Used Thyssen Phoenix K 90 S for sale (85,079)

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Iedpfx Aaox I T Tgo Eoid Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 1,459 h, load capacity: 2,500 kg, lifting height: 3,690 mm, free lift: 1,725 mm, fuel type: electric, mast type: duplex, construction height: 2,475 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Refurbished, no warranty Technical condition: very good Iiedpfjy S Ha Uox Aa Eed Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: Brand new Rear tire condition: New Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: 90% remaining capacity Battery type: PzS Battery year of manufacture: 2020 Battery condition: 80 - 100% Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, safety light, rotating beacon.

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 648, functionality: fully functional, operating hours: 347 h, power: 6.8 kW (9.25 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, total length: 4,000 mm, overall weight: 600 kg, For sale is a well-maintained Lange B90KF edgebanding machine. The machine is fully operational and remains connected for testing. Includes extensive accessories and basic materials. Equipment and technical data: - Glue pot - Pressure zone - Pre-milling unit Ijdpjyuvk Hsfx Aa Ejid - Edge feed - Saw unit - Milling unit - Scraper blades Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0 / 5.0 mm Electrical connection: 400V, 50 Hz, 3-phase Total power: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Weight: approx. 600 kg A video of a recently produced demo workpiece can be sent via WhatsApp on request. All information without guarantee. Price is net plus VAT. An invoice for the machine will be issued.

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Original PAUL saw bushings with effective clamping lengths of 55 mm and 110 mm for the KME 2 and BM Original PAUL spacer rings in various widths for S 900 re-cutting saw, outside-Ø 150 mm, bore-Ø 110 mm, with 2 keyways Ijdpfx Aeiimz Aea Eoid

Condition: refurbished (used), Year of construction: 2019, operating hours: 7,701 h, load capacity: 1,600 kg, lifting height: 4,800 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, battery voltage: 48 V, fork length: 1,200 mm, empty load weight: 2,442 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are technically refurbished in accordance with FEM-4.004 and the latest safety standards – for maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ? Made in Germany – with responsibility and precision ? Strict technical inspections ? 400+ units available ? Worldwide shipping & customs clearance ? Service & spare parts at fair prices ? Personal support – even after purchase Iiedpjy Rq Sxjfx Aa Ejd Test on-site and get expert advice – we will find the right solution for you. Industrial Truck Specifications: Manufacturer: Jungheinrich Model: Counterbalance Forklift EFG 216k Drive type: Electric Load capacity: 1,600 kg Year of manufacture: 2019 Operating hours: 7,701 Lift height: 4,800 mm Mast type: Triplex Free lift: Yes Overall height: 2,165 mm Fork length: 1,200 mm Unladen weight: 2,442 kg Load center: 500 mm Tyres: Solid rubber Model version: EFG 216k Battery type: PzS Voltage: 48 V Battery weight: 891 kg Cab equipment: Solopilot control lever Lighting: 2x front work lights Lighting: 2x rear work lights Attachment: Sideshift Attachment: Additional hydraulic circuit – extended to fork carriage

Condition: refurbished (used), Year of construction: 2013, operating hours: 3,562 h, load capacity: 1,700 kg, lifting height: 4,800 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, battery voltage: 48 V, fork length: 1,200 mm, empty load weight: 2,749 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are reconditioned in accordance with FEM-4.004 and the latest safety regulations, ensuring maximum quality and safety. From frame to battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ✅ Made in Germany – with responsibility and precision ✅ Strict technical inspection ✅ 400+ vehicles available ✅ Worldwide shipping & customs processing ✅ Service & spare parts at fair prices Iisdjy Rqy Nopfx Aa Esd ✅ Personal support – even after purchase Test onsite and get professional advice – we’ll find the right solution for you. Industrial Truck Specifications: - Manufacturer: Jungheinrich - Model: Counterbalance Forklift EFG 218k - Drive type: Electric - Capacity: 1,700 kg - Year of manufacture: 2013 - Operating hours: 3,562 - Lift height: 4,800 mm - Mast type: Triplex - Free lift: Yes - Overall height: 2,100 mm - Fork length: 1,200 mm - Unladen weight: 2,749 kg - Load center: 500 mm - Tyres: Solid rubber - Model designation: EFG 218k - Battery type: PzS - Voltage: 48 V - Battery weight: 870 kg Cab features: Solopilot control lever Lighting: 2x front work lights Lighting: 1x rear work light Attachment: Sideshift Attachment: Additional hydraulic circuit routed to fork carriage

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Ijdeh Eyd Aopfx Aa Eeid Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list online on our homepage.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack Iiodpfx Aaogbffve Esd 1x Melt-Pump with motor 22 kW 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, > find our most-recent stock-list online on our homepage.

Condition: good (used), Year of construction: 2004, Used small press brake by Safan Iiodpfx Ajy Atwzoa Ejd Type: H Brake 90 1600 TS1 Capacity: 1600 x 90 tons TS1 CNC control Year of manufacture: 2004 Y1, Y2, X and R axes CNC controlled Wila New Standard top clamping Wila 13 mm lower clamping (hydraulic clamping) Light curtain

Condition: used, Year of construction: 1995, Bauer scrap metal container BSK 90 Load capacity: 2000 kg Capacity: 0.9 m³ Separate coolant tank located underneath with drain Galvanized Isdpfx Aoibwyqoa Ejid

Condition: used, Year of construction: 2020, operating hours: 4,200 h, clamping force: 90 kN, displacement volume: 113 cm³, injection pressure: 2,400 bar, overall weight: 7,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Iodpfev S H N Rsx Aa Eoid

Condition: new, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, loading space length: 73,000 mm, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (Tel. No. ...). S-Way AD190S40/P 4x2 box body with tail lift. EURO VI E emission standard, speed limiter set to 90 km/h, cab rear wall without window, plastic bumper, cab fittings in black, AD MY LOW ROOF CAB, standard cab roof insulation, flat white roof, electronic immobilizer and second vehicle key, rear wall storage compartment with two sections, dashboard design: plastic with black inlays, 10-inch instrument cluster, digital tachograph 4.1, air suspension on rear axle, generator 2160W (24V x 90A), recommended for tail lift operation, rear shock absorbers, vertical dry air filter, moderate climate execution, standard specification, air compressor 1-cylinder 352cc, chassis frame in grey, standard complete tractor-trailer brake, steel air tanks (number depends on suspension and trailer version), front axle stabilizer, exhaust pipe to the left, batteries 180 Ah (Heavy) / 170 Ah (Eurocargo, recommended for tail lift and/or PTO use), standard chassis component positioning, standard ride height, rear frame overhang: 2208mm, fuel tank 290L aluminum, AdBlue tank 50L, ECO NORMAL MODE, standard gearbox mode, 4G Connectivity Box incl. TCO service contract, RADIO with Bluetooth, DAB+, 7-inch display, tire pressure monitoring system (TPMS) with internal sensors, 4 DIN slots storage above, gearbox software ECO-Roll (coasting function), standard engine configuration Cursor 9, adaptive cruise control (ACC), lane departure warning system (LDWS), driver drowsiness attention warning, hill start assist (Hill Holder) for improved start-up on inclines, electronic stability program (ESP), reverse monitoring system with camera, blind spot monitoring system (BSIS) on the right, intelligent speed assistant (ISA), NO HIGH WAY ASSIST, moving off information system (MOIS), advanced emergency braking system (AEBS), pneumatic parking brake, wiring for breathalyzer immobilizer (ALC), CAMBIO 12TX 1850 TD, tires: 315/70R22.5, mechanical roof hatch, first aid kit, fog lights with cornering/turning function, air suspension for driver cab, exterior mirrors electrically adjustable and heated, LED headlights at the front, black decorative foil on doors, transparent sun visor mounted externally above cab, leather steering wheel, sun blind for driver's side window, pneumatic horn behind bumper, fully automatic air conditioning, HI-Comfort driver's seat: multi-adjustable, air-suspended, integrated headrest and height-adjustable seatbelt, lumbar support, 3-step heating/cooling, luxury co-driver seat: 4-way adjustable, air-suspended, integrated headrest and seatbelt, heated, lumbar support, reinforced parabolic spring on front axle, electrical pre-installation for tail lift according to VEHH standard, front axle weight variant: 8,000 kg / rear axle: 11,500 kg (technically possible: 13,000 kg), heavy-duty anti-roll bar rear axle D 60mm, two wheel chocks, cab-mounted battery master switch, battery charging socket, terminal clamps, rear axle ratio: i = 3.08, 24V trailer socket, 15-pin, ... Iodoyfvyijpfx Aa Esid

Condition: used, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, loading space length: 73,100 mm, loading space width: 25,000 mm, loading space height: 26,330 mm, Year of construction: 2026, Equipment: ABS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel is available to assist you (by phone at...). CO S-WAY AT190S40/P 4x2 box truck with tail lift Engine speed: 2200 rpm, standard oil dipstick and oil filler neck on the transmission, engine type plate, steel rims, standard reverse gears, speed limiter 90 km/h, manually operated cab tilting mechanism, front halogen headlights, black decorative film on doors, cab rear wall without window, fog lights, front underrun protection for chassis with a gross weight over 7,490 kg, first aid kit, plastic bumper, cab attachments in black, non-heated windshield, electrically adjustable and heated exterior mirrors, standard cab roof insulation, white flat roof, electronic immobilizer and 2nd vehicle key, digital EU tachograph 4.1, static passenger seat, air suspension on rear axle, Hi-TroniX 12TX 1810 TD, COC-type approval, 2 wheel chocks, batteries mounted horizontally on frame, standard labels for air tank, generator 2160 watts (24 Volt x 90 Amp), recommended for tail lift operation, rear shock absorbers, vertical dry air filter, moderate climate version, standard version, air compressor 1-cylinder, 352 cc, chassis frame in grey, digital VIN code, APU air release to atmosphere, standard full-train brake, steel air tanks - number depends on suspension and trailer version, standard applications, front axle stabilizer, exhaust end pipe to the left, VIN: manufacturer index ZCF, emission standard EURO VI E, rear frame overhang 2,793 mm, rear underrun protection omitted, AdBlue tank 50 liters, heated fuel pre-filter with separator, standard transmission mode, optimized aerodynamics at A-pillar, toll system (OBU) pre-installation including antenna and dashboard wiring, ECO-Switch (switch from Power to Eco mode to optimize Total Cost of Ownership (TCO) by fuel-optimized engine and transmission tuning), VDI interface (Vehicle Data Interface) for telematics services (FMS) version 4.0, transmission software ECO-Roll (freewheeling function), driving style analysis (DSE), adaptive cruise control (ACC), lane departure warning system (LDWS), warning triangle as per ECE-27 directive (design and dimensions), warning beacon, electronic stability program (ESP), advanced emergency braking system (AEBS), load compartment dimensions: L 7,310 mm x W 2,500 mm x H 2,633 mm. We can provide you with a tailored leasing or financing offer upon request. Mr. Seidel (Tel...) will be pleased to assist you further. For more information, please visit our homepage. Isdoyfvtvjpfx Aa Esid ...Errors, amendments, and prior sale excepted! Navigation system, particulate filter = Further information = Engine displacement: 9,000 cc Gross vehicle weight: 18,000 kg Please contact Tobias Ebert for further information.

Year of construction: 2024, condition: new, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 22 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* ✔ Filling opening: 2031 x 1565 mm Iodpfoiq Uz Hsx Aa Esid ✔ Dimensions L/W/H: 3,21/1,97/2,04 m ✔ Weight: 2450 kg 2 years warranty or 2000 working hours

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 3 Edges thickness in stips / lippings max mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 270 / mm 1300 Numerical Control /Software ICOS open Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt SIZING PART (for each side): Pre-milling Unit (vertical joint trimmers) 75.30 (Kw 6,6 x 1) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1569 + 283.205 Pressing roller (revolver) both for straight and shaped edges (softforming) mm 1.050 Iodefi Tkgjpfx Aa Eeid Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Rough Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Fine Trimming unit 08.0582 (Kw 0,66 x 2) 0°-30° Glue scraping unit 08.50 Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, screw diameter: 25 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520S 1600 290/70 2-component 12.3 million cycles 86,565 hours manual operation 78,099 hours automatic operation Injection unit 1 horizontal 290, diameter 25, max. 71 cm³ Injection unit 2 vertical 70, diameter 18, max. 21 cm³ Opening stroke 925 mm Electric index rotation 12-zone hot runner integrated 3x core pull 2x air blow (control for needle shut-off) Various customer inputs and outputs Interfaces: ALS Temperature control units Dryers Multilift H 6kg: 2x vacuum 5x double-acting grippers Z-axis servo 800mm C, G, X, and B-axes pneumatic Various customer inputs and outputs (gripper monitoring, etc.) Important Notice!!! Current update – Tax note and benefit for used machinery From 01.07.2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Iedpfx Aasxzix Ae Esid Keyword: Growth Booster (§ 7 Section 2 EStG-E)

Condition: excellent (used), Year of construction: 2009, operating hours: 78,100 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-Component 78,099 hours, automatic Injection Unit 1: horizontal, 290mm, diameter 25mm, max. 71 cm³ Injection Unit 2: vertical, 70mm, diameter 18mm, max. 21 cm³ Opening stroke: 925 mm Electric table indexing 12-zone integrated hot runner 3x core pulls 2x air blow (control for needle shut-off) Various customer-specific inputs and outputs Interfaces: - ALS Iedpfx Aox A Dy Rja Eoid - Temperature control units - Dryers Multilift H 6kg: - 2x vacuum - 5x double-acting grip - Z-axis servo 800mm - C, G, X, and B axis pneumatic - Various customer-specific inputs and outputs (gripper monitoring, etc.) At Maschinen-Handel, we offer a commissioning guarantee for every machine purchased from us, meaning the machine will be started up by the manufacturer. This offers you, as a customer, maximum security on the used machinery market. Important Note!!! Current legal update – Tax advantage for used machinery Effective from 01.07.2025, used machines can also be subject to an annual special depreciation of 30%. In addition to the lower price compared to a new machine, you can benefit from the same depreciation allowances as with a new machine. Keyword: growth booster (§ 7 Paragraph 2 EStG-E)

Condition: good (used), mileage: 313,000 km, power: 243 kW (330.39 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 255 l, color: yellow, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, number of seats: 2, total length: 9,830 mm, total width: 2,550 mm, total height: 3,870 mm, loading space length: 7,600 mm, loading space width: 2,490 mm, loading space height: 2,590 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, full service history, onboard computer, power mirror, soot filter, spoiler, tail-lift, = Additional Options and Accessories = - 12-volt power outlet - Aluminum fuel tank - Armrest - Car kit - Remote central locking - Low noise - Speed limiter - Air suspension - Air horn - Spare wheel - Reversing camera - Toolbox - Wind protection = Further Information = General Information Number of doors: 2 Technical Information Number of cylinders: 6 Engine displacement: 8,710 cc Transmission: ZF, 12 gears, automatic Axle brand: Anders Front axle: Steered Maximum speed: 90 km/h Weights Unladen weight: 10,113 kg Payload: 9,387 kg Gross vehicle weight: 19,500 kg Functional Tail lift: dHollandia, rear tailgate, 2,000 kg Body manufacturer: Jos Mulder Carrosserie Interior Interior: black Maintenance APK (Technical Inspection): New MOT on delivery History Booklets: Available (dealer serviced) Condition Technical condition: good Optical condition: good Number of keys: 2 (2 remote controls) Isdpfxjxlr Sgs Aa Eeid Product Safety Manufacturer: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4 4286LG ALMKERK, NL

Condition: excellent (used), Year of construction: 1997, Manufacturer: Brüninghaus Verpackungssysteme GmbH & Co. KG Year of manufacture: 1997 Machine serial number: 1390542 Model: SKL-90 Iijdpfx Aoyubh Dea Eod

Condition: used, Filler, manufacturer: KHS / H+K, type: Delta VVF 90/16, rated output up to 38,000 bph, operated at 24,000 bph, with 90 filling valves, with double pre-evacuation, vacuum pump, high-pressure injection, motorized height adjustment, with CIP caps, residual liquid control before filler infeed, with 16-head crowner including crown cap feeder, running direction: left to right, year of manufacture: 1982, retrofitted with new S7 control system in 2004. Ijdpfsyzhqtex Aa Ejid

Condition: used, Bottle filler for mineral water, manufacturer KHS / SEN, model: VVF-90-KK16-SV16, equipped with 90 filling valves, 16-head crown corker, and 16-head screw capper, capacity: 35,000 bottles/h, for 0.7 l GDB / 0.25 – 0.75 l Gastro / + 0.5 l NRW bottles. Iodpfxsyzhico Aa Eoid

Condition: new, Year of construction: 2026, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Isdpekqz H Dofx Aa Esid

Condition: new, * IMMEDIATELY AVAILABLE * Including mesh extension and lashing rings. Technical data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATELY! • Permissible total weight: 2,000 kg • Unladen weight: approx. 350 kg • Payload: approx. 1,650 kg • Internal dimensions: 255 x 145 x 39+53 cm (L x W x H) • Overall external dimensions: 395 x 192 x 92 cm (L x W x H) • Loading height: approx. 52 cm • Tyres: 13 inch steel rim • Brakes: yes • Jockey wheel: yes • 100 km/h approval: available at extra cost • Including vehicle documents Vehicle specification: • Floor: Plywood, phenolic resin coated, 15mm • Side panels: Steel • Side panel height: 39 cm • Chassis: Low loader, rubber suspension axle • Foldable side panels: rear • Hydraulics: no • Overrun device & brake: Knott • Frame/chassis: V-shaped drawbar • Extension: Mesh extension included in price • Latches: Lever latch • Lashing eyes: 6, recessed in the floor • Support legs: available at extra cost • Lighting plug: 13-pin • Registration: ZBII & COC documents Standard features: • Galvanized steel sheet side panels • Rear side panel foldable • Wooden floor Iedpfx Aasyyw Rtj Eeid • Corner posts with insert option for extensions or mesh sides • Maintenance-free rubber suspension axles • Axle with continuous axle body and independent wheel suspension • 6 internal, floor-recessed lashing rings • Lever latch • Removable mesh extension • Tarp buttons for cargo net or flat cover • Knott overrun brake • Automatic reverse system • Robust V-drawbar • 13-pin connector • Reversing light • Large-size safety lighting • Integrated rear fog light • Lighting recessed in rear frame • Registration documents: Registration certificate (ZBII) & COC papers Options & accessories (retrofittable – please enquire): • Slotted rail on side panel • High front mesh • High tarpaulin • Side panel extension • Spare wheel • Toolbox • Rear support legs • Ramps • Flat cover • Additional lashing points • Slotted-rail tie-down system for straps & load bars • Rubber-coated slat rail for straps & bars • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery available - Advance dispatch of registration documents or provision of temporary (transfer) plates within Germany possible - Export license plate and customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! For over 30 years we have been specialist dealers and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Errors, omission, and prior sale reserved -

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, Equipment: CE marking, type plate available, Heidelberg Diana 90 AUTOSET – Refurbished Folder Gluer / Folding Carton Gluing Machine ✅ Condition: Fully refurbished in 2024 (complete mechanical and electrical overhaul, new motors, shafts, rollers, and control electronics) ✅ Functions: Straight-line, crash-lock bottom, 4-corner box gluing ✅ Speed: up to 500 m/min ✅ Formats: Diana 45 → 48–570 mm | Diana 90 → 48–900 mm ✅ Automation: Motorized carriers, AUTOSET feature, touchscreen operation ⚙️ Advanced Features - Precision aligning module for perfect folding - Feeder and transfer sections equipped with independent drive motors - Pneumatically lifted feeder top for easy access - LPS Clamping System for rapid module setup - Glue system with LPS GP AUTO (maintains glue freshness during stops) - Drive system: IE3 motors, ABB frequency inverters, Siemens PLC control - Final fold station design inspired by Bobst Alpina 🚀 Why choose LPS Diana? ✔️ High efficiency – quick job changeovers with Autoset ✔️ Versatile – accommodates a wide range of carton types ✔️ Premium build – robust frame for stability and vibration-free operation ✔️ Remote diagnostics and service capability 🏭 Additional Machines Available from Stock We are a company specializing in full mechanical and electrical refurbishment of folder gluers (Heidelberg Diana, Bobst Alpina). We deliver machines with new modules, including our proprietary semi pick-up delivery table system. Currently available refurbished folder gluers, nearly ready for delivery: - Diana 90 Crashlock 4/6 Corner – €120,000 - Diana 90 – €100,000 - Diana 45 – €100,000 👉 All machines are fully rebuilt and include: - New shafts and bearings - New electrical cabinets with ABB and Siemens components Iijdpfxjvy Efye Aa Eod - Comprehensive mechanical and electrical overhaul Prices are negotiable depending on configuration and customer requirements.

Condition: used, Automatic packing machine Manufacturer: MAIR Model: .90.D.6.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE_M_TS-31J-WILT_4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 4 - 12 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/6/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles Iiedpfx Aaoyma Ado Ejd - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 4 – 12 m Square bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 2 Tn