Used Surface Roughness Measuring Device for sale (21,996)

Condition: excellent (used), Year of construction: 1994, total length: 2,950 mm, total width: 2,100 mm, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 400 kg, feed rate X-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, grinding wheel diameter: 350 mm, table length: 600 mm, table width: 400 mm, Digital read out system position slides 5 stones and flanches Coolant and Filtration system CE Mark Levelling pads included  Full set off books  X - Travel: 650mm Y - Travel: 400mm Z - Travel: 400mm Table Length: 600mm Table Width: 400mm Guodsyvhxmjpfx Ankjb Table load: 400 Feed rate X-Axis: 0-5000mm/min. Feed rate Z-Axis: 0-5000mm/min. Grinding stone dimensions:350 x 127 x 50mm Power: 6kW Speeds: 1400Rpm Cooling system: Yes Feed rate Y-Axis: 0-5000mm/min. Length: 2950mm Width: 2100mm Height: 2000mm Weight: 2550kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, grinding length: 1,200 mm, grinding width: 600 mm, total length: 3,500 mm, total width: 1,875 mm, feed length X-axis: 1,320 mm, feed length Y-axis: 730 mm, feed length Z-axis: 480 mm, feed rate X-axis: 1,320 m/min, feed rate Y-axis: 730 m/min, grinding wheel diameter: 350 mm, table length: 1,200 mm, table load: 1,400 kg, table width: 700 mm, Surface grinder LGB France - R12070SM MACH-ID 9600 Make: LGB France Type: R12070SM Year: 2009 X - Travel: 1320mm Y - Travel: 730mm Z - Travel: 480mm Table Length: 1200mm Table Width: 700mm Table load: 1400 Grinding stone dimensions:350 x 50 x 127mm Power: 16kW Speeds: 1500Rpm Length: 3500mm Width: 1875mm Gjdpfx Ajy Edctenkoub Height: 2250mm Weight: 4500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, total length: 9,800 mm, total width: 4,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 5,000 m/min, table length: 3,000 mm, table load: 6,000 kg, table width: 1,200 mm, power: 22 kW (29.91 HP), Surface grinder Ziersch - Z1030 MACH-ID 9597 Make: Ziersch Type: Z1030 Control: Mitsubishi Touch Year: 2018 X - Travel: 3500mm Y - Travel: 1100mm Z - Travel: 1100mm Table Length: 3000mm Table Width: 1200mm Table load: 6000 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:500 x 100 x 203mm Power: 22kW Speeds: 3000Rpm Cooling system: yes Gedpfx Aey En Dnjnkeub Feed rate Y-Axis: 3000mm/min. Length: 9800mm Width: 4000mm Height: 4500mm Weight: 27500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2001, grinding length: 650 mm, grinding width: 525 mm, total height: 350 mm, table length: 600 mm, table width: 350 mm, Manufacturer: Geibel & Hotz Type: FS 635-Z SA Control: Digital read out Year of construction: 2001 Magnetic table 600 x 350 mm Closed housing for CE Automatic vertical lubrication SA Automatic lubrication Coolant tank Specifications Metric US Standard X - axis 650 mm Y - axis 525 mm Z - axis 350 mm Table length 600 mm Table width 350 mm Table load 400 Feed X - axis 35000 mm/min. Feed Z-axis 1000 mm/min. Grinding stone dimensions 300 x 50 x 76.2 mm Gsdpfx Aevdal Asnkjub Power output 3.7 kW Speed 2800 ? rpm Dimensions (estimate) length 3200 mm width 2000 mm height 2870 mm weight 2300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2007, condition: good (used), Make: HAEUSLER Type: Clamp Year: 2007 Specifications Metric US Standard Min. shell inner diameter 1800 Max. shell inner diameter 5500 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 10 mm Maximium wall thickness 40 mm Max. section weight 15 T Max. weight total workpiece 60 T Gsdpfxokwcn Ee Ankjub Dimensions (Estimate) Length 24000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, grinding length: 1,200 mm, grinding width: 200 mm, total height: 2,750 mm, total length: 5,200 mm, total width: 2,700 mm, feed length X-axis: 2,200 mm, feed length Y-axis: 1,240 mm, feed length Z-axis: 630 mm, table length: 2,000 mm, table load: 3,000 kg, table width: 1,200 mm, overall weight: 9,800 kg, power: 20 kW (27.19 HP), grinding wheel speed: 1,200 rpm, Surface grinder LGB France - R-12020 MACH-ID 9599 Make: LGB France Type: R-12020 Year: 2007 Gujdjy Ec Ihspfx Anksb X - Travel: 2200mm Y - Travel: 1240mm Z - Travel: 630mm Table Length: 2000mm Table Width: 1200mm Table load: 3000 Grinding stone dimensions:450 x 80 x 127mm Power: 20kW Speeds: 1200Rpm Length: 5200mm Width: 2700mm Height: 2750mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Used machine Jointer: Working width: 500 mm Total table length: 2200 mm 4-knife cutterhead with segmented planer knives Motor: 4 kW Thickness planer: Min. working height: 3 mm Max. working height: 235 mm Max. chip removal: 8 mm Digital height adjustment display with decimal readout Gjdpfx Aney Rvldjkoub Feed speed: 7.5/15 m/min Availability: short-term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2010, 1" image sensor, 6.6 megapixels, CMOS Godey Ru Eispfx Ankeub Double telecentric lens Z-axis travel distance 30 mm Z-stage maximum load 3 kg

Condition: used, Year of construction: 2002, total width: 600 mm, total length: 600 mm, total height: 800 mm, Colour: Grey Empty weight: 50 kg Price: On request Guedoyu Sl Hopfx Ankob - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 97370 - Transport dimensions: 600mm x 600mm x 800mm (l x w x h) - Transport weight [kg]: 50kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,650 mm, total length: 4,700 mm, total width: 2,100 mm, Colour: Grey Empty weight: 5.500 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 700 - Table width [mm]: 1200 - Table depth [mm]: 400 - Magnet width [mm]: 1200 - Magnet depth [mm]: 300 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 4700mm x 2100mm x 2650mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Guodpsx Dkggefx Ankob Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,620 mm, total length: 1,750 mm, total width: 1,400 mm, Colour: Grey Empty weight: 2.500 kg Gsdpfx Anoyh Amlsksub - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs]: 3 - X-axis travel [mm]: 500 - Y-axis travel [mm]: 230 - Z-axis travel [mm]: 330 - Table width [mm]: 720 - Table depth [mm]: 200 - Magnet width [mm]: 460 - Magnet depth [mm]: 180 - Options: External cooling - Transport dimensions: 1750mm x 1400mm x 1620mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1994, Colour: Grey Empty weight: 2.000 kg - Year: 1994 - Documentation available: No - CE certificate present: No Guedpfxjyvf Tgo Ankeb - Serial number: 8139 - Drive system: Conventional - Power [kW]: 7.1 - Number of axes [pcs]: 3 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 600 - Table width [mm]: 1500 - Table depth [mm]: 400 - Magnet width [mm]: 600 - Magnet depth [mm]: 300 - Max. grinding wheel diameter [mm]: 300 - Max. grinding wheel thickness [mm]: 50 - Main spindle power [kW]: 4.5 - Max. spindle speed [rpm]: 1750 - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2004, Table size 450 x 150 mm Max. Grinding area 450 x 150 mm Grinding wheel dimensions 180 x 13 x 31,75 mm Min. / max. distance table / spindle center 450 mm Table speed manual Cross feed manual Handwheel, transverse 1 revolution 5 mm 1 graduation mark 0.02 mm Vertical infeed manual Handwheel, vertical 1 revolution 2 mm 1 graduation mark 0.01 mm Grinding motor speed 2900 rpm. grinding motor 1,5 kW Machine dimensions L x W x H approx. 1820 x 1280 x 1950 mm Weight 870 kg Accessories / Special features: - 2-axis digital display - Permanent magnetic clamping plate L x W 450 x 150 mm - Manual grinding wheel dresser - Manual fine adjustment vertical + cross - 1 pc. grinding wheel with flange - Lighting system - exhaust system - Coolant system - Machine feet - CE conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Gsdpfx Aneh Ukrqoksub D - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. Grinding area 600 x 300 mm Dimensions of grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulic infinitely variable 5 - 25 m/min. cross feed 0,1 - 20 mm Cross feed 900 mm/min. Handwheel, transverse 1 revolution 5 mm 1 graduation mark 0.02 mm Automatic vertical infeed 0.001 - 0.999 mm/time Handwheel, vertical 1 revolution 2 mm 1 graduation mark 0.01 mm Euei3ccb with the AD 5 (automatic infeed) 0.005 mm Gjdsizka Ispfx Ankeub Grinding motor speeds 1450 / 2900 rpm. grinding motor 1,5 / 3,7 kW hydraulic pump motor 0,75 kW drive motor , transverse 1,1 kW Drive motor , vertical 1,1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: - 2-axis digital display - Automatic vertical infeed with spark-out and subsequent upward movement - Electro-magnetic clamping plate L x W 600 x 300 mm - Manual grinding wheel dresser - Grinding wheel speed, 2 steps - 1 pc. grinding wheel with flange - Control panel - illumination - Coolant system with belt filter and magnetic separator - Machine feet - CE conform Siegfried Volz Machine Tools Rüschebrinkstr. 11-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1987, machine/vehicle number: 8748, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: manual, rotational speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, overall weight: 745 kg, SAC surface planer FS 430, max. planing width 430 mm, table length 2,900 mm, infeed table 1,550 mm, outfeed table 1,310 mm, segmented cutterhead 430 x 35 x 3 mm, planer fence 1,300 x 160 mm, tiltable 0 - 45°, motor 3 kW (4 HP), weight approx. 745 kg, as inspected, ex location Seevetal, without transport, subject to prior sale. Guodjy Slzqopfx Ankob

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 197367, Accuracy & Performance Length measurement error (MPE): Standard: 1.5 + L/350 µm Enhanced (Navigator mode): 0.9 + L/350 µm Probing error (MPE_P): 1.2 µm Scanning error (MPE_THP): 1.7 µm Form measurement error (RONt): 1.3 µm Repeatability (MPL): 0.7 µm Scanning speed: Up to 500 points/sec Acceleration: Up to 1.2 m/s² Max. vector speed: 520 mm/s 🔧 Sensor & Probe Options Standard probe: ZEISS VAST gold or VAST XTR gold Minimum stylus tip diameter: 0.3 mm Multi-sensor support: Optical (ViScan, LineScan), tactile (VAST XXT, RDS) � �️ Environmental Conditions Operating temperature: 15–30 °C Accuracy guaranteed: 18–22 °C Humidity: 30–60% non-condensing Vibration damping: Passive elastomer system ⚙️ Control & Software Controller: ZEISS C99L Software: ZEISS CALYPSO, HOLOS, GEAR PRO CAA (Computer-Aided Accuracy): Real-time dynamic correction Navigator technology: Automatically adjusts scanning speed for optimal precision Gedpfx Anjy Sllcekeub

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: X25S52452233, warranty duration: 9 months, type of input current: AC, input voltage: 230 V, overall weight: 52 kg, arm reach: 2,500 mm, number of axes: 7, FARO Quantum Max Arm, X.S, 2.5m, 7 axes (premium model, portable 3D measuring arm) with LLP Price excluding VAT Demonstration unit from October 2024 with manufacturer’s warranty until November 2026 Arm weight: approx. 8 kg; including all accessories, total weight is around 52 kg Serial no. arm: X25S52452233, serial no. LLP: LLP0P2443474, serial no. tripod: 42949 Scope of delivery includes: - FARO Arm Quantum X.S, 2.5m, 7 axes (demo device, 10/2024) - Calibration set - Transport case - Mounting plate - 3mm and 6mm iProbes - USB cable, power supply, 230V Swiss plug - Rechargeable battery - Laser Line Probe for scanning function, FAROBlu xP including calibration set and case - FARO folding tripod - Manufacturer’s warranty until 11/2026 Optional: FARO software available at extra cost after consultation to meet your needs Quantum Max X.S: This is the premium model, delivering industry-leading precision. It is designed for companies that require uncompromising accuracy and performance for their most critical applications, tightest tolerances, and certification processes. The Quantum Max Arm ensures exceptional accuracy and repeatability, making it ideal for solutions in critical quality control tasks, inspections, CAD comparison, reverse engineering, and as-built documentation. The arm is flexible for use both in production (shop floor) and in dedicated metrology labs. Gusdpfxeymlybo Anksb The 7-axis model offered here extends its functionality with an additional rotary axis (often at the arm’s wrist). This seventh axis provides enhanced flexibility and maneuverability, especially beneficial when a laser scanner is mounted to the arm. It enables easier movement of the scanner around obstacles and efficient, complete scanning of complex-shaped surfaces. The Quantum Max Arm is compatible with various probes and laser scanners (the FAROBlu® LP is included in this package), highlighting its versatility for diverse inspection requirements. Its intuitive software and user-friendly hardware allow for quick familiarization and efficient workflows. Custom-fit measurement accuracy: X.S: Industry-leading, highest precision for critical applications and tightest tolerances. Versatile configurations (axes): 7-axis arm: Additional flexibility and maneuverability, ideal for use with mounted laser scanners and capturing complex geometries. Rugged construction: Engineered for reliable operation in harsh industrial environments with integrated protection against temperature, vibrations, and overload. Portability: Lightweight and portable, enabling measurements directly on the shop floor, in the lab, or on-site—reducing transport time and costs. Wide range of applications: Ideal for dimensional analysis, CAD comparison, quality control, as-built documentation, reverse engineering, component inspection, and certification. Compatibility with various probes and scanners: Adapts to specific measurement requirements (touch probes, laser line scanners). Easy operation: Intuitive user interface and ergonomic design for quick training and efficient workflows. Enhanced data quality: Provides detailed and accurate 3D data for well-informed decisions in manufacturing and quality assurance.

Year of construction: 2009, condition: used, For sale is our welding system from AEF Hauzenberg. This is an electrode welding system. Inside the unit, there are three zones where welding processes can be carried out simultaneously. The system is equipped with a control cabinet featuring a PLC, allowing the process parameters of the welding operation to be set. We used Silfos (AG) brazing alloy. Included in the delivery is also a water chiller from Habor, model HWK-1000PTSB2. Gedey Skq Rspfx Anksub

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinding machine 1600 x 630 M7163x16100, magnetic table size 1600 x 630 mm, machine length 5400 mm, depth 2500 mm, height 2600 mm. Automatic feeds in X and Y axes. We are the first owner, the machine has been used on average a few hours per month – grinding for maintenance purposes. Year of manufacture 2008. Power 22KW, 60A. Gedpjy Shzajfx Ankeub

Condition: used, Year of construction: 2002, Used coordinate measuring machine, manufacturer: Mitutoyo, model CRT-A 122010, year of manufacture: 2002, serial number: N0001301. Machine features: - PC and software - Probe set (as shown in pictures) - Control: JSBOX-M Type A - Renishaw probe head PH10MQ / TP200 - Control unit UC240H Guodsy N Rinjpfx Ankjb A set of transport locks is included with the machine. Last calibration date: 12/09/2024 Quantity: 1 Condition: Used Asset location: Schaeffler Ultra Precision Drives GmbH i. L. Ohsener Str. 79 – 83 31789 Hameln, Germany Delivery terms: EXW (Incoterms 2020) Sale on an "as-is, where-is" basis, ex location. The buyer is fully responsible for dismantling and removal of the equipment. Maynards can suggest a dismantling supplier upon request. Payment terms: Immediately after receipt of invoice. If any surcharges apply, further information will be provided on the invoice. Seller: Maynards Europe GmbH Maynards sells and invoices the item on behalf and in the name of the stated seller.

Condition: good (used), Johann Fischer Aschaffenburg / Surface Plate / Measuring Table with Base Cabinet - Surface plate with substructure (mobile) - Table size: 1.5x0.6 meters - Accuracy: DIN 876 /1 - Mobile on base cabinet with drawers Dimensions (LxWxH): 1.5x0.6x0.9 meters / 550 kg Gedpsy Shaisfx Ankeub Subject to errors and input mistakes.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, total height: 1,850 mm, total length: 1,960 mm, total width: 1,480 mm, feed length X-axis: 800 mm, feed length Y-axis: 415 mm, workpiece weight (max.): 500 kg, feed rate Z-axis: 360 m/min, grinding wheel diameter: 350 mm, distance table to spindle center: 520 mm, table length: 800 mm, table load: 500 kg, type of input current: three-phase, table width: 400 mm, grinding wheel width: 30 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,800 kg, grinding spindle motor power: 4 W, SURFACE GRINDER SP-4080AHR • Rapid vertical feed to the workpiece • Coolant tank with magnetic filter • Digital readouts on 2 axes • Free-standing hydraulic unit with heat exchanger • Longitudinal and cross guides hardened and ground • Table with longitudinal flat guide and cross triangular guide • Electromagnetic chuck • Balancing arbor • Grinding wheel flange • Accessibility for operators with disabilities • Grinding wheel with holder • Wheel dresser • Cooling system • Central lubrication system • Work area lighting • Set of basic adjustment tools • Table cover • Leveling bolts and washers • User manual in Polish • CE Declaration of Conformity Working table size mm 400x800 T-slots (number x width) pcs/mm 1/14 Max. longitudinal travel mm 800 Cross travel mm 415 Max. distance from spindle axis to table mm 520 Longitudinal feed of working table mm/min 3-20 Table feed Automatic mm/min 0-8 Rapid mm/min 600 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Vertical feed of spindle head Gedpfx Ansy Sgdgokeub Automatic mm/min none Rapid mm/min 360 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Grinding wheel Rotational speed rev/min 2800 Size mm 350x30x127 Grinding accuracy mm 300/0.005 Surface finish Ra 0.32 Spindle motor power kW 4.0 Cross feed motor power kW 0.04 Max. working table load kg 500 Overall dimensions (LxWxH) mm 1960x1480x1850 Gross weight kg 1800

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 1,800 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, power: 61 kW (82.94 HP), fork length: 1,200 mm, empty load weight: 7,760 kg, total length: 3,755 mm, drive type: Diesel, construction width: 2,070 mm, Rough terrain forklift Load center: 600 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Refurbished without warranty Technical condition: Normal Front tire type: Pneumatic Guedpfxjy N E Dgj Ankob Front tire size: R 22 Front tire condition: 20 - 40% Rear tire type: Pneumatic Rear tire size: R 18 Rear tire condition: 20 - 40% Sideshift, 3rd valve, rear work light, front work light, full cab,

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Guedoy N Dvbopfx Anksb Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: reconditioned (used), Heavy-duty surface planer Solid German engineering Finely planed machine tables, total table length 3000 mm Table adjustment with ball bearings Chip removal system with micrometer gauge Adjustment for hollow and pointed edges with scale display Dressing fence in heavy cast iron design - 45 degree swivel and height adjustable Machine completely rewired Automatic star-delta start Motor protection switch Motor brake Emergency stop switch CE Blade shaft with 4 strip blades Cutter head diameter 120 mm Planing width: 410 mm, Working table length: 3,000 mm, Cutterblock speed: 5,000 rpm, Motor 400 V, 4.0 kW, 50 Hz Weight approx. : 1050 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. Gjdpfx Anevi H Nfjkjub - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).