Used Stamp Holder for sale (7,525)

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation Hedpfjdzqltjx Ag Ienl - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Hnodpfeu Rwa Isx Ag Iel Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Hsdpfei A A Tbjx Ag Ionl Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC - New Lubrication System Hodeh N Di Djpfx Ag Isnl - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: excellent (used), Gauge block connectors and universal holders Hjdpfx Aeylkdpeg Isnl System KOBA Z 101 Hommelwerke as a set in case (108149)

Condition: used, functionality: fully functional, Ferwood code: RU0009932 - Manufacturer code: 4-014-12-0207 - Condition: Used - Functionality: Fully operational - Compatible machine: - If interested, we offer an overhaul service. Please contact us. 1KG - 20X20X20 Hodpfxeyk Edus Ag Ijnl

Condition: excellent (used), 1 lot SK 50 shots (28556) Hedpfjuir Unjx Ag Ijnl approx. 65 pieces approx.250 kg without pallet

Condition: excellent (used), Professional set of milling and drilling tool holders with SK40 / ISO40 taper, compliant with DIN 69871 A standard. The set includes approximately 25 ready-to-use tools with mounted milling cutters and drills. Tool diameter range: from Ø4 mm to Ø12 mm – an ideal set for serial production. Holder length: 50 mm – compact and precise, perfect for CNC machining centers. The set includes various tool types: end mills, taps, countersinks, solid carbide drills, and chamfer mills. Some tools are coated – suitable for machining steel, stainless steel, aluminium, and cast iron. All holders are used and in good technical condition – inspected and ready for immediate use. Products from renowned brands: ZÜRN Germany and Orion. Option to purchase the entire set or individual items. Hjdpfoxldr Ejx Ag Isnl

Condition: excellent (used), • Original ZÜRN milling toolholder, Germany • Type: SK40 – TC40x06x100-AD (DIN 69871) • High manufacturing precision, balanced for CNC operation • Tool shank Ø6 mm, length 100 mm • Robust design – Made in Germany • Very good condition, ready for use Hnodpfxjxcx Sus Ag Iel

Condition: excellent (used), For sale: a complete set of SK40 tool holders in Ø10 size, brands HOLEX and Orion. Manufactured according to DIN 69871 AD/B, suitable for professional CNC machining centers. Technical data: • Taper: SK40 • Clamping: Ø10 mm • Standard: DIN 69871 AD/B • Manufacturers: HOLEX, Orion • Condition: used, fully functional, in good technical condition (visible signs of use). Applications: • End mills Ø10 • Drills Ø10 • Counterbores Ø10 Hedpfoxcy S Aox Ag Ionl

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Mounting type: SK40 Sleeve: Ø12 mm Grip length: 50 mm Standard: DIN 69871 AD/B Hsdpfxoxcg H He Ag Ienl Condition: used, fully functional, ready for operation Please note that several units are available, all in the same Ø12×50 size.

Condition: excellent (used), For sale: professional milling tool holders from the brands HOLEX (Hoffmann Group) and ORION. • Type SK40 Ø6-50 (Weldon – side screw) • Standard DIN 69871 AD – central cooling through spindle • Clamping diameter: Ø6 mm • Length: 50 mm • Balancing G 6.3 – up to 12,000 rpm (HOLEX) • Very good condition, used – fully operational • Some holders are sold with milling cutters/drills included. Hsdexcgzdopfx Ag Ionl

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Hodpfx Agoxcgyto Ienl

Condition: excellent (used), For sale: Professional SK40 ER40 tool holders from renowned manufacturers including Diebold and ZÜRN – Germany. Complete holders, some equipped with collets and tools (drills, milling cutters, taps). Holder type: SK40 – ER40. Models include: TC40xER40x70-AD. Manufacturers: Diebold / ZÜRN Germany. In very good condition, technically sound – ready for use. Robust, precise design and German premium quality. Applications: CNC machining centers, milling machines, tool workshops. Hnedpfx Aexcbxqjg Isl

Condition: excellent (used), For sale: Single TC40xER16x100-AD tool holder (SK40 standard) from the renowned brand ZÜRN – Germany. Each tool holder is complete, equipped with an ER16 collet and a mounted tool (drill or milling cutter – see photo). Tool holder type: TC40xER16x100-AD (SK40). Collet: ER16 – ZÜRN Germany. Working length: 100 mm. Manufacturer: Made in Germany. Tool included – ready for use. Very good condition, original, tested. Applications: CNC machining centers, milling machines, tool workshops. Hnsdpoxcb Dasfx Ag Iel

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Hsdpfx Aow Sy D Eog Ijnl

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Hsdpfxjw Sfpte Ag Ienl

Condition: good (used), 35 pcs. VDI 20 holders as shown in the photos Hnjdpfx Aoykivueg Iel 6 of them driven In good condition, immediately available from stock.

Condition: refurbished (used), Year of construction: 1988, CARLO SALVI 635 SV refurbished acc. CE Standards 6,35x70 mm. 360 ppm Available with RF system to produce semitubular parts. - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central Hsdpeh N Dh Aefx Ag Isnl - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl HBR will provide at total revision.

Year of construction: 2000, condition: good (used), Platen-type equipment designed for die cutting, creasing, and perforating cardboard and corrugated board. Maximum sheet size: 720 × 520 mm. Output: up to 25–28 cycles per minute. Motor power: 2.2 kW. Weight: approx. 2000 kg Hsdpfxeyb Tc Hs Ag Ijnl No documentation available.

Condition: good (used), Measuring stand, tripod, dial gauge holder, dial gauge, test stand, dial gauge holder, precision measuring table, precision measuring table, micrometer holder, dial gauge stand, magnetic measuring stand, dial gauge stand - Dial gauge holder: with knurled nut mount Ø 8 mm -Item No.: T08043-0 -Hole spacing: Ø 112 x 7 mm -Number: 22x holders available Price: per piece -Dimensions: 130/38/H400 mm -Weight: 0.3 kg/piece Hodpfoyiz Aqex Ag Isnl

Condition: used, This listing is for the 3M Zeta Plus Hnjdeyq Ryuepfx Ag Iol

Condition: used, Year of construction: 2001, functionality: fully functional, Technical Specifications Press capacity: 800 kN (80 tons) Stroke rate: 60 – 320 strokes per minute (SPM) Hnjdpfoyidnysx Ag Iel Stroke adjustment: 8 – 80 mm Ram adjustment (shut height adjustment): 80 mm Table size: 830 × 700 mm Bolster plate thickness: 80 mm Table opening: 500 × 200 mm Strip feed height over table: 120 mm Ram area: 500 × 400 mm Ram bore: Ø 50 × 90 mm Ram centering bore tolerance: 30 H7 mm Precision guided ram, multi-roller guidance system. Main motor power: 23 kW Drive system: Flywheel drive with planetary gearbox and pneumatic clutch/brake combination. Machine weight: approx. 8000 kg Gripper Feed Schaal SZV 3: Feed length: 4 – 150 mm Strip width: 10 – 270 mm Strip thickness: 0.1 – 4 mm We also have on stock Schaal SEP 80 with SWV3E 300 mm wide Servo Feeder. Unidor Control, Machine and Operator Safety. Full Technical Documentation in German including Parts list and Technical drawings.

Condition: good (used), Cleaning roll holder, floor stand, cleaning cloth roll holder -Manufacturer: Tork, Floor stand for cleaning cloth roll with waste bin -Type: W1 -Roller width: up to approx. 450 mm -Quantity: 5x cleaning roll holders available -Price: per piece Hnedpfxjr Im R Aj Ag Ijl -Dimensions: 710/590/H1010 mm -Weight: 8.1 kg/pc.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Hodovz Hvcepfx Ag Ionl Weight 35 kg Total power requirement 0 kw