Used Tape Sealer for sale (768)

Condition: used, Year of construction: 2001, 150 kg weight ca. 70 kg dimensions ca. 940 x 500 x 800 mm SEMI-AUTOMATIC Continuously adjustable strap tension: 5–500 N Up to 15 strapping cycles per minute Strapping triggered automatically when the strap is inserted or via foot pedal Heat-sealed closure Load capacity: 150 kg Minimum product dimensions (W x H): 45 × 20 mm Height-adjustable · Ergonomic operation Clear control panel, · Easy operation from both sides No protruding controls · Strap tension adjustable via the keypad Finely adjustable strap tension from 5–500 N Strap widths 6, 9, 12 mm · Versatile application Easy access · Tape spool can be replaced quickly and easily Tedpfx Ajy Ihbfecnob The drive motor runs only during the strapping process · Energy-saving

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013325, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 11/2023, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, The images shown are archive images. The vehicle may still be in use. Chassis: Central axle trailer, low-bed Fine-grained steel welded construction Gearbox support leg at the front Telescopic rear support Chocks with holder Mudguards made of steel sheet over both wheels Side impact protection, aluminum Coupling device for central axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles of our choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker arm compensation) Wheels and Tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin connector at the front, with connecting cable Bridge TTS Low-lying steel pan, bridge floor made of steel/non-slip steel plate, steel walls solidly welded to the floor Bridge length 5500 mm Pan at the front and side with "Load-Lock profile" for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight undulation of the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel pan and 1 x at the rear in the floor, each 5 tons Additional pair of lashing eyes in the floor, each 5 tons Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handrail on the ramps covered with wood (tip area with steel/non-slip steel plate) with gas spring for single-person operation Operating instructions The specified total weight is technically possible, depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor handling and tracking behavior possible due to incorrect load distribution) Country of Registration/Signage Country of Registration: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Tjdpfx Aezadb Decneb Painting Frame: RAL 5002 Ultramarine Blue Ramps: Hot-dip galvanized The images shown are archive images. The vehicle may still be in use.

Condition: new, maximum load weight: 96,500 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, loading space length: 26,900 mm, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck. Length approx. 3,650 mm * For semi-trailer with multiple axles (SZMs): 6 x 4 or 8 x 4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for suspending the supply lines, the SZM tank must have a minimum capacity of 80 l * With MAX Trailer coupling parts, otherwise coupling parts must be supplied by the customer * Gantry with winch for spare wheel on the front of the gooseneck * 3.5-inch kingpin * Steel front panel approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * Control levers on the gooseneck protected by a folding cover * Lighting for the controls on the gooseneck with on/off switch * A 7-pin socket on the left and right at the rear of the gooseneck for the warning sign * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * Hydraulic connections from the gooseneck to the low-bed with screw couplings * Access to the gooseneck * Four warning signs that can be extended by approx. 1,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting bracket for a rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Power: 9.5 kW (12.9 hp) at 3000 rpm * Hydraulic connection lines between the power pack and the connector plate on the gooseneck Tjdpfxezahp Se Acneb * 1 LED work light on the left and right at the rear of the gooseneck with separate on/off switch * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of the trailing axle steering, in addition to the cable remote control, with 2 LED indicator lights on the receiver as a single-axle control. - Operation of raising/lowering the gooseneck - Operation of raising/lowering the suspension of the chassis 2-axle front bogie: * Bolt-on coupling at the front and rear. Length: approx. 2,970 mm. Chassis width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle chassis with standard grease NLGI-2. (not connected to the track rods) * A 7-pin socket on the left and right at the rear of the front bogie for the warning signs * Surface of the chassis with a sand-blasted coating for slip resistance * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * A 7-pin socket for the warning signs, on the left and right on the front chassis, in the area of the axles * Extendable widening elements by approx. 230 mm on each side for a 2-axle chassis * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for the warning signs for insertion into the pocket recesses in the outer frame of the loading platform Loading platform: * 6-axle double-extendable loading platform with bolt-on coupling at the front and a slope of approx. 500 mm x 8° at the rear * Loading platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Basic width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Surface of the loading platform with a sand-blasted coati

Condition: used, Year of construction: 2014, For sale is a semi-automatic packaging line from MINIPACK-TORRE, consisting of a Modular 70 Digit L-sealer and a Tunnel 70 DG shrink tunnel. The equipment is used but in good condition. Both machines operate as a single set and are designed for professional packaging of products in heat-shrink film. Ideal for industrial enterprises, logistics centers, warehouses, and packaging of electronics, metal, wood, food, and other products. The set includes: 1. L-sealer Manufacturer: Minipack-Torre (Italy) Model: Modular 70 Digit Year of manufacture: 2014 Voltage: 380 V Frequency: 50 Hz Power: 2.3 kW Features: Tsdpfx Aszg Ezdjcneb Semi-automatic operation L-shaped (corner) sealing and cutting of the film Digital control panel Simple parameter adjustment 2. Shrink tunnel Manufacturer: Minipack-Torre (Italy) Model: Tunnel 70 DG Year of manufacture: 2014 Voltage: 380 V Frequency: 50–60 Hz Power: 13.5 kW Features: Hot air circulation Uniform film shrinkage Adjustable conveyor speed Adjustable tunnel temperature Applications Perfect for packaging various products in shrink film: metal products; electronics; wood products; boxes; spare parts; food products; industrial products. Reliable Italian equipment that ensures fast, aesthetically pleasing, and professional packaging. If you have any further questions, we will be happy to answer them.

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, Equipment: ABS, More vehicles can be found at [website address]. Excerpt from the equipment list. Complete equipment list available upon request. Loading area: Loading area with approximately 30 mm thick hardwood flooring. 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). Tires: 385/65 R 22.5. TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Tjdpfx Aezhd Niocneb Axles and suspension: BPW axles, technically rated at 10,000 kg each. 1st and 3rd axles are hydro-mechanically forced-steered and mounted on a turntable. 2nd axle is fixed. Air-suspended with lifting and lowering valve. Axle spanner. Braking system: Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Steel structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Painting: Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red according to the RAL 841GL system. Rear part is metallic and painted in RAL 9010 (pure white). Rims in silver. Coating tested in a salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Accessories: Loading area with approximately 30 mm thick hardwood flooring. 2-inch kingpin. One galvanized steel front panel (EN12642-XL), approximately 1,200 mm high. Yellow-red air couplings on the galvanized front connection bar. 4 pieces of wheel chocks with holders on the front panel. Storage for approximately 1,000 mm lashing bars in the rear central beam. On the gooseneck and rear panel, one holder each on the left and right sides for warning signs including a socket. Yellow reflector tape according to EU regulations on the side and rear of the trailer. 10 pairs of lashing bar pockets for lashing bars approximately 100 x 50 mm in the outer frame of the loading area. European reflector signs (red-yellow) on the rear of the trailer. One holder for a rotating beacon on the rear of the trailer. One mud flap on the rear of the trailer. Manual and description on a USB stick. Speed stickers 80 km/h on the rear and both sides. Electro-hydraulic unit. 1 maneuvering coupling with reinforcement bolted to the end cross member. Load manometer for determining the axle loads including a load diagram. Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and a removable guard around the pump. Follow-up steering from the front and rear using a cable remote control via push buttons, with single-axle steering control (without installation in the tractor unit). 7 pairs of galvanized lashing bars approximately 100 x 50 mm, approximately 1,000 mm high. 4 pairs of lashing bar strip rails, mounted transversely in the loading area, for las

Condition: as good as new (ex-display), functionality: fully functional, For sale: a very nice semi-automatic thermal binding machine. Brand: Planax, type: Copybinder 5. Capacity: from 5 to 330 sheets, linen tapes, 200 books per hour. Voltage: 220/240 volts, made in Germany. Counter reading: only 43755. Includes a large number of strips. You are welcome to test the machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please request a price including transport (within the Netherlands). Todpfx Aeywic Ascnjb Regards, Henk Hoos.

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS open (windows XP) Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Todpsyypi Uefx Acnob Hogging Units (2 x Kw 8) EDGE-BANDING PART (for each side): Glueing Unit (EVA-Hot Melt + Quick Melt Unit) 04.1570 + 283.205 Edge coils supporting unit (No. 6 reels) SERVO-DRIVE guillotine shear (cutting the edge/band) Pressure zone (N.C. adjustment) Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Spraying Unit (for polishing liquid) Milling grooving unit 08.190 (1 x Kw 4,5) 0°-90° / 180°-270°

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Todpfey Rxmwjx Acnjb Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Painting: Frame: RAL 3002 carmine red Landing gear: Black coated The images shown are archive photos! The vehicle may currently be in use!

Condition: good (used), Year of construction: 2014, functionality: fully functional, For sale is a used Siat L36-150 TC-CE adhesive tape printing machine, manufactured in 2014. The machine is in good condition and fully functional. This machine was operated in our facility together with a dust extraction system, which is also to be sold: Manufacturer / Model: Siat L36 150 TC CE Tjdsza Synjpfx Acnjb Year of manufacture: 2014 Condition: used, good Function: functional Application: printing adhesive tape CE marking: present Dust extraction system: FILTERBLOC CARBO-2000 ATEX (new, from 2023) We prefer to sell the machine as a complete package including the dust extraction system. The machine can be inspected by arrangement. Further technical data and photos are available upon request.

Year of construction: 2013, condition: good (used), Ref. no.: 18592 Manufacturer: SEALPAC Type: Sealpac A5 Year of construction: 2013 Further information: TECHNICAL DATA Todpfxsy Udgde Acnjb Feature Specification Manufacturer SEALPAC GmbH Model SEALPAC A5 Machine Type Tray Sealer / Schalenverschließanlage Serial Number A5-01-2661 Year of Manufacture 2013 Electrical Connection 3 x 400 / 230 V Frequency 50–60 Hz Installed Power max. 8 kW Machine Weight approx. 1,600 kg Control System Touchscreen control panel Construction Stainless steel Working Environment Cleanroom / Clean room Application Areas Medical / Food / Technical packaging SEALPAC A5 Tray Sealer Used – Excellent Condition – From Cleanroom Production Previously used for cleanroom packaging of medical and laboratory consumables, including pipette tip racks. This high-quality SEALPAC A5 tray sealing machine is designed for professional packaging applications where hygiene, reliability and process stability are essential. The machine was previously operated in a cleanroom environment, making it particularly suitable for medical, laboratory and sensitive packaging applications. Thanks to its stainless steel construction, compact design and user-friendly control system, the machine offers reliable and efficient production performance. As visible in the photos, the machine is in very clean and well-maintained condition. General Condition The machine is currently dismantled and stored. Visual condition is very clean and the machine was previously used in a professional production environment.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, total length: 3,400 mm, total height: 2,700 mm, total width: 600 mm, conveyor belt width: 450 mm, delivery head: 2,400 mm, overall weight: 800 kg, ejection height: 2,200 mm, Equipment: chip conveyor, For sale is a used, but fully functional, magnetic tape conveyor. Tsdjzgrzdjpfx Acnob The buyer is responsible for arranging the pickup. A matching chip centrifuge is also available for the conveyor (available for purchase in a separate listing). For sale at a negotiable price. Self-pickup or arrangement of transport by the customer.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: QP-25-AF, type of input current: three-phase, input voltage: 400 V, Qualipack QP-25-AF The fully automatic filling cycle begins by completely closing the bag valve and also registering the bag's weight. The next phase fills the bag, which is located on a load cell, with a rapid feed via a pneumatically operated slide gate and a screw conveyor. When the weight reaches a pre-set amount (typically around 95% of the required total), the slide gate closes to a slower feed rate until the required weight is reached, after which it closes completely. Once the screw conveyor has transferred all the product, it stops, and the valve seal is automatically released, ready for the bag to be removed. - Conveyor belts for filled bags - Sealers for filled bags - Weighing capacity: 5-50 kg - Accuracy: Within 25g - Filling rate: Up to 4 tons per hour - Filling method: 2-stage via a screw conveyor - Valve grip: Pneumatic (fully closed) - Bag support: Height-adjustable gravity rollers - Product feed: Controlled by a pneumatic gate Tedpfezgtv Aox Acnob

Condition: good (used), Year of construction: 2006, functionality: fully functional, Specifications (See Details above for installed options) *Assembleon Philips Topaz Rated CPH Optimal placement rate: 14,000 cph Simultaneous pick Nominal placement rate: 9,000 - 11,000 cph *Applicable Components: 0402 - SOP, SOJ, PLCC 25 mm (1.0") with Line Sensor Camera QFP 21 mm with pin pitch down to 0.65 mm (25 mil) Line sensor camera system QFP 32 mm (1.26") with pin pitch down to 0.5 mm (20 mil) Optional area CCD camera system *Max. component height: 6.5 mm *Philips Topaz Mounting accuracy: (x,y) 3s 0.08 mm for chips and SOIC Line sensor camera system 0.06 mm for QFPs Using Precision Head and optional Area CCD camera system *Mounting angle: 0 up to ± 180 (steps of 0.01) *Alignment system: Line sensor camera with front lighting system for Vision-on-the-Fly image processing by VICS 2500 proprietary vision system -Second Line sensor camera for rear side is optional -Area CCD camera for fine pitch components Optional -Area CCD camera for fiducial alignment Standard *Type of nozzles: Type 31 Type 31-1 (Precision Head only, spring loaded) Type 32-2 Type 33 Type 34 Type MELF -The nozzle types for Topaz and Emerald are the same. *Nozzle exchange station: 12 nozzle positions Optional (No nozzles included) *Number of heads: One single beam with 8 exchangeable nozzles Including one Precision Head *Placement heads actuation method: Pneumatic or servo controlled for component height compensation *Number of Tape Feeders: 8 mm: 100 positions 12 mm: 48 positions 16 mm: 48 positions 24 mm: 32 positions 32 mm: 32 positions 44 mm: 24 positions 56 mm: 18 positions Stick feeders: Depends on stick dimensions Bulk feeders: 100 x 8 mm positions General Specifications *Component Packaging: Tape according to IEC/EIA-J/JEDEC: 8-56 mm Tape reel diameter max: 380mm (15") *Manual Tray feeder: Max. tray size 320 mm x 320 mm (12.6" x 12.6") Optional: Manual tray feeder *Fixed Manual Tray Feeder: Max. tray size 635 mm x 136 mm (25" x 5.3") Optional: Fixed manual tray feeder (Max. board size 250 mm (10") -Optional 558 mm x 508 mm (22" x 20"). *PCB Thickness: Min. 0.6 mm (0.02") Max. 3.0 mm (0.12") *Non-mountable area: -Board Top side: 3 mm from rear side board edge (0.12") 0 mm from front side board edge 3 mm around reference holes (0.12") (for locating pins) Component height restrictions apply in the 10 mm (0.4") area from front side edge depending on board thickness -Board bottom side: 5 mm from front and rear side board edge (0.2") For Ceramic boards (optional) the non-mountable area can be different *PCB Material: Phenolic/FR4/Composite Materials Ceramic boards require special conveyor sections (optional) *PCB Positioning: Locate pin fixation Adjustable Push up pins Adjustable Edge clamping Adjustable Sub stop (PCB waiting buffer) Adjustable *PCB Transport height: 900 mm ± 10 mm (35.4" ± 0.4") Standard SMEMA 953 mm ± 12.5 mm (37.5" ± 0.5") Standard Tedpoznmfasfx Acnob *PCB Ratio width/length: Max. 1:3 *Philips Topaz Machine dimensions and weight: Length: 1655 mm (5.4 ft) Height: 1865 mm (6.1 ft) Width: 1358 mm (4.5 ft) Width including feeders 2194mm (7.2 ft) Weight: 1150 kg (2535 Lbs)

Condition: used, Traysealer Multivac T350 These Multivac T-350 tray sealers are ideally suited for packaging food, medical, and pharmaceutical products. The automatic tray sealer achieves up to 6 cycles per minute, providing high production capacity. This sealing machine can process various types of trays, including plastic (PE, PP, PET), aluminum, and foam trays. The tray sealer can perform sealing, vacuum packaging, and MAP packaging (gas flushing). It is an ideal packaging machine for meat, fish, game, poultry, cheese, pet food, baby food, and other products. The machine is completely manufactured from stainless steel. Production capacity: 6 cycles/min Tjdpfx Aezulkhecneb Functions: sealing, vacuum, MAP gas flushing Equipped with: 2-compartment format: (2x) 158 x 125 mm Optional: Busch vacuum pump, 160 m³/h Voltage: 400 V (3 + N, 50 Hz) Power: 7.5 kW Dimensions (W x D x H): 3870 x 1150 x 2050 mm

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tedpfx Acjzrg T Esnjb Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, Year of construction: 1999, Used Machine Year of Manufacture: 1999 Features and Technical Specifications: - For cutting all types of veneer - Tight joints and tear-free - Cutting length: 3020 mm - Opening height: 60 mm - Cutting height: 45 mm - Motor: 1.8 kW Tjdpfozlbtysx Acnjb - Saw blade speed: 8700 rpm - Saw blade diameter: 180 x 16 mm - Includes a planing unit that can be coupled with or decoupled from the sawing unit - Horizontally and vertically adjustable - Joining blade head 85 x 50 mm, with 4 reversible blades - Front support table is adjustable (ball-bush guide) - With front support table and dust duct - Sliding stop from the front via position indicator - Veneer clamping via pressure beam using two external pneumatic cylinders - Rear support table with recessed measuring tapes and stop rail - Dimensions: 4780 x 1560 x 1290 mm - Weight: 520 kg Availability: Immediate Location: 63934 Röllbach

Condition: new, Year of construction: 2026, functionality: fully functional, Automatic carton sealing machine with label printing | 220V | NEW Description For sale is a new automatic carton sealing and labeling machine for professional use in shipping, logistics, e-commerce, fulfillment, and production. The system combines automatic carton sealing with adhesive tape with an integrated real-time label printing system. This allows cartons to be sealed and then labeled with individually generated labels within a single process. According to the manufacturer, the integrated thermal printing system supports barcodes, dates, logos, and other variable label information. Ideal for companies with regular package and carton shipping, as well as for integration into existing packaging and conveyor systems. Technical data according to the manufacturer: Tedpfjzwch Nsx Acnsb Capacity: approx. 800–1,000 cartons/hour Carton length: from 130 mm Carton width: 80–300 mm Carton height: 90–400 mm Adhesive tape width: 30–50 mm Power supply: AC 220 V / 50 Hz Power consumption: 1.83 kW Machine dimensions: approx. 2,400 × 800 × 1,680 mm Machine weight: approx. 180 kg Operating temperature: –10 °C to +50 °C Features / Functions Automatic carton sealing Sealing of top and bottom Integrated labeling system Real-time label printing Support for barcodes, date, logos, and other information Touchscreen operation Adjustable parameters Status and error display Roller conveyor technology Suitable for different carton sizes Suitable for integration into automated packaging processes Typical applications Mail-order business, e-commerce, fulfillment centers, warehouses and logistics, production facilities, packaging companies, and industrial end-of-line packaging. The machine is particularly suitable for companies that want to automate carton sealing and labeling in a single process. Condition: New Scope of supply and delivery time: upon request. If you are interested or have technical questions, please send us a message. We will also be happy to assist you with the planning of other packaging machines and automation solutions. Note: Technical specifications are based on the manufacturer's documents. Images may show optional equipment. Subject to technical changes and errors.

Condition: excellent (used), ZACMI 40-Cup Rotary Telescopic Filler – Stainless Steel ZACMI automatic telescopic filler with 40 cups, designed for the volumetric filling of solid and particulate food products into containers within continuous industrial production lines. Manufactured by ZACMI, the machine features a rotary telescopic filling system with 40 dosing cups, enabling the automatic and continuous feeding, dosing, and filling of the containers. This type of technology is particularly interesting for the canning industry, where a regular volumetric dosage of solid or particulate products is required, along with their proper introduction into cans or other rigid containers. Its construction, primarily in stainless steel, along with the rotary carousel and automatic transport systems, provides a robust solution for high-production industrial lines. MAIN FEATURES -Manufacturer: ZACMI -Type: Automatic telescopic filler -Number of dosing cups: 40 -Telescopic volumetric filling system -Rotary configuration -Multiple filling stations -Automatic product dosing -Automatic container handling Tsdpfx Acozw Dbwsnjb -Continuous container input and output -Integrated conveyor -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial production -Integrable into automatic canning lines APPLICATION The ZACMI filler is designed to perform continuous volumetric filling using a rotary system with 40 cups. The containers are automatically fed and transferred to the filling carousel. During the cycle, the dosing cups control the amount of product and transfer it into the container. Once filled, the containers automatically continue to the next stage of production. It can be integrated with: -Product feeding systems -Can feeders and conveyors -Liquid or brine dosing systems -Can sealers -Lid feeders -Weight checkers -Container washers -Pasteurizers and autoclaves -Labeling and end-of-line equipment APPLICATIONS Especially suitable for canning industries and processors of vegetables, legumes, and other solid or particulate foods that require a high-capacity automatic filling system. Depending on its configuration and installed format, it can be used with vegetables, legumes, olives, and other solid or particulate products intended for canning. The combination of 40 cups, rotary operation, and telescopic filling technology makes this ZACMI a particularly interesting solution for continuous production canning lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, MULTIVAC T300 | Automatic Tray Sealer Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG Model/Type: T300 Serial number: 226445 Year of manufacture: 2016 Power supply: 400/230 V, 50 Hz, 3/N/PE AC, 21.5 A, 5.5 kW Overall dimensions: 4050 x 1150 x 1700 mm Tooling dimensions: (2x) 190 x 130 mm (double-cavity tooling) Maximum fuse rating: 50 A Maximum short-circuit current: 5 kA Vacuum pump: Busch MRP150 (Serial number: 1530249) Vacuum pump capacity: 106/127 m3/h The MULTIVAC T300 is a highly advanced, fully automatic tray sealer designed for professional and hermetic packaging of food products. With its robust construction and precise sealing mechanism, this machine is a key piece of equipment in medium-sized and large meat processing plants, slaughterhouses, delicatessen plants, and industrial catering kitchens. The use of vacuum technology allows for the safe packaging of meat, ready meals, and dairy products, which significantly extends their shelf life and improves their presentation on store shelves. Tedpfxjzutils Acnjb The model presented, manufactured in 2016, is integrated with an extremely efficient and reliable vacuum pump from the renowned German brand Busch (model MRP150) with a capacity of up to 127 m3/h. This configuration guarantees fast and stable air evacuation in every phase of the production cycle. The installed double-cavity tooling, with dimensions of 190 x 130 mm, enables smooth continuous operation while maintaining excellent sealing consistency. The mechanical equipment and pneumatic system of this class are characterized by exceptional durability, which effectively minimizes the risk of unscheduled downtime.

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, Spindle moulder manufactured in 2008. This Colombo AM 60 features a robust design suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the Colombo AM 60 spindle moulder we have for sale. Contact us for further details. • Control: Computer / PLC-controlled • Display: 12" colour LCD-TFT • Interface: RS232 • Operating system: Windows • Saw unit – blade diameter: 400 mm • Saw spindle diameter: 30 mm • Saw blade speed: 3,000 rpm • Saw motor power: 3 kW • Tenoning spindle diameter: 50 mm Tjdpfx Aezvcqbjcneb • Effective spindle length: 600 mm • Max. tool diameter: 320 mm • Effective travel: 550 mm • 1st profiling spindle diameter: 50 mm • 1st profiling spindle effective length: 600 mm • 1st profiling spindle max. tool diameter: 200 mm • 1st profiling spindle speed: 6,000 rpm • 1st profiling spindle motor: 7.5 kW • 1st profiling spindle effective travel: 550 mm • 2nd profiling spindle diameter: 50 mm • 2nd profiling spindle effective length: 600 mm • 2nd profiling spindle max. tool diameter: 220 mm • 2nd profiling spindle speed: 6,000 rpm • 2nd profiling spindle motor: 2.2 kW • 2nd profiling spindle effective travel: 550 mm • Glass bead spindle diameter: 35 mm • Glass bead spindle effective length: 20 mm • Glass bead tool diameter: 200 mm • Glass bead spindle motor: 2.2 kW • Tape/feeding carriage speed: 1–80 m/min • Safety enclosure: Sound-insulated safety guarding

Year of construction: 2019, condition: ready for operation (used), Ulma weighing and packing line Complete weighing and packaging line with an Ulma multi-head weigher and an Ulma vertical bagger. This line consists of the following machinery: 1. Infeed conveyor belt; 2. Ulma multi-head weigher; 3. Ulma VTI 200 vertical bagger; 4. Outfeed conveyor belt; 5. Platform; 6. Stair; Ulma Multi-Head Weigher Manufacturer: Ulma Year: 2019 Max. weighing speed: 30 bags/minute Number of heads: 10 Volume of heads: 2.5 liters Max. weighing range: 5,000 grams Power: 400V / 50Hz / 1kW Ulma VTI 200 Vertical Bagger The VTI 200 machine has been specifically designed for the packaging of a wide range of different product types and focuses on markets where the main requirements are simplicity, reliability, and ease of operation. The combination of pneumatic operation of the horizontal sealer and an AC motor for the draw-down belts provides the machine with great versatility for use in many different environments. The robustness of all mechanical and electrical parts, a compact design, and ease of operation, together with low maintenance requirements, make it the ideal competitively priced machine for intermediate-speed applications. The machine is operated via a 5" color touch screen with an integrated industrial PC. All machine parameters are adjusted and saved within this interface, resulting in a very flexible and quick changeover machine. Manufacturer: Ulma Model: VTI 200 Year: 2019 Capacity: Max. 70 bags/minute Film reel width max.: 600 mm Todpfozvc Dzex Acnsb Film reel outer max.: 450 mm Film reel core max.: 76 mm Power: 400V / 50Hz / 4kW The machine is equipped with the following tool: Bag Type: Pillow bag; Bag dimensions: BOPP L x W 145x145mm / Laminate L x W 170x170mm Foil width: BOPP 310mm / Laminate 365mm; Max product dimensions: 70mm

Condition: new, Year of construction: 2026, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Todpfszr Hp Hox Acneb Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-1AWS_2, The VOGEL MH-FJ-1AWS carton sealing machine has a side drive belt system. The machine is specially designed for cartons in smaller formats. Carton formats: Length 160 - ∞ mm Width: 90 - 320 mm Height: 60 - 280 mm Technical data: Length 1,090 mm Width 890 mm Weight 85 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors. Tedezr Hr Uopfx Acnsb

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-1A_1, The VOGEL MH-FJ-1A carton sealing machine has a side drive belt system and an additional drive belt in the upper section of the machine. The advantage lies in the stability - high cartons cannot tip to the side. Carton formats: Length 150 - ∞ mm Width: 120 - 480 mm Height: 120 - 480 mm Technical data: Length 1,090 mm Width 1,050 mm Weight 200 kg Operating voltage 220 V CE marking Todszr H Hlopfx Acnjb Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Tedszvp Uyepfx Acnsb