Used Tdm Component for sale (8,137)

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15, total width: 2,210 mm, total length: 2,333 mm, total height: 2,200 mm, overall weight: 700 kg, type of input current: three-phase, input voltage: 400 V, The DCSF-135 2W brush sanding machine features a welded frame, housing two independently moving frames. Each frame supports two sanding spindles, constructed from cylindrical base segments with grooves for inserting brushes made of soft abrasive cloth and agave fibers. These spindles can swivel up to 15°. The spindles are driven by electric motors via gear elements. The sanding rollers are belt-driven, with their rotational speed regulated by frequency inverters. The sanding units are suspended in pairs on independent lifting systems. The lifting system consists of four trapezoidal screws, driven by a geared motor via a chain drive. Each spindle is equipped with a separate dust extraction unit that effectively captures dust generated during sanding. A conveyor table with a rubber belt is mounted on four supports below the sanding spindles, and includes a feed mechanism. The conveyor table is a vacuum table. The vacuum chamber of the table is connected to a radial fan located underneath the table via two flexible hoses. At the rear of the machine, a turbo blower is located to clean the workpiece after the sanding process. All electrical components are installed in a separate control cabinet at the front of the machine, with the operator panel located on the left-hand door. The DCSF135 2W wide-belt sanding machine can be adapted for use in a production line. Machines designed for this purpose are equipped with operator panels angled towards the conveyor belt feed direction, allowing operation during continuous processing or when the table is long from the infeed side. The rubber rollers on the table, located near the geared motor, are driven by elastomer belts. When the machine operates in a 1+1 line (two machines in series), it can be equipped with an infeed/outfeed conveyor with its own drive (MRT 50 geared motor, i=15, n=93 with an 800 mm conveyor length*). Power is transmitted from the geared motor to the rubber rollers via round elastomer belts. The length of the infeed/outfeed conveyor depends on the customer's individual needs. Technical parameters: Sanding roller with brush strips made of agave fiber (FLEX TIM) Ø290-380 x 1400 - 2 pcs Brush rotational speed 100-450 rpm Roller drive motor Sg90L-4PC 2.2 kW, 1380 rpm - 2 pcs Sanding width 1350 mm Conveyor belt CANTACT E2112 Kreisloch 57oSh;, 1350x4424, VACUUM CONTITECH (according to SSZ.00.01-135) Feed rate 3-20 m/min Conveyor drive motor Skg100L-4A 3 kW, 1415 rpm Conveyor gearbox MRT-85 i=20 n-70 Geared motor (infeed/outfeed conveyor)* MRT-50 i=15 n=93, power 0.75 kW* Lifting drive motor Skg100L-4A 0.55kW, 1390 rpm - 2 pcs Lifting gearbox MRT-60 i=56 n=25 Fan motor SKg 132S2A 5.5 kW n= 2925 rpm Diameter of dust extraction ducts for sanding units 1 x Ø250mm Diameter of dust extraction duct for turbo blower x Ø120mm Laodpfxez Duice Abzog Air requirement for brushes 2x 4000 m³/h Air requirement for turbo blower 500 m³/h Supply voltage 3 x 400 V in TN-S system Installed power (without infeed/outfeed conveyor) - 13.45 kW

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 025, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, table width: 600 mm, table length: 800 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, operating hours of spindle: 9 h, spindle nose: HSK 50E, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, For sale is a used high-speed machining center from the manufacturer MIKRON. High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in toolmaking, graphite and electrode machining, as well as for flexible series production. Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliability and thermal stability. Ledez Dx Shspfx Abzeag At “Der Spindel Doctor”, a Step-Tec spindle (a key component of the machining center) was professionally overhauled (report and invoice included) and put back into operation after balancing and inspection. The machine will be completely set up and tested according to the Mikron protocol. During the machine inspection, many wear parts were replaced: X-axis encoder and scale, pneumatic cylinders on the tool changer, tool holders, pneumatic maintenance unit, pneumatic hoses, MMS hoses, water hoses, etc. The machine is energized and can be inspected and tested. By arrangement, the machine can be put into operation at your location. Accessories: 4-position pallet changer II Table chuck Preparation for PS 32.00 measuring probe Mobile handwheel Blum laser tool measurement system Spindle cooling unit Minimum quantity lubrication - Unilub Oil mist extraction Optical operating mode indicator Air nozzle on the spindle slide Chip conveyor (including coolant tank) General overhaul of the spindle

Condition: ready for operation (used), Siemens SINUMERIK 840D/DE NCU 572.2 6FC5357-0BB21-0AE0 SN: ST-M82029648, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos Lsdpfx Aez Acrlsbzoag

Condition: ready for operation (used), Heidenhain BF 155M flat screen ID: 368 155-02 SN: 15117754A, used, in good condition, 100% functional, scope of delivery as per photos. Lasdpfx Abezzur Ijzsg

Condition: ready for operation (used), Unipo 2TT0901CAN02A UFP 10.4" S TFT monitor, SN: 86351, used, in good condition, 100% functional, scope of delivery as per photos. Laodoz Adfgspfx Abzsg

Condition: ready for operation (used), Rexroth -EN2-L2-S-NN-FW control board R911329920, serial number 7260402207736, used, in good condition, 100% functional, scope of delivery as shown in the photos. Laodpfjz Aadljx Abzsg

Condition: ready for operation (used), Willy Vogel RP-68.31 lubrication pump, used, in good condition, 100% fully functional, delivery as per photos. Lajdez Adnhspfx Abzjg

Condition: ready for operation (used), SKF T-1099796-1/14 spindle SN:14, dimensions see test report, spindle has been overhauled by the manufacturer, used, normal signs of wear, 100% functional, scope of delivery as per photos Laedpfx Absz Aczgszjg

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: FLA52084COGAG5E0, Tapered die set for LAMEC 520/182 press / die set - Ø6.0 x 65 / 40 Lodpfx Abszxz U Rjzoag

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Lsdpfoz Az Uvsx Abzeag Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Condition: ready for operation (used), Siemens SINUMERIK 548 025.9015.04 System 3 operator panel with control unit SN: A1452596, used, in good condition, 100% functional, scope of delivery as per photos. Laedez Acq Ispfx Abzsg

Condition: ready for operation (used), Trumpf Kontron CP671 TASC-MFB / 31.193-1010.1/B02 board SN: 152734123, used, in good condition, 100% functional, scope of delivery as per photos. Lodsz Adcfspfx Abzsag

Condition: ready for operation (used), TDE DSCT 15N / BO 98 / 0155 servo drive, serial number M2386, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lodpfx Asz Ac Srsbzjag

Condition: ready for operation (used), Wagner 752-ST/1 polarity reversing unit / control unit 340659, serial number: 529597, used, in good condition, 100% functional, scope of delivery as shown in the photos. Laedpfxsz Adh Is Abzsg

Condition: ready for operation (used), Trumpf test module for direct current, used, in good condition, 100% functional, scope of delivery as shown in the photos. Laedpfxsz Adcxe Abzjg

Condition: excellent (used), Year of construction: 2005, operating hours: 4,108 h, functionality: fully functional, machine/vehicle number: 591343, clamping force: 1,550 kN, An injection molding machine of the Ferromatik brand and type K-TEC 155 S / 2F is for sale. The machine is in very good condition. Please note the low operating hours of only 4,108 h Technical data: Year of construction: 2005 Clamping force: 1,550 kN Clear column distance (H. x V.): 500*500 [560*560] mm Mold opening stroke: 650 mm Platen distance max.: 950 [1150] mm Tool installation height: 300 [500] mm Opening force: 86 kN Screw diameter 1: 50 mm Screw diameter 2: 40 mm Injection pressure max.: 1568 bar Max. stroke volume: 314 cm³ Electrical connection: 40 kW Machine dimensions (L x W x H): 5,500 x 1,700 x 2,400 mm Weight: 7,800 kg Oil tank capacity: 480 l On request, loading onto trucks and transport throughout Europe can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Lasdpfot Tdptex Abzsg Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a window manufacturing system, UC Matic 15, from Weinig, consisting of the following main components: - Infeed mechanism - CNC machining center Unirex 2000 - CNC end machining system Unitec 15 - CNC length profiling machine Unicontrol 12 - Automatic double-part turning and return system - Outfeed buffer Laodpfx Absx Sqxhezeg The system is designed as a continuous manufacturing system for window and profile processing and enables efficient and flexible production. The machines will be disassembled by a specialized company. The costs for this will be disclosed and are to be borne by the buyer.

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI History from the previous owner is available We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. Ledjzhwvpjpfx Abzsag You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring Ljdpfx Aozabnzjbzoag - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: ready for operation (used), Tool turret 5603923WZ with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire for charges for packing and transport separately! Lajdpfx Abez Adlyszeg

Condition: ready for operation (used), Siemens SINUMERIK 810 TFT Monitor LCD84-0019b, serial number S7999, used, in good condition, fully functional, delivery as shown in photos. Laedpsz Acr Ejfx Abzsg

Condition: ready for operation (used), Tool turret 5603923WZ SN:1286 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for packing and shipping costs separately! Laodpfx Ajz Adl Tsbzog

Condition: ready for operation (used), Siemens Teleperm M 6DS1142-8AA interface module E-Stand 02 SN C2 096369, used, normal signs of use, 100% functional, scope of delivery as per photos Ljdpfx Ajz Acvwebzsag

Condition: ready for operation (used), Tool turret 5603923WZ SN:1285 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Ljdoz Adl Hopfx Abzeag

Condition: ready for operation (used), Heidenhain BC 120 monitor unit 15" TFT SN: 30938147 consisting of Heidenhain 329 506-01 additional keyboard and Viscotech SEM15-F-BC120-FP industrial monitor for TNC426, TNC430 / BC120, BC120F, used, in good condition, 100% functional, scope of delivery as per photos. Lajdpezyxmmefx Abzog