260 mm Weight: approx. 1020kg Diesel tank: 118 L. Dsdpfx Asnkavislbowb At 100% load: 8.5 L/h At 75% load : 6.5 L/h At 50% load : 4.4 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs 63A automatic switch: € 500 100A automatic switch: € 620 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: Used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, with additional equipment (detailed below). First owner. Overhauled last year (belt and drive rollers replaced, glue pot regenerated). The edge banding machine operated on one shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and the ability to operate in continuous mode. Price: 85,000 PLN net. Excellent condition - the machine is in full working order, regularly serviced, and ready for operation without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by prior appointment in Borów (83-332). Please contact us by phone for additional information, as well as videos and pictures of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA), polyurethane (PUR) glues, and zero-joint systems. - Edge dimensions: Edge banding from 0.4 to 3 mm thick on components from 10 to 60 mm thick. - Power supply and power: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Aggregates: Equipped with a scraper, chamfering cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic edge alignment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Dwodpezizabefx Albjb Detailed description: Narrow band edge banding machine from the German company Hebrock with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick on components from 10 to 60 mm thick, as well as pre-milling the panel with diamond cutters. The machine is optimally equipped for each type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual aggregates. The patented Hebrock system in the edge milling aggregates (consisting of adjusting the lower and upper cutter from outside the machine – during operation), as well as the automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendly operation. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max. edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 kW motor • Glue heating time: 6 min • Total power consumption: max. 14 kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Extraction nozzle diameter: ø 140 mm, • Required extraction performance: 24 m3/min • Min. air velocity in the extraction nozzle: 20 m/s • Required vacuum in the extraction nozzle: 1300 Pa

Condition: good (used), Kistler NC joining module with dual-station/spindle unit Kistler NCFH 60 servo press with feed slide & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial dual-station/spindle unit designed for automated series production (e.g., friction welding or precision pressing). The system is characterized by exceptional precision, integrated force-displacement monitoring (piezoelectric sensor technology), and an extremely robust design capable of withstanding continuous industrial loads. Dedpfx Aezcpnzolbowb Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electronics manufacturing, or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Using built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process in relation to position. Flexible process control: Enables advanced functions such as "joining to block," position-controlled pressing, or force-controlled joining (when combined with a suitable controller, e.g., Kistler maXYmos). Automated workpiece holding: The coupled spindle station features an automated clamping function (pneumatically or hydraulically actuated via integrated cylinders), making it perfect for automated series production and assembly lines. Sturdy machine bed: The entire mechanical assembly is mounted on a heavy-duty welded steel frame to withstand the immense forces (up to 6 tons per side) generated during operation. Joining module manufacturer: Dr. Staiger Mohilo+Co GmbH / Kistler Group Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal force: 60 kN (equivalent to a pressing force of approx. 6 tonnes) Max. total spindle stroke: 400 mm Max. travel speed: 300 mm/s Motor type: AC hollow-shaft servo motor (165H-180E) Holding brake: 18 Nm Certification: CE marking Scope of delivery: Kistler NCFH 60 joining module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: new, For sale is a new, unused three-phase electric motor, LOHER ANGA-355LB-04A, with a power rating of 270 kW. The motor comes from warehouse stock (NOS – New Old Stock). It has never been installed or used. Its technical and visual condition is very good, with only minor signs of storage. Manufactured in Germany, it features a robust, industrial design. It is ideally suited for driving pumps, fans, compressors, crushers, conveyors, and other industrial machines. Technical specifications: Manufacturer: LOHER Model: ANGA-355LB-04A Power: 270 kW Rotational speed: 1490 rpm Frequency: 50 Hz Voltage: 400/690 V (Δ/Y) Voltage range: 380–420 V Δ / 655–725 V Y Power factor (cos φ): 0.85 Dwedezn Awxspfx Albob Protection class: IP55 Insulation class: F Mounting design: IM B3 Standard: EN 60034 / IEC 38 Country of manufacture: Germany

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg Dwsdpfozvm Azsx Albjb

Condition: good (used), Year of construction: 1988, Three-phase power transformer from ASEA LEPPER with a rated power of 800 kVA for voltage conversion from 20 kV to 400 V. Manufacturer: ASEA LEPPER Type: DFVHK Year of manufacture: 1988 Rated power: 800 kVA Rated voltage, high voltage: 20,000 V Rated voltage, low voltage: 400 V Dwedpfx Aljzttf Debjb Rated current, high voltage: 23.1 A Rated current, low voltage: 1,155 A Frequency: 50 Hz Vector group: Dyn 5 Rated short-circuit voltage: 5.7 % Protection class: IP23 Cooling method: AN Insulation class: F Maximum short-circuit duration: 4 s Total weight: 3,450 kg Quantity available: 2 units Price: €7,700 per unit EXW Assistance with delivery and loading can be provided by the seller. No sale for scrap value. Location: Munich

Condition: used, Year of construction: 2016, For sale: AEG Protect 8.33 / 40 kVA industrial UPS system with two additional battery cabinets. This system is designed for reliable uninterruptible power supply in industrial environments. UPS Type: Protect 8.33 40-400-384-400 Power rating: 40 kVA Input: 3-phase, 45–66 Hz, 3x400 V, 66 A Output: 3-phase, 50 Hz, 3x400 V, 58 A Power factor: cos φ 0.8 Djdpfxjxd Axbj Albowb Short-time withstand current: 10 kA (1s) Year: 2016

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! Dwsdpfxjzxxmke Albob The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.