Used Stegherr Profile Cutting Machine for sale (68,221)

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Fedpfxeu Tg Spe Alqogb Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: used, functionality: limited functionality, Year of construction: 2010, operating hours: 8,472 h, machine/vehicle number: 10036188/30012864, control type: CNC control, controller manufacturer: Bystronic, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-2000, laser hours: 8,472 h, laser power: 2,000 W, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 3 mm, working length: 3,048 mm, working width: 1,524 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 70 mm, positioning speed: 140 m/min, repeat accuracy: 0.1 mm, workpiece weight (max.): 890 kg, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 6 bar, overall weight: 15,000 kg, total length: 11,018 mm, total width: 6,055 mm, total height: 2,565 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Bystronic Bysprint Fiber 3015 Immediately available Manufacturer: Bystronic Model: BySprint Fiber 3015 Year of manufacture: 2010 / new resonator and cutting head in 2013 Sheet format: Large format 3000mm x 1500mm Operating hours: 8,472 laser hours / 42,600h machine on Prospective buyers are welcome at any time; we can gladly demonstrate and test the machine on-site. Fgedpfxoy I Dgke Alqob Standard equipment: - BySprint Fiber 3015; Fiber 2000 - Shuttle table system with 2 shuttle tables - Scrap cart with rollers - Restart Manager - Uninterruptible power supply (UPS) - Piercing jet - Nozzle cleaning - Operator safety in the cutting area - Operator safety in the loading/unloading area TECHNICAL DATA: - Max. positioning speed (X/Y axes parallel): 100 m/min - Max. simultaneous positioning speed: 140 m/min - Positioning deviation Pa (VDI/DGQ 3441): +/- 0.1 mm - Positioning scatter Ps (VDI/DGQ 3441): +/- 0.05 mm - Edge detection accuracy: +/- 0.5 mm - Max. workpiece weight: 890 kg - Table changeover time: 35 seconds - Laser power: 2,000 watts - Max. sheet thickness: - Steel: 12 mm - Stainless steel: 6 mm - Aluminum: 8 mm - Brass: 4 mm - Copper: 3 mm - Machine weight (without extraction, chiller): approx. 12,000 kg - Machine dimensions without platform: approx. 11,000 mm length, 6,055 mm width, 2,565 mm height (extraction H=3,000 mm) - Machine dimensions with platform (as installed at our site): approx. 11,000 mm length, 4,200 mm width, 5,500 mm height (recommended H=7,000 mm) Platform is not included in the sale! Dismantling, loading, and transport should preferably be organized by the buyer to ensure proper reassembly. Various aids can, if available, be provided by arrangement. All information and dimensions are provided to the best of our knowledge and belief; however, we cannot guarantee completeness or accuracy! The sale is as seen, without guarantee, return, or similar. Subject to prior sale.

Condition: used, Year of construction: 2021, functionality: fully functional, "COMUR" brand trimming machine, model R220, CNC, with 7 axes + robotic automation for double-wheel grinding machine loading Fgsdpfx Aloy I Ar Ejqob

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2009, operating hours: 32,454 h, Cuttable materials: Mild steel, stainless steel, aluminium alloys, brass, copper Tube loading capacity: 6,500 mm Tube processing limits: Round tube min. 8 mm max. 102 mm Square tube min. 10x10 mm max. 80x80 mm Rectangular tube min. 15x10 mm max. 100x80 mm Fodpfx Asy Iz Hzolqogb Solid round bar min. 12 mm max. 40 mm

Condition: good (used), Polar Mohr 78 ED Paper Guillotine Very low mileage, very good condition. The machine was purchased from a school workshop and has not been used in production. Technical specifications: Cutting width: 780mm Stack height: 120mm Color LCD display Power supply: 400V Weight: 1400kg Enlarged side tables Fgodpey Hgk Nefx Alqjb Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), functionality: fully functional, Year of construction: 2000, Equipment: CE marking, PLS2500 2D laser with 2 x cutting table with usable area: 3140 x 1640 x h100mm, Axis stroke 3000x1500x150mm (XYZ), Maximum speed linear axes 40m/min (XY) and 20m/min (Z), Fjdjxx R A Dspfx Alqogb Neck LGL France type NLEX 35, Sideros Engineering dust extraction system 3000W CO2 laser source DOCUMENTATION AVAILABLE. Machine dismantled and prepared for loading. It was in perfect working condition. Special price for immediate purchase.

Condition: excellent (used), Year of construction: 2018, LARA CDCH-1400 SHEAR (year 2018) With discharge table. Hydraulic shear designed for cross-cutting strip material and managing scrap in coil feed lines. Supplied together with a discharge table, allowing for convenient and safe evacuation of cut material while maintaining a clean and continuous production process. Robust equipment with heavy-duty industrial construction, especially suited as an auxiliary component for cutting, stamping, or coil-feeding lines. Main Features • Hydraulic cross-cut shear • Hydraulic drive • Robust design for continuous operation • Clean and precise cutting of metal strip • Integrated discharge table • Facilitates evacuation of scrap and off-cuts • Improves ergonomics and orderliness on the line • Keeps the work area clear • Heavy-duty industrial construction • Rigid and stable frame • Designed to be integrated at the same height as the LARA feeder/straightener • Easy integration into existing lines • Safety system • Integrated into the line control system • Designed in compliance with CE standards Fsdpfjy Edlhox Alqegb Work Materials • Carbon steel • Stainless steel • Aluminum and light alloys Main Technical Data • Maximum working width: up to 1,400 mm • Type of drive: hydraulic • Working pressure: 4–6 bar (pneumatic control system) • Power supply: 400 V / 50 Hz

Condition: good (used), Cutting machine EBA 551-06, Item no. L1121 Fgedpfx Alsx Rclkoqsb

Condition: new, Year of construction: 2024, Brand New Guillotine available on stock in Europe It equipped with AC digital servo control technology; 15-inch colorful touching LCD.Automatic lubrication. The data resolution rate is 0.01mm. It has self-diagnostic function of troubles and displays the operating pattern, and has 300 program units, over 30000 different cutting positions,With the function of Memory,storage,dynamic tracking,max feeding speed 30m/min Model / Specifications - Brand New with one year warranty Fgsdpfjtypgrex Alqsb 92 Cutting width(cm) 92 Max.cutting height without assistance pressing plate(cm) 13 Max.cutting depth(cm) 93 Min cutting depth without assistance pressing plate(cm) 2.3 Extended length of working table(cm) 65 Height of working table(cm) 86-90 Machine width including side working table(cm) 233 Total length of working table(cm) 198 Cutting speed(r/min) 45 Max. Paper pressure(n) 35000 Power of main motor(kw) 3 Motor for paper feeding(kw) 0.75 Air pump(kw) 0.55 Machine weight(kg) 2400 Overall dimension(cm) 223x132x183

Year of construction: 2023, condition: as good as new (ex-display), PY-1200 is an ideal and professional machine in die-cutting，creasing，embossing and full-stripping various PE coated paper, normal paper, corrugating paper and plastic material. It applies to paper cup,paper box,medical package,wine package,food package and other environmental protection products. Cut Precision ~ 0.10mm Production Capacity 150-210 times/min Fgsdpjxnkdgsfx Alqsb Max cutting size 120x64 cm Maximum pressure 350 tons Total power 14.5 kw Total weight 8400 kg overall dimensions 4.2x2.3x1.85 m

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 41,569 h, machine/vehicle number: 77510200, control type: CNC control, controller manufacturer: Fanuc, controller model: AMNC 3i, laser type: CO₂ laser, laser source manufacturer: Fanuc, laser source model: C4000, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, On behalf of an authorized party, we are offering the following used item for sale by bid: Amada CO² Laser Cutting Machine Model FO-3015 NT II RI Laser Machine FO-3015 II RI Model: FOM2RI3015-C4 Operating hours: 41,569 h Laser specifications: 4,000 W CO2 Laser / Flying Optics Working area (X x Y): 3,070 x 1,550 mm Controller: AMNC 3i (21.5" screen size) Serial No.: 77510200 Year of manufacture: 2013 Including transformer TG513 Serial No. 987 Including cooler-extraction combination PC5011FOm24kw Serial No. 7196850001 LST3015 RI pallet changer for FOM23015RI LSTRI3015-CL Serial numbers: (30153398) Full demineralization unit type B5 Serial No. 31164908 with cartridge and conductivity meter Other condition notes: Last maintenance by Fanuc: 05.01.2023 at 38,095 h - Replacement of O-rings on the laser tube - Replacement of internal mirrors Turbo blower replaced at 24,000 h - Next replacement due at 48,000 h RI unit pneumatic valves partially leaking, inspection required Including various light barriers and a safety fence for the loading and unloading area Fsdpfx Aloy Iwixeqogb Price is ex works/collection. The item is located in Erftstadt and must be collected by the buyer at that location. This offer refers exclusively to the described item. Other items possibly shown in the pictures may be part of a different offer. Errors subject to change. Inventory number: 2893-82

Condition: used, Year of construction: 2016, machine/vehicle number: ZT 461, saw blade diameter: 250 mm, overall weight: 6,000 kg, type of input current: three-phase, total height: 2,150 mm, TECHNICAL DATA: - Length of the material: max. 4200 mm - Capacity in Width: max. 1500 mm - no. 2 cutting motors of 3 kW – 3000 r.p.m. (with inverter), with nose Ø 30 mm for saw-blades Ø 250 mm with inlet suction hoods with no. 2 safety guards with suction attachment Ø 80 mm - no. 1 milling motor for milling head (t): 5 kW – from 2000 to 3500 r.p.m. with inverter - with nose Ø 35mm for shaped mills Ø 360 mm with inlet suction hoods Fsdpfx Aley Iwh Isqsgb - no. 2 suction hoods for heads carriage Ø 160 mm - Self-braking brushless motor of 4,6 Nm for head-holder carriage advancement. - Cutting speed regulation from 2 to 30 m/min', max. return speed of the head 75 m/min' - Self-braking brushless servomotor of 2,2 Nm for pincers carriage advancement, positioning speed with regulation by CN from 2 up to 60 m/min' - Working table height: 990 mm - no. 2 fans for air pads: 1,1 kW - Supply power: 400 V/ 50 Hz - Total power employed: 20 kW - Machine color: grey RAL 7036 and grey RAL 7035 - Overall dimensions: 4730 x 7440 x 2150 H mm - Weight: 6000 kg approx.

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 3,000 W, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, pipe diameter (max.): 250 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, compressed air connection: 6 bar, overall weight: 3,000 kg, total length: 12,600 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, ACME-CNC Tube and Profile Laser Cutting Machine 6025D – Precision Meets Cost-Effectiveness Enter modern tube and profile processing efficiently with our CNC-controlled laser cutting machine. Combining high quality with an exceptionally attractive price, it is the ideal solution for beginners as well as small and medium-sized enterprises. Benefit from precise cuts, reliable performance, and significant labor savings in your daily operations. Even small batch sizes can be produced cost-effectively—flexibly, quickly, and without compromising on quality. The machine stands out thanks to its robust construction and the use of selected components from renowned manufacturers. At the same time, the user-friendly control system ensures that you and your team can become productive quickly, without lengthy training periods. German-speaking service and modern online support are always available to assist you, ensuring maximum operational reliability. Your advantages at a glance: - Excellent price-performance ratio - Ideal for beginners and smaller businesses - Precise cutting of tubes and profiles - Efficient even for small batch sizes - Significant time and cost savings Fodjy Iv Tvjpfx Alqogb - Easy operation and rapid familiarization - High-quality components from leading manufacturers - Reliable German-speaking service & online support - Machine can be supplied with an automated loading device on request - Optional 45-degree laser head available - Unloading length up to 6 meters available - Laser power from 3, 6, and 12 kW available

Condition: new, Year of construction: 2024, shaft diameter: 80 mm, Profile bending machine AHB 100 - with universal rollers - Three roller drive - Digital display left and right bending axis - Hydraulic lateral rectifier - Hydraulic drive of the bending rollers - Vertical and horizontal operation - built according to CE standards - Bending capacity flat bars max. 12 x 20 mm - Flat bent 200 x 40 mm - U profile inside and outside 180 mm - Angle profile web outside 100x100 mm - Angle profile web inside 90x90 mm - Solid material round 75 mm - INP 140 - Shaft diameter 100 mm - Roller diameter 315 mm - Bending speed 5 m/min. - Motor power 11 KW - Weight 2600 kg - module max Wcm3 Fedpovaw Elefx Alqogb -400 Volt 50 Hz. 3 ph. -1950x1600x2100 mm

Condition: excellent (used), Year of construction: 2018, operating hours: 3,200 h, functionality: fully functional, repeat accuracy: 0.01 mm, travel distance X-axis: 3,002 mm, travel distance Y-axis: 1,502 mm, travel distance Z-axis: 300 mm, positioning accuracy: 0.02 mm, workpiece weight (max.): 4,500 kg, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 300 mm, operating pressure: 4,000 bar, cutting speed: 8,000 mm/min, power of the servo motor: 2,000 W, table load: 4,500 kg, compressed air connection: 6 bar, product height (max.): 300 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Machine: STM 1530 PremiumCut 3D 12° angle compensation Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Great condition, fully functional, purchased new in October 2018. Machine is located in EU, Zagreb, Croatia, possible cutting test at our place. Only 3200 pump operating hours, automatic pressure control, automatic abrasive control, cutting angle compensation, possible upgrade with turning machine and drilling unit for piercing sensitive materials, durable machine frame (aluminium alloy + stainless steel), equipped with high quality parts. 1. Waterjet cutting system STM 1530 PremiumCut 3D 12° angle compensation Robust CNC milled absolutely rust-proof construction in aluminium and stainless steel High-precision robust rack and pinion drive with helically toothed racks Premium guide X & Y axis with Bosch Rexroth™ with high-precision ball-bearing carriage and stainless steel balls Threefold dirt scraper package Working area accessible from 3 sides for simplified loading and unloading Underwater cutting is possible CNC milled workpiece holder with heavy-duty frame for parts with weights of up to 1,000 kg/m² The scope of supply contains the required lubricants and special tools for servicing and maintenance 1.1 CNC operating range X axis: ..... 1,502 mm Y axis: ..... 3,002 mm (bridge) Z axis clearance: ..... 300 mm A axis: ..... 12 degrees B axis: ..... +/- ∞ 1.2 Precision and feed Positioning precision: ..... ± 0.02 mm (per metre at 20°C) Repeatable precision: ..... ± 0.01 mm (per metre at 20°C) Max. feed: ..... 60 m/min A axis feed: ..... 360 deg/s B axis feed: ..... 360 deg/s 1.3 Dimensions & weight Length: ..... approx. 3,750 mm (incl. high-pressure tubing) Width: ..... approx. 4,700 mm Height: ..... approx. 3,400 mm (incl. high-pressure tubing) Weight: ..... 1,500 kg (without water) 2. High pressure pump ECOTRON® 40.37 420 MPa max. design pressure 400 MPa max. permissible operating pressure 380 MPa max. continuous operating pressure 3.8 l/min max. flow rate 37 kW driving power 2.1 Technical details Drive hydraulics with axial piston pump and hydraulic pressure/flow rate control Fjdpfx Alevla U Teqsgb Gear pump for separate cooler/filter circuit Pressure intensifier with drive cylinder and high pressure cylinder 2.49 litre pulsation damper according to Pressure Equipment Directive 97/23/EC Connection for external emergency stop circuit Electrical and electronic components fitted in control cabinet Hydraulic and high pressure components mounted on a common base frame Compact design, all tubing fitted, all pipework fitted and wired 2.2 Options Included Automatic pressure adjustment from 50 - 400 MPa Cooling via oil/water heat exchanger Pressure relief valve with pneumatic control Check valve on the feed water inlet Double filter element for pre-filtration of the feed water Sound insulation casing Special tools for fitting the high pressure seals incl. torque wrench Water stop check valve Included: machine, high pressure pump, control unit (PC in electronic box), abrasive, spare parts

Year of construction: 2015, condition: used, functionality: fully functional, The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Fodpfx Asyyxp Relqogb

Condition: used, functionality: fully functional, The REMS Magnum pipe threader is suitable for pipes from 1/4" to 2". The following threading dies are included: - 3x: R1/2 - 3/4 - 5x: R1 - 2 The unit has been function-tested and comes with an electrical inspection carried out by a professional electrical company. Fgedpfxeyyxi Rj Alqeb

Condition: used, Year of construction: 1979, Format: 920??1300 mm Equipment: Maximum sheet size 920??1300 mm, minimum size 560??1300 mm opening width within frame 920??1310 mm, maximum die size 910??1300 mm maximum die-cutting area 900??1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mm Fjdjy Iu Rtspfx Alqegb maximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/h infeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h. Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t

Condition: new, Year of construction: 2023, New fiber lasers from the HLE series - Optimized equipment with an eye on the essentials - low acquisition costs despite high-quality components. Max Photonics resonator, Precitec cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: PRECITEC LIGHT CUTTER - Auto focus Resonator 3KW (6KW/8KW/12KW optional) Automatic changing table including light barriers Suction DONALDSON - DFOE CE certified BECKHOFF control with touchscreen Sheet format 3,000mm x 1500mm (4,000 x 2,000 optional) Max sheet thickness at 3KW FE 15m Fgsdpjqgcx Ujfx Alqjb VA 10mm ALU 10mm CU 6mm Connection value max. 30kW Installation area approx. 9,000mm x 3,000mm x 2,200mm The machine is included 24 month guarantee CAD CAM software Libellula [CUT] 1 license Installation Delivery within Germany and Software/operator training offered Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials to test. We would be happy to invite you to come and cut your drawings or material. We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 15 years, of which we have been selling their fiber lasers for around 8 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. An identical HLE1530 3kW can be tested with us at any time. Call us and visit us!

Condition: new, Year of construction: 2023, laser power: 8,000 W, Fiber laser machine HLF from stock, available for short notice. We have to test an identical machine under power. Power: 8kW Sheet format: 3000 x 1500mm Automatic changing table including ball rollers for scratch-free workpiece positioning Siemens touchscreen control with LAN/USB Siemens drives Precitec Auto Focus Procutter cutting head Sheet metal measurement IPG resonator with 8kW / alternatively MAX Photonics Small parts conveyor belt will include: guarantee CAD/CAM software Installation Delivery (within Germany) Fgodpeqgcwtofx Alqjb Donaldson suction Training offered The machine is a stock machine and is therefore available at short notice. We already have 300+ similar and identical machines under power in Germany and Europe. Reference visits to users are possible at any time. Give us a call !

Condition: new, Year of construction: 2023, laser power: 6,000 W, New fiber lasers from the HLB series - optimized equipment with an eye on the essentials - low acquisition costs Max Photonics resonator, Raytools auto focus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: Raytools - Auto Focus Resonator 6KW Automatic changing table including light barriers Suction: Welldone CE certified Cypcut control with touchscreen including online programming directly on the control Sheet format 3,000mm x 1500mm Connection value max. 30kW Installation area approx. 9,000mm x 3,000mm x 2,200mm The machine is included 12 month guarantee Installation Delivery within Germany and Software/operator training offered Fedpfsqt Dcpjx Alqegb Optional: Offline programming CAD CAM software Libellula [CUT] Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials for testing. We would be happy to invite you to come and cut your drawings or material. We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 15 years, of which we have been selling their fiber lasers for around 8 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. Call us and visit us!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2023, fiber laser cutting machine power: 6000W, optional 12kW table size: 4000x2000mm pallet changer Siemens controller Siemens drives THK guides Precitec Procutter auto focus torch Max Photonics resonator chip conveyor CE warranty offered with: Fgsdovdq U Uepfx Alqob warranty CAD / CAM software setup delivery (optional) training this is an exhibition machine and could be tested under power any time. please contact us

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 6,000 W, warranty duration: 24 months, Equipment: CE marking, STOCK MACHINE - IMMEDIATELY AVAILABLE New fiber lasers from the HLB series - optimized equipment with an eye on the essentials - low acquisition costs Max Photonics resonator, Raytools auto focus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: Raytools - Auto Focus Resonator 6KW Automatic changing table including light barriers Suction: Welldone CE certified Cypcut control with touchscreen including online programming directly on the control Sheet format 4,000mm x 2000mm Connection value max. 30kW Installation area approx. 11,000mm x 4,000mm x 2,200mm Fgodpfoywufiox Alqjb The machine is included 24 month guarantee Installation Delivery within Germany and Software/operator training offered Optional: Offline programming CAD CAM software Libellula [CUT] Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials for testing. We would be happy to invite you to come and cut your drawings or material. We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 15 years, of which we have been selling their fiber lasers for around 8 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. Call us and visit us!

Year of construction: 2019, condition: refurbished (used), fiber laser cutting machine power: 3000W table size: 3000x1500mm pallet changer Siemens controller with touch screen Siemens drives THK guides Precitec Procutter auto focus torch IPG resonator chip conveyor CE offered with: warranty Fjdpfxshturns Alqegb CAD / CAM software setup delivery (optional) training this machine can be tested under power any time. please contact us

Year of construction: 2007, condition: excellent (used), TOP CONDITION - OVERHAULED IN 2022! Year of construction: 2007 Table format: 3000 x 1500 x 100 mm Power: 4000W Control: Mazatrol preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick piercing incl. ball roller table incl. 4 x head change magazine incl. 2 cutting heads Fgedpfx Ashturvolqjb incl. 10 x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high pressure cutting up to 20 bar No Foundation is necessary! Optional automatic loading and unloading by Mazak CELL510 could be offered with warranty / commissioning / training always regularly serviced